NSF Product and Service Listings

These NSF Official Listings are current as of Monday, September 23, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=CSA&Company=03400&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.


CSA Standard B483.1
Drinking Water Treatment Systems



 
3M Purification Inc. 
400 Research Parkway
Meriden, CT 06450 
United States 
800-222-7880 
651 737 1374
Visit this company's website

Facility : Stafford Springs, CT

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In
SGLP100-CL CFS M
HF65-CL
15,000(1) 1   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class V
Taste and Odor Reduction
SGLP200-CL CFS M
HF65-CL
15,000(1) 1   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class V
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.


Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In to Separate Tap
AP-DWS1000 AP-DW80
AP-DW90
625 .6   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

Commercial Modular
High Flow Series[2] [3] C1-250 10,000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
3MFF100[6] [7] 3MFF100 6000(1) 2.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] C1-251 10,000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Aramark Bronze[6] Bronze 3000(1) 1   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Aramark Gold[6] Gold 1000(1) .75   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] C1-350 12,600(1) 1.7   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
High Flow Series[2] [3] C1-450 25,000 2.1   Chlorine Reduction
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Aramark Platinum[6] Platinum 1000(1) .75   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series HF95-CL 30,000 1.5   Chloramine Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Aramark Silver[6] Silver 1500(1) 1   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] C1-650 35,000(1) 3.34   Chlorine Reduction
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
AP-DWS1000 - LF AP-DW80
AP-DW90
625 .6   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] C1-652 7000(1) 2.1   Chlorine Reduction
Nominal Particulate Reduction, Class V
High Flow Series[2] [3] C1-950 54,000(1) 5   Chlorine Reduction
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
ATIFF6000 ATIFF6001 6000(1) 2.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Body Glove BG-3000 BG-3000C 450(1) .75   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] C1-952 30,000(1) 2.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
High Flow Series[2] [3] HF10-MS 3500(1) 1   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Bunn EQHP-10L EQHP-10L 10000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF15-MS 3500 1   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Bunn EQHP-25L EQHP-25L 25000(1) 2.1   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Bunn EQHP-54L EQHP-54L 54,000(1) 5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF20 9000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
High Flow Series[2] [3] HF20-MS 9000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW-Complete (Ice) SW-SR-60 (1) 3.34   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF20-S 9000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW-Complete (Beverage) SW-CRF-60 (1) 4.4   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF25 10,000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW4-PLUS SW-CRF-60 (1) 4.4   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF25-MS 10,000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW4-PLUS SW-SR-60 (1) 3.34   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF25-S 10,000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW260-Plus SW-CRF (1) 4.4   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF30 14,000(1) 1.67   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW260-Plus SW-SR (1) 3.34   Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF30-MS 14,000(1) 1.67   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
VH3/HC251-HS HC251-HS 2500(1) 1   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[6] Available with the VH3 series heads (as molded, with plug or with gauge).
[7] System uses 2 HF60-CL cartridges						.

Commercial Modular
High Flow Series[2] [3] HF30-S 14,000(1) 1.67   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
High Flow Series[2] [3] HF35 12,600(1) 1.67   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF35-CL 3600 1.67   Chlorine Reduction
Chloramine Reduction
Taste and Odor Reduction
High Flow Series[2] [3] HF35-MS 12,600(1) 1.67   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
High Flow Series[2] [3] HF35-S 12,600(1) 1.67   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF40 25,000(1) 2.5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF40-S 25,000(1) 2.5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF45 25,000 2.1   Chlorine Reduction
Taste and Odor Reduction
High Flow Series[2] [3] HF45-S 25,000 2.1   Chlorine Reduction
Taste and Odor Reduction
High Flow Series[2] [3] HF60 35,000(1) 3.34   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF60-CL (1) 2.2   Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF60-CLS (1) 2.2   Nominal Particulate Reduction, Class I
High Flow Series HF60-CLX 4700 1.67   Chloramine Reduction
High Flow Series HF60-CLX 50,000 3.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF60-S 35,000(1) 3.34   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF60-S-SR5 (1) 3.34   Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF65 35,000 3.34   Chlorine Reduction
Taste and Odor Reduction
High Flow Series[2] [3] [4] HF65-CL 7000(1) 2.1   Chlorine Reduction
Chloramine Reduction
Nominal Particulate Reduction, Class V
Taste and Odor Reduction
High Flow Series[2] [3] [4] HF65-CL 8000(1) 1.7   Chloramine Reduction
Chlorine Reduction
Nominal Particulate Reduction, Class V
Taste and Odor Reduction
High Flow Series[2] [3] [4] HF65-CL 15,000(1) 1   Chlorine Reduction
Chloramine Reduction
Nominal Particulate Reduction, Class V
Taste and Odor Reduction
High Flow Series[2] [3] HF65-S 35,000 3.34   Chlorine Reduction
Taste and Odor Reduction
High Flow Series[2] [3] HF90 54,000(1) 5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF90-CL 12,500(1) 1.33   Chloramine Reduction
Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF90-M 75,000 5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF90-S 54,000(1) 5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF90-S-SR (1) 5   Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF90-S-SR5 (1) 5   Nominal Particulate Reduction, Class I
High Flow Series[2] [3] HF95 54,000 5   Chlorine Reduction
Taste and Odor Reduction
High Flow Series[2] [3] HF95-CL 30,000(1) 2.5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class V
High Flow Series[2] [3] HF95-S 54,000 5   Chlorine Reduction
Taste and Odor Reduction
Zip Series[5] ZGP25S
92321NZ
10,000(1) 1.5   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Zip Series[5] ZPG40S
90992NZ
25,000(1) 2.1   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Zip Series[5] ZPG45S
92319NZ
25,000 2.1   Chlorine Reduction
Taste and Odor Reduction
Zip Series[5] ZPG60S
90993NZ
35,000(1) 3.34   Chlorine Reduction
Nominal Particulate Reduction, Class I
Taste and Odor Reduction
Zip Series[5] ZPG65S
92323NZ
35,000 3.34   Chlorine Reduction
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available options: 
    (1) 2.1
    (2) 1.7
    (3) 1.0
[5] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).


Facility : Guangzhou, China

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In
AP Easy Cyst-FF C-Cyst-FF 2000(1) 1.5   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.


Facility : Nuevo Leon, Mexico

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
HF05-MS[2] [3] HF05-MS 1500 .75   Chlorine Reduction
Taste and Odor Reduction
HF27[2] [3] HF27 4800 1.5   Chlorine Reduction
Taste and Odor Reduction
HF27-S[2] [3] HF27-S 4800 1.5   Chlorine Reduction
Taste and Odor Reduction

   
[2] Available with the HN3, NH3, or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.

Plumbed-In
3US-AS01 3US-AF01 2000 2.25   Chlorine Reduction
Taste and Odor Reduction
3US-AS01H 3US-AF01H 2000 2.25   Chlorine Reduction
Taste and Odor Reduction
4290510 4204490 750(1) .78   Chlorine Reduction
Taste and Odor Reduction
Nominal Particulate Reduction, Class I
Aramark Basic Aramark Basic 1500(1) 0.5   Chlorine Reduction
Taste and Odor Reduction
Aramark Bronze HS Bronze HS 2500 1   Chlorine Reduction
Taste and Odor Reduction
VH3/HC151-S HC151-S 1500 0.75   Chlorine Reduction
Taste and Odor Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.

Refrigerator Filters, Integrated
839043 81099 120 0.5   Chloramine Reduction
Nonylphenol Reduction
Taste and Odor Reduction

COMPONENTS: Filter Housings
AP802  
CFS22  


Facility : Wroclaw, Poland

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Commercial Modular
Rancilio[1] RG-WTR-C 950 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] B145-CLS 530 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] B165-CLS 749 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] B195-CLS 1249 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] B145H-CLS 742 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] B165H-CLS 1049 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] B195H-CLS 1748 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] ES145-CLS 530 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Blend Series of Products[2] ES165-CLS 749 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Pro Series of Products[2] P145BN-CL 423 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Pro Series of Products[2] P165BN-CL 599 .5   Chlorine Reduction
Taste and Odor Reduction
ScaleGard Pro Series of Products[2] P195BN-CL 998 .5   Chlorine Reduction
Taste and Odor Reduction

   
[1] Available with the RG-WTR-H Series Head
[2] Available with the BH3, BH3-BSP, BH3-NB, BH3-NB-BSP, BH3-NB-NPT and BH3-NPT Series Head.


Facility : Stafford Springs, CT

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In [2]
ScaleGard HP-PF HF90-CL-RO (1) 1.33   Cyst Reduction
Turbidity Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Model is a reverse osmosis system and is also Certified to NSF/ANSI Standard 58.


Facility : New Ulm, MN

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In to Separate Tap
N/A AP-DW80
AP-DW90
625 .6   Cyst Reduction
Lead Reduction
MTBE Reduction
Turbidity Reduction
VOC Reduction **

Plumbed-In
3MFF100[4] [5] 3MFF100 6000(1) 2.5   Benzene Reduction
Cyst Reduction
Lead Reduction
P-Dichlorobenzene Reduction
Toxaphene Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF10-MS[2] [3] HF10-MS (1) 1   Asbestos Reduction
Cyst Reduction
HF20[2] [3] HF20 (1) 1.5   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Aramark Gold[4] Gold 1000(1) .75   Asbestos Reduction
Lead Reduction
Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF20-MS[2] [3] HF20-MS (1) 1.5   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Aramark Platinum[4] Platinum 1000(1) .75   Asbestos Reduction
Lead Reduction
Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF20-S[2] [3] HF20-S (1) 1.5   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
Aramark Silver[4] Silver 1500(1) 1   Asbestos Reduction
Cyst Reduction
AP-DWS1000 - LF AP-DW80
AP-DW80
625 .6   Cyst Reduction
Lead Reduction
MTBE Reduction
Turbidity Reduction
VOC Reduction **

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF30[2] [3] HF30 (1) 1.67   Cyst Reduction
HF30-MS[2] [3] HF30-MS (1) 1.67   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
ATIFF6000 ATIFF6001 6000(1) 2.5   Benzene Reduction
Cyst Reduction
Lead Reduction
P-Dichlorobenzene Reduction
Toxaphene Reduction
Body Glove BG-3000 BG-3000C 450(1) .75   Asbestos Reduction
Cyst Reduction
Lead Reduction
Trihalomethanes (TTHM) Reduction
VOC Reduction **

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF30-S[2] [3] HF30-S (1) 1.67   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW-Complete (Ice) SW-SR-60 (1) 3.34   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF40[2] [3] HF40 (1) 2.5   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW-Complete (Beverage) SW-CRF-60 (1) 4.4   Cyst Reduction
SW4-PLUS SW-CRF-60 (1) 4.4   Cyst Reduction
VOC Reduction **

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF40-S[2] [3] HF40-S (1) 2.5   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW4-PLUS SW-SR-60 (1) 3.34   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF60[2] [3] HF60 (1) 3.34   Cyst Reduction
HF60-CL[2] [3] HF60-CL (1) 2.2   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW260-Plus SW-CRF (1) 4.4   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF60-CLS[2] [3] HF60-CLS (1) 2.2   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).

Plumbed-In
SW260-Plus SW-SR (1) 3.34   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).
[5] System uses 2 HF60-CL cartridges.

Commercial Modular
HF60-CLX HF60-CLX 4700 1.67   Cyst Reduction
HF60-CLX HF60-CLX 50,000 3.5   Cyst Reduction
HF60-S[2] [3] HF60-S (1) 3.34   Cyst Reduction
HF60-S-SR5[2] [3] HF60-S-SR5 (1) 3.34   Cyst Reduction
HF90[2] [3] HF90 (1) 5   Cyst Reduction
Turbidity Reduction
HF90-CL[2] [3] HF90-CL (1) 1.33   Cyst Reduction
Turbidity Reduction
HF90-S[2] [3] HF90-S (1) 5   Cyst Reduction
Turbidity Reduction
HF90-S-SR[2] [3] HF90-S-SR (1) 5   Cyst Reduction
HF90-S-SR5[2] [3] HF90-S-SR5 (1) 5   Cyst Reduction
ZPG40S[4] ZPG40S
90992NZ
25,000(1) 2.1   Cyst Reduction
ZPG60S[4] ZPG60S
92323NZ
35,000(1) 3.34   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.
[2] Available with the NH3 or VH3 series heads (as molded, with plug or with gauge).
    (1) Indicates approved for use with the High Flow Series Triple Manifold.
    (2) Indicates approved for use with the High Flow Series DF1XX Manifold.
    (3) Indicates approved for use with the High Flow Series Twin Manifold.
    (4) Indicates approved for use with the High Flow Series DF2XX Manifold.
    (5) Indicates approved for use with the High Flow Series DP1XX Manifold.
    (6) Indicates approved for use with the High Flow Series DP2XX Manifold.
    (7) Indicates approved for use with the High Flow Series DP3XX Manifold.
    (8) Indicates approved for use with the High Flow Series SF1XX Manifold.
    (9) Indicates approved for use with the High Flow Series DIDF2XX Manifold.
    (10) Indicates approved for use with the High Flow Series DIDF1XX Manifold.
[3] SH-EXP can be used with any of the following: High Flow Series Manifolds, the High Flow
    Series Triple, DF1XX, Twin, DF2XX, DP1XX, DP2XX, DP3XX, or SF1XX Manifold.
[4] Available with the VH3 series heads (as molded, with plug or with gauge).


** The category of VOC (Volatile Organic Chemical) includes a number of chemicals that are both man-made and naturally occurring. Water from wells and utilities may contain some of these contaminants. Some VOCs are pesticides, herbicides, or insecticides that seep into the ground water after application. Other VOCs enter the water supply through industrial or other waste disposal. This category also includes total trihalomethanes, which are a by-product of chlorination.

A VOC reduction claim by the manufacturer means the system reduces the concentration of all of the following contaminants:

alachlor                      endrin                          simazine  
atrazine                      ethylbenzene                    styrene
benzene                       ethylene dibromide (EDB)        1,1,2,2-tetrachloroethane
carbofuran                    haloacetonitriles               tetrachloroethylene
carbon tetrachloride            bromochloroacetonitrile       toluene
chlorobenzene                   dibromoacetonitrile           2,4,5-TP(silvex)
chloropicrin                    dichloroacetonitrile          tribromoacetic acid
2,4-D                           trichloroacetonitrile         1,2,4-trichlorobenzene
dibromochloropropane (DBCP)   haloketones                     1,1,1-trichloroethane
o-dichlorobenzene               1,1-dichloro-2-propanone      1,1,2-trichloroethane
p-dichlorobenzene               1,1,1-trichloro-2-propanone   trichloroethylene 
1,2-dichloroethane            heptachlor                      trihalomethanes (TTHM)       
1,1-dichloroethylene          heptachlor epoxide                bromodichloromethane
cis-1,2-dichloroethylene      hexachlorobutadiene               bromoform
trans-1,2-dichloroethylene    hexachlorocyclopentadiene         chlorodibromomethane
1,2-dichloropropane           lindane                           chloroform
cis-1,3-dichloropropylene     methoxychlor                    xylenes                       
dinoseb                       pentachlorophenol                

Facility : Guangzhou, China

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Plumbed-In
AP Easy Cyst-FF C-Cyst-FF (1) 1.5   Cyst Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.


** The category of VOC (Volatile Organic Chemical) includes a number of chemicals that are both man-made and naturally occurring. Water from wells and utilities may contain some of these contaminants. Some VOCs are pesticides, herbicides, or insecticides that seep into the ground water after application. Other VOCs enter the water supply through industrial or other waste disposal. This category also includes total trihalomethanes, which are a by-product of chlorination.

A VOC reduction claim by the manufacturer means the system reduces the concentration of all of the following contaminants:

alachlor                      endrin                          simazine  
atrazine                      ethylbenzene                    styrene
benzene                       ethylene dibromide (EDB)        1,1,2,2-tetrachloroethane
carbofuran                    haloacetonitriles               tetrachloroethylene
carbon tetrachloride            bromochloroacetonitrile       toluene
chlorobenzene                   dibromoacetonitrile           2,4,5-TP(silvex)
chloropicrin                    dichloroacetonitrile          tribromoacetic acid
2,4-D                           trichloroacetonitrile         1,2,4-trichlorobenzene
dibromochloropropane (DBCP)   haloketones                     1,1,1-trichloroethane
o-dichlorobenzene               1,1-dichloro-2-propanone      1,1,2-trichloroethane
p-dichlorobenzene               1,1,1-trichloro-2-propanone   trichloroethylene 
1,2-dichloroethane            heptachlor                      trihalomethanes (TTHM)       
1,1-dichloroethylene          heptachlor epoxide                bromodichloromethane
cis-1,2-dichloroethylene      hexachlorobutadiene               bromoform
trans-1,2-dichloroethylene    hexachlorocyclopentadiene         chlorodibromomethane
1,2-dichloropropane           lindane                           chloroform
cis-1,3-dichloropropylene     methoxychlor                    xylenes                       
dinoseb                       pentachlorophenol                

Facility : Nuevo Leon, Mexico

  Replacement Service Cycle Flow Rate  
Brand Name / Trade Name / Model Element (gallons) (gpm)   Claim

Refrigerator Filters, Integrated
4290510 4204490 750(1) .78   Asbestos Reduction
Atrazine Reduction
Benzene Reduction
Carbofuran Reduction
Cyst Reduction
Lead Reduction
Lindane Reduction
Mercury Reduction
P-Dichlorobenzene Reduction
Toxaphene Reduction

   
(1) Claims of capacity or rated service cycle are not applicable for mechanical filtration.


** The category of VOC (Volatile Organic Chemical) includes a number of chemicals that are both man-made and naturally occurring. Water from wells and utilities may contain some of these contaminants. Some VOCs are pesticides, herbicides, or insecticides that seep into the ground water after application. Other VOCs enter the water supply through industrial or other waste disposal. This category also includes total trihalomethanes, which are a by-product of chlorination.

A VOC reduction claim by the manufacturer means the system reduces the concentration of all of the following contaminants:

alachlor                      endrin                          simazine  
atrazine                      ethylbenzene                    styrene
benzene                       ethylene dibromide (EDB)        1,1,2,2-tetrachloroethane
carbofuran                    haloacetonitriles               tetrachloroethylene
carbon tetrachloride            bromochloroacetonitrile       toluene
chlorobenzene                   dibromoacetonitrile           2,4,5-TP(silvex)
chloropicrin                    dichloroacetonitrile          tribromoacetic acid
2,4-D                           trichloroacetonitrile         1,2,4-trichlorobenzene
dibromochloropropane (DBCP)   haloketones                     1,1,1-trichloroethane
o-dichlorobenzene               1,1-dichloro-2-propanone      1,1,2-trichloroethane
p-dichlorobenzene               1,1,1-trichloro-2-propanone   trichloroethylene 
1,2-dichloroethane            heptachlor                      trihalomethanes (TTHM)       
1,1-dichloroethylene          heptachlor epoxide                bromodichloromethane
cis-1,2-dichloroethylene      hexachlorobutadiene               bromoform
trans-1,2-dichloroethylene    hexachlorocyclopentadiene         chlorodibromomethane
1,2-dichloropropane           lindane                           chloroform
cis-1,3-dichloropropylene     methoxychlor                    xylenes                       
dinoseb                       pentachlorophenol                

Facility : Stafford Springs, CT

  Replacement   Daily Production  
Brand Name / Trade Name / Model Module   Rate (gpd)   Claim

Plumbed-In
SGLP100 -CL HF65-CL
CFS M
  30.99   TDS Reduction
SGLP200-CL HF65-CL
CFS M
  61.97   TDS Reduction
ScaleGard HP-PF HF90-CL-RO
HFRO-500-PF
  409   TDS Reduction

Replacement Element: Plumbed-In to Separate Tap
FSTM075 ScaleGard Pre
ScaleGard RO
  25.87   TDS Reduction


** The category of VOC (Volatile Organic Chemical) includes a number of chemicals that are both man-made and naturally occurring. Water from wells and utilities may contain some of these contaminants. Some VOCs are pesticides, herbicides, or insecticides that seep into the ground water after application. Other VOCs enter the water supply through industrial or other waste disposal. This category also includes total trihalomethanes, which are a by-product of chlorination.

A VOC reduction claim by the manufacturer means the system reduces the concentration of all of the following contaminants:

alachlor                      endrin                          simazine  
atrazine                      ethylbenzene                    styrene
benzene                       ethylene dibromide (EDB)        1,1,2,2-tetrachloroethane
carbofuran                    haloacetonitriles               tetrachloroethylene
carbon tetrachloride            bromochloroacetonitrile       toluene
chlorobenzene                   dibromoacetonitrile           2,4,5-TP(silvex)
chloropicrin                    dichloroacetonitrile          tribromoacetic acid
2,4-D                           trichloroacetonitrile         1,2,4-trichlorobenzene
dibromochloropropane (DBCP)   haloketones                     1,1,1-trichloroethane
o-dichlorobenzene               1,1-dichloro-2-propanone      1,1,2-trichloroethane
p-dichlorobenzene               1,1,1-trichloro-2-propanone   trichloroethylene 
1,2-dichloroethane            heptachlor                      trihalomethanes (TTHM)       
1,1-dichloroethylene          heptachlor epoxide                bromodichloromethane
cis-1,2-dichloroethylene      hexachlorobutadiene               bromoform
trans-1,2-dichloroethylene    hexachlorocyclopentadiene         chlorodibromomethane
1,2-dichloropropane           lindane                           chloroform
cis-1,3-dichloropropylene     methoxychlor                    xylenes                       
dinoseb                       pentachlorophenol                

Number of matching Manufacturers is 1
Number of matching Products is 144
Processing time was 0 seconds