NSF Product and Service Listings
These NSF Official Listings are current as of Monday, November 3, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=042&Company=C0597942&
Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.
NSF/ANSI 42
Drinking Water Treatment Units - Aesthetic Effects
Drinking Water Treatment Units - Aesthetic Effects
| Xiamen Filtertech Industrial Corporation | |
| No. 305 Siming Park | |
| Tong'an Industrial Concentration Area | |
| Xiamen, Fujian 361100 | |
| China | |
| 86 592 711 7980 |
Facility : Fujian, China
|
COMPONENTS: Carbon Block[3] [Pb] |
||||||
| FCBS1-X-Y-L | ||||||
|
  [3] FCBS1-X—Y-L Where:
X-outer diameter
Y-inner diameter
L-length
The models listed below have been evaluated to meet the performance requirements of
NSF/ANSI Standards 42, 53, and 401 for the following contaminants at the stated capacity
and flow rate: Particulate Class I, Asbestos, Cyst, Meprobamate, Atenolol,
Carbamazepine, DEET, Metolachlor, Trimethoprim, Linuron, Phenytoin, Ibuprofen, Naproxen,
Estrone, Bisphenol A, Nonyl Phenol, and VOC.
(Outer Diameter x Inner Diameter x Length)
2.5 x 1.2 x 10.0: 755gal 0.5 gpm
2.5 x 0.8 x 10.0: 865gal 0.5 gpm
2.5 x 0.8 x 7.6: 650gal 0.5 gpm
2.5 x 1.0 x 10.0: 820gal 0.5 gpm
2.3 x 1.0 x 7.6: 540gal 0.5 gpm
2.3 x 1.2 x 7.6: 490gal 0.5 gpm
1.7 x 0.6 x 3.9: 165gal 0.5 gpm
1.7 x 0.6 x 5.5: 235gal 0.5 gpm
1.7 x 0.8 x 5.5: 210gal 0.5 gpm
1.9 x 0.6 x 3.9: 195gal 0.5 gpm
1.9 x 0.5 x 3.9: 205gal 0.5 gpm
1.7 x 0.7 x 6.3: 230gal 0.5 gpm
1.7 x 0.7 x 10.4: 385gal 0.5 gpm
1.7 x 0.7 x 7.0: 255gal 0.5 gpm
1.7 x 0.7 x 7.6: 280gal 0.5 gpm
1.7x 0.7 x 10.1: 370gal 0.5 gpm
1.7 x 0.7 x 6.2: 225gal 0.5 gpm
1.7 x 0.7 x 10.0: 370gal 0.5 gpm
1.5 x 0.4 x 7.6: 240gal 0.5 gpm
1.2 x 0.4 x 6.1: 115gal 0.5 gpm
1.2 x 0.4 x 4.6: 75gal 0.5 gpm
1.2 x 0.4 x 6.7: 125gal 0.5 gpm
1.8 x 0.6 x 5.4: 235gal 0.5 gpm
2.0 x 0.8 x 10.0: 515gal 0.5 gpm
2.0 x 1.0 x 9.1: 430gal 0.5 gpm
1.9 x 0.6 x 2.4: 130gal 0.5 gpm
1.9 x 0.5 x 7.6: 430gal 0.5 gpm
2.0 x 0.8 x 3.5: 180gal 0.5 gpm
1.5 x 0.4 x 4.4: 140gal 0.5 gpm
1.2 x 0.4 x 7.2: 135gal 0.5 gpm
1.2 x 0.4 x 7.2: 155gal 0.5 gpm
1.5 x 0.5 x 6.2: 195gal 0.5 gpm
2.2 x 0.6 x 2.6: 190gal 0.5 gpm
1.2 x 0.4 x 5.5: 105gal 0.5 gpm
1.7 x 0.9 x 2.8: 90gal 0.5 gpm
1.2 x 0.4 x 4.4: 95gal 0.5 gpm
1.2 x 0.4 x 6.0: 130gal 0.5 gpm
1.4 x 0.5 x 3.9: 105gal 0.5 gpm
1.5 x 0.5 x 5.9: 180gal 0.5 gpm
1.5 x 0.5 x 3.5: 110gal 0.5 gpm
2.3 x 1.0 x 3.1: 220gal 0.5 gpm
[Pb] Product also evaluated and determined to possess weighted average lead content of
<=0.25% and complies with lead content requirements for “lead free” plumbing as defined
by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
Water Act.
|
||||||
|
COMPONENTS: Filter Cartridges[1] |
||||||
| FT-NZXXXX Membrane[2] | ||||||
|
  [1] Conforms to material requirements only. [2] XXXX - serial number. |
||||||
Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds

