NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, November 16, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=044&Company=C0245586&
Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.
NSF/ANSI 44
Cation Exchange Water Softeners
Cation Exchange Water Softeners
| Performance Water Products, Inc. | |
| 6902 Aragon Circle | |
| Buena Park, CA 90620 | |
| United States | |
| 800-374-6428 |
Facility : Buena Park, CA
| Flow Rate | ||||||
| Brand Name / Trade Name / Model | (gpm) | Claim | ||||
|
Point-of-Entry [POE] |
||||||
| 9100TS-2.0[1] | 7.9 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| 9100TS-4.5[1] | 11.5 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
[1] Product evaluated and determined to comply with efficiency rating requirements defined
by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
hardness removed per pound of regenerant salt (477 grams of hardness removed per
kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
|
||||||
Facility : Mukwonago, WI
| Flow Rate | ||||||
| Brand Name / Trade Name / Model | (gpm) | Claim | ||||
|
Point-of-Entry [POE] |
||||||
| 9100TS-2.0[1] | 7.9 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
| 9100TS-4.5[1] | 11.5 | Efficiency Rated[ER] Hardness Reduction[HR] |
||||
[1] Product evaluated and determined to comply with efficiency rating requirements defined
by California state laws.
[ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of
hardness removed per pound of regenerant salt (477 grams of hardness removed per
kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant
water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per
64.8 grams of hardness removed).
[HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness
have been verified.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
|
||||||
Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds
