NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 8, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=C0049084&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects

 
Hangzhou Darlly Filtration Equipment Co., Ltd. 
Xindeng Industiral Park, Fuyang
Zhejiang Province 311404 
China 
86 571 63210677

Facility : Zhejiang Province, China

 
           

COMPONENTS: Filter Cartridges[1]
MBPP-X-Y-Z[2]  
MBPP-X-Y-Z-D[3]  
MBPP-X-Y-Z-DG[4]  
MBPP-X-Y-Z-H[5]  
MBPP-X-Y-Z-MG[6]  
MBPP-X-Y-Z-P[5]  

   
[1] Conforms to material requirements only.
[2] X refers to the ID and OD: C=ID 28mm, OD 63mm; E=ID 28mm, OD 115mm; F=ID 30mm, OD 63mm.	
    Y refers to micron rating: 1 µm - 150 µm	
    Z refers to lengths: 5", 7", 9 3/4", 9 7/8", 10", 20", 30", 40", 50", or 60"	
    Includes outer diameter 197 mm and inner diameter 112mm.	
    The 197 mm OD and 112 mm ID cartridge is only available in a 5" length.	
    Includes center core for cartridges with an OD of 63 mm only.	
    No end caps or sealing materials are included.
[3] X refers to the ID and OD: A=ID 112mm, OD 152mm; B=ID 115mm, OD 155mm	
    Y refers to micron rating: 1 µm - 150 µm	
    Z refers to lengths:9 3/4", 9 7/8", 10", 20", 30", 40"	
    D refers to product series: Deltaflow series(Melt Blown PP-D series)	
    No end caps or sealing materials are included.
[4] X refers to the ID and OD: A=ID 28mm, OD 63mm; B=ID 28mm, OD 115mm; C=ID 30mm, OD 63mm	
    Y refers to micron rating: 1 µm - 25 µm	
    Z refers to lengths: 5", 7", 9 3/4", 9 7/8", 10", 20", 30", 40"	
    DG refers to surface appearance: Deep grooved(Melt Blown PP-DG series)	
    Includes center core for cartridges with an OD of 63 mm only.	
    No end caps or sealing materials are included.
[5] X refers to the ID and OD: A=ID 28mm, OD 63mm;B=ID 28mm, OD 115mm; C=ID 30mm, OD 63mm	
    Y refers to micron rating: 1 µm - 150 µm	
    Z refers to lengths: 5", 7", 9 3/4", 9 7/8", 10", 20", 30", 40",50",60"	
    H refers to surface appearance: Orange surface(Melt Blown PP-H series)	
    P refers to surface appearance: Hairy surface(Melt Blown PP-P series)	
    Includes center core for cartridges with an OD of 63 mm only.	
    No end caps or sealing materials are included.
[6] X refers to the ID and OD: A=ID 28mm, OD 63mm; B=ID 30mm, OD 63mm	
    Y refers to micron rating: 1 µm - 25 µm	
    Z refers to lengths: 5", 7", 9 3/4", 9 7/8", 10", 20", 30", 40"	
    MG refers to surface appearance: Mini grooved(Melt Blown PP-MG series)	
    Includes center core for cartridges with an OD of 63 mm only.	
    No end caps or sealing materials are included.

Number of matching Manufacturers is 1
Number of matching Products is 6
Processing time was 0 seconds