NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, May 27, 2017 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=018&Company=02130&


NSF/ANSI 18
Manual Food and Beverage Dispensing Equipment



 
Deltrol Controls 
2740 South 20th Street
P.O. Box 343915 
Milwaukee, WI 53234-3915 
United States 
414-671-6800
Visit this company's website

Facility : Milwaukee, WI


COMPONENTS:

3 - Way Dispensing Valve[1]
  70326-60
 
[1] NSF Certified models will begin with production date code 1148 (Year Year Week Week).

DHSP Hose Fitting
  75505-60[Pb]
 
[Pb] Product also evaluated and determined to possess weighted average lead content of
     <=0.25% and complies with lead content requirements for “lead free” plumbing as defined
     by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking
     Water Act.

Inlet Fitting Assemblies[3]
  DHSP-(1)-(2)-(3)
 
[3] (1)  Indicates tube length in inches, minimum 6 inches
    (2)  Indicates fitting #1 - Garden hose thread fitting, female swivel fitting, or male 
         compression fitting.
    (3)  Indicates Fitting #2 - Garden hose thread fitting, female swivel fitting, or male 
         compression fitting.

Liquid Dispensing Valve
  DSV10-21-2S1F[4]
  DSV10N-(1)4-(2)(3)(4)(5)[4] [5]
  DSV22N-090-A12A-B12
  DSV22N-090-A12A-B12-C8
  DSV28N-(1)-(2)-(3)-(4)-(5)[6] [7]
  DSV28N-090-A(1)F-P(2)2[8]
 
[4] Valve is Certified for use with water only.
[5] (1) Body style: 1 - Short inlet, 2 - Long inlet
    (2) Valve type
        1 - 24 VAC 60 Hz 30 Watts
        2 - 110/120 VAC 50/60 Hz 30 Watts
        3 - 220/240 VAC 50/60 Hz 30 Watts
        8 - DC voltages
    (3) Terminal position: S - Straight, U - Bent 90 degrees up
    (4) Coil bracket assembly: 1, 2, 3, or 4
    (5) Backstop type: A - Adjustable, F - Fixed backstop
[6] Valve is certified for use with alcoholic beverages or water.
[7] (1) NC - Normally close	 
        NO - Normally open	  	 
    (2)	D - Dry plunger	
        W - Wet Plunger	
    (3) Coil voltage	
        24 VAC  - 024A	
        100 VAC - 100A	
        120VAC  - 120A	
        200VAC  - 200A	
        240VAC  - 240A	
        12VDC   - 012D	
        24VDC   - 024D	
        36VDC   - 036D	
    (4) Port fitting	
        1/4" Barbs               - B1 (for 1/4" ID Tubing)
        Compression 5/16", [8mm] - C1	
        Compression 1/4"         - C2	
        Compression 6mm          - C3
        QC 6mm                   - Q1	
        QC 1/4                   - Q2	  	
    (5)	Valve seat diameter	
        Ø0.088 [2.2] - 088 (80 psi max)	
        Ø0.060 [1.5] - 060 (120psi max)	
[8] Suffixes denote the following:
    (1) Electrical ratings:
        07 - 12 VDC 6.5 W
        08 - 24 VDC 6.5 W
        11 - 24 VAC 50/60 Hz 7 W
        12 - 120 VAC 60 Hz- 110 VAC 50 Hz 7 W
        13 - 240 VAC 60 Hz 220 VAC 50 Hz 7 W
        14 - 34 VDC 6.5 W
        15 - 40 VDC 6.5 W
        16 - 14 VDC 6.5 W
    (2) Port size:
        6  - 3/8-19 BSP threaded inlet, barbed outlet (.100 inch diameter)
        7  - 5/8-18 threaded inlet, barbed outlet (.100 inch diameter)
        8  - barbed inlet (.140 inch diameter), 5/8-18 threaded outlet
        9  - 5/8-18 threaded inlet, barbed outlet (.140 inch diameter)
[9] Suffixes denote the following:
    (1) Valve type:
        12D  - 12 VDC 8 watts class "F" coil
        24A  - 24 VAC 50/60 Hz 5 watts class "F" coil
        24D  - 24 VDC 8 watts class "F" coil
        36D  - 36 VDC 8 watts class "F" coil
        100A - 100 VAC 50/60 Hz 5 watts class "F" coil
        120A - 120 VAC 50/60 Hz 5 watts class "F" coil
        200A - 200 VAC 50/60 Hz 5 watts class "F" coil
        240A - 240 VAC 50/60 Hz 5 watts class "F" coil
[10] Suffixes denote the following:
     (C) Coil options:
         1 -  24 VAC coil assembly
         2 - 120 VAC coil assembly
         3 - 240 VAC coil assembly
         8 - Special coil assembly
     (D) Terminal position: D - Down, S - Straight, U - Up
     (E) Mounting bracket:
         1 - No mounting bracket
         2 - Bracket welded to frame
         3 - 90° bracket with .312 diameter mounting holes
         4 - Frame legs with .219 wide x .375 long mounting holes
         5 - 90° bracket with .218 diameter mounting holes
     (F) Backstop style: A - Adjustable, F - Fixed
[11] Suffixes denote the following:

     (A) Body style:

         1  - Large seat  - .406 diameter orifice

         2  - Small seat  - .222 diameter orifice

         3  - Medium seat - .302/.320 diameter orifice

         4  - Medium seat - .302/.320 diameter orifice

         5  - Medium seat - .302/.320 diameter orifice

         6  - Medium seat - .302/.320 diameter orifice

         7  - Large seat  - .406 diameter orifice

         8  - Large seat  - .406/.470 diameter orifice

         9  - Medium seat - .302 diameter orifice

         10 - Large seat  - .406 diameter in-line ports

     (C) Vent: A - Vent (denotes vent for water only applications), S - Vent tube,

         V - Vent, X - No vent

     (D) Coil options:

         1 -  24 VAC coil assembly for adjustable backstop unit

         2 - 120 VAC coil assembly for adjustable backstop unit

         3 - 240 VAC coil assembly for adjustable backstop unit

         4 -  24 VAC coil assembly for fixed backstop unit

         5 - 120 VAC coil assembly for fixed backstop unit

         6 - 240 VAC coil assembly for fixed backstop unit

         7 - Special coil assembly for adjustable backstop unit

         8 - Special coil assembly for fixed backstop unit

     (E) Terminal position: D - Down, S - Straight, U - Up    

     (F) Terminal position relative to side port: B - Back, F - Front, L - Left, R - Right

     (G) Mounting bracket:

         1 - Flat bracket

         2 - 90° bracket with .312 diameter mounting holes

         3 - Flat bracket with 8-32 mounting holes

         4 - Extra long 90° bracket with 6-32 mounting holes

         5 - Extra long 90° bracket with .180 diameter mounting holes

         6 - Special 90° bracket with .312 diameter mounting holes

         7 - 90° bracket with .218 diameter mounting holes

         9 - 90° bracket with .109 radius slots

         X - 90° bracket with .281 diameter mounting holes

     (H) Bracket location relative to side port: B - Back, F - Front, L - Left, R - Right,

         X - No orientation

     (J) Flow type: 

         Blank space - Normally closed 

         NO - Normally open 

         J  - C-Fram w/.250 Q.C. Terminal 

         K  - Sq. Coil w/.250 Q.C. Terminal 

         L  - Sq. Coil: DIN 43650 Connector 

         M  - Sq. Coil: Deutcsh Connector 

         N  - Sq. Coil: Lead Wires
[12] Suffixes denote the following:
     (A) Indicates orifice size, inlet, and outlet port style:
         1 - 0.500 in ID Seat; Inlet Q/D - Outlet  B, 0.437 in 
         2 - 0.500 in ID Seat; Inlet Q/D - Outlet  Q/D, 0.437 in
         3 - 0.500 in ID Seat; Inlet N - Outlet  B, 0.312 in 	
         4 - 0.500 in ID Seat; Inlet S - Outlet  B, 0.312in 	
         5 - 0.500 in ID Seat; Inlet S - Outlet  B, 0.312 in 	    6 - 0.500 in ID Seat; Inlet
     Q/D - Outlet  B, 0.312 in
         7 - 0.500 in ID Seat; Inlet N - Outlet  B, 0.437 in 
         8 - 0.500 in ID Seat; Inlet H - Outlet  Q/D, 0.437 in 	
         9 - 0.452 in ID Seat; Inlet H - Outlet  H, 0.587 in 	
         Note: B - Barbed port, H - Hose port, N - 1/4" NPTF port, Q/D = Quick disconnect
     port, S - Straight port
     (B) Body material: L - Noryl, N - Nylon, P - Polysulfone
     (c) Diaphragm material: E - EPDM, S - Silicone
     (D) Vent options: V - Vent, X - No vent
     (E) Coil voltage: XXXAJ - AC Input, XXXLN - DC Input
[13] Suffixes denote the following: 
     (1) Coil voltage:
         12D  - 12 VDC 11 watts 1 minute on/1 minute off intermittent duty
         24D  - 24 VDC 11 watts 1 minute on/1 minute off intermittent duty
         36D  - 36 VDC 11 watts 1 minute on/1 minute off intermittent duty
         24A  - 24 VAC 50/60 Hz watts 1 minute on/1 minute off intermittent duty
         24E  - 24 VAC 50/60 Hz 14 watts (FWR) 1 minute on/ 1 minute off intermittent duty
         24F  - 24 VDC 16 watts 1 minute on/ 1 minute off intermittent duty
         100A - 100 VAC 50/60 Hz 12 watts 1 minute on/1 minute off intermittent duty
         120A - 120 VAC 50/50 Hz 12 watts 1 minute on/1 minute off intermittent duty
         120E - 120 VAC 50/60 Hz 14 watts (FWR) 1 minute on/1 minute off intermittent duty
         200A - 200 VAC 50/60 Hz 12 watts 1 minute on/1 minute off intermittent duty
         240A - 240 VAC 50/60 Hz 12 watts 1 minute on/1 minute off intermittent duty
         240E - 240 VAC 50/60 Hz 14 watts (FWR) 1 minute on/1 minute off intermittent duty
     (2) Valve type: A - Twist-lock with flow adjuster, B - Twist-lock without flow adjuster,
     
         C - Snap-lock with flow adjuster, D - Snap-lock without flow adjuster
     (3) Orifice diameter: S - Small orifice (.302 diameter), M - Medium orifice 
         (.330 diameter), L - Large orifice (.406 diameter)
[14] Suffixes denote the following:
     (1) Outlet type: R - Right angle barbed outlet, S - Straight barbed outlet,
         T - Threaded outlet
     (2) Coil voltage:
         1 - 110/120 VAC 50/60 Hz 
         2 - 220/240 VAC 50/60 Hz
         3 - 24 VAC 50/60 Hz
         4 - 24 VDC
     (3) Coil position relative to inlet:
         B - Back opposite of inlet
         F - Front in line with inlet
         L - Left of inlet
         R - Right of inlet
     (4) Flow rate: Maximum of three alphanumeric characters denoting flow rate (optional). 
         Flow rate is not always stated.
     (5) Inlet bracket: Maximum of two alphanumeric characters representing bracket selection.
[15] Suffixes denote the following:
     (1) Outlet type: R - Barbed, T - Threaded
     (2) Coil voltage: 1 - 120, 2 - 240, 3 - 24, 4 - Other
     (3) Coil position relative to inlet: B - Back, F - Front, L - Left, R - Right
     (4) Flow: Maximum of three alphanumeric characters
     (5) Inlet Bracket: Maximum of two alphanumeric characters representing bracket selection.
[16] Suffixes denote the following:
     (1) Outlet type: R - Right angle barbed outlet, S - Straight barbed outlet
     (2) Coil voltage:
         1 - 110/120 VAC 50/60 Hz 
         2 - 220/240 VAC 50/60 Hz
         3 - 24 VAC 50/60 Hz
         4 - 24 VDC
     (3) Coil position relative to inlet: B - Back opposite of inlet,
         F - Front in line with inlet
     (4) Flow rate: Maximum of three alphanumeric characters denoting flow rate (optional).
         Flow rate is not always stated.
     (5) Inlet bracket: Maximum of two alphanumeric characters representing bracket selection.

Liquid Dispensing Valve[17]
  DSV29N-(1)-(2)-(3)
 
[17] (1) Indicates pressure rating 100 pis
     (2) Indicates voltage - 024D (24VDC) 
     (3) Indicates body material - stainless steel

Liquid Dispensing Valve
  DSV43N-145-F(1)-B12[4] [9]
  DSV43N-145-F(1)-S12[4] [9]
  DSVP10N-40(C)(D)(E)(F)[4] [10]
  DSVP11N-(A)P(C)(D)(E)(F)(G)(H)5(J)[11]
  DSVP12N-(A)P(C)(D)(E)[4] [12]
  DSVP14N-(A)P(C)(D)(E)(F)(G)(H)[11]
  DSVP14NA-(A)P(C)(D)(E)(F)(G)(H)[11]
  DSVP15N-(1)-(2)(3)[13]
  DSVP40-(1)-(2)-(3)-(4)-(5)[14]
  DSVP41-(1)-(2)-(3)-(4)-(5)[15]
  DSVP42-(1)-(2)-(3)-(4)-(5)[16]
 
[4] Valve is Certified for use with water only.
[5] (1) Body style: 1 - Short inlet, 2 - Long inlet
    (2) Valve type
        1 - 24 VAC 60 Hz 30 Watts
        2 - 110/120 VAC 50/60 Hz 30 Watts
        3 - 220/240 VAC 50/60 Hz 30 Watts
        8 - DC voltages
    (3) Terminal position: S - Straight, U - Bent 90 degrees up
    (4) Coil bracket assembly: 1, 2, 3, or 4
    (5) Backstop type: A - Adjustable, F - Fixed backstop
[6] Valve is certified for use with alcoholic beverages or water.
[7] (1) NC - Normally close	 
        NO - Normally open	  	 
    (2)	D - Dry plunger	
        W - Wet Plunger	
    (3) Coil voltage	
        24 VAC  - 024A	
        100 VAC - 100A	
        120VAC  - 120A	
        200VAC  - 200A	
        240VAC  - 240A	
        12VDC   - 012D	
        24VDC   - 024D	
        36VDC   - 036D	
    (4) Port fitting	
        1/4" Barbs               - B1 (for 1/4" ID Tubing)
        Compression 5/16", [8mm] - C1	
        Compression 1/4"         - C2	
        Compression 6mm          - C3
        QC 6mm                   - Q1	
        QC 1/4                   - Q2	  	
    (5)	Valve seat diameter	
        Ø0.088 [2.2] - 088 (80 psi max)	
        Ø0.060 [1.5] - 060 (120psi max)	
[8] Suffixes denote the following:
    (1) Electrical ratings:
        07 - 12 VDC 6.5 W
        08 - 24 VDC 6.5 W
        11 - 24 VAC 50/60 Hz 7 W
        12 - 120 VAC 60 Hz- 110 VAC 50 Hz 7 W
        13 - 240 VAC 60 Hz 220 VAC 50 Hz 7 W
        14 - 34 VDC 6.5 W
        15 - 40 VDC 6.5 W
        16 - 14 VDC 6.5 W
    (2) Port size:
        6  - 3/8-19 BSP threaded inlet, barbed outlet (.100 inch diameter)
        7  - 5/8-18 threaded inlet, barbed outlet (.100 inch diameter)
        8  - barbed inlet (.140 inch diameter), 5/8-18 threaded outlet
        9  - 5/8-18 threaded inlet, barbed outlet (.140 inch diameter)
[9] Suffixes denote the following:
    (1) Valve type:
        12D  - 12 VDC 8 watts class "F" coil
        24A  - 24 VAC 50/60 Hz 5 watts class "F" coil
        24D  - 24 VDC 8 watts class "F" coil
        36D  - 36 VDC 8 watts class "F" coil
        100A - 100 VAC 50/60 Hz 5 watts class "F" coil
        120A - 120 VAC 50/60 Hz 5 watts class "F" coil
        200A - 200 VAC 50/60 Hz 5 watts class "F" coil
        240A - 240 VAC 50/60 Hz 5 watts class "F" coil
[10] Suffixes denote the following:
     (C) Coil options:
         1 -  24 VAC coil assembly
         2 - 120 VAC coil assembly
         3 - 240 VAC coil assembly
         8 - Special coil assembly
     (D) Terminal position: D - Down, S - Straight, U - Up
     (E) Mounting bracket:
         1 - No mounting bracket
         2 - Bracket welded to frame
         3 - 90° bracket with .312 diameter mounting holes
         4 - Frame legs with .219 wide x .375 long mounting holes
         5 - 90° bracket with .218 diameter mounting holes
     (F) Backstop style: A - Adjustable, F - Fixed
[11] Suffixes denote the following:

     (A) Body style:

         1  - Large seat  - .406 diameter orifice

         2  - Small seat  - .222 diameter orifice

         3  - Medium seat - .302/.320 diameter orifice

         4  - Medium seat - .302/.320 diameter orifice

         5  - Medium seat - .302/.320 diameter orifice

         6  - Medium seat - .302/.320 diameter orifice

         7  - Large seat  - .406 diameter orifice

         8  - Large seat  - .406/.470 diameter orifice

         9  - Medium seat - .302 diameter orifice

         10 - Large seat  - .406 diameter in-line ports

     (C) Vent: A - Vent (denotes vent for water only applications), S - Vent tube,

         V - Vent, X - No vent

     (D) Coil options:

         1 -  24 VAC coil assembly for adjustable backstop unit

         2 - 120 VAC coil assembly for adjustable backstop unit

         3 - 240 VAC coil assembly for adjustable backstop unit

         4 -  24 VAC coil assembly for fixed backstop unit

         5 - 120 VAC coil assembly for fixed backstop unit

         6 - 240 VAC coil assembly for fixed backstop unit

         7 - Special coil assembly for adjustable backstop unit

         8 - Special coil assembly for fixed backstop unit

     (E) Terminal position: D - Down, S - Straight, U - Up    

     (F) Terminal position relative to side port: B - Back, F - Front, L - Left, R - Right

     (G) Mounting bracket:

         1 - Flat bracket

         2 - 90° bracket with .312 diameter mounting holes

         3 - Flat bracket with 8-32 mounting holes

         4 - Extra long 90° bracket with 6-32 mounting holes

         5 - Extra long 90° bracket with .180 diameter mounting holes

         6 - Special 90° bracket with .312 diameter mounting holes

         7 - 90° bracket with .218 diameter mounting holes

         9 - 90° bracket with .109 radius slots

         X - 90° bracket with .281 diameter mounting holes

     (H) Bracket location relative to side port: B - Back, F - Front, L - Left, R - Right,

         X - No orientation

     (J) Flow type: 

         Blank space - Normally closed 

         NO - Normally open 

         J  - C-Fram w/.250 Q.C. Terminal 

         K  - Sq. Coil w/.250 Q.C. Terminal 

         L  - Sq. Coil: DIN 43650 Connector 

         M  - Sq. Coil: Deutcsh Connector 

         N  - Sq. Coil: Lead Wires
[12] Suffixes denote the following:
     (A) Indicates orifice size, inlet, and outlet port style:
         1 - 0.500 in ID Seat; Inlet Q/D - Outlet  B, 0.437 in 
         2 - 0.500 in ID Seat; Inlet Q/D - Outlet  Q/D, 0.437 in
         3 - 0.500 in ID Seat; Inlet N - Outlet  B, 0.312 in 	
         4 - 0.500 in ID Seat; Inlet S - Outlet  B, 0.312in 	
         5 - 0.500 in ID Seat; Inlet S - Outlet  B, 0.312 in 	    6 - 0.500 in ID Seat; Inlet
     Q/D - Outlet  B, 0.312 in
         7 - 0.500 in ID Seat; Inlet N - Outlet  B, 0.437 in 
         8 - 0.500 in ID Seat; Inlet H - Outlet  Q/D, 0.437 in 	
         9 - 0.452 in ID Seat; Inlet H - Outlet  H, 0.587 in 	
         Note: B - Barbed port, H - Hose port, N - 1/4" NPTF port, Q/D = Quick disconnect
     port, S - Straight port
     (B) Body material: L - Noryl, N - Nylon, P - Polysulfone
     (c) Diaphragm material: E - EPDM, S - Silicone
     (D) Vent options: V - Vent, X - No vent
     (E) Coil voltage: XXXAJ - AC Input, XXXLN - DC Input
[13] Suffixes denote the following: 
     (1) Coil voltage:
         12D  - 12 VDC 11 watts 1 minute on/1 minute off intermittent duty
         24D  - 24 VDC 11 watts 1 minute on/1 minute off intermittent duty
         36D  - 36 VDC 11 watts 1 minute on/1 minute off intermittent duty
         24A  - 24 VAC 50/60 Hz watts 1 minute on/1 minute off intermittent duty
         24E  - 24 VAC 50/60 Hz 14 watts (FWR) 1 minute on/ 1 minute off intermittent duty
         24F  - 24 VDC 16 watts 1 minute on/ 1 minute off intermittent duty
         100A - 100 VAC 50/60 Hz 12 watts 1 minute on/1 minute off intermittent duty
         120A - 120 VAC 50/50 Hz 12 watts 1 minute on/1 minute off intermittent duty
         120E - 120 VAC 50/60 Hz 14 watts (FWR) 1 minute on/1 minute off intermittent duty
         200A - 200 VAC 50/60 Hz 12 watts 1 minute on/1 minute off intermittent duty
         240A - 240 VAC 50/60 Hz 12 watts 1 minute on/1 minute off intermittent duty
         240E - 240 VAC 50/60 Hz 14 watts (FWR) 1 minute on/1 minute off intermittent duty
     (2) Valve type: A - Twist-lock with flow adjuster, B - Twist-lock without flow adjuster,
     
         C - Snap-lock with flow adjuster, D - Snap-lock without flow adjuster
     (3) Orifice diameter: S - Small orifice (.302 diameter), M - Medium orifice 
         (.330 diameter), L - Large orifice (.406 diameter)
[14] Suffixes denote the following:
     (1) Outlet type: R - Right angle barbed outlet, S - Straight barbed outlet,
         T - Threaded outlet
     (2) Coil voltage:
         1 - 110/120 VAC 50/60 Hz 
         2 - 220/240 VAC 50/60 Hz
         3 - 24 VAC 50/60 Hz
         4 - 24 VDC
     (3) Coil position relative to inlet:
         B - Back opposite of inlet
         F - Front in line with inlet
         L - Left of inlet
         R - Right of inlet
     (4) Flow rate: Maximum of three alphanumeric characters denoting flow rate (optional). 
         Flow rate is not always stated.
     (5) Inlet bracket: Maximum of two alphanumeric characters representing bracket selection.
[15] Suffixes denote the following:
     (1) Outlet type: R - Barbed, T - Threaded
     (2) Coil voltage: 1 - 120, 2 - 240, 3 - 24, 4 - Other
     (3) Coil position relative to inlet: B - Back, F - Front, L - Left, R - Right
     (4) Flow: Maximum of three alphanumeric characters
     (5) Inlet Bracket: Maximum of two alphanumeric characters representing bracket selection.
[16] Suffixes denote the following:
     (1) Outlet type: R - Right angle barbed outlet, S - Straight barbed outlet
     (2) Coil voltage:
         1 - 110/120 VAC 50/60 Hz 
         2 - 220/240 VAC 50/60 Hz
         3 - 24 VAC 50/60 Hz
         4 - 24 VDC
     (3) Coil position relative to inlet: B - Back opposite of inlet,
         F - Front in line with inlet
     (4) Flow rate: Maximum of three alphanumeric characters denoting flow rate (optional).
         Flow rate is not always stated.
     (5) Inlet bracket: Maximum of two alphanumeric characters representing bracket selection.

Proportional Solenoid Valve[18]
  DPV1N-NC-W-(1)-(2)-(3)
 
[18] (1) Coil voltage		
         12VDC - 012D		
         24VDC - 024D		
         36VDC - 036D			
     (2) Port fitting		
         Compression 5/16" [8mm] - C1		
         Compression 1/4"        - C2		
         Compression [6mm]       - C3				
     (3) Valve seat diameter		
         ø0.060 [1.5] - 060 (90 psi max)		
         ø0.075[1.9]  - 075 (65 psi max)		
         ø0.090 [2.3] - 090 (40 psi max)		

Proportional Valve[19]
  60098-60
 
[19] NSF Certified models begin with production date code 1109.


Number of matching Manufacturers is 1
Number of matching Products is 23
Processing time was 0 seconds