NSF Product and Service Listings

[1] Conforms to the material and structural integrity requirements only.
[2] YY - Length (5", 6", 10", 11")
[3] Q - Quick Connect.
[4] Certified for material requirements only.
[5] F-UDF-WW-LL where:
    WW - Outer Diameter (in)
    LL - Length (in)
    Outer Diameter of 2.81in can have a length of 5 in, 9 in, 9.5 in, 10 in, and 20 in.
    Outer Diameter of 2.82in can have a length of 5 in, 9 in, 9.5 in, 10 in, and 20 in.
[6] F-UDFB-WW-LL where:
    WW - Outer Diameter (in)
    LL - Length (in)
    Outer diameter of 4.6 in, has length of 10 in or 20 in.
[7] Conforms to material requirement only.
[8] Where:
    LL  - Length 1" - 70"
    W   - Outer diameter 36 mm - 180 mm
    X   - Inner diameter 20 mm - 120 mm
    ZZZ - Retention rating 1 micron - 100 micons
[9] LL - Length (100-1004 mm)
    W - Outer Diameter (30-105 mm)
    X - Inner Diameter (13-50 mm)
    ZZZ - Retention Rating (0.5 - 10 um)
    Inner Diameter of 30mm has outer diameter of 63.5mm, has length of 5, 10, 20,30 or 40
    inches. Inner Diameter of 38mm has Outer Diameter of 63mm, has length of 10 , 20,30 or
    40 inches, Inner Diameter of 42mm has Outer Diameter of 69mm, has length of 10 or 20,30
    or 40 inches, Inner Diameter of 50mm has outer diameter of 105mm, has length of 10, 20
    inches.
[10] LL - Length (5, 10, or 20 in) (when X = 63, 67 or 72 mm LL = 5, 10 or 20 in and when X
     = 113 mm LL = 10 or 20 in)
     X - Outer Diameter (63, 67, 72 or 113 mm)
     W - Inner Diameter (28 mm)
     Micron Rating - 0.5, 1, 5, 10, 25, or 50 um
[11] 1FCTO-228.4-6338-ZZZ Tested in a system at a flow rate of 1.0 gpm to a capacity of 6,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42.
     1FCTO-254-6338-ZZZ Tested in a system at a flow rate of 1.0 gpm to a capacity of 6,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-508-6338-ZZZ Tested in a system at a flow rate of 2.0 gpm to a capacity of 12,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-127-6338-ZZZ Tested in a system at a flow rate of 0.5 gpm to a capacity of 3,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-241-6338-ZZZ Tested in a system at a flow rate of 1.0 gpm to a capacity of 5,600
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-762-6338-ZZZ Tested in a system at a flow rate of 3.0 gpm to a capacity of 18,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-254-10550-ZZZ Tested in a system at a flow rate of 2.0 gpm to a capacity of 14,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-381-10550-ZZZ Tested in a system at a flow rate of 3.0 gpm to a capacity of 21,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-1016-10550-ZZZ Tested in a system at a flow rate of 4.0 gpm to a capacity of
     24,000 gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-508-10550-ZZZ Tested in a system at a flow rate of 4.0 gpm to a capacity of 28,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
[12] FCTO-228.4-6338-ZZZ Tested in a system at a flow rate of 1.0 gpm to a capacity of 6,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42.
     FCTO-254-6338-ZZZ Tested in a system at a flow rate of 1.0 gpm to a capacity of 6,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-508-6338-ZZZ Tested in a system at a flow rate of 2.0 gpm to a capacity of 12,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-127-6338-ZZZ Tested in a system at a flow rate of 0.5 gpm to a capacity of 3,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-241-6338-ZZZ Tested in a system at a flow rate of 1.0 gpm to a capacity of 5,600
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-762-6338-ZZZ Tested in a system at a flow rate of 3.0 gpm to a capacity of 18,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-254-10550-ZZZ Tested in a system at a flow rate of 2.0 gpm to a capacity of 14,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-381-10550-ZZZ Tested in a system at a flow rate of 3.0 gpm to a capacity of 21,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     FCTO-1016-10550-ZZZ Tested in a system at a flow rate of 4.0 gpm to a capacity of 24,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
     1FCTO-508-10550-ZZZ Tested in a system at a flow rate of 4.0 gpm to a capacity of 28,000
     gal for the reduction of Chlorine and Taste & Odor per NSF/ANSI 42
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Conforms to material and structural integrity requirements only.

[1] Certified for material requirements only.

[1] Conforms to material requirements only.
[2] Conforms to material requirements only.  Membrane requires a 24 hour flushing and
    conditioning prodecure.
[3] Certified for a maximum surface area to volume ratio of 2.65 square feet/L.
[4] This membrane is Certified at a maximum surface area of 5.5 square feet/L.
[5] This flatsheet is used in a membrane that is associated with a Data Transfer Protocol. 
    Please contact manufacturer for additional details.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[2] Conforms to material requirements only.  Membrane requires a 24 hour flushing and
    conditioning prodecure.
[6] These elements have been tested for the reduction of Arsenic, Barium, Cadmium, Chromium
    (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Radium 226/228, Selenium,
    Turbidity, and TDS.  The test data results may be transferred to other manufacturer's
    systems, if the systems meet the requirements contained on the document entitled, "Data
    Transfer Procedure for Devices using Filmtec Reverse Osmosis", dated 12/19/2011.  This
    document is available from FilmTec.
[7] BW60-1812-75 (11018585) and BW60-1812-75 (GMID 99017671) has been tested for the
    reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent),
    Copper, Fluoride, Lead, Radium 226/228, Selenium,Turbidity, and TDS.  The test data
    results may be transferred to other manufacturer's systems, if the systems meet the
    requirements contained on the document entitled, "DataTransfer Procedure for Devices
    using Filmtec Reverse Osmosis", dated 08/13/2010.  This document is available from
    FilmTec.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certified for material requirements only.
[2] TW  - Fixed code
    WW  - 1.8 - 3.5 Membrane element diameter in inches
    LL  - 7-13 Membrane element length in inches
    ZZZ - 020-1000 GPD
    VVV - Vendor Code

[3] Certified for material and structural integrity requirements only.

[1] Conforms to material and structural integrity requirements only.