NSF Product and Service Listings

NSF Product and Service Listings

Connect with NSF

These NSF Official Listings are current as of Thursday, December 26, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/DWTU/Listings.asp?Standard=044&hdModlStd=ModlStd&

Note: Certain claims, such as Arsenic (Pentavalent) Reduction, appear as active links, allowing you to access additional information regarding the specific contaminants.

NSF/ANSI 44
Cation Exchange Water Softeners

A. O. Smith Corporation
11270 West Park Place
Milwaukee, WI 53224
United States
414-359-4290

Facility : Groveport, OH

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry [POE]
AO-WH-SOFT-350[1]	7.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
AO-WH-SOFT-400T[1]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
AO-WH-SOFT-450T[1]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
AO-WH-SOFT-PRO-300[1]	9.1	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
AO-WH-SOFT-PRO-500[1]	7	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
AOW-S400[1]	7.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
AOW-S500[1]	7	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
[1] Product evaluated and determined to comply with efficiency rating requirements defined by [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Allwin Watertec Co., Ltd.
No. 3, Ln. 45, Sec. 3, Dafu Rd
Tanzi Dist.
Taichung 42748
Taiwan
886 4 25311188

Facility : #1 China

Anhui Sanxing Resin Technology Co., Ltd.
Sanxing Road
Guzhen Eco. Dev. Zone
Bengbu, Anhui 233705
China
86 552 656 6368

Facility : Bengbu, Anhui, China


COMPONENTS: Media, Cation Exchange Resin[1]
001×7NAFG
001×8NAFG
001×10NAFG
D113HFG
[1] Certified for the mesh sizes 16-50.

Aquamaster
4343 South Hamilton Road
Groveport, OH 43125
United States
614-836-9422
Visit this company's website

Facility : Groveport, OH

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry [POE]
AMP5000[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
AMP5100[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
AMP5500[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
AMS 700[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
AMS 900[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
AMS 950[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Aquatrol c/o Hydronix Water Technology
8630 Rochester Avenue
Rancho Cucamonga, CA 91730
United States
909-527-6996
Visit this company's website

Facility : 2D

Aquion, Inc.
101 South Gary Avenue
Roselle, IL 60172
United States
847-437-9400
Visit this company's website

Facility : Roselle, IL

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry [Pb] [POE]
Rainsoft EC4 100 CT[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100 CV[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100 T[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100 V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100S CT[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100S CV[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100S T[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 100S V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 150 CT[1]	9.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 150 CV[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 150 T[1]	9.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 150 V[1]	9	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 250 CT[1]	11.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 250 CV[1]	10.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 250 T[1]	11.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 250 V[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 400 CT[1]	10.8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 400 CV[1]	11.3	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 400 T[1]	10.8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 400 V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50 CT	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50 CV[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50 T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50 V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50SS CT	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50SS CV[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50SS T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 50SS V[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 60S CT	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 60S CV[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 60S T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 60S V[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 75 CT	9.4	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 75 CV[1]	9.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 75 T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC4 75 V[1]	8.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100 CT[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100 CV[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100 T[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100 V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100S CT[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100S CV[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100S T[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 100S V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 150 CT[1]	9.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 150 CV[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 150 T[1]	9.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 150 V[1]	9	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 250 CT[1]	11.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 250 CV[1]	10.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 250 T[1]	11.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 250 V[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 400 CT[1]	10.8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 400 CV[1]	11.3	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 400 T[1]	10.8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 400 V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50 CT	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50 CV[1]	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction Efficiency Rated[ER]
Rainsoft EC5 50 T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50 V[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50SS CT	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50SS CV[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50SS T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 50SS V[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 60S CT	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 60S CV[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 60S T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 60S V[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 75 CT	9.4	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 75 CV[1]	9.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 75 CV[1]	9.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 75 T	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft EC5 75 V[1]	8.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC 75 CV	9.2	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC 75 V	8.6	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 100 CV[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 100S CD[1]	10	Barium Reduction Hardness Reduction[HR] Radium 226/228 Reduction Efficiency Rated[ER]
Rainsoft TC-M 100S D[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 150 CD[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 150 CV[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 150 D[1]	9	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 250 CD[1]	10.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 250 D[1]	10.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 400 CD[1]	11.3	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 400 D[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 50 CD[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 50 D[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 50SS CD[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 50SS D[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 60S D[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 75 CD[1]	9.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 75 CV[1]	9.2	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Rainsoft TC-M 75 D[1]	8.6	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
TC-M 60S CD[1]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
TC-M 100 CD[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
TC-M 100 D[1]	10	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California State laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Brio Water Technology, Inc.
768 Turnbull Canyon Rd.
City of Industry, CA 91745
United States
800-781-1680

Facility : China

[1] Trade names FLRZ3396, FLRZ3402 are certified for particle size 0.315-1.25 mm.
[2] Certified for a maximum use level of 800 g/L.

Canature Health Technology Group Co., Ltd.
No. 508 & 518, Chuanda Road
Pudong New Area
Shanghai, 201200
China
86 21 5859 9999
Visit this company's website

Facility : Cixi, Zhejiang, China

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry[1] [Pb] [POE]
CN-0717-679	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-07SEF	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0815-991	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0817-792	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0822-1302	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0822-1303	4.6	Hardness Reduction[HR] Efficiency Rated[ER]
CN-08SEF	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0917-936	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-09SEF	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1015-1160	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1017-1245	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1017-1387	4.9	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1024-1670	5.9	Hardness Reduction[HR] Efficiency Rated[ER]
CN-12SEF	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-13SEF	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CS10H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS12H-0926	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS13H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS15H-1015	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS16H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS17H-1015	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS18H-1015	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS18H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS19H-1015	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS21H-0926	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS22H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS3H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS3L-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS4H-0817	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS4L-0817	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS5H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS6H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS6L-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS7H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8F-0815	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8F-0824	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CS8H PLUS-0815	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8H PLUS-0824	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CS8H-0722	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8L-0722	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS9H-0815	4	Hardness Reduction[HR] Efficiency Rated[ER]
CSF25H-0817	4	Hardness Reduction[HR] Efficiency Rated[ER]
[1] Conforms to material and structural integrity requirements. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Facility : Jiangsu, China


COMPONENTS: Tanks, Water Softener[1]
Pressure Vessel 4" 3072
Pressure Vessel 4"-4" 3072
Pressure Vessel 4"-4" 3672
Pressure Vessel 6"-6" 3072
Pressure Vessel 6"-6" 3672
Pressure Vessel 6"-6" 4272
Pressure Vessel 6"-6" 4872
Pressure Vessel 6"-6" 5872
Pressure Vessel 6"-6" 6367
Pressure Vessel 6"-6" 6386
[1] Conforms to material and structural integrity requirements.

Facility : Shanghai, China

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry[1] [Pb] [POE]
CS19H-1015	4.4	Efficiency Rated[ER] Hardness Reduction[HR]
CS22H-1017	4.4	Efficiency Rated[ER] Hardness Reduction[HR]
CSF25H-0817	4	Efficiency Rated[ER] Hardness Reduction[HR]
CN-07SEF	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0815-991	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-08SEF	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0917-936	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-09SEF	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1015-1160	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8L-0722	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8H-0722	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8H PLUS-0815	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS9H-0815	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS4L-0817	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS6L-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS6H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS7H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS13H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS18H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1017-1245	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS4H-0817	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8F-0815	4	Efficiency Rated[ER] Hardness Reduction[HR]
CN-1017-1274	4.5	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0822-1303	4.6	Hardness Reduction[HR] Efficiency Rated[ER]
CN-13SEF	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CS5H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1017-1387	4.9	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0822-1302	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CN-1024-1670	5.9	Hardness Reduction[HR] Efficiency Rated[ER]
CS12H-0926	4	Hardness Reduction[HR] Efficiency Rated[ER]
CS15H-1015	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS17H-1015	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS3L-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS3H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS8F-0824	5.18	Efficiency Rated[ER] Hardness Reduction[HR]
CS18H-1015	4.4	Efficiency Rated[ER] Hardness Reduction[HR]
CS8H PLUS-0824	5.18	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0717-679	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-0817-792	4	Hardness Reduction[HR] Efficiency Rated[ER]
CN-12SEF	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS10H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS16H-1017	4.4	Hardness Reduction[HR] Efficiency Rated[ER]
CS21H-0926	4	Efficiency Rated[ER] Hardness Reduction[HR]
[1] Conforms to material and structural integrity requirements. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Tanks, Water Softener[1] [2] [10] [Pb]
Pressure Vessel 10x26 F
Pressure Vessel 10x40 F
Pressure Vessel 09x42 F
Pressure Vessel 10x54 F
Pressure Vessel 10x47 F
Pressure Vessel 10x35 F
Pressure Vessel 10x33 F
Pressure Vessel 08x25 F
Pressure Vessel 09x14 F
Pressure Vessel 08x19 F
Pressure Vessel 09x26 F
Pressure Vessel 10x13 F
Pressure Vessel 10x28 F
Pressure Vessel 09x15 F
Pressure Vessel 09x34 F
Pressure Vessel 08x35 F
Pressure Vessel 06x16 F
Pressure Vessel 10x24 F
Pressure Vessel 10x17 F
Pressure Vessel 09x48 F
Pressure Vessel 09x35 F
Pressure Vessel 5x17
Pressure Vessel 5x20
Pressure Vessel 7x13
Pressure Vessel 7x17
Pressure Vessel 7x19
Pressure Vessel 7x22
Pressure Vessel 7x30
Pressure Vessel 7x35
Pressure Vessel 7x44
Pressure Vessel 8x15
Pressure Vessel 8x17
Pressure Vessel 8x30
Pressure Vessel 8x35
Pressure Vessel 8x44
Pressure Vessel 9x35
Pressure Vessel 9x42
Pressure Vessel 9x48
Pressure Vessel 10x15
Pressure Vessel 10x17
Pressure Vessel 10x24
Pressure Vessel 10x26
Pressure Vessel 10x30
Pressure Vessel 10x35
Pressure Vessel 10x40
Pressure Vessel 10x44
Pressure Vessel 10x47
Pressure Vessel 10x54
Pressure Vessel 11x35
Pressure Vessel 11x44
Pressure Vessel 12x48
Pressure Vessel 12x52
Pressure Vessel 13x44
Pressure Vessel 13x54
Pressure Vessel 14x52
Pressure Vessel 14x65
Pressure Vessel 16x24
Pressure Vessel 16x36
Pressure Vessel 16x44
Pressure Vessel 16x52
Pressure Vessel 16x65
Pressure Vessel 18x36
Pressure Vessel 18x53
Pressure Vessel 18x65
Pressure Vessel 21x36
Pressure Vessel 21x53
Pressure Vessel 21x62
Pressure Vessel 24x72
Pressure Vessel 2.5" 05x17
Pressure Vessel 2.5" 05x20
Pressure vessel 2.5" 06×13
Pressure Vessel 2.5" 06x17
Pressure Vessel 2.5" 06x18
Pressure Vessel 2.5" 06x22
Pressure vessel 2.5" 06x29
Pressure vessel 2.5" 06x30
Pressure Vessel 2.5" 06x35
Pressure Vessel 2.5" 07x13
Pressure Vessel 2.5" 07x17
Pressure Vessel 2.5" 07x19
Pressure Vessel 2.5" 07x22
pressure vessel 2.5" 07x24
Pressure Vessel 2.5" 07x30
Pressure Vessel 2.5" 07x35
Pressure Vessel 2.5" 07x44
Pressure Vessel 2.5" 08x13
Pressure vessel 2.5" 08x13D
Pressure Vessel 2.5" 08x15
Pressure Vessel 2.5" 08x17
Pressure Vessel 2.5" 08x18
Pressure Vessel 2.5" 08x22
Pressure Vessel 2.5" 08x24
Pressure Vessel 2.5" 08x26
Pressure Vessel 2.5" 08x30
Pressure Vessel 2.5" 08x35
Pressure vessel 2.5" 08x37
Pressure vessel 2.5" 08x40
Pressure Vessel 2.5" 08x44
Pressure vessel 2.5" 08x44DH
Pressure Vessel 2.5" 09x13
Pressure Vessel 2.5" 09x15
Pressure vessel 2.5" 09x16DH
Pressure Vessel 2.5" 09x17
Pressure Vessel 2.5" 09x18
Pressure Vessel 2.5" 09x24
Pressure Vessel 2.5" 09x26
Pressure Vessel 2.5" 09x30
Pressure Vessel 2.5" 09x35
Pressure vessel 2.5" 09x36DH
Pressure Vessel 2.5" 09x42
Pressure vessel 2.5" 09x42DH
Pressure Vessel 2.5" 09x48
Pressure vessel 2.5" 09x48DH
Pressure Vessel 2.5" 10x13
Pressure Vessel 2.5" 10x15
Pressure Vessel 2.5" 10x17
Pressure vessel 2.5" 10x18
Pressure vessel 2.5" 10x19
Pressure Vessel 2.5" 10x24
Pressure Vessel 2.5" 10x26
Pressure Vessel 2.5" 10x30
Pressure Vessel 2.5" 10x35
Pressure Vessel 2.5" 10x40
Pressure vessel 2.5" 10x40DH
Pressure Vessel 2.5" 10x44
Pressure vessel 2.5" 10×44DH
Pressure Vessel 2.5" 10x47
Pressure vessel 2.5" 10×47DH
Pressure Vessel 2.5" 10x54
Pressure vessel 2.5" 10×54DH
Pressure Vessel 2.5" 11x35
Pressure Vessel 2.5" 11x44
Pressure Vessel 2.5" 12x17
Pressure Vessel 2.5" 12x48
Pressure vessel 2.5" 12×48DH
Pressure Vessel 2.5" 12x52
Pressure vessel 2.5" 10×52DH
Pressure vessel 2.5" 13x24
Pressure Vessel 2.5" 13x44
Pressure Vessel 2.5" 13x54
Pressure Vessel 2.5" 14x52
Pressure Vessel 2.5" 14x65
Pressure Vessel 2.5" 16x24
Pressure Vessel 2.5" 16x36
Pressure Vessel 2.5" 16x44
Pressure Vessel 2.5" 16x52
Pressure Vessel 2.5" 16x65
Pressure Vessel 2.5 in 08x13D
Pressure Vessel 2.5 in 10x17D
Pressure Vessel 2.5 in 10x35D
Pressure Vessel 4" 12x17
Pressure Vessel 4" 12x48
Pressure vessel 4" 12×48DH
Pressure Vessel 4" 12x52
Pressure vessel 4" 12×52DH
Pressure vessel 4" 13x24
Pressure Vessel 4" 13x44
Pressure Vessel 4" 13x54
Pressure Vessel 4" 14x52
Pressure Vessel 4" 14x65
Pressure Vessel 4" 16x24
Pressure Vessel 4" 16x36
Pressure Vessel 4" 16x44
Pressure Vessel 4" 16x52
Pressure vessel 4" 16x52D
Pressure Vessel 4" 16x65
Pressure Vessel 4" 18x36
Pressure Vessel 4" 18x53
Pressure Vessel 4" 18x65
Pressure Vessel 4" 21x36
Pressure Vessel 4" 21x53
Pressure Vessel 4" 21x62
Pressure Vessel 4" 24x38
Pressure Vessel 4" 24x72
Pressure Vessel 4" 3072
Pressure Vessel 4"-4" 3072
Pressure Vessel 6"-6" 3072
Pressure Vessel 4"-4" 3672
Pressure Vessel 6"-6" 3672
Pressure Vessel 6"-6" 4272
Pressure Vessel 6"-6" 4872
Pressure Vessel 6"-6" 5872
Pressure Vessel 6"-6" 6367
Pressure Vessel 6"-6" 6386
Pressure Vessel 4 in 16x65D
Pressure Vessel 4 in 18x65D
Pressure Vessel 4 in 21x62D
Pressure Vessel 4 in 24x38D
Pressure Vessel 4 in 24x72D
[1] Conforms to material and structural integrity requirements. [2] All models listed may be available in a variety of colors, including but not limited to: natural, black, green, gray, blue, etc. [10] The "x" in the trade name may be omitted. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
COMPONENTS: Valves, Water Softener / Filter[1] [Pb]
565[3]
465[3]
8651SEF[3]
8650SET[3]
85TA[3]
CONTROL VALVE BNT3890T[4] [5]
CONTROL VALVE BNT3890F[4] [5]
89[4] [5]
Control Valve BNT 5851T[3]
Control Valve BNT 5851F[3]
Control Valve BNT5850T[3]
Control Valve BNT 5850F[3]
CONTROL VALVE BNT3891T[4] [5]
CONTROL VALVE BNT3891F[4] [5]
8650SEF[3]
865[3]
85HE[3]
485HE[3]
365[3]
95[6] [7]
85[3]
585HE[3]
65[3]
165[3]
665[3]
185[3]
265[3]
765[3]
785HE[3]
185HE[3]
485HE[3]
585HE[3]
585SE[3]
85HE[3]
BNT 7650F
BNT 7650T
BNT 7651F
BNT 7651T
BNT790T
BNT790F
BNT791T
BNT791F
BNT 2850HEF
BNT 2850HET
BNT 2851HEF
BNT 2851HET
BNT 850SEUF
BNT 851SEUF
BNT 850SEF
BNT 850SET
BNT 851SEF
BNT 851SET
BNT 5850SEUF
BNT 5851SEUF
BNT 5850SEF
BNT 5850SET
BNT 5851SEF
BNT 5851SET
BNT7850HEF
BNT 7850HET
BNT 7851HEF
BNT 7851HET
BNT950 MTS slave valve
BNT951MTS slave valve
BNT1890F
BNT1890T
BNT1891F
BNT1891T
BNT2890F
BNT2890T
BNT2891F
BNT2891T
BNT4890F
BNT4890T
BNT4891F
BNT4891T
BNT5890F
BNT5890T
BNT5891F
BNT5891T
CAN165[3]
CAN265[3]
CAN365[3]
CAN465[3]
CAN565[3]
CAN65[3]
Control Valve BNT 1650F[3]
Control Valve BNT 1650T[3]
Control Valve BNT 1651F[3]
Control Valve BNT 1651T[3]
Control Valve BNT 1850F[3]
Control Valve BNT 1850HEF[3]
Control Valve BNT 1850HET[3]
Control Valve BNT 1850T[3]
Control Valve BNT 1851F[3]
Control Valve BNT 1851HEF[3]
Control Valve BNT 1851HET[3]
Control Valve BNT 1851T[3]
Control Valve BNT 2650F[3]
Control Valve BNT 2650T[3]
Control Valve BNT 2651F[3]
Control Valve BNT 2651T[3]
Control Valve BNT 3650F[3]
Control Valve BNT 3650T[3]
Control Valve BNT 3651F[3]
Control Valve BNT 3651T[3]
Control Valve BNT 4650F[3]
Control Valve BNT 4650T[3]
Control Valve BNT 4651F[3]
Control Valve BNT 4651T[3]
Control Valve BNT 4850HEF[3]
Control Valve BNT 4850HET[3]
Control Valve BNT 4851HEF[3]
Control Valve BNT 4851HET[3]
Control Valve BNT 5650F[3]
Control Valve BNT 5650T[3]
Control Valve BNT 5651F[3]
Control Valve BNT 5651T[3]
Control Valve BNT 5850HEF[3]
Control Valve BNT 5850HET[3]
Control Valve BNT 5851HEF[3]
Control Valve BNT 5851HET[3]
Control Valve BNT 650F[3]
Control Valve BNT 650T[3]
Control Valve BNT 651F[3]
Control Valve BNT 651T[3]
Control Valve BNT 6650F[3]
Control Valve BNT 6650T[3]
Control Valve BNT 6651F[3]
Control Valve BNT 6651T[3]
Control Valve BNT 750S[3]
Control Valve BNT 850F[3]
Control Valve BNT 850HEF[3]
Control Valve BNT 850HET[3]
Control Valve BNT 850T[3]
Control Valve BNT 851F[3]
Control Valve BNT 851HEF[3]
Control Valve BNT 851HET[3]
Control Valve BNT 851T[3]
Control Valve BNT 8650F[3]
Control Valve BNT 8650T[3]
Control Valve BNT 8651F[3]
Control Valve BNT 8651T[3]
CONTROL VALVE BNT890F[4] [5]
CONTROL VALVE BNT890T[4] [5]
CONTROL VALVE BNT891F[4] [5]
CONTROL VALVE BNT891T[4] [5]
CONTROL VALVE BNT950T[6] [7]
CONTROL VALVE BNT950F[6] [7]
CONTROL VALVE BNT951T[6] [7]
CONTROL VALVE BNT951F[6] [7]
IWT165[3]
IWT265[3]
IWT365[3]
IWT565[3]
IWT65[3]
NVO165[3]
NVO465[3]
NVO865[3]
[1] Conforms to material and structural integrity requirements. [3] The 65, 75, 85 indicate the model of the valves and may be followed by either a 0 or a 1 and either an F or a T. The 0 models are for use with water softeners. The 1 models are for use with in-line water filters. F indicates control valve with meter. T indicates control valve with timer. S indicates the valve is controlled by a microswitch. A complete model number example is "BNT 651F". BNT indicates control valve trade name for all world markets. IWT/NVO/CAN models are sold in North America by Canature North America. [4] The 89 indicates the model of the valves and may be followed by either a 0 or a 1 and either an F or a T. The 0 models are for use with water softeners. The 1 models are for use with in-line water filters. F indicates control valve with meter. T indicates control valve with timer. A complete model number example is "BNT 891F". BNT indicates control valve trade name for all world markets. [5] This product is Certified for a maximum use level of 0.05 units per L. [6] The 95 indicates the model of the valves and may be followed by either a 0 or a 1 and either an F or a T. The 0 models are for use with water softeners. The 1 models are for use with in-line water filters. F indicates control valve with meter. T indicates control valve with timer. A complete model number example is "BNT 951F". BNT indicates control valve trade name for all world markets. [7] This product is Certified for a maximum use level of 0.05 units per L. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
COMPONENTS: Valves, Control, Point-of-Entry [1] [8] [9] [Pb]
BNT1050(F)UF
BNT1050(F)DF
BNT1051T
BNT1050(T)DF
BNT1051F
BNT1050(T)UF
[1] Conforms to material and structural integrity requirements. [8] The 105 indicates the model of the valves and may be followed by either a 0 or a 1 and either an F or a T. The 0 models are for use with water softeners. The 1 models are for use with water filters. F indicates control valve with meter. T indicates control valve with timer. UF indicates up flow regeneration. DF indicates down flow regeneration. [9] This product is certified for a maximum use level of 0.09 units per L. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: These components do not bear the NSF Mark.  Evidence of Certification will appear on the
      manufacturer's literature and packaging.

Canature Health Technology Group.Co.,Ltd.
Chuanda Road 508&518, Pudong New Area
Shanghai
China
86 21 58599999

Facility : Anhui, China


COMPONENTS: Media, Cation Exchange Resin[1]
001x10
001x7
001x8
D113HFG
DURO-001×8NaFGFM
[1] Certified for the mesh sizes 16 - 50.

Changzhou Hydrooer Environmental Technology Co., Ltd.
#68 Shiche Village, Pangjia, Lijia Town
Wujin, Jiangsu 213164
China
86 519 8625 1788
Visit this company's website

Facility : # 2 China


COMPONENTS: Valves, Water Softener[1] [POE]
EZ4-FT
EZ4-SM
EZ5-FT
EZ5-SM
MZ4-FT
MZ4-SD
MZ4-SD-24
MZ4-ST
MZ5-FT
MZ5-SD
MZ5-SD-24
MZ5-ST
[1] Conforms to material and structural integrity requirements only. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

NOTE: These components do not bear the NSF Mark. Evidence of Certification will appear on the
      manufacturer's literature and packaging.

CHEMRA Shanghai International Trading Co. Ltd.
Room 673 Block B Hongqiao World Ctr
No. 698, Lane 1588, Zhu Guang Road
Qingpu, Shanghai 201702
China
86 215 988 0673
Visit this company's website

Facility : # 1 China


COMPONENTS: Media, Cation Exchange Resin
TREVERLITE IXC110[1] [2] [3]
TREVERLITE IXC210[1] [2] [3]
TREVERLITE IXC310[4]
TREVERLITE IXC330[4]
TREVERLITE XS105000[4]
[1] Conforms to the material requirements only. [2] This product is Certified for a maximum use level of 625 g/L. [3] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. [4] Certified for the following particle sizes 0.315 - 1.25 mm.

Clack Corporation
4462 Duraform Lane
Windsor, WI 53598-9716
United States
608-846-3010
Visit this company's website

Facility : Windsor, WI


COMPONENTS: Fittings[1] [Pb] [POE]
3/4" Brass Sweat Assembly LF - V3007-03LF[2]
3/4" John Guest QC Elbow Assembly - V3007-15[2]
3/4" John Guest QC Straight Assembly - V3007-19[2]
3/4" Plastic Male BSPT Assembly - V3007-14[2]
3/4" Plastic Male NPT Assembly - V3007-18[2]
3/4" Sharkbite® Assembly - V3007-12LF[2]
3/4" x 1" PVC Solvent Elbow Assembly - V3007-01[2]
1" Brass Sweat Assembly LF - V3007-02LF[2]
1" John Guest QC Elbow Assembly - V3007-20[2]
1" John Guest Straight QC Assembly - V3007-17[2]
1" Meter Assembly - V3039[2]
1" Meter Assembly - V3039-15[2]
1" Plastic Male BSPT Assembly - V3007-06[2]
1" Plastic Male NPT Assembly - V3007-04[2]
1" PVC Male BSPT Elbow Assembly - V3007-16[2]
1" PVC Male NPT Elbow Assembly - V3007[2]
1" Sharkbite® Assembly - V3007-13LF[2]
1.25" Plastic Male BSPT Assembly - V3007-08[2]
1.25" Plastic Male NPT Assembly - V3007-05[2]
1.25" & 1.5" Brass Sweat Assembly LF - V3007-09LF[2]
1.25" & 1.5" PVC Solvent Assembly - V3007-07[2]
Inline Vertical Adapter Fitting - V3467[2]
Vertical Adapter Assembly - V3191-01[2]
[1] Conforms to material and structural integrity requirements. [2] Certified for use with tanks 9 x 48 and greater. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Tanks, Water Softener[1] [Pb] [POE]
8 x 35
8 x 44
9 x 18
9 x 35
9 x 44 BTM PLT
9 x 48
9 x 48 BTM PLT
10 X 13
10 x 18
10 x 35
10 x 40
10 x 40 BTM PLT
10 x 44
10 x 44 BTM PLT
10 x 47
10 x 54
10 x 54 BTM & MID PLT
10 x 54 BTM PLT
10 x 54 DH BTM PLT
10 x 54 DH MID & BTM PLT
10 x 54 DOME HOLE
12 x 35
12 x 52
12 x 52 BTM & MID PLT
12 x 52 BTM PLT
12 x 52 DH BTM PLT
12 x 52 DH MID & BTM PLT
12 x 52 DOME HOLE
13 x 54
13 x 54 BTM & MID PLT
13 x 54 BTM PLT
13 x 54 DH BTM PLT
13 x 54 DH MID & BTM PLT
13 x 54 DOME HOLE
14 x 65
16 x 53
16 x 65
18 x 65
21 x 62
24 x 72
30 x 72
35 x 72
MCT120-C2253
RT40-C2250
RT80-C2251
RT120-C2252
[1] Conforms to material and structural integrity requirements. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Tubing[3] [Pb] [POE]
DPMT-0948
DPMT-0948-A
DPMT-1054
DPMT-1054-A
DPMT-1054-32MM
DPMT-1054-1320
DPMT-1252
DPMT-1252-A
DPMT-1252-32MM
DPMT-1252-1320
DPMT-1354
DPMT-1354-32MM
DPMT-1354-1320
DPMT-1354-A
[3] Certified for use with tanks 10 x 54 and greater. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Valves, Diverter, Point-of-Entry[1] [Pb] [POE]
1" Bypass Assembly - V3006[2]
1" Bypass Assembly - V3006-XX[2] [5]
1" Control Valve - WS1XX - V1AABCD-EFFGG[2] [4]
1" Twin Control Valve - TT1XX - VTT1AABCD-EFFGG[2] [4]
1" & 1.25" Motorized Alternating Valve - V3069MM-01[2]
1" & 1.25" Motorized Alternating Valve - V3069FF-01[2]
1" & 1.25" No Hard Water Bypass Valve - V3070FM[2]
1" & 1.25" No Hard Water Bypass Valve - V3070FF[2]
1.25" Control Valve - WS125XX - V125AABCD-EFFGG[2] [4]
1191 In-Out Head - D1400[2]
1191 In-Out Head w/ 1.320in Riser - D1400-03[2]
1190FP In-Out Head w/ Fill Port - D1220-01[2]
External In-Line Mixing Valve - V4099[2]
[1] Conforms to material and structural integrity requirements. [2] Certified for use with tanks 9 x 48 and greater. [4] V1AABCD-EFFGG, VTT1AABCD-EFFGG and V125AABCD-EFFGG where: AA - May be blank or any two digit letter code B - May be D (downflow, U (upflow), or B (backwash only) C - May be M (meter) or T (timer) D - May be A, A2, A3, B, C, D, E, F, G, H, I, J, K, or Z to indicate the injector installed E - May be blank or any letter code. If E or M then it includes a mixing valve FF - May be any number from 01 to 99. Indicates packaging or base variations GG - May be any two digit combination of letters. If blank, cover is black or if filled in indicates colored covers or special labels on the cover. [5] V3006-XX where XX may be 01, 02 or 04. Indicates handle color, handle direction or packaging. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Clack Corporation
4462 Duraform Lane
Windsor, WI 53598-9716
United States
608-846-3010

Facility : # 1 China


COMPONENTS: Tanks, Water Softener[1] [2] [Pb] [POE]
6x10, 2.5" Inlet
6x12, 2.5" Inlet
6x13, 2.5" Inlet
6x17, 2.5" Inlet
6x18, 2.5" Inlet
6x29, 2.5" Inlet
6x35, 2.5" Inlet
7x13, 2.5" Inlet
7x17, 2.5" Inlet
7x19, 2.5" Inlet
7x24, 2.5" Inlet
7x30, 2.5" Inlet
7x35, 2.5" Inlet
7x40, 2.5" Inlet
7x44, 2.5" Inlet
8x13, 2.5" Inlet
8x17, 2.5" Inlet
8x18, 2.5" Inlet
8x24, 2.5" Inlet
8x30, 2.5" Inlet
8x35, 2.5" Inlet
8x40, 2.5" Inlet
8x44, 2.5" Inlet
8x47, 2.5" Inlet
9x17, 2.5" Inlet
9x17, 2.5" x 2.5" Inlet
9x18, 2.5" Inlet
9x18, 2.5" x 2.5" Inlet
9x24, 2.5" Inlet
9x24, 2.5" x 2.5" Inlet
9x30, 2.5" Inlet
9x30, 2.5" x 2.5" Inlet
9x35, 2.5" Inlet
9x35, 2.5" x 2.5" Inlet
9x40, 2.5" Inlet
9x40, 2.5" x 2.5" Inlet
9x42, 2.5" Inlet
9x42, 2.5" x 2.5" Inlet
9x48, 2.5" Inlet
9x48, 2.5" x 2.5" Inlet
10x13, 2.5" Inlet
10x13, 2.5" x 2.5" Inlet
10x13, 4" Inlet
10x13, 4" x 2.5" Inlet
10x16, 2.5" Inlet
10x16, 2.5" x 2.5" Inlet
10x16, 4" Inlet
10x16, 4" x 2.5" Inlet
10x17, 2.5" Inlet
10x17, 2.5" x 2.5" Inlet
10x17, 4" Inlet
10x17, 4" x 2.5" Inlet
10x18, 2.5" Inlet
10x18, 2.5" x 2.5" Inlet
10x18, 4" Inlet
10x18, 4" x 2.5" Inlet
10x19, 2.5" Inlet
10x19, 2.5" x 2.5" Inlet
10x19, 4" Inlet
10x19, 4" x 2.5" Inlet
10x22, 2.5" Inlet
10x22, 2.5" x 2.5" Inlet
10x22, 4" Inlet
10x22, 4" x 2.5" Inlet
10x24, 2.5" Inlet
10x24, 2.5" x 2.5" Inlet
10x24, 4" Inlet
10x24, 4" x 2.5" Inlet
10x30, 2.5" Inlet
10x30, 2.5" x 2.5" Inlet
10x30, 4" Inlet
10x30, 4" x 2.5" Inlet
10x35, 2.5" Inlet
10x35, 2.5" x 2.5" Inlet
10x35, 4" Inlet
10x35, 4" x 2.5" Inlet
10x40, 2.5" Inlet
10x40, 2.5" x 2.5" Inlet
10x40, 4" Inlet
10x40, 4" x 2.5" Inlet
10x44, 2.5" Inlet
10x44, 2.5" x 2.5" Inlet
10x44, 4" Inlet
10x44, 4" x 2.5" Inlet
10x47, 2.5" Inlet
10x47, 2.5" x 2.5" Inlet
10x47, 4" Inlet
10x47, 4" x 2.5" Inlet
10x54, 2.5" Inlet
10x54, 2.5" x 2.5" Inlet
10x54, 4" Inlet
10x54, 4" x 2.5" Inlet
12x42, 2.5" Inlet
12x42, 4.5" Inlet
12x48, 2.5" Inlet
12x48, 2.5" x 2.5" Inlet
12x48, 4" Inlet
12x48, 4" x 2.5" Inlet
12x48, 4" x 4" Inlet
12x52, 2.5" Inlet
12x52, 2.5" x 2.5" Inlet
12x52, 4" Inlet
12x52, 4" x 2.5" Inlet
12x52, 4" x 4" Inlet
13x44, 2.5" Inlet
13x44, 2.5" x 2.5" Inlet
13x44, 4" Inlet
13x44, 4" x 2.5" Inlet
13x44, 4" x 4" Inlet
13x54, 2.5" Inlet
13x54, 2.5" x 2.5" Inlet
13x54, 4" Inlet
13x54, 4" x 2.5" Inlet
13x54, 4" x 4" Inlet
14x47, 2.5" Inlet
14x47, 2.5" x 2.5" Inlet
14x47, 4" Inlet
14x47, 4" x 2.5" Inlet
14x47, 4" x 4" Inlet
14x52, 2.5" Inlet
14x52, 2.5" x 2.5" Inlet
14x52, 4" Inlet
14x52, 4" x 2.5" Inlet
14x52, 4" x 4" Inlet
14x65, 2.5" Inlet
14x65, 2.5" x 2.5" Inlet
14x65, 4" Inlet
14x65, 4" x 2.5" Inlet
14x65, 4" x 4" Inlet
16x28, 2.5" Inlet
16x28, 2.5" x 2.5" Inlet
16x28, 4" Inlet
16x28, 4" x 2.5" Inlet
16x28, 4" x 4" Inlet
16x52, 2.5" Inlet
16x52, 2.5" x 2.5" Inlet
16x52, 4" Inlet
16x52, 4" x 2.5" Inlet
16x52, 4" x 4" Inlet
16x65, 2.5" Inlet
16x65, 2.5" x 2.5" Inlet
16x65, 4" Inlet
16x65, 4" x 2.5" Inlet
16x65, 4" x 4" Inlet
18x36, 4" Inlet
18x36, 4" x 4" Inlet
18x53, 4" Inlet
18x53, 4" x 4" Inlet
18x65, 4" Inlet
18x65, 4" x 4" Inlet
21x36, 4" Inlet
21x36, 4" x 4" Inlet
21x53, 4" Inlet
21x53, 4" x 4" Inlet
21x62, 4" Inlet
21x62, 4" x 4" Inlet
24x65, 4" Inlet
24x65, 4" x 4" Inlet
24x72, 4" Inlet
24x72, 4" x 4" Inlet
30x72, 4" Inlet
30x72, 4" x 4" Inlet
36x57, 4" Inlet
36x57, 4" x 4" Inlet
36x72, 4" Inlet
36x72, 4" x 4" Inlet
12x48, 4.5" Butress Inlet
12x52, 4.5" Butress Inlet
13x44, 4.5" Butress Inlet
13x54, 4.5" Butress Inlet
14x47, 4.5" Butress Inlet
14x52, 4.5" Butress Inlet
14x65, 4.5" Butress Inlet
16x28, 4.5" Butress Inlet
16x52, 4.5" Butress Inlet
16x65, 4.5" Butress Inlet
10x35, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x35, 4" x 2.5" Inlet 1.25" Dome Hole
10x40, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x40, 4" x 2.5" Inlet 1.25" Dome Hole
10x44, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x44, 4" x 2.5" Inlet 1.25" Dome Hole
10x47, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x47, 4" x 2.5" Inlet 1.25" Dome Hole
10x54, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x54, 4" x 2.5" Inlet 1.25" Dome Hole
12x48, 2.5" x 2.5" Inlet 1.25" Dome Hole
12x48, 4" x 2.5" Inlet 1.25" Dome Hole
12x52, 2.5" x 2.5" Inlet 1.25" Dome Hole
12x52, 4" x 2.5" Inlet 1.25" Dome Hole
13x44, 2.5" x 2.5" Inlet 1.25" Dome Hole
13x44, 4" x 2.5" Inlet 1.25" Dome Hole
13x54, 2.5" x 2.5" Inlet 1.25" Dome Hole
13x54, 4" x 2.5" Inlet 1.25" Dome Hole
14x47, 2.5" x 2.5" Inlet 1.25" Dome Hole
14x47, 4" x 2.5" Inlet 1.25" Dome Hole
14x52, 2.5" x 2.5" Inlet 1.25" Dome Hole
14x52, 4" x 2.5" Inlet 1.25" Dome Hole
14x65, 2.5" x 2.5" Inlet 1.25" Dome Hole
14x65, 4" x 2.5" Inlet 1.25" Dome Hole
16x28, 2.5" x 2.5" Inlet 1.25" Dome Hole
16x28, 4" x 2.5" Inlet 1.25" Dome Hole
16x52, 2.5" x 2.5" Inlet 1.25" Dome Hole
16x52, 4" x 2.5" Inlet 1.25" Dome Hole
16x65, 2.5" x 2.5" Inlet 1.25" Dome Hole
16x65, 4" x 2.5" Inlet 1.25" Dome Hole
18x65, 6" Flange
18x65, 6" x 6" Flange
21x62, 6" Flange
21x62, 6" x 6" Flange
24x65, 6" Flange
24x65, 6" x 6" Flange
24x72, 6" Flange
24x72, 6" x 6" Flange
30x72, 6" Flange
30x72, 6" x 6" Flange
36x57, 6" Flange
36x57, 6" x 6" Flange
36x72, 6" Flange
36x72, 6" x 6" Flange
42x72, 6" x 6" Flange
48x72, 6" x 6" Flange
63x67, 6" x 10" Flange
63x67, 6" x 6" Flange
63x86, 6" x 10" Flange
63x86, 6" x 6" Flange
[1] Conforms to material and structural integrity requirements. [2] The "x" in the trade name may be omitted. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Clack Corporation
4462 Duraform Lane
Windsor, WI 53598
United States
608-846-3010
Visit this company's website

Facility : # 1 USA


COMPONENTS: Tanks, Water Softener[1] [2] [Pb] [POE]
7x35, 2.5" Inlet
7x44, 2.5" Inlet
8x35, 2.5" Inlet
8x40, 2.5" Inlet
8x44, 2.5" Inlet
9x35, 2.5" Inlet
9x40, 2.5" Inlet
9x42, 2.5" Inlet
9x48, 2.5" Inlet
10x35, 2.5" Inlet
10x40, 2.5" Inlet
10x42, 2.5" Inlet
10x44, 2.5" Inlet
10x47, 2.5" Inlet
10x54, 2.5" Inlet
[1] Conforms to material and structural integrity requirements. [2] The "x" in the trade name may be omitted. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

EcoWater Systems LLC
P.O. Box 64420
St. Paul, MN 55164
United States
800-869-2837
Visit this company's website

Facility : Iuka, MS

Facility : Ripley, MS

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry [Pb] [POE]
ECR3700R20[1] [2]	9	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ECR3700R30[1] [2]	11	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ECR3702R30[1] [2]	11	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ECR3702R40[1] [2]	12	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ECR3702R50S[1] [2]	20	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ECR3702R70[1] [2]	12	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
EEC1502R25[1] [2]	6	Efficiency Rated[ER] Hardness Reduction[HR]
EEC1502R40[1] [2]	9.9	Efficiency Rated[ER] Hardness Reduction[HR]
ERR3700R20[1] [2]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ERR3702R30[1] [2]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ERR3702R50[1] [2]	10.9	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESD2750R25[1] [2]	6	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESD2752R30[1] [2]	7	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESD2752R39[1] [2]	7	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESD2800R25	6	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESD2802R30	7	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESD2802R39	7	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ESS1152XR32	8.3	Hardness Reduction[HR]
[1] Product also complies with NSF/ANSI 372. [2] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Tanks, Water Softener[3] [Pb] [POE]
7169457
7172638
[3] Conforms to the material and structural integrity requirements only. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Valves, Ball[Pb] [POE]
7376020
[Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
COMPONENTS: Valves, Water Softener[3] [Pb] [POE]
7244419
7244427
7244477
7245009
7245025
[3] Conforms to the material and structural integrity requirements only. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

EcoWater Systems LLC
P.O. Box 64420
St. Paul, MN 55164
United States
800-869-2837
651-739-5530
Visit this company's website

Facility : 1A China


COMPONENTS: Tanks, Water Softener[1] [Pb]
7391787
7391795
7391800
[1] Conforms to material and structural integrity requirements. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
COMPONENTS: Valves, Control, Point-of-Entry[1] [2] [Pb]
7393886
7393894
7393909
7393917
7393925
7393933
[1] Conforms to material and structural integrity requirements. [2] This product is certified for a maximum use level of 0.09 units per L. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Electrophor, Inc.
4750 NE13th Terrace
Oakland Park, FL 33334-4210
United States
914-693-1150
Visit this company's website

Facility : Narva, Estonia

Enpress LLC
Division of Polymer and Steel
Technologies Hldg. Co.
34899 Curtis Boulevard
Eastlake, OH 44095
United States
440-510-0108

Facility : Eastlake, OH


COMPONENTS: Tanks, Water Softener, Point-of-Entry[1] [2] [Pb] [POE]
EFG 10X16[3]
EFG 10X17[3]
EFG 10X18[3] [4]
EFG 10X19[3] [4]
EFG 10X22[3] [4]
EFG 10X23[3]
EFG 10X24[3] [4]
EFG 10X29[3]
EFG 10X30[3] [4]
EFG 10X32[4]
EFG 10X35[3] [4]
EFG 10X36[4]
EFG 10X40[3] [4]
EFG 10X44[3] [4]
EFG 10X47[3] [4]
EFG 10X54[3] [4]
EFG 10X55[3]
EFG 10X60[3]
EFG 10X65[3] [4]
EFG 12X29[3] [4] [5] [6] [7]
EFG 12X30[3] [4]
EFG 12X35[3]
EFG 12X36[3] [4] [6] [8]
EFG 12X40[3] [5]
EFG 12X42[3]
EFG 12X44[3] [4]
EFG 12X48[3] [4] [5] [6] [8]
EFG 12X51[3]
EFG 12X52[3] [4] [5] [6]
EFG 12X54[3]
EFG 12X60[3]
EFG 13X30[3] [4]
EFG 13X35[3] [4]
EFG 13X40[3]
EFG 13X44[3]
EFG 13X48[3] [4]
EFG 13X53[3]
EFG 13X54[3] [4]
EFG 13X55[3]
EFG 13X56[3]
EFG 13X65[3] [4]
EFG 13x36[3]
EFG 13x60[3]
EFG 14X30[3] [5] [6] [8]
EFG 14X40[3] [7]
EFG 14X47[3] [5] [6] [8]
EFG 14X52[7]
EFG 14X54[3] [4] [5]
EFG 14X65[3] [4] [5] [6] [7] [8]
EFG 14X72[3]
EFG 16X23[3] [8]
EFG 16X28[3]
EFG 16X36[3] [4] [5] [7]
EFG 16X40[4]
EFG 16X44[3] [5]
EFG 16X53[3] [5]
EFG 7X14[3] [4]
EFG 7X17[3]
EFG 7X18[3]
EFG 7X24[3]
EFG 7X29[3]
EFG 7X30[3]
EFG 7X35[3] [4]
EFG 7X40[3] [4]
EFG 7X44[3] [4]
EFG 8X17[3] [4]
EFG 8X18[3] [4]
EFG 8X20[4]
EFG 8X22[3] [4]
EFG 8X24[3] [4]
EFG 8X29[3]
EFG 8X30[3]
EFG 8X35[3]
EFG 8X40[3] [4]
EFG 8X42[4]
EFG 8X44[3] [4]
EFG 8X49[4]
EFG 9X15[3]
EFG 9X18[3] [4]
EFG 9X24[3] [4]
EFG 9X30[3] [4]
EFG 9X32[3]
EFG 9X35[3] [4]
EFG 9X40[3]
EFG 9X42[3]
EFG 9X44[3]
EFG 9X48[3] [4]
EFG 9X49[3]
EFG 9X54[3]
[1] Conforms to material and structural requirements only. [2] Standard Tanks: 7X14, 7X17, 7X18, 7X24, 7X29, 7X30, 7X35, 7X40, 7X44, 8X17, 8X18, 8X22, 8X24, 8X29, 8X30, 8X35, 8X40, 8X44, 9X15, 9X18, 9X24, 9X30, 9X32, 9X35, 9X40, 9X42, 9X44, 9X48, 9X49, 9X54, 10X13, 10X15, 10X16, 10X17, 10X18, 10X19, 10X22, 10X23, 10X24, 10X29, 10X30, 10X32 10X35, 10X40, 10X44, 10X47, 10X54, 10X55, 10X60, 10X65, 12X29, 12X30, 12X35, 12X36, 12X40, 12X42, 12X44, 12X48, 12X51, 12X52, 12X54, 13X30, 13X35, 13X36, 13X44, 13X48, 13X54, 13X55, 13X56, 13X60, 13X65, 14X30, 14X40, 14X47, 14X54, 14X65, 14X72, 16X23, 16X28, 16X36, 16X44, 16X53, 16X65, 21X62, 24X72 Tanks with a Top and Bottom Inlet: 7X14, 7X35, 7X40, 7X44, 8X17, 8X20, 8X22, 8X24, 8X40, 8X42, 8X44, 8X49, 9X18, 9X24, 9X35, 9X48, 10X18, 10X22, 10X24, 10X30, 10X35, 10X40, 10X44, 10X47, 10X54, 10X65, 12X29, 12X30, 12X36, 12X44, 12X48, 12X52, 13X30, 13X35, 13X48, 13X54, 13X65, 14X30, 14X40, 14X52, 14x65, 16x23, 16x36, 16x40, 16x53, 16x65 Tanks with Bottom Plates: 7X14, 7X17, 7X18, 7X24, 7X29, 7X30, 7X35, 7X40, 7X44, 8X17, 8X18, 8X20, 8X22, 8X24, 8X29, 8X30, 8X35, 8X40, 8X42, 8X44, 8X49, 9X15, 9X18, 9X24, 9X30, 9X32, 9X35, 9X40, 9X42, 9X44, 9X48, 9X49, 9X54, 10X13, 10X15, 10X16, 10X17, 10X18, 10X19, 10X22, 10X23, 10X24, 10X29, 10X30, 10X32, 10X35, 10X40, 10X44, 10X47, 10X54, 10X55, 10X60, 10X65, 12X29, 12X30, 12X35, 12X36, 12X40, 12X42, 12X44, 12X48, 12X51, 12X52, 12X54, 13X30, 13X35, 13X36, 13X44, 13X48, 13X54, 13X55, 13X56, 13X60, 13X65, 14X30, 14X40, 14X47, 14X52, 14X54, 14X65, 16X65, 14X72, 16X23, 16X28, 16X36, 16X40, 16X44, 16X53 Tanks with a Mid-Plate and Bottom Plate: 10X22, 10X23, 10X24, 10X29, 10X30, 10X32, 10X35, 10X40, 10X44, 10X47, 10X54, 10X55, 10X60, 10X65, 13X30, 13X35, 13X36, 13X44, 13X48, 13X54, 13X55, 13X56, 13X60, 13X65 Tanks with a Dome Hole: 10X16, 10X17, 10X18, 10X19, 10X22, 10X23, 10X24, 10X29, 10X30, 10X35, 10X40, 10X44, 10X47, 10X54, 10X55, 10X60, 10X65, 12X29, 12X30, 12X35, 12X36, 12X40, 12X42, 12X44, 12X48, 12X51, 12X52, 12X54, 13X30, 13X35, 13X36, 13X44, 13X48, 13X54, 13X55, 13X56, 13X60, 13X65 Tanks with a Dome Hole, Top Inlet, and Bottom Inlet: 10X18, 10X22, 10X24, 10X30, 10X35, 10X40, 10X44, 10X47, 10X54, 10X65, 12X29, 12X30, 12X36, 12X44, 12X48, 12X52, 13X30, 13X35, 13X48, 13X54, 13X65 Tanks with a Dome Hole and Bottom Plate: 10X16, 10X17, 10X18, 10X19, 10X22, 10X23, 10X24, 10X29, 10X30, 10X32, 10X35, 10X40, 10X44, 10X47, 10X54, 10X55, 10X60, 10X65, 12X29, 12X30, 12X35, 12X36, 12X40, 12X42, 12X44, 12X48, 12X51, 12X52, 12X54, 13X30, 13X35, 13X36, 13X44, 13X48, 13X54, 13X55, 13X56, 13X60, 13X65 [3] 2.5" Single Inlet Tank: 7x14, 7x17, 7x18, 7x24, 7x29, 7x30, 7x35, 7x40, 7x44, 8x17, 8x18, 8x22, 8x24, 8x29, 8x30, 8x35, 8x40, 8x44, 9x15, 9x18, 9x24, 9x30, 9x32, 9x35, 9x40, 9x42, 9x44, 9x48, 9x49, 9x54, 10x16, 10x17, 10x18, 10x19, 10x22, 10x23, 12x29, 12x30, 12x35, 12x36, 12x40, 12x42, 12x44, 12x48, 12x51, 12x52, 12x54, 12x60, 13x40, 13x53, 14x30, 14x40, 14x47, 14x54, 14x65, 14x72, 16x23, 16x28, 16x36, 16x44, 16x53, 16x65 [4] 2.5" x 2.5" Dual Inlet: 7x14, 7x35, 7x40, 7x44, 8x17, 8x18, 8x20, 8x22, 8x24, 8x40, 8x42, 8x44, 8x49, 9x18, 9x24, 9x30, 9x35, 9x48, 10x18, 10x19, 10x22, 10x24, 10x30, 10x32, 10x35, 10x36, 10x40, 10x44, 10x47, 10x54, 10x65, 12x29, 12x30, 12x36, 12x44, 12x48, 12x52, 13x30, 13x35, 13x48, 13x54, 13x65, 14x54, 14x65, 16x36, 16x40, 16x53, 16x65 [5] 4" Single Inlet Tank: 12x29, 12x40, 12x48, 12x52, 14x30, 14x47, 14x54, 14x65, 16x36, 16x44, 16x53, 16x65 [6] 4.5" Single Inlet Tank: 12x29, 12x36, 12x48, 12x52, 14x30, 14x47, 14x65 [7] 2.5" x 4" Dual Tanks: 12x29, 14x40, 14x52, 14x65, 16x36 [8] 4" x 4" Dual Inlet Tanks: 12x36, 12x48, 14x30, 14x47, 14x65, 16x23, 16x65 [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Everpure LLC
1040 Muirfield Drive
Hanover Park, IL 60133
United States
800-323-7873
Visit this company's website

Facility : Buena Park, CA

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Plumbed-In[1] [Pb]
CES-5600E-15	3	Efficiency Rated[ER] Hardness Reduction[HR]
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Point-of-Entry[1] [POE]
CES-9100E-24[Pb]	8	Efficiency Rated[ER] Hardness Reduction[HR]
CES-9100TS E-30C[Pb]	7.9	Efficiency Rated[ER] Hardness Reduction[HR]
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Facility : Mukwonago, WI

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Plumbed-In[1] [Pb]
CES-5600E-15	3	Efficiency Rated[ER] Hardness Reduction[HR]
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Point-of-Entry[1] [POE]
CES-9100E-24[Pb]	8	Efficiency Rated[ER] Hardness Reduction[HR]
CES-9100TS E-30C[Pb]	7.9	Efficiency Rated[ER] Hardness Reduction[HR]
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI 61 health effects requirements.

Extrepure Resin (Shanghai) Co., Ltd.
Unit 726, No. 56
Lane 846, Xin Yu Road
Shanghai 200020
China
86 21 6910 6533
Visit this company's website

Facility : # 2 China


COMPONENTS: Media, Cation Exchange Resin[1]
001×10NAFG
001×7NAFG
001×8NAFG
D113HFG
[1] Certified for the mesh sizes 16-50.

Franklin Water Treatment Canada, Inc.
Unit 5 - 200 Discovery Place
Winnipeg, MB R2R 0P7
Canada
204-786-1604

Facility : # 2 China


COMPONENTS: Tanks, Water Softener[1]
WC817EX
WC835EX
WC844EX
WC942EX
WC948EX
WC1035EX
WC1044EX
WC1047EX
WC1054EX
WC1248EX
WC1252EX
WC1354EX
WC1465EX
WC1465EX4
WC1665EX
WC1865EX
WC2162EX
WC2472EX
WC3072EX
WC3072EXF2
WC3672EX
WC3672EXF2
WC4272EXF2
WC4872EXF2
WC6367EXF2
WC6386EXF2
[1] X - Color N - Natural BL - Black G - Grey

Franklin Water Treatment Canada, Inc.
Unit 5 - 200 Discovery Place
Winnipeg, MB R2R 0P7
Canada
204-786-1604

Facility : # 1 China


COMPONENTS: Tanks, Water Softener[1] [2] [3] [Pb] [POE]
WC817EX
WC835EX
WC844EX
WC918EX2
WC942EX
WC948EX
WC1035EX
WC1044EX
WC1047EX
WC1054EX
WC1248EX
WC1252EX
WC1354EX
WC1465EX
WC1465EX4
WC1665EX
WC1865EX
WC2162EX
WC2472EX
WC2472EXF
WC2472EXF2
WC3072EX
WC3072EXF
WC3072EXF2
WC3672EX
WC3672EXF
WC3672EXF2
WC4272EXF2
WC4872EXF2
WC6367EXF2
WC6386EXF2
[1] X - Color N - Natural BL - Black G - Grey [2] Conforms to material and structural integrity requirements. [3] The "x" in the trade name may be omitted. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Function International Public Company Limited
313 Charoen Phatthana Road
Bangchan, Khlong Sam Wa
Bangkok 10510
Thailand
66 2540 6263
Visit this company's website

Facility : # 1 China


COMPONENTS: Tanks, Water Softener[1] [Pb]
FIBERTEK FRP 10X35 (2.5") FIBERTEK LABEL
FIBERTEK FRP 10X44 (2.5") FIBERTEK LABEL
FIBERTEK FRP 10X54 (2.5") FIBERTEK LABEL
FIBERTEK FRP 12X48 (2.5") FIBERTEK LABEL
FIBERTEK FRP 12X52 (2.5") FIBERTEK LABEL
FIBERTEK FRP 13X54 (2.5") FIBERTEK LABEL
FIBERTEK FRP 14X65 (2.5") FIBERTEK LABEL
FIBERTEK FRP 16X65 (2.5") FIBERTEK LABEL
FIBERTEK FRP 18X65 (4") FIBERTEK LABEL
FIBERTEK FRP 21X62 (4") FIBERTEK LABEL
FIBERTEK FRP 21X62 (4"x4") FIBERTEK LABEL
FIBERTEK FRP 24X72 (4") FIBERTEK LABEL
FIBERTEK FRP 24X72 (4"x4") FIBERTEK LABEL
FIBERTEK FRP 7X35 (2.5") FIBERTEK LABEL
FIBERTEK FRP 8X35 (2.5") FIBERTEK LABEL
FIBERTEK FRP 8X44 (2.5") FIBERTEK LABEL
FRP 10×35(2.5")GREY AQUATEK LABEL
FRP 10×44(2.5")GREY AQUATEK LABEL
FRP 10×54(2.5")GREY AQUATEK LABEL
FRP 12×48(2.5")GREY AQUATEK LABEL
FRP 12×52(2.5")GREY AQUATEK LABEL
FRP 13×54(2.5")GREY AQUATEK LABEL
FRP 14×65(2.5")GREY AQUATEK LABEL
FRP 16×65(2.5")GREY AQUATEK LABEL
FRP 18×65(4")GREY AQUATEK LABEL
FRP 21×62(4")GREY AQUATEK LABEL
FRP 21×62(4"×4")GREY AQUATEK LABEL
FRP 24×72(4")GREY AQUATEK LABEL
FRP 24×72(4"×4")GREY AQUATEK LABEL
FRP 7×35(2.5")GREY AQUATEK LABEL
FRP 8×35(2.5")GREY AQUATEK LABEL
FRP 8×44(2.5")GREY AQUATEK LABEL
HYDROMAX FRP 10X35 (2.5") HYDROMAX LABEL
HYDROMAX FRP 10X44 (2.5") HYDROMAX LABEL
HYDROMAX FRP 10X54 (2.5") HYDROMAX LABEL
HYDROMAX FRP 12X48 (2.5") HYDROMAX LABEL
HYDROMAX FRP 12X52 (2.5") HYDROMAX LABEL
HYDROMAX FRP 13X54 (2.5") HYDROMAX LABEL
HYDROMAX FRP 14X65 (2.5") HYDROMAX LABEL
HYDROMAX FRP 16X65 (2.5") HYDROMAX LABEL
HYDROMAX FRP 18X65 (4") HYDROMAX LABEL
HYDROMAX FRP 21X62 (4") HYDROMAX LABEL
HYDROMAX FRP 21X62 (4"x4") HYDROMAX LABEL
HYDROMAX FRP 24X72 (4") HYDROMAX LABEL
HYDROMAX FRP 24X72 (4"x4") HYDROMAX LABEL
HYDROMAX FRP 7X35 (2.5") HYDROMAX LABEL
HYDROMAX FRP 8X35 (2.5") HYDROMAX LABEL
HYDROMAX FRP 8X44 (2.5") HYDROMAX LABEL
STAR PURE FRP 10X35 (2.5") STAR PURE LABEL
STAR PURE FRP 10X44 (2.5") STAR PURE LABEL
STAR PURE FRP 10X54 (2.5") STAR PURE LABEL
STAR PURE FRP 12X48 (2.5") STAR PURE LABEL
STAR PURE FRP 12X52 (2.5") STAR PURE LABEL
STAR PURE FRP 13X54 (2.5") STAR PURE LABEL
STAR PURE FRP 14X65 (2.5") STAR PURE LABEL
STAR PURE FRP 16X65 (2.5") STAR PURE LABEL
STAR PURE FRP 18X65 (4") STAR PURE LABEL
STAR PURE FRP 21X62 (4") STAR PURE LABEL
STAR PURE FRP 21X62 (4"x4") STAR PURE LABEL
STAR PURE FRP 24X72 (4") STAR PURE LABEL
STAR PURE FRP 24X72 (4"x4") STAR PURE LABEL
STAR PURE FRP 7X35 (2.5") SC5:C20PURE LABEL
STAR PURE FRP 8X35 (2.5") STAR PURE LABEL
STAR PURE FRP 8X44 (2.5") STAR PURE LABEL
TREATTON FRP 10X35 (2.5") TREATTON LABEL
TREATTON FRP 10X44 (2.5") TREATTON LABEL
TREATTON FRP 10X54 (2.5") TREATTON LABEL
TREATTON FRP 12X48 (2.5") TREATTON LABEL
TREATTON FRP 12X52 (2.5") TREATTON LABEL
TREATTON FRP 13X54 (2.5") TREATTON LABEL
TREATTON FRP 14X65 (2.5") TREATTON LABEL
TREATTON FRP 16X65 (2.5") TREATTON LABEL
TREATTON FRP 18X65 (4") TREATTON LABEL
TREATTON FRP 21X62 (4") TREATTON LABEL
TREATTON FRP 21X62 (4"x4") TREATTON LABEL
TREATTON FRP 24X72 (4") TREATTON LABEL
TREATTON FRP 24X72 (4"x4") TREATTON LABEL
TREATTON FRP 7X35 (2.5") TREATTON LABEL
TREATTON FRP 8X35 (2.5") TREATTON LABEL
TREATTON FRP 8X44 (2.5") TREATTON LABEL
WATER STORE FRP 10X35 (2.5") WATER STORE LABEL
WATER STORE FRP 10X44 (2.5") WATER STORE LABEL
WATER STORE FRP 10X54 (2.5") WATER STORE LABEL
WATER STORE FRP 12X48 (2.5") WATER STORE LABEL
WATER STORE FRP 12X52 (2.5") WATER STORE LABEL
WATER STORE FRP 13X54 (2.5") WATER STORE LABEL
WATER STORE FRP 14X65 (2.5") WATER STORE LABEL
WATER STORE FRP 16X65 (2.5") WATER STORE LABEL
WATER STORE FRP 18X65 (4") WATER STORE LABEL
WATER STORE FRP 21X62 (4") WATER STORE LABEL
WATER STORE FRP 21X62 (4"x4") WATER STORE LABEL
WATER STORE FRP 24X72 (4") WATER STORE LABEL
WATER STORE FRP 24X72 (4"x4") WATER STORE LABEL
WATER STORE FRP 7X35 (2.5") WATER STORE LABEL
WATER STORE FRP 8X35 (2.5") WATER STORE LABEL
WATER STORE FRP 8X44 (2.5") WATER STORE LABEL
[1] Conforms to material and structural integrity requirements. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Function International Public Company Limited
313 Charoen Phatthana Rd
Bang Chan, Khlong Sam Wa
Bangkok 10510
Thailand
66 2540 6263

Facility : Ningbo, Zhejiang, China


COMPONENTS: Media, Cation Exchange Resin[1] [2]
AQUATEK AQC 107 FD
HYDROMAX HMC 107 FD
PALL TECH PTC-107 FD
STAR PURE SPC 107 FD
[1] Certified for a maximum use level of 80 g/L. [2] PALL TECH PTC-107 FD, AQUATEK AQC 107 FD, STAR PURE SPC 107 FD, and HYDROMAX HMC 107 FD are certified for the following sizes: 0.315 - 1.25 mm.

GE Appliances, a Haier Company
Appliance Park
AP2-120
Louisville, KY 40225
United States
800-952-5039
502-452-5435

Facility : Ripley, MS

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry[1] [Pb] [POE]
GXMH31H[2]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
GXSF30V[2]	7.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
GXSH40V[2]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
GXSH45V[2]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
GXSHC40N[2]	9.5	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
[1] Product also complies with NSF/ANSI 372. [2] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI 61 health effects requirements.

General Technologies, SPC
2016 E Spruce Circle
Olathe, KS 66062
United States
913-766-5566

Facility : # 1 China


COMPONENTS: Media, Cation Exchange Resin[1]
C107DQ Strong Acid Cation Resin[2]
C108DQ Strong Acid Cation Resin[2]
C108UPDQ Strong Acid Cation Resin[3]
C110DQ Strong Acid Cation Resin[2]
C258DQ weak Acid Cation Resin[2]
C258DQHC weak Acid Cation Resin[2]
[1] Certified for a maximum use level of 80 g/L. [2] C107DQ Strong Acid Cation Resin,C108DQ Strong Acid Cation Resin, C258DQHC Weak Acid Caton Resin, C258DQ Weak Acid Cation Resin are certified for the following sizes: 0.315 - 1.25 mm.C110DQ Strong Acid Cation Resin is certified for 16-50 mesh. [3] C108UPDQ Strong Acid Cation Resin is certified for the following sizes: 0.2-0.45mm

Global Aqua Technology
13963 Ramona Avenue
Suite E
Chino, CA 91710
United States
86 215 732 5533

Facility : 2A

Global Aqua Technology
13963 Ramona Avenue
Suite E
Chino, CA 91710
United States
626-333-3336
Visit this company's website

Facility : 3A


COMPONENTS: Tanks, Water Softener[1] [2] [Pb] [POE]
FLT-0610XX-25T
FLT-0612XX-25T
FLT-0613XX-25T
FLT-0617XX-25T
FLT-0618XX-25T
FLT-0629XX-25T
FLT-0635XX-25T
FLT-0713XX-25T
FLT-0717XX-25T
FLT-0719XX-25T
FLT-0724XX-25T
FLT-0730XX-25T
FLT-0735XX-25T
FLT-0740XX-25T
FLT-0744XX-25T
FLT-0813XX-25T
FLT-0813XX-25T25B
FLT-0817XX-25T
FLT-0817XX-25T25B
FLT-0818XX-25T
FLT-0818XX-25T25B
FLT-0824XX-25T
FLT-0824XX-25T25B
FLT-0830XX-25T
FLT-0830XX-25T25B
FLT-0835XX-25T
FLT-0835XX-25T25B
FLT-0840XX-25T
FLT-0840XX-25T25B
FLT-0844XX-25T
FLT-0844XX-25T25B
FLT-0847XX-25T
FLT-0913XX-25T
FLT-0916XX-25T
FLT-0917XX-25T
FLT-0917XX-25T25B
FLT-0918XX-25T
FLT-0918XX-25T25B
FLT-0922XX-25T
FLT-0924XX-25T
FLT-0924XX-25T25B
FLT-0930XX-25T
FLT-0930XX-25T25B
FLT-0932XX-25T
FLT-0935XX-25T
FLT-0935XX-25T25B
FLT-0940XX-25T
FLT-0940XX-25T25B
FLT-0942XX-25T
FLT-0942XX-25T25B
FLT-0948XX-25T
FLT-0948XX-25T25B
FLT-1013XX-25T
FLT-1013XX-25T25B
FLT-1013XX-4T
FLT-1013XX-4T25B
FLT-1016XX-25T
FLT-1016XX-25T25B
FLT-1016XX-4T
FLT-1016XX-4T25B
FLT-1017XX-25T
FLT-1017XX-25T25B
FLT-1017XX-4T
FLT-1017XX-4T25B
FLT-1018XX-25T
FLT-1018XX-25T25B
FLT-1018XX-4T
FLT-1018XX-4T25B
FLT-1019XX-25T
FLT-1019XX-25T25B
FLT-1019XX-4T
FLT-1019XX-4T25B
FLT-1022XX-25T
FLT-1022XX-25T25B
FLT-1022XX-4T
FLT-1022XX-4T25B
FLT-1024XX-25T
FLT-1024XX-25T25B
FLT-1024XX-4T
FLT-1024XX-4T25B
FLT-1030XX-25T
FLT-1030XX-25T25B
FLT-1030XX-4T
FLT-1030XX-4T25B
FLT-1032XX-25T
FLT-1035XX-25T
FLT-1035XX-25T25B
FLT-1035XX-4T
FLT-1035XX-4T25B
FLT-1040XX-25T
FLT-1040XX-25T25B
FLT-1040XX-4T
FLT-1040XX-4T25B
FLT-1044XX-25T
FLT-1044XX-25T25B
FLT-1044XX-4T
FLT-1044XX-4T25B
FLT-1047XX-25T
FLT-1047XX-25T25B
FLT-1047XX-3T
FLT-1047XX-4T
FLT-1047XX-4T25B
FLT-1054XX-25T
FLT-1054XX-3T
FLT-1054XX-4T
FLT-1054XX-25T25B
FLT-1054XX-4T25B
FLT-1236XX-25T
FLT-1236XX-45T
FLT-1242XX-25T
FLT-1242XX-45T
FLT-1248XX-25T
FLT-1248XX-4T
FLT-1248XX-25T25B
FLT-1248XX-4T25B
FLT-1248XX-4T4B
FLT-1252XX-25T
FLT-1252XX-25T25B
FLT-1252XX-4T
FLT-1252XX-4T25B
FLT-1252XX-4T4B
FLT-1335XX-4T
FLT-1344XX-25T
FLT-1344XX-25T25B
FLT-1344XX-4T
FLT-1344XX-4T25B
FLT-1344XX-4T4B
FLT-1354XX-25T
FLT-1354XX-25T25B
FLT-1354XX-4T
FLT-1354XX-4T25B
FLT-1354XX-4T4B
FLT-1447XX-25T
FLT-1447XX-25T25B
FLT-1447XX-4T
FLT-1447XX-4T25B
FLT-1447XX-4T4B
FLT-1452XX-25T
FLT-1452XX-25T25B
FLT-1452XX-4T
FLT-1452XX-4T25B
FLT-1452XX-4T4B
FLT-1465XX-25T
FLT-1465XX-25T25B
FLT-1465XX-4T
FLT-1465XX-4T25B
FLT-1465XX-4T4B
FLT-1465XX-4T25B
FLT-1465XX-4T4B
FLT-1628XX-25T
FLT-1628XX-25T25B
FLT-1628XX-4T
FLT-1628XX-4T25B
FLT-1628XX-4T4B
FLT-1640XX-45T
FLT-1652XX-25T
FLT-1652XX-25T25B
FLT-1652XX-4T
FLT-1652XX-4T25B
FLT-1652XX-4T4B
FLT-1653XX-45T
FLT-1655XX-4T
FLT-1665XX-25T
FLT-1665XX-25T25B
FLT-1665XX-25T25B
FLT-1665XX-4T
FLT-1665XX-4T25B
FLT-1665XX-4T4B
FLT-1836XX-4T
FLT-1836XX-4T4B
FLT-1853XX-4T
FLT-1853XX-4T4B
FLT-1865XX-4T
FLT-1865XX-4T4B
FLT-2136XX-4T
FLT-2136XX-4T
FLT-2153XX-4T
FLT-2153XX-4T4B
FLT-2153XX-45T45B
FLT-2162XX-4T
FLT-2162XX-4T4B
FLT-2465XX-4T
FLT-2465XX-4T4B
FLT-2472XX-4T
FLT-2472XX-4T4B
FLT-3072XX-4T
FLT-3072XX-4T4B
FLT-3657XX-4T
FLT-3657XX-4T4B
FLT-3663XX-6T6B
FLT-3672XX-4T
FLT-3672XX-4T4B
FLT-2162XX-6T
FLT-2162XX-6T6B
FLT-2465XX-6T
FLT-2465XX-6T6B
FLT-2472XX-6T
FLT-2472XX-6T6B
FLT-3072XX-6T
FLT-3072XX-6T6B
FLT-3657XX-6T
FLT-3657XX-6T6B
FLT-3663XX-6T6B
FLT-3672XX-6T
FLT-3672XX-6T6B
FLT-4251XX-6T6B
FLT-4263XX-6T6B
FLT-4266XX-6T6B
FLT-4272XX-6T6B
FLT-4872XX-6T6B
FLT-6367XX-6T10B
FLT-6367XX-6T6B
FLT-6386XX-6T10B
FLT-6386XX-6T6B
[1] Conforms to material and structural integrity requirements. [2] XX - FRP Tank color BL - Blue BK - Black NA - Natural [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Global Aqua Technology
13963 Ramona Avenue
Suite E
Chino, CA 91710
United States
626-333-3336

Facility : # 2A


COMPONENTS: Media, Cation Exchange Resin
ION-MS+
ION-S+
ION-SB+
ION-XS+
ION-XSB+

Global Aqua Technology
13963 Ramona Avenue
Chino, CA CA 91710
United States
626-333-3336

Facility : 2A

Hankscraft Inc.
300 Wengel Drive
P.O. Box 190
Reedsburg, WI 53959
United States
608-524-4341
Visit this company's website

Facility : # 2 China


COMPONENTS: Valves, Water Softener[1] [POE]
HD-FTC
HD-SMM
HDL-FTC
HDL-SMM
HL-FTC
HL-SMM
HL-SMM-24
HL-STC
HS-FTC
HS-SMM
HS-SMM-24
HS-STC
[1] Conforms to material and structural integrity requirements only. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

NOTE: These components do not bear the NSF Mark.  Evidence of Certification will appear on the
      manufacturer's literature and packaging.

Hankscraft Inc.
300 Wengel Drive
Reedsburg, WI 53959
United States
608-524-4341
Visit this company's website

Facility : R China


COMPONENTS: Valves, Water Softener[1]
RevV2[2]
RevV3[3]
RevV4[4]
RevV4/41204[4]
[1] Conforms to material and structural integrity requirements only. [2] Certified for use with tank sizes 8 x 17 and larger. The product is Certified for a maximum use level of 0.21 units per L. [3] Certified for use with tank sizes 7 x 44 and larger. [4] Certified for use with tank sizes 10 x 54 and larger.

Hebei Chengda Water Technology Co., Ltd.
N0. 19 Chuangye Rd., SME Pioneer Park
Zaoqiang County, Hengshui City
Hebei Province 053100
China
86 318 828 7859
Visit this company's website

Facility : Hebei Province, China

Hebi Higer Chemical Technology Co., Ltd.
Jijiashan Industrial Park
Hebi City, Henan Province
458000
China
86 392 256 8888

Facility : Henan Province, China


COMPONENTS: Media, Cation Exchange Resin[1]
C007BFG[2]
C007CFG[3]
C007FG[4]
C008BFG[2]
C008CFG[3]
C008FG[4]
C009FG[4]
C010FG[4]
C011FG[4]
C012FG[4]
C013FG[4]
C016FG[4]
[1] Certified for a maximum use level of 800 g/L. [2] Certified for the following sizes: 0.5 - 1.25 mm [3] Certified for the following sizes: 0.45 - 1.25 mm. [4] Certified for the following sizes: 0.315 - 1.25 mm.

Hidro-Water S.L.
Ctra. Chirivella-Aldaya No. 48
46960 Aldaya (Valencia)
Spain
34 96 198 62 30
Visit this company's website

Facility : # 1 China

Jiangsu Pengyu FRP Pressure Vessel Co., Ltd.
Qianhuang Industrial Zone
Qianhuang Town, Changzhou 213172
China
86 519 8625 4615

Facility : Changzhou, China


COMPONENTS: Tanks, Water Softener[1] [Pb]
Pressure vessel 1054
Pressure vessel 1252
Pressure vessel 1354
Pressure vessel 1465
Pressure vessel 1665
Pressure vessel 844
Pressure vessel 948
[1] Conforms to material and structural integrity requirements. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Jiangsu Suqing Water Treatment Engineering Group Co., Ltd.
No. 89 Changqing Road, Hetang
Changjing Town, Jiangyin, Jiangsu 214419
China
86 510 8633 2199
Visit this company's website

Facility : Jiangsu, China


COMPONENTS: Media, Cation Exchange Resin
001X7Na FG[1] [2] [3]
001X8Na FG[1] [2] [3]
D001Na FG[1] [2] [3]
D113 FG[4]
[1] Conforms to the material requirements only. [2] This product is Certified for a maximum use level of 625 g/L. [3] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. [4] Certified for the following particle sizes 0.315 - 1.25 mm.

Liter Importação e Comércio
234 Osvaldo Cruz Street
Timbo, Santa Catarina
89120000
Brazil
55 47 4102 0306
Visit this company's website

Facility : Factory 1A


COMPONENTS: Tanks, Water Softener[1]
Toruz 6×13, 2.5" -8NPSM
Toruz 6×17, 2.5" -8NPSM
Toruz 6×18, 2.5" -8NPSM
Toruz 6×35, 2.5" -8NPSM
Toruz 7×13, 2.5" -8NPSM
Toruz 7×17, 2.5" -8NPSM
Toruz 7×24, 2.5" -8NPSM
Toruz 7×30, 2.5" -8NPSM
Toruz 7×35, 2.5" -8NPSM
Toruz 7×44, 2.5" -8NPSM
Toruz 8×13, 2.5" -8NPSM
Toruz 8×17, 2.5" -8NPSM
Toruz 8×19, 2.5" -8NPSM
Toruz 8×24, 2.5" -8NPSM
Toruz 8×30, 2.5" -8NPSM
Toruz 8×35, 2.5" -8NPSM
Toruz 8×44, 2.5" -8NPSM
Toruz 9×17, 2.5" -8NPSM
Toruz 9×30, 2.5" -8NPSM
Toruz 9×35, 2.5" -8NPSM
Toruz 9×42, 2.5" -8NPSM
Toruz 9×48, 2.5" -8NPSM
Toruz 10×17, 2.5" -8NPSM
Toruz 10×19, 2.5" -8NPSM
Toruz 10×24, 2.5" -8NPSM
Toruz 10×30, 2.5" -8NPSM
Toruz 10×35, 2.5" -8NPSM
Toruz 10×44, 2.5" -8NPSM
Toruz 10×47, 2.6" -8NPSM
Toruz 10×54, 2.5" -8NPSM
Toruz 10×54, 4" -8UN
Toruz 12×48, 2.5" -8NPSM
Toruz 12×52, 2.5" -8NPSM
Toruz 13×44, 2.5" -8NPSM
Toruz 13×54, 2.5" -8NPSM
Toruz 13×54, 4" -8UN
Toruz 14×47, 2.5" -8NPSM
Toruz 14×47, 4" -8UN
Toruz 14×52, 2.5" -8NPSM
Toruz 14×52, 4" -8UN
Toruz 14×65, 2.5" -8NPSM
Toruz 14×65, 4" -8UN
Toruz 14×65, 4"×4" -8UN
Toruz 16×52, 2.5" -8NPSM
Toruz 16×52, 4" -8UN
Toruz 16×65, 2.5" -8NPSM
Toruz 16×65, 4" -8UN
Toruz 16×65, 4"×4" -8UN
Toruz 18×36, 4" -8UN
Toruz 18×53, 4" -8UN
Toruz 18×65, 4" -8UN
Toruz 18×65, 4"x4" -8UN
Toruz 21×36, 4" -8UN
Toruz 21×53, 4" -8UN
Toruz 21×62, 4"- 8UN
Toruz 21×62, 4"x4" -8UN
Toruz 24×72, 4" -8UN
Toruz 24×72, 4"x4" -8UN
Toruz 30×72, 4" -8UN
Toruz 30×72, 4"x4" -8UN
Toruz 30×72, 6"x6" FLG
Toruz 36×72, 4" -8UN
Toruz 36×72, 4"x4" -8UN
Toruz 36×72, 6"x 6" FLG
Toruz 42×72, 6"x 6" FLG
Toruz 48×72, 6"x 6" FLG
Toruz 63×67, 6"x 6" FLG
Toruz 63×86, 6"x 6" FLG
[1] Conforms to the material and structural integrity requirements.

Mazuma (Thailand) Co., Ltd.
747/96 Bangkok-Nonthaburi Road, Bangsue
Bangsue, Bangkok 10800
Thailand
66 2 977 6700
Visit this company's website

Facility : Anhui, China

Ningbo Keman Environmental Technology Co., Ltd
Weijia Village Moushan Town
Yuyao City, Zhejiang Province
315456
China
86 574 62497208

Facility : Zhejiang, China

Ningbo Zhengguang Resin Co., Ltd.
No. 6 Niluoshan Road
Ningbo Petrochemical Development Zone
Ningbo, Zhejiang 315204
China
86 571 8637 2141

Facility : Ningbo, Zhejiang, China


COMPONENTS: Media, Cation Exchange Resin[1]
ZGC107DQ Strong Acid Cation Resin[2]
ZGC108DQ Strong Acid Cation Resin[2]
ZGC108FMDQ Strong Acid Cation Resin[3]
ZGC110DQ Strong Acid Cation Resin[2]
ZGC258FD HC Weak Acid Cation Resin[4]
ZGC258FD Weak Acid Cation Resin[4]
[1] Certified for a maximum use level of 80 g/L. [2] ZGC107DQ Strong Acid Cation Resin, ZGC110DQ Strong Acid Cation Resin, and ZGC108DQ Strong Acid Cation Resin are certified for the following sizes: 0.315 - 1.25 mm. [3] ZGC108FMDQ Strong Acid Cation Resin is certified for the following sizes: 0.2 - 0.45 mm. [4] Certified for the following sizes: 0.315 - 1.25 mm.

Noyi Environmental Equipment Manufacturing (Beijing) Co., Ltd.
No.1, Block 1, Yukou Industrial Zone
Pinggu District
Beijing 101206
China
86 106 190 2887
Visit this company's website

Facility : Beijing City, China


COMPONENTS: Tanks, Water Softener[1]
6×13, 2.5" -8NPSM
6×17, 2.5" -8NPSM
6×18, 2.5" -8NPSM
6×35, 2.5" -8NPSM
7×13, 2.5" -8NPSM
7×17, 2.5" -8NPSM
7×24, 2.5" -8NPSM
7×30, 2.5" -8NPSM
7×35, 2.5" -8NPSM
7×44, 2.5" -8NPSM
8×13, 2.5" -8NPSM
8×17, 2.5" -8NPSM
8×19, 2.5" -8NPSM
8×24, 2.5" -8NPSM
8×30, 2.5" -8NPSM
8×35, 2.5" -8NPSM
8×44, 2.5" -8NPSM
9×17, 2.5" -8NPSM
9×30, 2.5" -8NPSM
9×35, 2.5" -8NPSM
9×42, 2.5" -8NPSM
9×48, 2.5" -8NPSM
10×17, 2.5" -8NPSM
10×19, 2.5" -8NPSM
10×24, 2.5" -8NPSM
10×30, 2.5" -8NPSM
10×35, 2.5" -8NPSM
10×44, 2.5" -8NPSM
10×47, 2.6" -8NPSM
10×54, 2.5" -8NPSM
10×54, 4" -8UN
12×48, 2.5" -8NPSM
12×52, 2.5" -8NPSM
13×44, 2.5" -8NPSM
13×44, 4" -8UN
13×54, 2.5" -8NPSM
13×54, 4" -8UN
14×47, 2.5" -8NPSM
14×47, 4" -8UN
14×52, 2.5" -8NPSM
14×52, 4" -8UN
14×65, 2.5" -8NPSM
14×65, 4" -8UN
14×65, 4"×4"-8UN
16×52, 2.5" -8NPSM
16×52, 4" -8UN
16×65, 2.5" -8NPSM
16×65, 4" -8UN
18×36, 4" -8UN
18×53, 4" -8UN
18×65, 4" -8UN
18×65, 4"x 4" -8UN
21×36, 4" -8UN
21×53, 4" -8UN
21×62, 4" -8UN
21×62, 4"x 4" -8UN
24×65, 4" -8UN
24×65, 4"x 4" -8UN
24×72, 4" -8UN
24×72, 4"x 4" -8UN
30×72, 4" -8UN
30×72, 4"x 4" -8UN
30×72, 6"× 6"FLG
36x72 4"-8UN
36x72 4"x4" -8UN
36×72, 6" x 6" FLG
42×63, 6" x 6" FLG
42×72, 6" x 6" FLG
48×72, 6" x 6" FLG
63×67, 6" x 6" FLG
63×86, 6" x 6" FLG
[1] Conforms to the material and structural integrity requirements.

Performance Water Products, Inc.
6902 Aragon Circle
Buena Park, CA 90620
United States
800-374-6428

Facility : Buena Park, CA

Facility : Mukwonago, WI

Pureteck Co., Inc.
3410 Pomona Boulevard
Pomona, CA 91768
United States
909-627-0619
Visit this company's website

Facility : # 3 China

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
N/A
PMT-0613
PMT-0617
PMT-0618
PMT-0635
PMT-0713
PMT-0717
PMT-0724
PMT-0730
PMT-0735
PMT-0744
PMT-0813
PMT-0817
PMT-0819
PMT-0824
PMT-0830
PMT-0835
PMT-0844
PMT-0917
PMT-0930
PMT-0935
PMT-0942
PMT-0948
PMT-1017
PMT-1019
PMT-1024
PMT-1030
PMT-1035
PMT-1044
PMT-1047
PMT-1054
PMT-1054-4
PMT-1248
PMT-1252
PMT-1344
PMT-1344-4
PMT-1354
PMT-1354-4
PMT-1447
PMT-1447-4
PMT-1452
PMT-1452-4
PMT-1465
PMT-1465-4
PMT-1465-44
PMT-1652
PMT-1652-4
PMT-1665
PMT-1665-4
PMT-1665-44
PMT-1836-4
PMT-1853-4
PMT-1865-4
PMT-1865-44
PMT-2136-4
PMT-2153-4
PMT-2162-4
PMT-2162-44
PMT-2465-4
PMT-2465-44
PMT-2472-4
PMT-2472-44
PMT-3072-4
PMT-3072-44
PMT-3072-66F
PMT-3672-4
PMT-3672-44
PMT-3672-66F
PMT-4263-66F
PMT-4272-66F
PMT-4872-66F
PMT-6367-66F
PMT-6386-66F

Rayned LLC
3231 Old Winter Garden Road
Orlando, FL 32805
United States
407-536-4554

Facility : Beijing City, China


COMPONENTS: Tanks, Water Softener[1]
RAY6-13, T-2.5"
RAY6-17, T-2.5"
RAY6-18, T-2.5"
RAY6-29, T-2.5"
RAY6-35, T-2.5"
RAY7-13, T-2.5"
RAY7-17, T-2.5"
RAY7-19, T-2.5"
RAY7-24, T-2.5"
RAY7-30, T-2.5"
RAY7-35, T-2.5"
RAY7-40, T-2.5"
RAY7-44, T-2.5"
RAY8-13, T-2.5"
RAY8-17, T-2.5"
RAY8-18, T-2.5"
RAY8-24, T-2.5"
RAY8-30, T-2.5"
RAY8-35, T-2.5"
RAY8-40, T-2.5"
RAY8-44, T-2.5"
RAY9-17, T-2.5"
RAY9-18, T-2.5"
RAY9-24, T-2.5"
RAY9-30, T-2.5"
RAY9-35, T-2.5"
RAY9-40, T-2.5"
RAY9-42, T-2.5"
RAY9-48, T-2.5"
RAY10-13, T-2.5"
RAY10-16, T-2.5"
RAY10-17, T-2.5"
RAY10-18, T-2.5"
RAY10-19, T-2.5"
RAY10-22, T-2.5"
RAY10-24, T-2.5"
RAY10-30, T-2.5"
RAY10-35, T-2.5"
RAY10-40, T-2.5"
RAY10-44, T-2.5"
RAY10-47, T-2.5"
RAY10-54, T-2.5"
RAY12-36, T-2.5"
RAY12-42, T-2.5"
RAY12-48, T-2.5"
RAY12-52, T-2.5"
RAY13-44, T-2.5"
RAY13-44, T-4"
RAY13-54, T-2.5"
RAY13-54, T-4"
RAY14-47, T-2.5"
RAY14-47, T-4"
RAY14-52, T-2.5"
RAY14-52, T-4"
RAY14-65, T-2.5"
RAY14-65, T-4"
RAY16-28, T-2.5"
RAY16-28, T-4"
RAY16-52, T-2.5"
RAY16-52, T-4"
RAY16-65, T-2.5"
RAY16-65, T-4"
RAY18-36, T-4"
RAY18-53, T-4"
RAY18-65, T-4"
RAY18-65, T-4"xB-4"
RAY21-36, T-4"
RAY21-53, T-4"
RAY21-62, T-4"
RAY21-62, T-4"xB-4"
RAY24-65, T-4"
RAY24-65, T-4"xB-4"
RAY24-72, T-4"
RAY24-72, T-4"xB4"
RAY30-72, T-4"
RAY30-72, T-4"xB-4"
RAY16-52, T-2.5"xB-4"
RAY16-52, T-2.5"xB-2.5"
RAY16-65, T-2.5"xB-4"
RAY16-65, T-2.5"xB-2.5"
RAY16-65, T-4"xB-4"
[1] Conforms to the material and structural integrity requirements.

Shengdong Technology Co., Ltd.
No. 88 Zhuhu Road
Tianchang City
Anhui Province 239300
China
86 550 732 2555

Facility : Anhui, China

Taiyuan Lanlang Technology Industrial Corp.
B25, No. 175, North Jiefang Road
Taiyuan, Shanxi
China
86 351 334 3081

Facility : # 1 China


COMPONENTS: Media, Cation Exchange Resin[1] [2]
Hypermix®
Lanlang®HyperLR
Lanlang®TC007FG
Lanlang®TC008FG
Lanlang®TC008FGF
Lanlang®TC010FG
Lanlang®TC011FG
Lanlang®TC012FG
Lanlang®TC113FGD
Lanlang®TC115FGD
[1] Trade names Lanlang®TC007FG, Lanlang®TC008FG, Lanlang®TC010FG, Lanlang®TC011FG, Lanlang®TC012FG, Lanlang®TC113FGD, Lanlang®TC115FGD, Hypermix®, Lanlang®HyperLR are certified for particle size 0.315-1.25 mm. Trade name Lanlang®TC008FGF is certified for particle size 0.21-0.56 mm. [2] Certified for a maximum use level of 800 g/L.

Taiyuan Lanlang Technology Industrial Corp.
B25, No.175, North Jiefang Road
Taiyuan, Shanxi 030002
China
86 351 334 3081
Visit this company's website

Facility : # 1 China


COMPONENTS: Tanks, Water Softener[1]
Lanlang® FRP610
Lanlang® FRP613
Lanlang® FRP617
Lanlang® FRP618
Lanlang® FRP629
Lanlang® FRP635
Lanlang® FRP713
Lanlang® FRP717
Lanlang® FRP730
Lanlang® FRP735
Lanlang® FRP744
Lanlang® FRP813
Lanlang® FRP817
Lanlang® FRP824
Lanlang® FRP835
Lanlang® FRP917
Lanlang® FRP935
Lanlang® FRP942
Lanlang® FRP948
Lanlang® FRP1017
Lanlang® FRP1019
Lanlang® FRP1024
Lanlang® FRP1035
Lanlang® FRP1044
Lanlang® FRP1054
Lanlang® FRP1054U
Lanlang® FRP1236U
Lanlang® FRP1248
Lanlang® FRP1252
Lanlang® FRP1265
Lanlang® FRP1354
Lanlang® FRP1354U
Lanlang® FRP1452
Lanlang® FRP1465
Lanlang® FRP1665
Lanlang® FRP1665U
Lanlang® FRP1865
Lanlang® FRP2069
Lanlang® FRP2136
Lanlang® FRP2162
Lanlang® FRP2472
Lanlang® FRP3072
Lanlang® FRP3665
Lanlang® FRP4065
Lanlang® FRP4872
Lanlang® FRP6079
Lanlang® FRP6367
Lanlang® FRP6386
Lanlang® FRP7279
Lanlang® FRP8079
[1] Conforms to material and structural integrity requirements.

UAB “Chemsys”
Veterinarų 38, Biruliškės
Kaunas LT-54469
Lithuania
370 699 53317

Facility : # 1 China

Villarreal División Equipos, S.A. de C.V.
Morelos 905 Sur, Col. Centro
Allende, Nuevo Leon 67350
Mexico
52 826 268 0802

Facility : Nei Mongol, China


COMPONENTS: Media, Cation Exchange Resin
PK-RESINA-CA

Water Channel Partners
1890 Woodlane Drive
Woodbury, MN 55125
United States
800-869-2837

Facility : # 2 USA


COMPONENTS: Valves, Ball[Pb] [POE]
7388589
Morton 7379785
Whirlpool WHECSV4
[Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.
Point-of-Entry [1] [Pb] [POE]
Ecodyne IDP30S[2]	7.2	Hardness Reduction[HR] Efficiency Rated[ER] Barium Reduction Radium 226/228 Reduction
Ecodyne IDP40S[2]	8	Hardness Reduction[HR] Efficiency Rated[ER] Barium Reduction Radium 226/228 Reduction
Ecopure EP 6130[2]	7.3	Hardness Reduction[HR] Efficiency Rated[ER]
Ecopure EP30[2]	7	Hardness Reduction[HR] Efficiency Rated[ER]
Ecopure EP31[2]	7.2	Hardness Reduction[HR] Efficiency Rated[ER]
Ecopure EP40[2]	8.5	Hardness Reduction[HR] Efficiency Rated[ER]
Ecopure EP42[2]	8.2	Hardness Reduction[HR] Efficiency Rated[ER]
Ecopure EPHS[2]	8	Efficiency Rated[ER] Hardness Reduction[HR] Barium Reduction Radium 226/228 Reduction
Ecopure EPHY[2]	6.5	Efficiency Rated[ER] Hardness Reduction[HR] Barium Reduction Radium 226/228 Reduction
Kenmore 625.383500[2]	7.2	Hardness Reduction[HR] Efficiency Rated[ER]
Kenmore 625.384200[2]	7.7	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Kenmore 625.385200[2]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
Kenmore 625.386200[2]	8	Efficiency Rated[ER] Hardness Reduction[HR] Barium Reduction Radium 226/228 Reduction
Morton M20[2]	6.5	Hardness Reduction[HR] Efficiency Rated[ER]
Morton M27[2]	6.5	Hardness Reduction[HR] Efficiency Rated[ER]
Morton M30[2]	7	Hardness Reduction[HR] Efficiency Rated[ER]
Morton M34 [2]	7.8	Hardness Reduction[HR] Efficiency Rated[ER]
Morton M45[2]	10	Hardness Reduction[HR] Efficiency Rated[ER]
Morton M45C[2]	10	Hardness Reduction[HR] Efficiency Rated[ER]
Morton MHY[2]	6.5	Hardness Reduction[HR] Efficiency Rated[ER] Barium Reduction Radium 226/228 Reduction
North Star NSC22[2]	7.2	Hardness Reduction[HR] Efficiency Rated[ER]
North Star NSC31[2]	7.2	Hardness Reduction[HR] Efficiency Rated[ER]
North Star NSC42[2]	9.9	Hardness Reduction[HR] Efficiency Rated[ER]
North Star NSCWC[2]	8	Hardness Reduction[HR] Efficiency Rated[ER] Barium Reduction Radium 226/228 Reduction
North Star NSCWHC [2]	8	Hardness Reduction[HR] Efficiency Rated[ER] Radium 226/228 Reduction Barium Reduction
North Star NST30ED[2]	7.3	Hardness Reduction[HR] Efficiency Rated[ER]
North Star NST45ED1[2]	10	Hardness Reduction[HR] Efficiency Rated[ER]
North Star NST70ED1[2]	14	Hardness Reduction[HR] Efficiency Rated[ER]
Rheem RHS18[1] [2] [Pb]	7	Hardness Reduction[HR] Efficiency Rated[ER] Barium Reduction Radium 226/228 Reduction
Rheem RHS32[2]	8	Efficiency Rated[ER] Hardness Reduction[HR] Barium Reduction Radium 226/228 Reduction
Rheem RHS42[2]	9.9	Efficiency Rated[ER] Hardness Reduction[HR] Barium Reduction Radium 226/228 Reduction
Rheem RHW42[2]	9.9	Efficiency Rated[ER] Hardness Reduction[HR] Barium Reduction Radium 226/228 Reduction
Whirlpool WHEC46[2]	12.5	Efficiency Rated[ER] Hardness Reduction[HR]
Whirlpool WHES18[2]	7	Efficiency Rated[ER] Hardness Reduction[HR]
Whirlpool WHES30[2]	7.6	Hardness Reduction[HR] Efficiency Rated[ER]
Whirlpool WHES33[2]	8	Hardness Reduction[HR] Efficiency Rated[ER]
Whirlpool WHES40[2]	7.6	Hardness Reduction[HR] Efficiency Rated[ER]
Whirlpool WHES44[2]	8.2	Hardness Reduction[HR] Efficiency Rated[ER]
Whirlpool WHES48[2]	12	Hardness Reduction[HR] Efficiency Rated[ER]
Whirlpool WHESFC[2]	8	Hardness Reduction[HR] Efficiency Rated[ER]
[1] Product also complies with NSF/ANSI 372. [1] Product also complies with NSF/ANSI 372. [2] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Facility : # 3 USA

Waterboss
4343 South Hamilton Road
Groveport, OH 43125
United States
614-836-9422
Visit this company's website

Facility : Groveport, OH

	Flow Rate
Brand Name / Trade Name / Model	(gpm)	Claim
Point-of-Entry [POE]
PRO180[1]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
PROPLUS380[1]	9.4	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
ProSeries 50LM[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ProSeries 50PS[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ProSeries 51LM[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ProSeries 51PS[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
ProSeries 51PS-B[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
WaterBoss 220[1]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
WaterBoss 225[1]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
WaterBoss 365[1]	8	Barium Reduction Efficiency Rated[ER] Hardness Reduction[HR] Radium 226/228 Reduction
WaterBoss 700[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
WaterBoss 900[1]	7.5	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
WaterBoss 950[1]	8	Barium Reduction Efficiency Rated[ER] Radium 226/228 Reduction Hardness Reduction[HR]
[1] Product evaluated and determined to comply with efficiency rating requirements defined by California state laws. [ER] Softener Efficiency indicates that the softener achieves a minimum of 3,350 grains of hardness removed per pound of regenerant salt (477 grams of hardness removed per kilogram of regenerant salt), and also that it uses 5 gallons or less of regenerant water per 1,000 grains of hardness removed (18.9 liters or less of regenerant water per 64.8 grams of hardness removed). [HR] Hardness Reduction indicates that the published capacity ratings for reducing hardness have been verified. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Waterworld USA, Inc.
13550 South Gessner Rd.
Missouri City, TX 77489
United States
281-933-5777
Visit this company's website

Facility : Shanghai, China


COMPONENTS: Tanks, Water Softener[1] [Pb]
UTPG-0844-BK
UTPG-0948-BK
UTPG-1054-BK
UTPG-1252-BK
UTPG-1354-BK
UTPG-1465-BK-40
UTPG-1665-BK-40
UTPG-2162-BK-40
[1] Conforms to material and structural integrity requirements. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Wave Cyber Environmental Protection Equipment Co., Ltd.
No. 799, Rujiadian Road, Lianshi Town
Nanxun District, Huzhou
Zhejiang Province 313009
China
86 216 975 8588
Visit this company's website

Facility : Huzhou, China


COMPONENTS: Tanks, Water Softener[1] [2] [Pb] [POE]
10x13, 2.5" ACME Inlet
10x13, 2.5" Inlet
10x13, 2.5" x 2.5" Inlet
10x13, 4" Inlet
10x13, 4" x 2.5" Inlet
10x16, 2.5" ACME Inlet
10x16, 2.5" Inlet
10x16, 2.5" x 2.5" Inlet
10x16, 4" Inlet
10x16, 4" x 2.5" Inlet
10x17, 2.5" ACME Inlet
10x17, 2.5" Inlet
10x17, 2.5" x 2.5" Inlet
10x17, 4" Inlet
10x17, 4" x 2.5" Inlet
10x18, 2.5" ACME Inlet
10x18, 2.5" Inlet
10x18, 2.5" x 2.5" Inlet
10x18, 4" Inlet
10x18, 4" x 2.5" Inlet
10x19, 2.5" ACME Inlet
10x19, 2.5" Inlet
10x19, 2.5" x 2.5" Inlet
10x19, 4" Inlet
10x19, 4" x 2.5" Inlet
10x22, 2.5" ACME Inlet
10x22, 2.5" Inlet
10x22, 2.5" x 2.5" Inlet
10x22, 4" Inlet
10x22, 4" x 2.5" Inlet
10x24, 2.5" ACME Inlet
10x24, 2.5" Inlet
10x24, 2.5" x 2.5" Inlet
10x24, 4" Inlet
10x24, 4" x 2.5" Inlet
10x30, 2.5" ACME Inlet
10x30, 2.5" Inlet
10x30, 2.5" x 2.5" Inlet
10x30, 4" Inlet
10x30, 4" x 2.5" Inlet
10x32, 2.5" Inlet
10x35, 2.5" ACME Inlet
10x35, 2.5" Inlet
10x35, 2.5" Inlet 1.25" Dome Hole
10x35, 2.5" x 2.5" Inlet
10x35, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x35, 4" Inlet
10x35, 4" x 2.5" Inlet
10x35, 4" x 2.5" Inlet 1.25" Dome Hole
10x40, 2.5" ACME Inlet
10x40, 2.5" ACME QH Tank
10x40, 2.5" Inlet
10x40, 2.5" Inlet 1.25" Dome Hole
10x40, 2.5" x 2.5" Inlet
10x40, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x40, 4" Inlet
10x40, 4" x 2.5" Inlet
10x40, 4" x 2.5" Inlet 1.25" Dome Hole
10x44, 2.5" ACME Inlet
10x44, 2.5" Inlet
10x44, 2.5" Inlet 1.25" Dome Hole
10x44, 2.5" x 2.5" Inlet
10x44, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x44, 4" Inlet
10x44, 4" x 2.5" Inlet
10x44, 4" x 2.5" Inlet 1.25" Dome Hole
10x47, 2.5" ACME Inlet
10x47, 2.5" Inlet
10x47, 2.5" Inlet 1.25" Dome Hole
10x47, 2.5" x 2.5" Inlet
10x47, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x47, 3" Inlet
10x47, 4" Inlet
10x47, 4" x 2.5" Inlet
10x47, 4" x 2.5" Inlet 1.25" Dome Hole
10x54, 2.5" ACME Inlet
10x54, 2.5" ACME Inlet, 1.25" Dome Hole
10x54, 2.5" ACME QH TFP TANK
10x54, 2.5" ACME QH Tank
10x54, 2.5" Inlet
10x54, 2.5" Inlet 1.25" Dome Hole
10x54, 2.5" x 2.5" Inlet
10x54, 2.5" x 2.5" Inlet 1.25" Dome Hole
10x54, 3.0" Inlet
10x54, 4" Inlet
10x54, 4" x 2.5" Inlet
10x54, 4" x 2.5" Inlet 1.25" Dome Hole
12x36, 2.5" Inlet
12x36, 2.5" Inlet 1.25" Dome Hole
12x36, 4.5" Inlet
12x42, 2.5" Inlet
12x42, 4.5" Inlet
12x48, 2.5" ACME Inlet
12x48, 2.5" Inlet
12x48, 2.5" Inlet 1.25" Dome Hole
12x48, 2.5" x 2.5" Inlet
12x48, 2.5" x 2.5" Inlet 1.25" Dome Hole
12x48, 4" Inlet
12x48, 4" Inlet 1.25" Dome Hole
12x48, 4" x 2.5" Inlet
12x48, 4" x 2.5" Inlet 1.25" Dome Hole
12x48, 4" x 4" Inlet
12x48, 4.5" Butress Inlet
12x52, 2.5" ACME Inlet
12x52, 2.5" ACME Inlet, 1.25" Dome Hole
12x52, 2.5" ACME QH TFP TANK
12x52, 2.5" Inlet
12x52, 2.5" Inlet 1.25" Dome Hole
12x52, 2.5" x 2.5" Inlet
12x52, 2.5" x 2.5" Inlet 1.25" Dome Hole
12x52, 4" Inlet
12x52, 4" x 2.5" Inlet
12x52, 4" x 2.5" Inlet 1.25" Dome Hole
12x52, 4" x 4" Inlet
12x52, 4.5" Butress Inlet
13x44, 2.5" Inlet
13x44, 2.5" Inlet 1.25" Dome Hole
13x44, 2.5" x 2.5" Inlet
13x44, 2.5" x 2.5" Inlet 1.25" Dome Hole
13x44, 4" Inlet
13x44, 4" Inlet 1.25" Dome Hole
13x44, 4" x 2.5" Inlet
13x44, 4" x 2.5" Inlet 1.25" Dome Hole
13x44, 4" x 4" Inlet
13x44, 4.5" Butress Inlet
13x54, 2.5" Inlet
13x54, 2.5" Inlet 1.25" Dome Hole
13x54, 2.5" x 2.5" Inlet
13x54, 2.5" x 2.5" Inlet 1.25" Dome Hole
13x54, 4" Inlet
13x54, 4" Inlet 1.25" Dome Hole
13x54, 4" x 2.5" Inlet
13x54, 4" x 2.5" Inlet 1.25" Dome Hole
13x54, 4" x 4" Inlet
13x54, 4.5" Butress Inlet
13×35, 2.5" NPSM Inlet
13×35, 4" Inlet
14x47, 2.5" Inlet
14x47, 2.5" Inlet 1.25" Dome Hole
14x47, 2.5" x 2.5" Inlet
14x47, 2.5" x 2.5" Inlet 1.25" Dome Hole
14x47, 4" Inlet
14x47, 4" Inlet 1.25" Dome Hole
14x47, 4" x 2.5" Inlet
14x47, 4" x 2.5" Inlet 1.25" Dome Hole
14x47, 4" x 4" Inlet
14x47, 4.5" Butress Inlet
14x52, 2.5" Inlet
14x52, 2.5" Inlet 1.25" Dome Hole
14x52, 2.5" x 2.5" Inlet
14x52, 2.5" x 2.5" Inlet 1.25" Dome Hole
14x52, 4" Inlet
14x52, 4" Inlet 1.25" Dome Hole
14x52, 4" x 2.5" Inlet
14x52, 4" x 2.5" Inlet 1.25" Dome Hole
14x52, 4" x 4" Inlet
14x52, 4.5" Butress Inlet
14x65, 2.5" ACME Inlet
14x65, 2.5" ACME QH TFP TANK
14x65, 2.5" Inlet
14x65, 2.5" Inlet 1.25" Dome Hole
14x65, 2.5" x 2.5" Inlet
14x65, 2.5" x 2.5" Inlet 1.25" Dome Hole
14x65, 4" Inlet
14x65, 4" Inlet 1.25" Dome Hole
14x65, 4" x 2.5" Inlet
14x65, 4" x 2.5" Inlet 1.25" Dome Hole
14x65, 4" x 4" Inlet
14x65, 4.5" Butress Inlet
16x28, 2.5" Inlet
16x28, 2.5" Inlet 1.25" Dome Hole
16x28, 2.5" x 2.5" Inlet
16x28, 2.5" x 2.5" Inlet 1.25" Dome Hole
16x28, 4" Inlet
16x28, 4" Inlet 1.25" Dome Hole
16x28, 4" x 2.5" Inlet
16x28, 4" x 2.5" Inlet 1.25" Dome Hole
16x28, 4" x 4" Inlet
16x28, 4.5" Butress Inlet
16x40, 4.5" Inlet
16x52, 2.5" Inlet
16x52, 2.5" Inlet 1.25" Dome Hole
16x52, 2.5" x 2.5" Inlet
16x52, 2.5" x 2.5" Inlet 1.25" Dome Hole
16x52, 4" Inlet
16x52, 4" Inlet 1.25" Dome Hole
16x52, 4" x 2.5" Inlet
16x52, 4" x 2.5" Inlet 1.25" Dome Hole
16x52, 4" x 4" Inlet
16x52, 4.5" Butress Inlet
16x53, 4.5" Inlet
16x65, 2.5" ACME QH TFP TANK
16x65, 2.5" Inlet
16x65, 2.5" Inlet 1.25" Dome Hole
16x65, 2.5" x 2.5" Inlet
16x65, 2.5" x 2.5" Inlet 1.25" Dome Hole
16x65, 4" Inlet
16x65, 4" Inlet 1.25" Dome Hole
16x65, 4" x 2.5" Inlet
16x65, 4" x 2.5" Inlet 1.25" Dome Hole
16x65, 4" x 4" Inlet
16x65, 4.5" Butress Inlet
16×55, 2.5" NPSM Inlet
16×55, 4" Inlet
18x36, 4" Inlet
18x36, 4" x 4" Inlet
18x53, 4" Inlet
18x53, 4" x 4" Inlet
18x65, 4" Inlet
18x65, 4" x 4" Inlet
18x65, 6" Flange
18x65, 6" x 6" Flange
21x36, 4" Inlet
21x36, 4" x 4" Inlet
21x53, 4" Inlet
21x53, 4" x 4" Inlet
21x53, 4.5" x 4.5" Inlet
21x62, 4" Inlet
21x62, 4" x 4" Inlet
21x62, 6" Flange
21x62, 6" x 6" Flange
24x65, 4" Inlet
24x65, 4" x 4" Inlet
24x65, 6" Flange
24x65, 6" x 6" Flange
24x72, 4" Inlet
24x72, 4" x 4" Inlet
24x72, 6" Flange
24x72, 6" x 6" Flange
30x72, 4" Inlet
30x72, 4" x 4" Inlet
30x72, 6" Flange
30x72, 6" x 6" Flange
36x57, 4" Inlet
36x57, 4" x 4" Inlet
36x57, 6" Flange
36x57, 6" x 6" Flange
36x63, 6" x 6" Flange
36x63, 6" x 6" Flange
36x72, 4" Inlet
36x72, 4" x 4" Inlet
36x72, 6" Flange
36x72, 6" x 6" Flange
42x51, 6" x 6" Flange
42x63, 6" x 6" Flange (A)
42x63, 6" x 6" Flange (B)
42x66, 6" x 6" Flange
42x72, 6" x 6" Flange
48x72, 6" x 6" Flange
63x67, 6" x 10" Flange
63x67, 6" x 6" Flange
63x86, 6" x 10" Flange
63x86, 6" x 6" Flange
6x10, 2.5" ACME Inlet
6x10, 2.5" Inlet
6x12, 2.5" ACME Inlet
6x12, 2.5" Inlet
6x13, 2.5" ACME Inlet
6x13, 2.5" Inlet
6x17, 2.5" ACME Inlet
6x17, 2.5" Inlet
6x18, 2.5" ACME Inlet
6x18, 2.5" Inlet
6x29, 2.5" ACME Inlet
6x29, 2.5" Inlet
6x35, 2.5" ACME Inlet
6x35, 2.5" Inlet
7x13, 2.5" ACME Inlet
7x13, 2.5" Inlet
7x17, 2.5" ACME Inlet
7x17, 2.5" Inlet
7x19, 2.5" ACME Inlet
7x19, 2.5" Inlet
7x24, 2.5" ACME Inlet
7x24, 2.5" Inlet
7x30, 2.5" ACME Inlet
7x30, 2.5" Inlet
7x35, 2.5" ACME Inlet
7x35, 2.5" Inlet
7x40, 2.5" ACME Inlet
7x40, 2.5" Inlet
7x44, 2.5" ACME Inlet
7x44, 2.5" Inlet
8x13, 2.5" ACME Inlet
8x13, 2.5" Inlet
8x13, 2.5" x 2.5" Inlet
8x17, 2.5" ACME Inlet
8x17, 2.5" Inlet
8x17, 2.5" x 2.5" Inlet
8x18, 2.5" ACME Inlet
8x18, 2.5" Inlet
8x18, 2.5" x 2.5" Inlet
8x24, 2.5" ACME Inlet
8x24, 2.5" Inlet
8x24, 2.5" x 2.5" Inlet
8x30, 2.5" ACME Inlet
8x30, 2.5" Inlet
8x30, 2.5" x 2.5" Inlet
8x35, 2.5" ACME Inlet
8x35, 2.5" Inlet
8x35, 2.5" x 2.5" Inlet
8x40, 2.5" ACME Inlet
8x40, 2.5" Inlet
8x40, 2.5" x 2.5" Inlet
8x44, 2.5" ACME Inlet
8x44, 2.5" Inlet
8x44, 2.5" x 2.5" Inlet
8x47, 2.5" ACME Inlet
8x47, 2.5" Inlet
9x13, 2.5" Inlet
9x16, 2.5" Inlet
9x16, 2.5" Inlet ACME
9x17, 2.5" ACME Inlet
9x17, 2.5" Inlet
9x17, 2.5" x 2.5" Inlet
9x18, 2.5" ACME Inlet
9x18, 2.5" Inlet
9x18, 2.5" x 2.5" Inlet
9x22, 2.5" Inlet
9x24, 2.5" ACME Inlet
9x24, 2.5" Inlet
9x24, 2.5" x 2.5" Inlet
9x30, 2.5" ACME Inlet
9x30, 2.5" Inlet
9x30, 2.5" x 2.5" Inlet
9x32, 2.5" Inlet
9x35, 2.5" ACME Inlet
9x35, 2.5" Inlet
9x35, 2.5" x 2.5" Inlet
9x36, 2.5" Inlet ACME
9x40, 2.5" ACME Inlet
9x40, 2.5" Inlet
9x40, 2.5" x 2.5" Inlet
9x42, 2.5" ACME Inlet
9x42, 2.5" ACME QH TFP TANK
9x42, 2.5" ACME QH Tank
9x42, 2.5" Inlet
9x42, 2.5" x 2.5" Inlet
9x48, 2.5" ACME Inlet
9x48, 2.5" ACME QH TFP TANK
9x48, 2.5" ACME QH Tank
9x48, 2.5" Inlet
9x48, 2.5" x 2.5" Inlet
[1] Conforms to material and structural integrity requirements. [2] The "x" in the trade name may be omitted. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Wave Cyber USA, LLC
7249 Commerce Drive
Mentor, OH 44060
United States
440-510-0546
Visit this company's website

Facility : Mentor, OH


COMPONENTS: Tanks, Water Softener[1] [2] [Pb] [POE]
7x35, 2.5" Inlet
7x44, 2.5" Inlet
8x35, 2.5" Inlet
8x40, 2.5" Inlet
8x44, 2.5" Inlet
9x35, 2.5" Inlet
9x40, 2.5" Inlet
9x42, 2.5" Inlet
9x48, 2.5" Inlet
10x35, 2.5" Inlet
10x40, 2.5" Inlet
10x42, 2.5" Inlet
10x44, 2.5" Inlet
10x47, 2.5" Inlet
10x54, 2.5" Inlet
[1] Conforms to material and structural integrity requirements. [2] The "x" in the trade name may be omitted. [Pb] Product also evaluated and determined to possess weighted average lead content of <=0.25% and complies with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [POE] Product conforms to NSF/ANSI/CAN 61 health effects requirements.

Wenzhou Runxin Manufacturing Machine Co., Ltd.
No. 169 Runxin Road, Shanfu Town
Wenzhou, Zhejiang 325021
China
86 577 88633758
Visit this company's website

Facility : Wenzhou, China


COMPONENTS: Valves, Water Softener[1]
TM.F116/F70G[2]
TM.F56AQ[3] [4]
TM.F56BQ[3] [4]
TM.F56CQ[3] [4]
TM.F56EQ[3] [4]
TM.F56FQ[3] [4]
TM.F63RX[3] [5]
TM.F64AQ[3] [4]
TM.F64BQ[3] [4]
TM.F64CQ[3] [4]
TM.F64EQ[3] [4]
TM.F65RY[3] [5] [6]
TM.F67R[5]
TM.F68RX[3] [5] [6]
TM.F69RY[3] [5] [6]
TM.F71R[3] [5]
TM.F79R[5] [7]
TM.F82RX[5] [6] [8]
TM.F92RX[5] [6] [9]
TM.F92RX/F70E[5] [6] [9]
aquex 610410[3]
aquex 610413[3]
aquex 610416[3]
aquex 610418[3]
[1] Conforms to material and structural integrity requirements only. [2] Certified for use with tank sizes 8" x 35" or larger. This product is certified for 1 unit per 14.4 L. [3] Certified for use with tank sizes 8 x 17 and larger. The product is Certified for a maximum use level of 0.21 units per L. [4] "Q" refers to the material of hand shank and is denoted as a 1,2 or 3, which represent different materials. [5] "R" refers to the configuration of control box and is denoted as A, B, C, etc, which represent different configurations. [6] "X" refers to the 1" flow meters and may either be 1(by time) or 3 (by flow) to denote the measurement and "Y" refers to the 3/4" flow meters and may either be 1 (by time) or 3 (by flow). [7] Certified for use with tank sizes 7 x 13 and larger. [8] Certified for use with tank sizes 7 x 44 and larger. [9] Certified for use with tank sizes 10 x 54 and larger.

Yuyao Yadong Plastic Co., Ltd.
Weijia Village Moushan Town
Yuyao City, Zhejiang Province
315456
China
84 574 62497208

Facility : Zhejiang, China

Number of matching Manufacturers is 57
Number of matching Products is 2318
Processing time was 1 seconds

COMPONENTS: Media, Cation Exchange Resin[1] [2]

[1] Trade name TR-100E is certified for particle size 0.315-1.25 mm. [2] Certified for a maximum use level of 800 g/L.