NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, May 12, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=058&Company=44420&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.


NSF/ANSI 58
Reverse Osmosis Drinking Water Treatment Systems



 
FilmTec Corporation 
5400 Dewey Hill Road
Edina, MN 55439 
United States 
952-897-4269
Visit this company's website

Facility : # 1 China

             

COMPONENTS: RO Membrane[1]
DuPont™ TapTec™ TT Plus HF    

   
[1] Certified for material requirements only.


Facility : # 1 Thailand

             

COMPONENTS: RO Membrane
DuPont™ TapTec™ OsmoGold    
DuPont™ TapTec™ TT Plus HF    


Facility : # 2 USA

             

COMPONENTS: Flat Sheet Membranes[1]
BW30 (168881)[Pb]    
BW30 (366479)[Pb]    
BW30LE (366481)[Pb]    
Membrane XLE 37.0 RLC[4] [5] [Pb]    
TW60 35.0 (99052932)    
XLE (216818)[4] [5] [Pb]    
XLE (365877)[4] [5] [Pb]    
XLP (12086217)[Pb]    
XLP (99025011)[Pb]    
eXLE (99110343)[2] [3] [Pb]    

   
[1] Conforms to material requirements only.
[2] Conforms to material requirements only.  Membrane requires a 24 hour flushing and
    conditioning prodecure.
[3] Certified for a maximum surface area to volume ratio of 2.65 square feet/L.
[4] This membrane is Certified at a maximum surface area of 5.5 square feet/L.
[5] This flatsheet is used in a membrane that is associated with a Data Transfer Protocol. 
    Please contact manufacturer for additional details.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

COMPONENTS: Membrane Elements[2]
AQUALAST™ 1812-HR (11112537)[6] [Pb]    
BW60-1812-75[Pb]    
BW60-1812-75 (11018585)[7] [Pb]    
BW60-1812-75 (GMID 99017671)[7] [Pb]    
M-T1812A100 (12027533)[6] [Pb]    
TW30-1812-100HR (11013537)[6] [Pb]    
TW30-1812-50HR (99101033)[6] [Pb]    

   
[2] Conforms to material requirements only.  Membrane requires a 24 hour flushing and
    conditioning prodecure.
[6] These elements have been tested for the reduction of Arsenic, Barium, Cadmium, Chromium
    (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Radium 226/228, Selenium,
    Turbidity, and TDS.  The test data results may be transferred to other manufacturer's
    systems, if the systems meet the requirements contained on the document entitled, "Data
    Transfer Procedure for Devices using Filmtec Reverse Osmosis", dated 12/19/2011.  This
    document is available from FilmTec.
[7] BW60-1812-75 (11018585) and BW60-1812-75 (GMID 99017671) has been tested for the
    reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent),
    Copper, Fluoride, Lead, Radium 226/228, Selenium,Turbidity, and TDS.  The test data
    results may be transferred to other manufacturer's systems, if the systems meet the
    requirements contained on the document entitled, "DataTransfer Procedure for Devices
    using Filmtec Reverse Osmosis", dated 08/13/2010.  This document is available from
    FilmTec.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.


Facility : # 4 China

             

COMPONENTS: RO Membrane
TapTec™ XMF RO Flatsheet    


Number of matching Manufacturers is 1
Number of matching Products is 21
Processing time was 0 seconds