NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, September 23, 2020 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=26000&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.


NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects


 
Kemflo / Filbur 
No. 3 Huan East Street, Da-Zhou
Pingtung 900 
Taiwan 
886 8 7524736

Facility : # 1 China

 
           

COMPONENTS: Filter Cartridges[1]
CP-25-11-10  
KP110-01-BQ  
KP110-10-BQ  
KP110-20-BQ  
KP110-5450-1Q  
KP120-01-BQ  
KP120-05-BQ  
PP-OO-II-LL-MM[2]  
PS-25-11-10-01-CPC  
PS-25-11-10-05-CPC  
PS-25-11-10-25-CPC  
PS-25-11-20-05-CPC  
PS-25-11-20-25-CPC  
PS-OO-II-LL-MM-G[2]  
PS-OO-II-LL-MM-G-JT[2]  
PS01-5401-3Q  
PS01-5451-3  
PS01-5452-3  
PS01-5461-3  
PS01-5465-3  
PS01-BB10-KF  
PS01-BB20-KF  
PS05-5401-1Q  
PS05-5451-1  
PS05-5451-1L  
PS05-5452-1  
PS05-5461-1  
PS05-5465-1  
PS05-BB10-KF  
PS10-5455-1  
PS10-5462-1  
PS20-5453-1  
PS20-5456-1  
PS20-5459-1  
PS20-5463-1  
PS20-5466-1  
PS20-BB10-KF  
PS20-BB20-KF  
PS25-5457-1  
PS50-5454-1  
PS50-5458-1  
PS50-5460-1  
PS50-5464-1  
PS50-5467-1  
PS50-BB10-KF  
PS50-BB20-KF  
PresiCarre CFR-PS0510  

   
[1] Conforms to the material requirements only.
[2] OO - Outer diameter - ranges from 2.0" to 4.5", where 20 is 2.0", 25 is 2.5", and 45 
         is 4.5"
    II - Inner diameter, where 11 is 1.125" (28 mm)
    LL - Length - ranges from 5" to 40", where 05 is 5", 10 is 10", 20 is 20", 30 is
         30", and 40 is 40"
    MM - Micron rating - ranges from 0.5 to 100 micron, where 00 is 0.5 micron, 01 is 1 
         micron, 05 is 5 micron, 10 is 10 micron, 20 is 20 micron, 30 is 30 micron, 50 is
         50 micron, 80 is 80 micron, and 11 is 100 micron
    G  - Grooved
    JT - Jalt Technologies


Facility : # 2 Pingtung, Taiwan

 
           

COMPONENTS: Carbon Block[1]
KFRF-1135-0200-01  
KFRF-1138-0200-01  
KFRF-1138-0200-02  
KFRF-1138-0240-02  
KFRF-3160-0200-01  

   
[1] Conforms to material requirements only.

COMPONENTS: Disposable In-Line Filters[2]
AICRO  
Easywell AIC-10  

   
[2] Conforms to the material and structural integrity requirements only.

COMPONENTS: Filter Cartridges[1]
206-CB10-10-KF-N  
CP-25-11-10  
KF-CTOC-45-10-T  
PS-25-11-10-01-CPC  
PS-25-11-10-05-CPC  
PS-25-11-10-25-CPC  
PS-25-11-20-05-CPC  
PS-25-11-20-25-CPC  
PS-OO-II-LL-MM-G[3]  
PS-OO-II-LL-MM-G-JT[3]  
PS01-5401-3Q  
PS01-5451-3  
PS01-5452-3  
PS01-5461-3  
PS01-5465-3  
PS01-BB10-KF  
PS01-BB20-KF  
PS05-5401-1Q  
PS05-5451-1  
PS05-5451-1L  
PS05-5452-1  
PS05-5461-1  
PS05-5465-1  
PS05-BB10-KF  
PS10-5455-1  
PS10-5462-1  
PS20-5453-1  
PS20-5456-1  
PS20-5459-1  
PS20-5463-1  
PS20-5466-1  
PS20-BB10-KF  
PS20-BB20-KF  
PS25-5457-1  
PS50-5454-1  
PS50-5458-1  
PS50-5460-1  
PS50-5464-1  
PS50-5467-1  
PS50-BB10-KF  
PS50-BB20-KF  

   
[1] Conforms to material requirements only.
[3] OO - Outer diameter ranges from 2.0" to 4.5", where 20 is 2.0", 25 is 2.5", and 45 
         is 4.5".
    II - Inner diameter, where 11 is 1.125 (28 mm)
    LL - Length ranges from 5" to 40", where 05 is 5", 10 is 10", 20 is 20", 30 is 30", 
         and 40 is 40".
    MM - Micron rating ranges from 0.5 to 100 micron, where 00 is 0.5 micron, 01 is 1 
         micron, 05 is 5 micron, 10 is 10 micron, 30 is 30 micron, 50 is 50 micron, 80 
         is 80 micron, and 11 is 100 micron.
    G  - Grooved
    JT - Jalt Technologies

COMPONENTS: Filter Cartridges, Point-of-Entry[1] [POE]
PS25-10-KFTC  

   
[1] Conforms to material requirements only.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

COMPONENTS: Filter Housings[2]
EGWW14  

   
[2] Conforms to the material and structural integrity requirements only.


Number of matching Manufacturers is 1
Number of matching Products is 97
Processing time was 0 seconds