NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, October 22, 2017 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=14840&


NSF/ANSI 2
Food Equipment



 
E-Z Shelving Systems, Inc. 
5538 Merriam Drive
Merriam, KS 66203 
United States 
913-384-1331
Visit this company's website

Facility : Merriam, KS


Component Shelving Acceptable for Dry Storage and Heated Environments Only

"Knob Foot" Brackets, Electro-Zinc Plated (with clamps)[1]
  NSFB-K-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

"Knob" Brackets, Electro-Zinc Plated (with clamps)[1]
  NSB-K-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Brackets, Electro-Zinc Plated (with clamps)[1]
  NSB-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Ceiling Bracket, Electro-Zinc Plated (with clamps)[1]
  NSCB-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double "C" Bracket, Zinc Plated[1]
  NSDB/C-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double "Knob" Brackets, Electro-Zinc Plated (with clamps)[1]
  NSDB-K-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Brackets, Electro Zinc Plated (with clamps)[1]
  NSDB-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Foot "Knob" Brackets, Electro-Zinc Plated (with clamps)[1]
  NSDFB-K-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Foot Brackets, Electro Zinc Plated (with clamps)[1]
  NSDFB-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Knob "C" Bracket, Zinc Plated[1]
  NSDB-K/C-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Edge Strips, Galvanized[1]
  NSES-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Foot Brackets, Electro-Zinc Plated (with clamps)[1]
  NSFB-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Meat Rail Brackets, Electro-Zinc Plated[1]
  NSMB-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Meat Rail, Electro-Zinc Plated[1]
  NSMR (1/2" x 2" x length required)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Seismic Lips, Galvanized[1]
  NSSL-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelf Dividers, Galvanized[1]
  NSSD-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelves (Galvanized Steel)[1]
  NSGS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelves (Galvanized Steel, Flat-Louvered)[1]
  NSGSL-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Single "C" Bracket, Zinc Plated[1]
  NSB/C-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Single Knob "C" Bracket, Zinc Plated[1]
  NSB-K/C-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Uprights, Freestanding, Electro-Zinc Plated[1]
  NSFS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Uprights, Wall-Mounted, Electro-Zinc Plated[1]
  NSU-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Component Shelving Acceptable for All Environments (including Refrigerators, Freezers and Warewashing Areas)

"Knob" Brackets, Aluminum or Stainless Steel (with Clamps)[1]
  NSB-K/A-(1) (2)
  NSBSS-K-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

"Knob" Foot Brackets, Stainless Steel (with clamps)[1]
  NSFBSS-K-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Bracket, Aluminum (with Clamps)[1]
  NSB/A-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Brackets, Stainless Steel (with Clamps)[1]
  NSBSS-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Ceiling Bracket, Aluminum (with Clamps)[1]
  NSCB/A-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double "C" Bracket - Aluminum[1]
  NSDB/C/A-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double "C" Bracket - Stainless Steel[1]
  NSDBCSS- (1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double "Knob" Bracket, Aluminum or Stainless Steel (with clamps)[1]
  NSDB-K/A-(1)
  NSDBSS-K-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double "Knob" Foot Brackets, Stainless Steel (with clamps)
  NSDFBSS-K-(1)

Double Brackets, Aluminum or Stainless Steel (with Clamps)[1]
  NSDB/A-(1)
  NSDBSS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Foot Brackets, Stainless Steel (with clamps)[1]
  NSDFBSS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Knob "C" Bracket - Aluminum[1]
  NSDB-K/C/A-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Double Knob "C" Bracket - Stainless Steel
  NSDBCSS-K-(1)

Edge Strips, Aluminum or Stainless Steel[1]
  NSES/A-(1)
  NSES/SS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Foot Brackets, Stainless Steel (with clamps)[1]
  NSFBSS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Meat Hooks, Stainless Steel (4")
  NSMH

Seismic Lips, Aluminum or Stainless Steel[1]
  NSSL/A-(1)
  NSSL/SS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelf Dividers, Aluminum or Stainless Steel[1]
  NSSD/A-(1)
  NSSD/SS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelf, Aluminum or Stainless Steel[1]
  NSAS-(1)
  NSSS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelf, Aluminum, Flat-Louvered[1]
  NSASL-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Shelf, Stainless Steel, Flat-Louvered[1]
  NSSSL-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Single "C" Bracket - Aluminum[1]
  NSB/C/A-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Single "C" Bracket - Stainless Steel[1]
  NSBCSS- (1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Single Knob "C" Bracket - Aluminum[1]
  NSB-K/C/A-(1) (2)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Single Knob "C" Bracket - Stainless Steel
  NSBCSS-K-(1) (2)

Uprights, Freestanding, Aluminum[1]
  NSFS/A-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Uprights, Freestanding, Stainless Steel[1]
  NSFSSS-(1)
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.

Uprights, Wall-Mounted[1]
  NSU/A Aluminum
  NSUSS-(1) Stainless Steel
 
[1] (1) One, Two or Three digit numerical suffix indicating length or length x width in 
        inches.  Example:   NSGS 18X48                                                      
    
    (2) Single alphabetical digit indicating orientation of flange:  R= Right, L= Left.  
        Foot Brackets can be flipped to be used for Right or Left.


Number of matching Manufacturers is 1
Number of matching Products is 58
Processing time was 0 seconds