NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, November 5, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Biosafety/Listings.asp?TradeName=+&

NSF/ANSI 49
Class II (Laminar Flow) Biosafety Cabinetry

Cabinet Style
A = Bench Unit With Base or Adjustable Legs Provided
B = Bench Unit Without Base or Adjustable Legs Provided
C = Console

Window Type
H = Hinged
S = Sliding
F = Fixed

Bench Height
NA = Not Applicable
NP = Not Provided

CBV = Concurrent Balance Value

Due to a change in nomenclature in NSF/ANSI 49 - 2002 “Class II (Laminar Flow) Biosafety Cabinetry,” Class II, Type A cabinets are now referred to as Class II, Type A1 and Class II, Types B3 and A/B3 cabinets as Class II, Type A2. Class II, Types B1 and B2 cabinets remain unchanged.

Biosafety cabinet models Listed under NSF/ANSI 49 are approved for use with a power supply of 115V/60Hz, unless otherwise noted. If biosafety cabinets have been approved for use with additional power supplies, the power supply will be indicated in the Official Listing.

Across International LLC
111 Dorsa Avenue
Livingston, NJ 07039
United States
888-988-0899
Visit this company's website

Facility : Shandong, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

BC-2F[1]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
BC-3F[2]	A2	A	100 - 110	60 - 70	N/A	3	10S	27	Canopy Connection I.V. Pole U.V. Light
BC-4F[3]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
BC-4FB2[4]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	I.V. Pole U.V. Light
BC-6F[5]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole Canopy Connection U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. Canopy connection model number is 2T-C. [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. Canopy connection model number is 3T-C. [3] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. Canopy connection model number is 4T-C. [4] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. [5] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. Canopy connection model number is 6T-C.

AirClean Systems
2179 East Lyon Station Road
Creedmoor, NC 27522
United States
(919) 255-3220

Facility : Qingdao, Shandong, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

AC-36A2[1] [2]	A2	A	100 - 110	64 - 74	N/A	3	8S	27	U.V. Light Casters Hgt Adjustable Stand
AC-48A2[1] [3]	A2	A	100 - 110	64 - 74	N/A	4	8S	27	U.V. Light Casters Hgt Adjustable Stand
AC-72A2[1] [4]	A2	A	100 - 110	65 - 75	N/A	6	8S	27	U.V. Light Casters Hgt Adjustable Stand
[1] This cabinet model was Certified for use with power supplies of 100V/60Hz, 115V/60Hz, 230V/50Hz, 230V/60Hz [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 69 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2022. GFCI outlet is approved for this model. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 69 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2019. GFCI outlet is approved for this model. [4] Beginning with serial number BE0GGBEB200QHM7P0001. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 70 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2019.

Allentown, LLC
Route 526
Allentown, NJ 08501-0698
United States
609-259-7951
Visit this company's website

Facility : # 1 USA

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

39231xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	3	10S	36	Canopy Connection I.V. Pole U.V. Light
39232xxx2 Safety Cab.[1] [2]	A2	A	100 - 110	50 - 60	N/A	3	12S	36	Canopy Connection I.V. Pole U.V. Light
39238xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	3	8S	36	Canopy Connection I.V. Pole U.V. Light
39241xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	4	10S	36	Canopy Connection I.V. Pole U.V. Light
39242xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	4	12S	36	Canopy Connection I.V. Pole U.V. Light
39248xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	4	8S	36	Canopy Connection I.V. Pole U.V. Light
39251xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	5	10S	36	Canopy Connection I.V. Pole U.V. Light
39252xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	5	12S	36	Canopy Connection I.V. Pole U.V. Light
39258xxx2 Safety Cab.[1] [2]	A2	A	100 - 110	50 - 60	N/A	5	8S	36	Canopy Connection I.V. Pole U.V. Light
39261xxx2 Safety Cab.[1] [3]	A2	A	100 - 110	50 - 60	N/A	6	10S	36	Canopy Connection I.V. Pole U.V. Light
39262xxx2 Safety Cab.[1] [4]	A2	A	100 - 110	45 - 55	N/A	6	12S	36	Canopy Connection I.V. Pole U.V. Light
39268xxx2 Safety Cab.[1] [5]	A2	A	100 - 110	50 - 60	N/A	6	8S	36	Canopy Connection I.V. Pole U.V. Light
39241[1] [6]	A2	A	100 - 110	50 - 60	N/A	4	10S	36	Canopy Connection I.V. Pole U.V. Light
39242xxx1 Safety Cab.[1] [7]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	Canopy Connection I.V. Pole U.V. Light
39248[1] [6]	A2	A	100 - 110	50 - 60	N/A	4	8S	36	Canopy Connection I.V. Pole U.V. Light
39251[1] [6]	A2	A	100 - 110	50 - 60	N/A	5	10S	36	Canopy Connection I.V. Pole U.V. Light
39252xxx1 Safety Cab.[1] [8]	A2	A	100 - 110	55 - 65	N/A	5	12S	36	Canopy Connection I.V. Pole U.V. Light
39258[1] [6]	A2	A	100 - 110	50 - 60	N/A	5	8S	36	Canopy Connection I.V. Pole U.V. Light
39261[1] [6]	A2	A	100 - 110	50 - 60	N/A	6	10S	36	Canopy Connection I.V. Pole U.V. Light
39262xxx1 Safety Cab.[1] [7]	A2	A	100 - 110	55 - 65	N/A	6	12S	36	Canopy Connection I.V. Pole U.V. Light
39268[1] [6]	A2	A	100 - 110	50 - 60	N/A	6	8S	36	Canopy Connection I.V. Pole U.V. Light
[1] Certified for use with power supplies of 100V/50Hz, 100V/60Hz, 230V/50Hz, and 230V/60Hz. [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading measurement. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. pole and U.V. light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, H14 filter, cable pass-thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus II 328202x. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional sidewall pre-filter, H14 filter, ULPA filter, cable pass-thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus II 328202x. [4] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 50 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, H14 filter, ULPA filter, canopy model Ventus II 328202x. [5] Inflow nominal set point of 105 fpm was established with a direct airflow reading measurement. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. pole and U.V. light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus II 328202x. NOTE: Bench stand models 51733xx, 51713xx, 518Z3xx, 51863xx may be used with cabinets in the 39238xxx2/39231xxx2/39232xxx2 SC+ series. Bench stand models 51734xx, 51714xx, 518Z4xx, 51864xx may be used with cabinets in the 39248xxx2/39241xxx2/39242xxx2 SC+ series. Bench stand models 51735xx, 51715xx, 518Z5xx, 51865xx may be used with cabinets in the 39258xxx2/39251xxx2/39252xxx2 SC+ series. Bench stand models 51736xx, 51716xx, 518Z6xx, 51866xx may be used with cabinets in the 39268xxx2/39261xxx2/39262xxx2 SC+ series. All bench stand models beginning with 518 may be used with or without the optional wheel kit (PN# 5190100). [6] Inflow nominal set point of 105 fpm was established with a direct airflow reading measurement. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. pole and U.V. light removed. This cabinet model was Certified to NSF/ANSI 49-2012. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord and Cable Portal. [7] Inflow nominal set point of 105 fpm was established with a direct airflow reading measurement. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. pole and U.V. light removed. This cabinet model was Certified to NSF/ANSI 49-2018. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord and Cable Portal. [8] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2018. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord & Cable Portal.

Baker Company, Inc. (The)
175 Gatehouse Road
Sanford, ME 04073
United States
800-992-2537
207-324-8773
Visit this company's website

Facility : Sanford, ME

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

BCG401[1]	B2	C	100 - 110	35 - 45	664 @ 1.6	4	8S	35	I.V. Pole U.V. Light Casters
BCG601[1]	B2	C	100 - 110	35 - 45	993 @ 1.6	6	8S	35	I.V. Pole U.V. Light
SG404[2] [3] [4] [5]	A2	A	100 - 110	45 - 55	N/A	4	8S	37	I.V. Pole U.V. Light Casters Canopy Connection
SG404[2] [3] [4] [5]	A2	A	100 - 110	45 - 55	N/A	4	10S	37	I.V. Pole U.V. Light Casters Canopy Connection
SG404[2] [3] [4] [5]	A2	A	100 - 110	45 - 55	N/A	4	12S	37	I.V. Pole U.V. Light Casters Canopy Connection
SG504[2] [3] [5] [6]	A2	A	100 - 110	45 - 55	N/A	5	8S	37	I.V. Pole U.V. Light Casters Canopy Connection
SG504[2] [3] [5] [6]	A2	A	100 - 110	45 - 55	N/A	5	10S	37	I.V. Pole U.V. Light Casters Canopy Connection
SG504[2] [3] [5] [7]	A2	A	100 - 110	43 - 53	N/A	5	12S	37	I.V. Pole U.V. Light Casters Canopy Connection
SG604[2] [3] [5] [8]	A2	A	100 - 110	46 - 56	N/A	6	8S	37	Casters Canopy Connection I.V. Pole U.V. Light
SG604[2] [3] [5] [6]	A2	A	100 - 110	45 - 55	N/A	6	10S	37	Casters Canopy Connection I.V. Pole U.V. Light
SG604[2] [3] [5] [9]	A2	A	100 - 110	40 - 50	N/A	6	12S	37	Canopy Connection Casters I.V. Pole U.V. Light
[1] Beginning with serial number 103539 for the 4-foot model and serial number 103706 for the 6-foot model. Inflow nominal setpoint of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate calculated method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor), without adjusting cabinet airflow balance. Downflow nominal set point was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2010a. This cabinet qualifies only with the armrest installed. This cabinet is approved with additional petcocks on the sidewalls and a low static pressure exhaust plenum. Cabinet models BCG401 INT and BCG601 INT are Certified for alternate motor/blower combinations and input power supply. [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate calculated method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor, if applicable). [3] Baker model designations SG404-AUS and SG604-AUS are Certified to NSF/ANSI 49-2022 for operation at 220V/50Hz with an 8-inch window opening. Baker model designations SG404-INT, SG504-INT, and SG604-INT are Certified to NSF/ANSI 49-2022 for operation at either 220V/50Hz or 220V/60Hz. [4] Beginning with serial number 110235. Downflow nominal set point of 50fpm was established with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet qualifies only with the armrest installed. FlexAir Canopy connection 333A745 is approved for use with this model. [5] The maximum height for the fixed height stand with casters is 31 inches. The maximum height for the adjustable height Channel stand, with bullet feet is 37 inches. [6] Beginning with serial number 110795. Downflow nominal set point of 50 fpm was established with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet qualifies only with the armrest installed. FlexAir Canopy connection 336A745 is approved for use with this model. [7] Beginning with serial number 110795. Downflow nominal set point of 48 fpm was established with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet qualifies only with the armrest installed. FlexAir Canopy connection 336A745 is approved for use with this model. [8] Beginning with serial number 110555. Downflow nominal set point of 51 fpm was established with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet qualifies only with the armrest installed. FlexAir Canopy connection 336A745 is approved for use with this model. [9] Beginning with serial number 110555. Downflow nominal set point of 45 fpm was established with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet qualifies only with the armrest installed. FlexAir Canopy connection 336A745 is approved for use with this model.

Bioair S.p.A.
Via Pagano, 61
20145 Milan
Italy
39 03 826 6721
Visit this company's website

Facility : Siziano, Italy

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

SM-49 (Code: LDS4322)[1]	A2	A	100 - 110	60 - 70	N/A	4	10S	35	Canopy Connection Casters I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional touchscreen switch, petcock(s), cable ports(s), AZ1S304 Thimble adapter canopy connection, a fixed stand with casters (Max Ht. 28"), an adjustable stand with feet (Max Ht. 35"), and a hydraulic stand with casters (Max Ht. 35").

CHC Biotech Co., Ltd.
2nd Floor of W1 Building
150 Gwahakseongjang-ro
Yuseong-gu, Daejeon 305-500
Republic of Korea
82 42 936 5530
Visit this company's website

Facility : CHC Biotech Co., Ltd. – Republic of Korea

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

NB-704[1] [2]	A2	A	100 - 110	55 - 65		4	8S	26	I.V. Pole U.V. Light
NB-706[1] [2]	A2	A	100 - 110	55 - 65		6	8S	26	I.V. Pole U.V. Light
[1] Certified for use with power supplies of 115V/60 Hz, 230V/50 Hz and 230V/60 Hz. [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's alternate recommended method with thermal anemometer in a constricted (3 inch high) access opening consult manufacturer's operator's manual for appropriate correction factor), without adjusting cabinet airflow balance. Downflow nominal set point was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. This cabinet qualifies only with the armrest installed.

Chung Fu Technical Development Co., Ltd.
7F, No. 687, Mintsu East Road
Taipei 105
Taiwan
886 2 2600 1761
Visit this company's website

Facility : New Taipei City, Taiwan

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

AHA-133-AA-B[1] [2]	A2	A	100 - 110	54 - 64	N/A	4	10S	28	I.V. Pole U.V. Light
AHA-133-AB-B[1] [2] [3]	A2	A	100 - 110	54 - 64	N/A	4	10S	28	I.V. Pole U.V. Light
AHA-133-AC-B[1] [2] [4]	A2	A	100 - 110	54 - 64	N/A	4	10S	28	I.V. Pole U.V. Light
AHA-133-CA-B[1] [5]	A2	A	100 - 110	54 - 64	N/A	4	10S	28	I.V. Pole U.V. Light
AHA-133-CB-B[1] [3] [5]	A2	A	100 - 110	54 - 64	N/A	4	10S	28	I.V. Pole U.V. Light
AHA-133-CC-B[1] [4] [5]	A2	A	100 - 110	54 - 64	N/A	4	10S	28	I.V. Pole U.V. Light
AHA-193-AA-A[2] [6]	A2	A	100 - 110	54 - 64	N/A	6	8S	29	I.V. Pole U.V. Light
AHA-193-AB-A[2] [3] [6]	A2	A	100 - 110	54 - 64	N/A	6	8S	29	I.V. Pole U.V. Light
AHA-193-AC-A[2] [4] [6]	A2	A	100 - 110	54 - 64	N/A	6	8S	29	I.V. Pole U.V. Light
AHA-193-CA-A[5] [6]	A2	A	100 - 110	54 - 64	N/A	6	8S	29	I.V. Pole U.V. Light
AHA-193-CB-A[3] [5] [6]	A2	A	100 - 110	54 - 64	N/A	6	8S	29	I.V. Pole U.V. Light
AHA-193-CC-A[4] [5] [6]	A2	A	100 - 110	54 - 64	N/A	6	8S	29	I.V. Pole U.V. Light
AHB-133-AA-A[2] [7]	B2	B	100 - 110	54 - 64	N/A	4	8S	34	I.V. Pole U.V. Light
AHB-133-AB-A[2] [3] [7]	B2	B	100 - 110	54 - 64	N/A	4	8S	34	I.V. Pole U.V. Light
AHB-133-AC-A[2] [4] [7]	B2	B	100 - 110	54 - 64	N/A	4	8S	34	I.V. Pole U.V. Light
[1] Beginning with serial number AHA1608060. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 59 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. Chung Fu Technical Development Co., Ltd. Models AHA-133-AA-B, AHA-133-AB-B, AHA-133-AC-B, AHA-133-CA-B, AHA-133-CB-B and AHA-133-CC-B are marketed by Air Science, LLC, USA as Air Science Models AS-AHA-133-AA-B, AS-AHA-133-AB-B, AS-AHA-133-AC-B, AS-AHA-133-CA-B, AS-AHA-133-CB-B and AS-AHA-133-CC-B, respectively. [2] Control panel is touch screen on this model. [3] Certified for use with power supplies of 230V/50Hz and 230V/60Hz. [4] Certified for use with power supplies of 100V/50Hz and 100V/60Hz. [5] Control panel is membrane switch on this model. [6] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. The downflow nominal set-point of 59 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Chung Fu Technical Development Co., Ltd. Models AHA-193-AA-A, AHA-193-AB-A,AHA-193-AC-A, AHA-193-CA-A, AHA-193-CB-A and AHA-193-CC-A are marketed by Air Science, LLC, USA as Air Science Models AS-AHA-193-AA-A, AS-AHA-193-AB-A, AS-AHA-193-AC-A, AS-AHA-193-CA-A, AS-AHA-193-CB-A and AS-AHA-193-CC-A, respectively. [7] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. The downflow nominal set-point of 59 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022.

Design Filtration Microzone Inc.
86 Harry Douglas Drive
Ottawa, ON K2S 2C7
Canada
613-831-8318
Visit this company's website

Facility : Shandong Province, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

BK-3-4[1]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	Canopy Connection I.V. Pole U.V. Light
BK-3-6[2]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole U.V. Light Canopy Connection
BK3-4[3]	A2	A	100 - 110	60 - 70	N/A	4	8S	27	I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. Canopy connection model number is 4FT-CC. [2] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. Canopy connection model number is 6FT-CC. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set-point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set-point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2012. Approved for alternate power modes of 115V/60Hz, 220V/50Hz and 220V/60Hz. Canopy connection model number is 4FE-CC.

Esco Micro Pte Ltd
21 Changi South Street 1
486777
Singapore
65 6542 0833
Visit this company's website

Facility : Kepulauan Riau, Indonesia

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

AC2-3E8-NS G4 8"[1] [2]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-3E9-NS G4 8"[1] [3]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-3J7 G4 8"[1] [4]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-3N7 G4 8" [1] [4]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-3S8-NS G4 8"[1] [2]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-3S9-NS G4 8"[1] [3]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-3Y7 G4 8"[1] [4]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4E8-NS G4 10"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4E8-NS G4 8"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4E9-NS G4 10"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4E9-NS G4 8" [3] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4J7 G4 10"[4] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4J7 G4 8"[4] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4N7 G4 10"[4] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4N7 G4 8"[4] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4S8-NS G4 10"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4S8-NS G4 8"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4S9-NS G4 10"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4S9-NS G4 8"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4Y7 G4 10"[4] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-4Y7 G4 8"[4] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5E8 NS G4 10"[2] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5E8-NS G4 8"[2] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5E9 NS G4 10"[3] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5E9-NS G4 8"[3] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5J7 G4 10"[4] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5J7 G4 8" [4] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5N7 G4 10"[4] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5N7 G4 8"[4] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5S8 NS G4 10"[2] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5S8-NS G4 8"[2] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5S9 NS G4 10"[3] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5S9-NS G4 8"[3] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5Y7 G4 10"[4] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-5Y7 G4 8"[4] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6E8-NS G4 10"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6E8-NS G4 8"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6E9-NS G4 10"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6E9-NS G4 8"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6J7 G4 10"[4] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6J7 G4 8"[4] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6N7 G4 10"[4] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6N7 G4 8"[4] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6S8-NS G4 10" [2] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6S8-NS G4 8"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6S9-NS G4 10"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6S9-NS G4 8"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6Y7 G4 10"[4] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AC2-6Y7 G4 8"[4] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-3E8 G4 8"[1] [2]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-3E9 G4 8"[1] [3]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-3S8 G4 8"[1] [2]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-3S9 G4 8"[1] [3]	A2	A	100 - 110	55 - 65	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4E8 G4 10"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4E8 G4 8"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4E9 G4 10"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4E9 G4 8"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4S8 G4 10"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4S8 G4 8"[2] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4S9 G4 10"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-4S9 G4 8"[3] [5]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5E8 G4 10"[2] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5E8 G4 8"[2] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5E9 G4 10"[3] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5E9 G4 8"[3] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5S8 G4 10"[2] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5S8 G4 8"[2] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5S9 G4 10"[3] [13]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-5S9 G4 8"[3] [6]	A2	A	100 - 110	55 - 65	N/A	5	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6E8 G4 10"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6E8 G4 8"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6E9 G4 10"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6E9 G4 8"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6S8 G4 10"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6S8 G4 8"[2] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6S9 G4 10"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
AR2-6S9 G4 8"[3] [7]	A2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light Canopy Connection
LA2-4J7 G4 10"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-4J7 G4 12"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LA2-4J7 G4 8"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LA2-4N7 G4 10"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-4N7 G4 12"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LA2-4N7 G4 8"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LA2-4S8 G4 10"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-4S8 G4 12"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LA2-4S8 G4 8"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LA2-4S9 G4 10"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-4S9 G4 12"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LA2-4S9 G4 8"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LA2-4Y7 G4 10"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-4Y7 G4 12"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LA2-4Y7 G4 8"[4] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LA2-5J7 G4 10"[4] [9]	A2	A	100 - 110	60 - 70	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-5N7 G4 10"[4] [9]	A2	A	100 - 110	60 - 70	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-5S8 G4 10"[2] [9]	A2	A	100 - 110	60 - 70	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-5S9 G4 10"[3] [9]	A2	A	100 - 110	60 - 70	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-5Y7 G4 10"[4] [9]	A2	A	100 - 110	60 - 70	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6J7 G4 10"[4] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6J7 G4 12"[4] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6N7 G4 10"[4] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6N7 G4 12"[4] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6S8 G4 10"[2] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6S8 G4 12"[2] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6S9 G4 10"[3] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6S9 G4 12"[3] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6Y7 G4 10"[4] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LA2-6Y7 G4 12"[4] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
LB2-4B7 G4[4] [11]	B2	A	100 - 110	55 - 65	887 @ 1.9	4	8S	35	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-4B8 G4[2] [11]	B2	A	100 - 110	55 - 65	887 @ 1.9	4	8S	35	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-4B9 G4[3] [11]	B2	A	100 - 110	55 - 65	887 @ 1.9	4	8S	35	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-4Y7 G4[4] [11]	B2	A	100 - 110	55 - 65	887 @ 1.9	4	8S	35	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-4Y8 G4[2] [11]	B2	A	100 - 110	55 - 65	887 @ 1.9	4	8S	35	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-4Y9 G4[3] [11]	B2	A	100 - 110	55 - 65	887 @ 1.9	4	8S	35	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-6B7 G4[4] [12]	B2	A	100 - 110	55 - 65	1276 @ 2.7	6	8S	34	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-6B8 G4[2] [12]	B2	A	100 - 110	55 - 65	1276 @ 2.7	6	8S	34	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-6B9 G4[3] [12]	B2	A	100 - 110	55 - 65	1276 @ 2.7	6	8S	34	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-6Y7 G4[4] [12]	B2	A	100 - 110	55 - 65	1276 @ 2.7	6	8S	34	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-6Y8 G4[2] [12]	B2	A	100 - 110	55 - 65	1276 @ 2.7	6	8S	34	I.V. Pole U.V. Light Bag-In/ Bag-Out
LB2-6Y9 G4[3] [12]	B2	A	100 - 110	55 - 65	1276 @ 2.7	6	8S	34	I.V. Pole U.V. Light Bag-In/ Bag-Out
LR2-4S8 G4 10"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LR2-4S8 G4 12"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LR2-4S8 G4 8"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LR2-4S9 G4 10"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	10S	36	I.V. Pole U.V. Light Canopy Connection
LR2-4S9 G4 12"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
LR2-4S9 G4 8"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	8S	36	I.V. Pole U.V. Light
LR2-5S8 G4 10"[2] [9]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LR2-5S9 G4 10"[3] [9]	A2	A	100 - 110	55 - 65	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
LR2-6S8 G4 10"[2] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LR2-6S8 G4 12"[2] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
LR2-6S9 G4 10"[3] [8]	A2	A	100 - 110	55 - 65	N/A	6	10S	36	I.V. Pole U.V. Light Canopy Connection
LR2-6S9 G4 12"[3] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
VA2-4S8 G4 12"[2] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
VA2-4S9 G4 12"[3] [8]	A2	A	100 - 110	55 - 65	N/A	4	12S	36	I.V. Pole U.V. Light
VA2-6S8 G4 12"[2] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
VA2-6S9 G4 12"[3] [10]	A2	A	100 - 110	65 - 75	N/A	6	12S	36	I.V. Pole U.V. Light Canopy Connection
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. [2] Certified for use with a power supply of 230V/50Hz and 230V/60Hz. [3] Certified for use with a power supply of 110V-120V/50Hz and 110V-120V/60Hz. [4] Approved for alternate power modes of 100V/50Hz and 100V/60Hz. [5] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. [6] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. [7] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. [8] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. [9] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. [10] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 70 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. [11] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. [12] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. [13] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2024.

Germfree Laboratories, LLC
4 Sunshine Boulevard
Ormond Beach, FL 32174
United States
386-265-4360
Visit this company's website

Facility : Ormond Beach, FL

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

BSCA-4	A2	A	100 - 110	54 - 64 54 - 64 40 - 50	N/A	4	10S	32	I.V. Pole Canopy Connection

[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading
    instrument. This nominal set point was confirmed using the manufacturer's recommended 
    alternate method with thermal anemometer in a constricted (3 inch high) access opening 
    (consult manufacturer for appropriate correction factor, if applicable), without
    adjusting cabinet airflow balance. The acceptable non-uniform downflow ranges listed
    above begin with zone 1 (54-64 fpm) closest to the back wall of the cabinet, zone 2
    (54-64 fpm) center of the cabinet, and end with zone 3 (40-50 fpm) closest to the front
    sliding window.  Downflow nominal set points were established with the I.V. Pole
    removed.  This cabinet model was Certified to NSF/ANSI 49-2020.  This cabinet qualifies
    only with the armrest installed. Certified for use with a power supply of 100V/50Hz/60Hz
    and 230V/50Hz/60Hz. Additional options are I.V. pole, canopy model BSCA-4C, casters and
    modified-passthrough.

iGene Labserve Private Limited
16/2, Ashok Nagar
New Delhi
110018
India
91 11 79613060

Facility : Shandong, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

IG-CIIA222G[1] [5]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
IG-CIIA222N[1] [5]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
IG-CIIA242G[2] [5]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	U.V. Light Canopy Connection I.V. Pole
IG-CIIA242N[2] [5]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	U.V. Light Canopy Connection I.V. Pole
IG-CIIB242G[3] [5]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	U.V. Light I.V. Pole
IG-CIIB242N[3] [5]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	U.V. Light I.V. Pole
IG-CIIA262G[4] [5]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	U.V. Light Canopy Connection I.V. Pole
IG-CIIA262N[4] [5]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	U.V. Light Canopy Connection I.V. Pole
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Certified canopy connection model is 2FT-CC. [2] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified canopy connection model is 4FT-CC. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. [4] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified canopy connection model is 6FT-CC. [5] Certified for use with power supplies of 115V/60/Hz, 230V/50Hz and 230V/60Hz.

Jinan Biobase Biotech Co., Ltd.
North side of Jiwang Road, Mingshui
Economic Dev. Zone, Zhangqiu Jinan
Shandong Province 250200
China
+86 531 67965823
Visit this company's website

Facility : # 37 China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

BSC-2FA2-GL[1] [7]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
BSC-2FA2-NA[1] [7]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
BSC-3FA2-GL[2] [7]	A2	A	100 - 110	60 - 70	N/A	3	10S	27	Canopy Connection I.V. Pole U.V. Light
BSC-3FA2-NA[2] [7]	A2	A	100 - 110	60 - 70	N/A	3	10S	27	Canopy Connection I.V. Pole U.V. Light
BSC-4FA2[3]	A2	A	100 - 110	60 - 70	N/A	4	8S	27	I.V. Pole U.V. Light
BSC-4FA2-GL[4] [7]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
BSC-4FA2-NA[4] [7]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
BSC-4FB2-GL[5] [7]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	I.V. Pole U.V. Light
BSC-4FB2-NA[5] [7]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	I.V. Pole U.V. Light
BSC-6FA2-GL[6] [7]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole Canopy Connection U.V. Light
BSC-6FA2-NA[6] [7]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole Canopy Connection U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Certified canopy connection model number is 2FT-CC. [2] Beginning with serial number NA3FAT220600001AY. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. Certified canopy connection model number is 3FT-CC. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2012. Approved for alternate power modes of 115V/60Hz, 220V/50Hz and 220V/60Hz. Certified canopy connection model number is 4FE-CC. [4] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified canopy connection model number is 4FT-CC. [5] Beginning with serial number 4FB18050001. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. [6] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified canopy connection model number is 6FT-CC. [7] Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz.

Kewaunee Scientific Corporation
2700 West Front Street
Statesville, NC 28677
United States
704-873-7202
Visit this company's website

Facility : Karnataka, India

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

INT-B1400-2[1] [2]	B2	A	100 - 110	55 - 65	937@2.4	4	8S	36	I.V. Pole U.V. Light
INT-B2000-2[1] [2]	B2	A	100 - 110	55 - 65	1416@2.0	6	8S	36	I.V. Pole U.V. Light
[1] Also Certified for use with power supplies of 230V/50Hz and 230V/60Hz. Model numbers may be followed by -230 suffix. [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016.

Labconco Corporation
8845 Prospect
Kansas City, MO 64132
United States
816-333-8811 X771
Visit this company's website

Facility : Kansas City, MO

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

30231xxx2 Logic[1] [2]	A2	A	100 - 110	50 - 60	N/A	3	10S	36	I.V. Pole U.V. Light Canopy Connection
30232xxx2 Logic[1] [2]	A2	A	100 - 110	50 - 60	N/A	3	12S	36	I.V. Pole U.V. Light Canopy Connection
30238xxx2 Logic[1] [2]	A2	A	100 - 110	50 - 60	N/A	3	8S	36	I.V. Pole U.V. Light Canopy Connection
30241xxx2 Logic[2] [3]	A2	A	100 - 110	50 - 60	N/A	4	10S	36	Canopy Connection I.V. Pole U.V. Light
30242xxx2 Logic[2] [3]	A2	A	100 - 110	50 - 60	N/A	4	12S	36	Canopy Connection I.V. Pole U.V. Light
30248xxx2 Logic[2] [3]	A2	A	100 - 110	50 - 60	N/A	4	8S	36	Canopy Connection I.V. Pole U.V. Light
30251xxx2 Logic[2] [4]	A2	A	100 - 110	50 - 60	N/A	5	10S	36	I.V. Pole U.V. Light Canopy Connection
30252xxx2 Logic[2] [4]	A2	A	100 - 110	50 - 60	N/A	5	12S	36	Canopy Connection I.V. Pole U.V. Light
30258xxx2 Logic[2] [4]	A2	A	100 - 110	50 - 60	N/A	5	8S	36	Canopy Connection I.V. Pole U.V. Light
30261xxx2 Logic[2] [5]	A2	A	100 - 110	50 - 60	N/A	6	10S	36	Canopy Connection I.V. Pole U.V. Light
30262xxx2 Logic[2] [6]	A2	A	100 - 110	45 - 55	N/A	6	12S	36	Canopy Connection I.V. Pole U.V. Light
30268xxx2 Logic[2] [5]	A2	A	100 - 110	50 - 60	N/A	6	8S	36	Canopy Connection I.V. Pole U.V. Light
30348xxx2 Logic[2] [7]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
30368xxx2 Logic[2] [7]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
30441xxx1 Axiom[2] [9]	C1	A	100 - 110	60 - 70	N/A	4	10S	36	I.V. Pole U.V. Light Bag-In/ Bag-Out
30448xxx1 Axiom[2] [9]	C1	A	100 - 110	60 - 70	N/A	4	8S	36	I.V. Pole U.V. Light Bag-In/ Bag-Out
30461xxx1 Axiom[2] [9]	C1	A	100 - 110	60 - 70	N/A	6	10S	36	I.V. Pole U.V. Light Bag-In/ Bag-Out
30468xxx1 Axiom[2] [8]	C1	A	100 - 110	50 - 60	N/A	6	8S	36	I.V. Pole U.V. Light Bag-In/ Bag-Out
31232xxx2 PuriCare[1] [2]	A2	A	100 - 110	50 - 60	N/A	3	12S	36	I.V. Pole U.V. Light Canopy Connection
31242xxx2 PuriCare[2] [3]	A2	A	100 - 110	50 - 60	N/A	4	12S	36	I.V. Pole U.V. Light Canopy Connection
31252xxx2 PuriCare[2] [4]	A2	A	100 - 110	50 - 60	N/A	5	12S	36	Canopy Connection I.V. Pole U.V. Light
31262xxx2 PuriCare[2] [6]	A2	A	100 - 110	45 - 55	N/A	6	12S	36	Canopy Connection I.V. Pole U.V. Light
30231xxx1 Logic+[10] [11]	A2	A	100 - 110	50 - 60	N/A	3	10S	36	Canopy Connection I.V. Pole U.V. Light
30238xxx1 Logic+[2] [10]	A2	A	100 - 110	50 - 60	N/A	3	8S	36	Canopy Connection I.V. Pole U.V. Light
31231xxx1 PuriCare[10] [11]	A2	A	100 - 110	50 - 60	N/A	3	10S	36	Canopy Connection I.V. Pole U.V. Light
30241xxx1 Logic+[10] [11]	A2	A	100 - 110	50 - 60	N/A	4	10S	36	Canopy Connection I.V. Pole U.V. Light
30242xxx1 Logic+[2] [8]	A2	A	100 - 110	50 - 60	N/A	4	12S	36	Canopy Connection I.V. Pole U.V. Light
30248xxx1 Logic+[2] [10]	A2	A	100 - 110	50 - 60	N/A	4	8S	36	Canopy Connection I.V. Pole U.V. Light
31241xxx1 PuriCare[2] [10]	A2	A	100 - 110	50 - 60	N/A	4	10S	36	Canopy Connection I.V. Pole U.V. Light
31242xxx1 PuriCare[2] [8]	A2	A	100 - 110	50 - 60	N/A	4	12S	36	Canopy Connection I.V. Pole U.V. Light
30251xxx1 Logic+[2] [10]	A2	A	100 - 110	50 - 60	N/A	5	10S	36	Canopy Connection I.V. Pole U.V. Light
30252xxx1 Logic+[2] [12]	A2	A	100 - 110	55 - 65	N/A	5	12S	36	Canopy Connection I.V. Pole U.V. Light
30258xxx1 Logic+[2] [10]	A2	A	100 - 110	50 - 60	N/A	5	8S	36	Canopy Connection I.V. Pole U.V. Light
31251xxx1 PuriCare[2] [10]	A2	A	100 - 110	50 - 60	N/A	5	10S	36	Canopy Connection I.V. Pole U.V. Light
31252xxx1 PuriCare[2] [13]	A2	A	100 - 110	55 - 65	N/A	5	12S	36	Canopy Connection I.V. Pole U.V. Light
30261xxx1 Logic+[2] [10]	A2	A	100 - 110	50 - 60	N/A	6	10S	36	Canopy Connection I.V. Pole U.V. Light
30262xxx1 Logic+[2] [8]	A2	A	100 - 110	50 - 60	N/A	6	12S	36	Canopy Connection I.V. Pole U.V. Light
30268xxx1 Logic+[2] [10]	A2	A	100 - 110	50 - 60	N/A	6	8S	36	Canopy Connection I.V. Pole U.V. Light
31261xxx1 PuriCare[2] [10]	A2	A	100 - 110	50 - 60	N/A	6	10S	36	Canopy Connection I.V. Pole U.V. Light
31262xxx1 PuriCare[2] [8]	A2	A	100 - 110	50 - 60	N/A	6	12S	36	Canopy Connection I.V. Pole U.V. Light
30348xxx1 Logic+[2] [10]	B2	A	100 - 110	50 - 60	852 @ 1.8	4	8S	36	Canopy Connection I.V. Pole U.V. Light
30368xxx1 Logic+[2] [10]	B2	A	100 - 110	50 - 60	1265 @ 2.2	6	8S	36	Canopy Connection I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus 3282000 and Ventus II 3282010. [2] Certified for use with power supplies of 100V/50 Hz, 100V/60 Hz, 230V/50 Hz, and 230V/60 Hz. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus 3282001 and Ventus II 3282011. [4] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus 3282002 and Ventus II 3282012. [5] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus 3282003 and Ventus II 3282013. [6] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 50 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, KD base stand, hydraulic base stand, airflow Sensor, two canopy models Ventus 3282003 and Ventus II 3282013. [7] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, KD base stand, hydraulic base stand, and airflow Sensor. [8] Beginning with serial number 151200002. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord & Cable Portal. [9] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 60 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2018. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord & Cable Portal. [10] Beginning with serial number 190500000. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. This cabinet model is Certified for use with optional sidewall Vacu PassTM Cord & Cable Portal. [11] Certified for use with power supplies of 230V/50 Hz and 230V/60 Hz. [12] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2018. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord & Cable Portal. [13] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2018. This cabinet model is Certified for use with optional sidewall Vacu-PassTM Cord & Cable Portal.

NOTE: Bench stand models 51733xx, 51713xx, 518Z3xx, 51853xx may be used with cabinets in the
30238xxx2/30231xxx2/30232xxx2 Logic series, and 31232xxx2 PuriCare.
Bench stand models 51734xx, 51714xx, 518Z4xx, 51854xx may be used with cabinets in the
30248xxx2/30241xxx2/30242xxx2 Logic series, and 31242xxx2 PuriCare.
Bench stand models 51735xx, 51715xx, 518Z5xx, 51855xx may be used with cabinets in the
30258xxx2/30251xxx2/30252xxx2 Logic series, and 31252xxx2 PuriCare.
Bench stand models 51736xx, 51716xx, 518Z6xx, 51856xx may be used with cabinets in the
30268xxx2/30261xxx2/30262xxx2 Logic series, and 31262xxx2 PuriCare.
Bench stand models 51734xx, 51714xx, 518Z4xx, 51854xx may be used with cabinets in the
30348xxx2 Logic series.
Bench stand models 51736xx, 51716xx, 518Z6xx, 51856xx may be used with cabinets in the
30368xxx2 Logic series.
All bench stand models beginning with 518 may be used with or without the optional wheel
kit (PN# 5190100).
NOTE: Bench stand models 3730300, 3730310, 3401003, 3780200 and 3780100 may be used with
cabinets in the 30231xxx1/30238xxx1 Logic series. Bench stand models 3730400, 3730410,
3401004, 3780201 and 3780101 may be used with cabinets in the 30241xxx1/30248xxx1/30242
Logic series and the corresponding PuriCare series. Bench stand models 3730500, 3730510,
3401005, 3780203, 3780106, 3780107, 3780312, and 3780316 may be used with cabinets in
the 30251xxx1/30258xxx1 Logic series. Bench stand models 3730600, 3630610, 3401006,
3780202 and 3780102 may be used with cabinets in the 30261xxx1/30268xxx1/30262 Logic
series and the corresponding PuriCare series. Bench stand models 3730400 and 34103003
may also be used with the 30348xxx1 Logic Series. Bench stand models 3730600 and
34103006 may also be used with the 30368xxx1 Logic Series. All bench stand models
beginning with 378 may be used with or without the optional wheel kit (PN# 3784000).

MEDFUTURE LLC
3231 Osgood Common
Freemont, CA 94539
United States
626-283-4740
Visit this company's website

Facility : Shandong Province, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

B-IIA2-2F-GL[1] [2]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
B-IIA2-2F-NA[1] [2]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
B-IIA2-4F[3]	A2	A	100 - 110	60 - 70	N/A	4	8S	27	I.V. Pole U.V. Light
B-IIA2-4F-GL[2] [4]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
B-IIA2-4F-NA[2] [4]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
B-IIA2-6F-GL[2] [5]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole U.V. Light Canopy Connection
B-IIA2-6F-NA[2] [5]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole U.V. Light Canopy Connection
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Canopy connection model number is 2A2T-CC. [2] Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2012. Approved for alternate power modes of 115V/60Hz, 220V/50Hz and 220V/60Hz. Canopy connection model number is 4A2E-CC. [4] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Canopy connection model number is 4A2T-CC. [5] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal setpoint of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Canopy connection model number is 6A2T-CC.

Mystaire Inc.
1200 Telecom Drive
Creedmoor, NC 27522
United States
919-229-8511
Visit this company's website

Facility : Shandong Province, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

MY-24A2[1] [2]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
MY-36A2[2] [3]	A2	A	100 - 110	60 - 70	N/A	3	10S	27	U.V. Light Canopy Connection I.V. Pole
MY-48A2[2] [4]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	U.V. Light Canopy Connection I.V. Pole
MY-48B2[2] [5]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	U.V. Light I.V. Pole
MY-72A2[2] [6]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	U.V. Light Canopy Connection I.V. Pole
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Canopy connection model number is 2FT-CC. [2] Certified for use with power supplies of 230V/50Hz and 230V/60Hz. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. Canopy model 3FT-CC was evaluated as a part of the NSF Certification testing procedures. [4] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Canopy model 4FT-CC was evaluated as a part of the NSF Certification testing procedures. [5] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. [6] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Canopy model 6FT-CC was evaluated as a part of the NSF Certification testing procedures.

Nuaire, Inc.
2100 Fernbrook Lane
Plymouth, MN 55447
United States
763-553-1270
Visit this company's website

Facility : Plymouth, MN

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

NU-427-400[1] [2] [3]	B1	A	100 - 110	65 - 75	282 @ 0.7	4	8S	32	Bag-In/ Bag-Out I.V. Pole U.V. Light
NU-427-600[1] [2] [4]	B1	A	100 - 110	65 - 75	474 @ 0.9	6	8S	32	I.V. Pole U.V. Light Bag-In/ Bag-Out
NU-540-300[5]	A2	A	100 - 110	55 - 65	N/A	3	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-300[5]	A2	A	100 - 110	55 - 65	N/A	3	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-400[5]	A2	A	100 - 110	55 - 65	N/A	4	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-400[5]	A2	A	100 - 110	55 - 65	N/A	4	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-500[5]	A2	A	100 - 110	57 - 67	N/A	5	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-500[5]	A2	A	100 - 110	57 - 67	N/A	5	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-600[5]	A2	A	100 - 110	55 - 65	N/A	6	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-540-600[5]	A2	A	100 - 110	55 - 65	N/A	6	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-300[5]	A2	A	100 - 110	55 - 65	N/A	3	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-300[5]	A2	A	100 - 110	55 - 65	N/A	3	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-300[5]	A2	A	100 - 110	55 - 65	N/A	3	12S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-400[5]	A2	A	100 - 110	55 - 65	N/A	4	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-400[5]	A2	A	100 - 110	55 - 65	N/A	4	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-400[5]	A2	A	100 - 110	55 - 65	N/A	4	12S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-500[5]	A2	A	100 - 110	57 - 67	N/A	5	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-500[5]	A2	A	100 - 110	57 - 67	N/A	5	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-500[5]	A2	A	100 - 110	57 - 67	N/A	5	12S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-600[5]	A2	A	100 - 110	55 - 65	N/A	6	8S	35	U.V. Light I.V. Pole Canopy Connection
NU-543-600[5]	A2	A	100 - 110	55 - 65	N/A	6	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-543-600[5]	A2	A	100 - 110	55 - 65	N/A	6	12S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-300[6]	A2	A	100 - 110	55 - 65	N/A	3	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-300[6]	A2	A	100 - 110	55 - 65	N/A	3	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-400[7]	A2	A	100 - 110	55 - 65	N/A	4	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-400[7]	A2	A	100 - 110	55 - 65	N/A	4	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-500[8]	A2	A	100 - 110	55 - 65	N/A	5	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-500[8]	A2	A	100 - 110	55 - 65	N/A	5	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-600[9]	A2	A	100 - 110	55 - 65	N/A	6	8S	35	I.V. Pole U.V. Light Canopy Connection
NU-545-600[9]	A2	A	100 - 110	55 - 65	N/A	6	10S	35	I.V. Pole U.V. Light Canopy Connection
NU-560-400[10]	B2	A	100 - 110	55 - 65	859@1.8	4	8S	36	I.V. Pole U.V. Light
NU-565-400[10]	B2	A	100 - 110	55 - 65	859@1.8	4	8S	36	I.V. Pole U.V. Light
NU-560-600[15]	B2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light
NU-565-600[15]	B2	A	100 - 110	55 - 65	N/A	6	8S	36	I.V. Pole U.V. Light
NU-677-400[11]	A2	A	100 - 110	55 - 65	N/A	4	12S	38	Canopy Connection U.V. Light
NU-677-500[12]	A2	A	100 - 110	55 - 65	N/A	5	12S	38	Canopy Connection U.V. Light
NU-677-600[13]	A2	A	100 - 110	55 - 65	N/A	6	12S	38	Canopy Connection U.V. Light
NU-FH677-500[14]	A2	A	100 - 110	55 - 65	N/A	5	12S	38	U.V. Light
[1] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening for appropriate correction factor, if applicable, without adjusting cabinet airflow balance. [2] Listed model may be suffixed with E. Certified for use with power supplies of 230V/50Hz and 230V/60Hz. [3] Beginning with Series 60 and higher. Downflow nominal set-point of 70 fpm was established 4 inches above the plane of the window with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2011. This cabinet qualifies with the optional DC motor installed. Listed model may be prefaced with Q, N, L or S (i.e. NU-Q427-400). [4] Beginning with series 40 and higher. Downflow nominal set-point of 60 fpm was established 4 inches above the plane of the window with the I.V. Pole and U.V. Light removed. This cabinet qualifies with the optional DC motor installed. Listed model may be prefaced with Q, N, L or S (i.e. NU-Q427-600). This cabinet model was Certified to NSF/ANSI 49-2011. [5] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2012. Listed model may be prefaced with Q, N, L, or S (e.g. NU-Q540-300). Certified for use with power supplies of 100V/50Hz, 100V/60Hz, 230V/50Hz, and 230V/60Hz. [6] Beginning with serial number 170844102115. Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Listed model may be prefaced with Q, N, L, or S (e.g. NU-Q540-300). Certified for use with power supplies of 100V/50Hz, 100V/60Hz, 230V/50Hz, and 230V/60Hz. [7] Beginning with serial number 170847102115. Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Listed model may be prefaced with Q, N, L, or S (e.g. NU-Q540-300). Certified for use with power supplies of 100V/50Hz, 100V/60Hz, 230V/50Hz, and 230V/60Hz. [8] Beginning with serial number 170845102115. Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Listed model may be prefaced with Q, N, L, or S (e.g. NU-Q540-300). Certified for use with power supplies of 100V/50Hz, 100V/60Hz, 230V/50Hz, and 230V/60Hz. [9] Beginning with serial number 170846102115. Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Listed model may be prefaced with Q, N, L, or S (e.g. NU-Q540-300). Certified for use with power supplies of 100V/50Hz, 100V/60Hz, 230V/50Hz, and 230V/60Hz. [10] Beginning with serial number 179773041817. Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz. The concurrent balance value was taken with the NSF exhaust system conforming to ASHRAE. However, differences due to the exhaust system, cabinet and instrumentation may be present and product specification information should be obtained from the manufacturer. [11] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2011. NuAire canopy model NU-911-402 was evaluated as part of the NSF Certification testing procedures. [12] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2011. NuAire canopy model NU-911-502 was evaluated as a part of the NSF Certification testing procedures. [13] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2011. NuAire canopy model NU-911-602 was evaluated as part of the NSF Certification testing procedures. [14] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2012. NuAire canopy model NU-911-502 was evaluated as a part of the NSF Certification testing procedures. NU-FH677-500 is a modified version of NU-677-500, including feed hoppers. [15] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 60 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. Certified for use with power supplies of 115V/60Hz.

Qingdao Haier Biomedical Co., Ltd.
No. 280 Fengyuan Road
High-Tech Zone
Qingdao 266111
China
86 176 6092 6003
Visit this company's website

Facility : Qingdao, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

HR900-IIA2-N[1] [2]	A2	A	100 - 110	64 - 74	N/A	3	8S	27	U.V. Light Casters Hgt Adjustable Stand
HR1200-IIA2-N[1] [3]	A2	A	100 - 110	64 - 74	N/A	4	8S	27	U.V. Light Casters Hgt Adjustable Stand
HR1800-IIA2-N[1] [4]	A2	A	100 - 110	65 - 75	N/A	6	8S	27	U.V. Light Casters Hgt Adjustable Stand
HR1500-IIA2-N[5]	A2	A	100 - 110	64 - 74	N/A	5	8S	27	U.V. Light Casters Hgt Adjustable Stand
[1] This cabinet model was Certified for use with power supplies of 100V/60Hz, 115V/60Hz, 230V/50Hz, 230V/60Hz [2] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 69 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2022. GFCI outlet is approved for this model. [3] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 69 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2019. GFCI outlet is approved for this model. [4] Beginning with serial number BE0GGBEB200QHM7P0001. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 70 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2019. [5] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 64 fpm was established U.V. Light removed. This cabinet is Certified to NSF/ANSI 49-2022.This cabinet model was Certified for use with power supplies of 100V50/60Hz, 115V/60Hz,230V/50/60Hz. GFCI outlet is approved for this model.

Suzhou Antai Airtech Co., Ltd.
No. 2 Weixin Road, SIP
Suzhou, Jiangsu 215122
China
86 512 6552 5002
Visit this company's website

Facility : Suzhou, Jiangsu, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

BSC-1301 II A2[1]	A2	A	100 - 110	64 - 74	N/A	4	10S	24	U.V. Light Canopy Connection
BSC-1302 II A2[1] [2]	A2	A	100 - 110	64 - 74	N/A	4	10S	24	U.V. Light Canopy Connection
[1] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (80 mm high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 69 fpm was established 4 inches above the bottom of the sash with the U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Approved metric value for cabinet width is 1270 mm, window height is 250 mm, and bench height max is 610 mm. [2] Certified for use with power supplies of 230V/50Hz and 230V/60Hz.

Thermo Fisher Scientific
Robert-Bosch-Str. 1
D-63505 Langenselbold
Germany
49 61 813 5277
Visit this company's website

Facility : # 2 Suzhou, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

1574[1] [2]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1579[1] [2]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1584[1] [3]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1589[1] [3]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set-point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set-point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ ANSI 49-2020. Certified for use with power supplies of 230V/50Hz and 230V/60Hz. Removable armrests with padded and non-padded designs in addition to dished and flat work surface designs are approved options for this cabinet model. [2] This model includes stainless steel interior cabinet walls with adjustable height stand. Model can be provided with the standard Type I power cord and internal receptacles (China electrical configuration with YY certification) and identified as 1574, and 1579; with Type GP power cord and internal receptacles (China electrical configuration without YY certification) and identified as 1574-GP, 1579-GP; with Type F power cord and internal receptacles (Korea electrical configuration) and identified as 1574-F, 1579-F; with Type G power cord and internal receptacles (UK electrical configuration) and identified as 1574-G, 1579-G; with Type M power cord and internal receptacles (India electrical configuration) and identified as 1574-M, 1579-M; or with Type C fixed height stand with castors and identified as 1574-C, 1579-C, 1574-FC, 1579-FC, 1574-GC, 1579-GC, 1574-MC, 1579-MC, 1574-C-GP, 1579-C-GP. 1546 and 1548 are the same models as 1574 and 1579 without stands. [3] This model includes coated steel (SmartCoat)interior cabinet walls with adjustable height stand. Model can be provided with the standard Type I power cord and internal receptacles (China electrical configuration with YY certification) and identified as 1584, 1589; with Type F power cord and internal receptacles (Korea electrical configuration)and identified as 1584-F, 1589-F; with Type G power cord and internal receptacles (UK electrical configuration) and identified as 1584-G, 1589-G; with Type M power cord and internal receptacles (India electrical configuration) and identified as 1584-M, 1589-M; or with Type C fixed height stand with castors and identified as 1584-C, 1589-C, 1584-FC, 1589-FC, 1584-GC, 1589-GC, 1584-MC, 1589-MC. 1556 and 1558 are the same models as 1584 and 1589 without stands.

Facility : Marietta, OH

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

1305[1] [2]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1306[1] [2] [3]	A2	A	100 - 110	58 - 58	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1307[1] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1308[1] [3] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1320[5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1321[5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1322[5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1323[5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest U.V. Light I.V. Pole
1325[1] [2]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1326[1] [2] [3]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1327[1] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1328[1] [3] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1330[3] [5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1331[3] [5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1332[3] [5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1333[3] [5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1335[1] [2]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1336[1] [2] [3]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1337[1] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1338[1] [3] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1339[5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1340[5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1341[5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1342[5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1345[2] [8]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1346[2] [8] [9]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1347[4] [8]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1348[4] [8] [9]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1350[5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1351[5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1352[5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1353[5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1354[2] [11]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1355[2] [8]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1356[2] [8] [9]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1357[4] [8]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1358[4] [8] [9]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1359[4] [8]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1366[3] [5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1367[3] [5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1368[5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1369[5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest U.V. Light I.V. Pole
1370[5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1371[5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1372[3] [5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	8S	36	Armrest U.V. Light I.V. Pole
1373[3] [5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1375[2] [8]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1376[2] [8] [9]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1377[4] [8]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1378[4] [8] [9]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1380[3] [5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1381[3] [5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1382[3] [5] [6] [10]	A2	B	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1383[3] [5] [6] [10]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1384[2] [11]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1385[2] [8]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1386[2] [8] [9]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1387[4] [8]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1388[4] [8] [9]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1389[4] [11]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1390[3] [5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1391[3] [5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1392[3] [5] [6] [7]	A2	B	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1393[3] [5] [6] [7]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1395[2] [9] [12]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1396[1] [2] [3]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1397[4] [9] [12]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1398[1] [3] [4]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1505A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1506A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1507A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1508A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1520A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1521A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1522A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1523A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1525A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1526A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1527A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1528A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1530A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1531A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1532A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1533A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	10S	36	Armrest I.V. Pole U.V. Light
1535A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1536A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1537A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1538A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1539A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1540A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1541A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1542A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1544A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1545A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1547A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1549A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1550A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1551A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1552A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1553A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1554A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1555A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1557A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1559A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1566A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1567A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1568A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1569A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1570A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1571A2[15] [17]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1572A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1573A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	8S	36	Armrest I.V. Pole U.V. Light
1575A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1576A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1577A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1578A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1580A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1581A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1582A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1583A2[15] [16]	A2	A	100 - 110	58 - 68	N/A	5	10S	36	Armrest I.V. Pole U.V. Light
1585A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1586A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1587A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1588A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1590A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1591A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1592A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1593A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	3	8S	36	Armrest I.V. Pole U.V. Light
1595A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1596A2[13] [15]	A2	A	100 - 110	58 - 68	N/A	4	8S	36	Armrest I.V. Pole U.V. Light
1597A2[14] [15]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
1598A2[13] [14]	A2	A	100 - 110	58 - 68	N/A	6	8S	36	Armrest I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set-point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set-point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2009. [2] Beginning April 20, 2020 a new fixed height base stand GT221201 and adjustable height base stand GT221189 along with 4ft cross brace GT221195 were approved for use with all 1300 series models manufactured in Marietta OH. Casters GT221199 is an approved option for both stands. [3] Certified for use with power supply of 230V/50Hz and 230V/60Hz. [4] Beginning April 20, 2020 a new fixed height base stand GT221201 and adjustable height base stand GT221189 along with 6ft cross brace GT221196 were approved for use with all 1300 series models manufactured in Marietta OH. Casters GT221199 is an approved option for both stands. [5] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's alternate recomended method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor), without adjusting cabinet airflow balance. Downflow nominal set point was established with I.V.Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2009. [6] May be used with alternate, adjustable height electric stand (maximum bench height of 35 inches). [7] Beginning April 20, 2020 a new fixed height base stand GT221201 and adjustable height base stand GT221189 along with 3ft cross brace GT221193 were approved for use with all 1300 series models manufactured in Marietta OH. Casters GT221199 is an approved option for both stands. [8] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2009. Certified for use with power supply of 230V/50Hz and 230V/60Hz. [9] Certified for use with power supply of 220 V / 50 Hz and 220 V / 60 Hz. [10] Beginning April 20, 2020 a new fixed height base stand GT221201 and adjustable height base stand GT221189 along with 5ft cross brace GT221197 were approved for use with all 1300 series models manufactured in Marietta OH. Casters GT221199 is an approved option for both stands. [11] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set-point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set-point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2009. Certified for use with power supply of 220V/50Hz. [12] Beginning with serial number 188122-1 and 188108-1 for models 1395 and 1397, respectively. Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2009. [13] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified with both dished and flat work surfaces and for additional inlet power supplies of 230V/50Hz and 230V/60Hz. This cabinet model was Certified to NSF/ANSI 49-2022. 15xx models are approved for use without armrests, with padded armrests, or with armrests without padding. [14] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified with both dished and flat work surfaces. This cabinet model was Certified to NSF/ANSI 49-2022. 15xx models are approved for use without armrests, with padded armrests, or with armrests without padding. [15] May be used with manual adjustable height stand (maximum bench height of 35 inches), electrical adjustable height stand (maximum bench height of 36 inches) and caster fixed height stand GT221201. Casters GT221199 is an approved option. [16] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified with both dished and flat work surfaces and for additional inlet power supplies of 230V/50Hz and 230V/60Hz. This cabinet model was Certified to NSF/ANSI 49-2024. 15xx models are approved for use without armrests, with padded armrests, or with armrests without padding. [17] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified with both dished and flat work surfaces. This cabinet model was Certified to NSF/ANSI 49-2024. 15xx models are approved for use without armrests, with padded armrests, or with armrests without padding.

Facility : Guangzhou, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

1574[1] [2]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1584[1] [3]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
1579[1] [2]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
1589[1] [3]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set-point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set-point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Certified for use with power supplies of 230V/50Hz and 230V/60Hz. Removable armrests with padded and non-padded designs in addition to dished and flat work surface designs are approved options for this cabinet model. [2] This model includes stainless steel interior cabinet walls with adjustable height stand. Model can be provided with the standard Type I power cord and internal receptacles (China electrical configuration with YY certification) and identified as 1574, and 1579; with Type GP power cord and internal receptacles (China electrical configuration without YY certification) and identified as 1574-GP, 1579-GP; with Type F power cord and internal receptacles (Korea electrical configuration) and identified as 1574-F, 1579-F; with Type G power cord and internal receptacles (UK electrical configuration) and identified as 1574-G, 1579-G; with Type M power cord and internal receptacles (India electrical configuration) and identified as 1574-M, 1579-M; or with Type C fixed height stand with castors and identified as 1574-C, 1579-C, 1574-FC, 1579-FC, 1574-GC, 1579-GC, 1574-MC, 1579-MC, 1574-C-GP, 1579-C-GP. 1546 and 1548 are the same models as 1574 and 1579 without stands. [3] This model includes coated steel (SmartCoat)interior cabinet walls with adjustable height stand. Model can be provided with the standard Type I power cord and internal receptacles (China electrical configuration with YY certification) and identified as 1584, 1589; with Type F power cord and internal receptacles (Korea electrical configuration)and identified as 1584-F, 1589-F; with Type G power cord and internal receptacles (UK electrical configuration) and identified as 1584-G, 1589-G; with Type M power cord and internal receptacles (India electrical configuration) and identified as 1584-M, 1589-M; or with Type C fixed height stand with castors and identified as 1584-C, 1589-C, 1584-FC, 1589-FC, 1584-GC, 1589-GC, 1584-MC, 1589-MC. 1556 and 1558 are the same models as 1584 and 1589 without stands.

Facility : Langenselbold, Germany

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

HERAsafe 2030i 1.2[1]	A2	A	100 - 110	58 - 68	N/A	4	10S	36	Armrest I.V. Pole U.V. Light
HERAsafe 2030i 1.8[1]	A2	A	100 - 110	58 - 68	N/A	6	10S	36	Armrest I.V. Pole U.V. Light
[1] Beginning with serial number 42294669 for the HERAsafe 2030i 1.2 and serial number 42209172 for the HERAsafe 2030i 1.8. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 63 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified with both dished and flat work surfaces and for additional inlet power supplies of 230V/50Hz and 230V/60Hz. This cabinet model was Certified to NSF/ANSI 49-2018. HERAsafe 2030i 1.2 is approved for use with either padded armrests or armrests without padding. HERAsafe 2030i 1.8 is approved for use without armrests, with padded armrests, or with armrests without padding.

[2] Beginning with serial number 40329642.  Inflow nominal set-point of 105 fpm was
    established with a direct airflow reading instrument.  This nominal set-point was
    confirmed using the manufacturer's recommended alternate method with thermal anemometer
    in a constricted (3 inch high) access opening (consult manufacturer's operator's manual
    for appropriate correction factor) without adjusting cabinet airflow balance. This
    cabinet model was Certified with a 3 section work surface. This cabinet model was
    Certified to NSF/ANSI 49-2009.

Thermo Fisher Scientific
401 Millcreek Road
Marietta, OH 45750
United States
740-373-4763

Facility : # 1 USA

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

1501B2[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1502B2[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1503B2[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1504B2[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1513B2[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1514B2[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1513B2F[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1513B2G[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1513B2M [1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1514B2F[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1514B2G[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1514B2M[1] [2]	B2	A	100 - 110	50 - 60	818 @ 1.8	4	8S	36	I.V. Pole U.V. Light
1512B2[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1519B2[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1534B2[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1543B2[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1524B2[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1529B2[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1524B2F[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1524B2G[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1524B2M[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1529B2F[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1529B2G[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
1529B2M[1] [2]	B2	A	100 - 110	50 - 60	1382 @ 2.5	6	8S	36	I.V. Pole U.V. Light
151x[2] [3] [4]	B2	A	100 - 110	50 - 60	852 @ 1.8	4	8S	36	Bag-In/ Bag-Out I.V. Pole U.V. Light
156x[2] [3] [5]	B2	A	100 - 110	50 - 60	1265 @ 2.2	6	8S	36	Bag-In/ Bag-Out I.V. Pole U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2022. This cabinet model is Certified for use with optional pre-filter, cable pass-Thru, service fixtures, welded stand 3730402 (4ft) and 3730602 (6ft), and airflow Sensor. [2] Certified for use with power supplies of 100V/50 Hz, 100V/60 Hz, 230V/50 Hz, and 230V/60 Hz. [3] Beginning with serial number 190500000. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted access opening, using the manufacturer-supplied probe holder and sash stop (consult manufacturer for appropriate correction factor, if applicable), without adjusting cabinet airflow balance. Downflow nominal set point of 55 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. This cabinet model is Certified for use with optional cord & cable portal. [4] Model 1511 is equivalent to Model 1510, but comes equipped with U.V. lighting (Listed as an acceptable option). Model 1515 is equivalent to model 1510, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Chinese-compatible plug. Model 1516 is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with U.V. lighting and a Chinese-compatible plug. Model 1517 is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a North American 230 Volt-compatible plug. Model 1517F is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type F electrical plug (Schuko). Model 1517G is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type G electrical plug (UK-compatible). Model 1517M is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type M electrical plug (India-compatible). Model 1518 is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with U.V. lighting and a North American 230 Volt-compatible plug.Model 1518F is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type F electrical plug (Schuko). Model 1518G is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type G electrical plug (UK-compatible). Model 1518M is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type M electrical plug (India-compatible). [5] Model 1561 is equivalent to Model 1560, but comes equipped with U.V. lighting (Listed as an acceptable option). Model 1562 is equivalent to model 1560, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Chinese-compatible plug. Model 1563 is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with U.V. lighting and a Chinese-compatible plug. Model 1564 is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a North American 230 Volt-compatible plug. Model 1564F is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type F electrical plug (Schuko). Model 1564G is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type G electrical plug (UK-compatible). Model 1564M is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type M electrical plug (India-compatible). Model 1565 is equivalent, but is rated for use with power supplies of 230 V and 50/60 Hz and is equipped with U.V. lighting and a North American 230 Volt-compatible plug. Model 1565F is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type F electrical plug (Schuko). Model 1565G is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type G electrical plug (UK-compatible). Model 1565M is equivalent, but is rated for use with power supplies of 230V and 50/60 Hz and is equipped with a Type M electrical plug (India-compatible).

Thermolab Scientific Equipments Private Limited
Thermolab House
Plot No:19/20/40/41,Vasai Municipal Indu
Umela Road Vasai, (West) District
Palghar, MM 401207
India
91 744 7448880

Facility : Shandong, China

Model Number	Cabinet Type/Style		Inflow Velocity (fpm)	Downflow Velocity (fpm)	CBV (cfm) at Static Pressure (in w.g.)	Cabinet Width ft.	Window Ht/Type in.	Bench Ht Max in.	Acceptable Options

Hyzone2002IIA2-NSA[1] [6]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
Hyzone2002IIA2-NSG[1] [6]	A2	A	100 - 110	60 - 70	N/A	2	10S	28	U.V. Light Canopy Connection
Hyzone2003IIA2-NSA[2] [6]	A2	A	100 - 110	60 - 70	N/A	3	10S	27	Canopy Connection I.V. Pole U.V. Light
Hyzone2003IIA2-NSG[2] [6]	A2	A	100 - 110	60 - 70	N/A	3	10S	27	Canopy Connection I.V. Pole U.V. Light
Hyzone2004IIA2-NSA[3] [6]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
Hyzone2004IIA2-NSG[3] [6]	A2	A	100 - 110	60 - 70	N/A	4	10S	27	I.V. Pole U.V. Light Canopy Connection
Hyzone2004IIB2-NSA[4] [6]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	I.V. Pole U.V. Light
Hyzone2004IIB2-NSG[4] [6]	B2	A	100 - 110	60 - 70	949 @ 2.1	4	8S	27	I.V. Pole U.V. Light
Hyzone2006IIA2-NSA[5] [6]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole Canopy Connection U.V. Light
Hyzone2006IIA2-NSG[5] [6]	A2	A	100 - 110	60 - 70	N/A	6	10S	27	I.V. Pole Canopy Connection U.V. Light
[1] Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2020. Certified canopy connection model number is 2FT-CC. [2] Beginning with serial number NA3FAT220600001AY. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. Certified canopy connection model number is 3FT-CC. [3] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified canopy connection model number is 4FT-CC. [4] Beginning with serial number 4FB18050001. Inflow nominal set point of 105 fpm was established with a direct airflow reading instrument. This nominal set point was confirmed using the manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening (consult manufacturer's operator's manual for appropriate correction factor) without adjusting cabinet airflow balance. Downflow nominal set point of 65 fpm was established with I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2016. [5] Inflow nominal set-point of 105 fpm was established with a direct airflow reading instrument. A corresponding inflow nominal set-point of 105 fpm (corrected to local air density) was confirmed using manufacturer's recommended alternate method with thermal anemometer in a constricted (3 inch high) access opening and applying appropriate correction factor without adjusting cabinet airflow balance. The downflow nominal set-point of 65 fpm was established 4 inches above the bottom of the sash with the I.V. Pole and U.V. Light removed. This cabinet model was Certified to NSF/ANSI 49-2014. Certified canopy connection model number is 6FT-CC. [6] Certified for use with power supplies of 115V/60Hz, 230V/50Hz and 230V/60Hz.

Number of matching Manufacturers is 22
Number of matching Products is 494
Processing time was 0 seconds

NSF Product and Service Listings

Connect with NSF