NSF Product and Service Listings

These NSF Official Listings are current as of Monday, September 23, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=169&Company=00150&


NSF/ANSI 169
Special Purpose Food Equipment and Devices



 
A.U.K. Müller GmbH & Co. KG 
Dresdener Str. 162
D-40595 Dusseldorf 
Germany 
49 211 7391 000
Visit this company's website

Facility : Dusseldorf, Germany


Pressure Increasing Pump[1]
  N 41.008.2(1)(2)
 
[1] (1) Digit indicating motor type
    (2) 0 - Pairing stainless steel/PVDF
        1 - Pairing ceramic/ceramic
        2 - Pairing coated stainless steel / ceramic

COMPONENTS:

2/2 and 3/2 Way Solenoid Valve
  N 18.00x[2] [Pb]
 
[2] x is used as a place holder for a digit, which identifies the orifice size of the valve
    fittings.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Aqua Stop
  N 13.007

Dispense Pump for Use in Hot Water Boiler
  N 41.005.300[Pb]
 
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Dispenser Solenoid Valve for Cold and Hot Water[3]
  N 43.000
 
[3] Available in the following versions:
    Functioning: 2-way and 3-way valve with different nominal diameters
    Valve body configuration: for hose connection or bank valve
    Valve body: one or two piece body
    Materials: different hot water resistant materials
    With or without medium separation in the plunger area by membrane or bellow

Fitting
  N FitSys 18[Pb]
 
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Solenoid Lever Valve Series 47.00x[2] [Pb]
  N 47.00x
 
[2] x is used as a place holder for a digit, which identifies the orifice size of the valve
    fittings.
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Solenoid Valve[4]
  N 1.005
  N 1.008
  N 1.012
  N 1.014
  N 40.006
  N 40.008
  N 40.012
  N 40.014
  N 41.008.100
  N 46.006
  N 46.008
  N 46.012
  N 50.007
 
[4] With or without seal for direct mounting

Water Mechanical Filter[5]
  N 12.010.300
  N 12.010.500
  N 12.017.400
  N 12.017.500
 
[5] Only acceptable in contact with potable water of maximum 82°C.

Water Solenoid Valve[4] [5]
  W 1.007
  W 1.010
  W 1.013
  W 1.017
  W 1.021
  W 15.000
  W 15.017
  W 24.000
  W 29.007
  W 29.010
  W 44.007.126
 
[4] With or without seal for direct mounting
[5] Only acceptable in contact with potable water of maximum 82°C.


Number of matching Manufacturers is 1
Number of matching Products is 35
Processing time was 0 seconds