NSF Product and Service Listings

[1] Conforms to material and structural integrity requirements only.
[2] MS040 - Series Code
    XXX   - 956-957
    YYY   - 954-955
[3] QQQ - Series Code  AAA-ZZZ
    5   - 5" Length
    10  - 10" Length
    BL  - Blue Body Color 
    W   - Custom Code
    WH  - White Body Color
    XX  - Cap Color
    YY  - 1/4" - 3/4"
    ZZ  - Pressure Relie
[4] QQQQ - Series Code  AAAA-ZZZZ
    10   - 10" Length
    20   - 20" Length
    BK   - Black Body Color
    BL   - Blue Body Color
    GR   - Grey Body Color
    W    - Custom Code
    XX   - Cap Color
    YY   - 3/4" - 1 1/5"
    ZZ   - Pressure Relief

[1] Conforms to material and structural integrity requirements only.
[2] XX - Indicates outer diameter: 1.5" - 7"
    YY - Indicates length: 1" - 70"
    ZZ - Indicates micron: 1m - 100m

[1] Conforms to material requirements only.

[1] Certified for material requirements only.
[2] XX - 63-113 mm Diameter
    YY - 127-1016 mm Length
    ZZ - 0.5 - 10 microns
[3] CB - 63-113 mm Diameter
    P  - Post Filter
    XX - 127-1016mm Length

[1] Certified for material safety only.
[2] Certification does not include inner core, adapters, o-rings, gaskets, or end caps.
[3] A29:A43		
    Sediment Bonded Cartridge (SBX-XX-YYZZ) 		
    Sediment Grooved Cartridge (SGC-XX-YYZZ) 		
    Sediment Grooved Cartridge (SGX-XX-YYZZ) 		
    Sediment Depth Cartridge (SDC-XX-YYZZ) 		
    Sediment Depth Cartridge (SDX-XX-YYZZ) 		
    Sediment Wound Cartridge (SWC-XX-YYZZ) 		
    Sediment Wound Cartridge (SWX-XX-YYZZ) 		
        		
    XX -  1.5" – 8"  Diameter		
    YY - 2" – 60"  Length		
    ZZ - 0.5m – 200m  Micron Rating		
        		
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.		
    
[4] Sediment Bonded Cartridge (WW-SB-XXYYZZ) 		
    Sediment Grooved Cartridge (WW-SG-XXYYZZ) 		
    Sediment Depth Cartridge (WW-SD-XXYYZZ)		
    
    WW - Internal Code AA-ZZ 		
    XX - 1.5" – 8" Diameter 		
    YY - 2" – 60" Length 		
    ZZ - 0.5m – 200m Micron Rating		
        		
    *Special lengths and diameters within the certified range are included in the
    certification such as 2 1/4" diameter and 30 1/4" length.		
    
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.
[POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

[5] Conforms to material and structural integrity requirements only.
[6] MS040 - Series Code
    XXX - 956-957
    YYY - 954-955
[7] QQQ - Series Code AAA-ZZZ
    10 - 10" Length
    BL - Blue Body Color
    WH - White Body Color
    XX - Cap Color
    YY - 1/4" - 3/4"
    ZZ - Pressure Relie
[8] QQQQ - Series Code AAAA-ZZZZ
    10 - 10" Length
    20 - 20" Length
    BL - Blue Body Color
    GR - Grey Body Color
    W   -  Custom Code
    XX - Cap Color
    YY - 3/4" - 1 1/5"
    ZZ - Pressure Relief

[1] HBBC-150-PXX is denoted as follows:
    HBBC: Big Flow Cartridge
    150: GPM
    P: Pleated
    XX: 1 (1), 5 (5), 20 (20), 50 (50) Micron Rating
[2] HSC-XX-YYY is denoted as follows:
    XX: Length - 40 (9 5/8”) , 90 (19 ½”), 170 (30 ¾”)
    YYY: 0.2, 0.35, 0.45, 1, 5, 10, 20, 50, 100, 150 Micron Rating
    PPA or blank: PPA (Pleated All Poly), blank (Pleated Synthetic)
[3] HHFEC-XX-YY is denoted as follows:
    HHFEC: High Flow Filter Cartridges
    XX: 0.2 (0.2), 01 (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50), 70 (70) Micron Rating
    YY: 20”, 23” (Blank), 40”, 60”
[4] HSC-XXX-LT2 is denoted as follows:
    XXX: Length - 40 (9 5/8”) , 90 (19 ½”), 170 (30 ¾”)
    LT2: 1 micron absolute
[5] SPC-XXX-YYZZZ is denoted as follows:
    SPC: Sediment Pleated Cartridge
    XXX: Outside Diameter – 25 (2.5”), 45 (4.5”)
    YY: Length - 10 (9 7/8”), 20 (20”), 30 (30”), 40 (40”)
    ZZZ: 0.2 (0.2), 01 (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50), 100 (100) Micron
    Rating
[6] SPX-XXX-YYZZZ is denoted as follows:
    SPX: Sediment Pleated Cartridge
    XXX: Outside Diameter – 25 (2.5”), 45 (4.5”)
    YY: Length - 10 (9 7/8”), 20 (20”), 30 (30”), 40 (40”)
    ZZZ: .2A (0.2), .35 (0.35), 01 or 01A (1), 05 (5), 10 (10), 20 (20), 30 (30), 50 (50),
    100 (100) Micron Rating
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

[1] Certified for the mesh sizes 16-50.

[1] Conforms to the material and structural integrity requirements only.

[1] Conforms to material and structural integrity requirements only.

* This product is intended for use only on water supplies that have been shown to be at or
  below the referenced concentration and valency of arsenic.
[1] Associated with a data transfer protocol.  Test data results may be transferred to other
    manufacturer's systems if the systems meet requirements contained on the document
    entitled, "Data Transfer Procedure for Devices using Hydrondix Reverse Osmosis."  This
    document is available from Hydronix Water Technology.