NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, December 08, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=002&Company=4R980&


NSF/ANSI 2
Food Equipment



Accurex 
P.O. Box 410
Schofield, WI 54476 
United States 
800-333-1400 

Facility : Kings Mountain, NC


Exhaust Hood[1] [2]
  XC-(1)-(2)-(3)-(4)
  XD1-(1)-(2)-(3)-(4)
  XD2-(1)-(2)-(3)-(4)
  XD3-(1)-(2)-(3)-(4)
  XO-(1)-(2)-(3)-(4)
 
[1] One letter designation: same material on exterior and interior surfaces.
    Two letter designation: first letter indicates interior material and second letter
    indicates exterior material.
[2] (1) Indicates length of hood in inches
    (2) Indicates material and finish: A - Aluminized steel, P - Coated, S - Stainless 
        steel
    (3) Any one or combination of the following colors accepted in splash or non-food 
        zones (hood exterior) only: White, Vermillion, International Orange, 
        Pale Blue, Gloss Black, Ivory, Lemon Yellow, and Orange.
    (4) Available with the following accessories: Enclosure Panels, Filler Panels, End
        Skirts, Backsplash Panels, and Heat Enclosures.

Utility Distribution System[4]
  XM(10)(11)-(12)
  XU(10)(11)-(12)
 
[4] (10) Available in the following styles:
         C - Chase only
         E - Electric pole
         I - Island
         O - Overhead
         U - Utility column     
         W - Wall
    (11) Available in the following configurations:
         B - Buss bar
         H - Horizontal cable
         N - None
         R - Receptacles only
         V - Vertical cable
    (12) Available with the following options:
         A - Air, compressed      
         C - Cold water
         D - Drain and vent
         F - Fire system     
         G - Gas
         H - Hot water
         K - Fan/hood controls 
         L - Chilled water
         M - Make-up air
         N - None
         O - Filtered water
         P - Prison package
         S - Steam/condensate return
         W - Water wash controls

Vent Hood - Custom Size[1] [3]
  X (6)(7)(8)(9)-(10)
  XB (1)-(2)-(3)-(4)-(5)-(6)
  XC (1)-(2)-(3)-(4)-(5)-(6)
  XG (1)-(2)-(3)-(4)-(5)-(6)
  XGH20 (1)-(2)-(3)-(4)-(5)-(6)
  XH (1)-(2)-(3)-(4)-(5)-(6)
  XHP (1)-(2)-(3)-(4)-(5)-(6)
  XK (1)-(2)-(3)-(4)-(5)-(6)
  XKP (1)-(2)-(3)-(4)-(5)-(6)
  XT (1)-(2)-(3)-(4)-(5)-(6)
  XV (1)-(2)-(3)-(4)-(5)-(6)
  XW (1)-(2)-(3)-(4)-(5)-(6)
  XX (1)-(2)-(3)-(4)-(5)-(6)
  XXP (1)-(2)-(3)-(4)-(5)-(6)
 
[1] One letter designation: same material on exterior and interior surfaces.
    Two letter designation: first letter indicates interior material and second letter
    indicates exterior material.
[3] (1)  Available with the following suffixes:
         A      - Air curtain style
         C      - Face and air curtain style
         D      - Double wall style
         E      - Straight exhaust
         F      - Face style
         O      - Round or oval style
         R      - R type short circuit
         S      - Short circuit style
    (2)  Indicates the location type:
         D      - Double island style
         P      - Proximity style
         P-FB   - Flue bypass
         P-L    - Low proximity
         T      - Taper style
         V or R - V. Bank island style    
         W      - Wall style
         X      - U.L. Listed
    (3)  Indicates length of hood in inches
    (4)  Indicates material and finish: A - Aluminized steel, S - Stainless steel
    (5)  Available with the following accessories: Enclosure Panels, Filler Panels, End
         Skirts, Backsplash Panels, and Heat Enclosures.
    (6)  Style.  W - Wall Canopy, I - Island Canopy, P - Low Proximity				
    (7)  Filter Cleaning. M - Manual Clean, A - Auto Clean	
    (8)  MUA Configuration.  S - Short Circuit, R - Short Circuit Registers, 
         F - Perforated Face Supply, C - Combination Integral Air Curtain and Face 
         Discharge, E - Exhaust Only				
    (9)  Filter Type.  B - Baffle, X - X-Tractor, E - Energy Recovery, G - Grease 
         Grabber (dual), K - Cartridge
    (10) Front Height.  30 - 30” High, 24 - 24” High, 18 - 18” High Taper, 
         15 - 15” High Taper, 12 - 12” High Taper


Facility : Tulsa, OK


Exhaust Hood[1] [2]
  XC-(1)-(2)-(3)-(4)
  XD1-(1)-(2)-(3)-(4)
  XD2-(1)-(2)-(3)-(4)
  XD3-(1)-(2)-(3)-(4)
  XO-(1)-(2)-(3)-(4)
 
[1] One letter designation: same material on exterior and interior surfaces.
    Two letter designation: first letter indicates interior material and second letter
    indicates exterior material.
[2] (1) Indicates length of hood in inches
    (2) Indicates material and finish: A - Aluminized steel, P - Coated, S - Stainless 
        steel
    (3) Any one or combination of the following colors accepted in splash or non-food 
        zones (hood exterior) only: White, Vermillion, International Orange, 
        Pale Blue, Gloss Black, Ivory, Lemon Yellow, and Orange.
    (4) Available with the following accessories: Enclosure Panels, Filler Panels, End
        Skirts, Backsplash Panels, and Heat Enclosures.

Utility Distribution System[4]
  XM(10)(11)-(12)
  XU(10)(11)-(12)
 
[4] (10) Available in the following styles:
         C - Chase only
         E - Electric pole
         I - Island
         O - Overhead
         U - Utility column     
         W - Wall
    (11) Available in the following configurations:
         B - Buss bar
         H - Horizontal cable
         N - None
         R - Receptacles only
         V - Vertical cable
    (12) Available with the following options:
         A - Air, compressed      
         C - Cold water
         D - Drain and vent
         F - Fire system     
         G - Gas
         H - Hot water
         K - Fan/hood controls 
         L - Chilled water
         M - Make-up air
         N - None
         O - Filtered water
         P - Prison package
         S - Steam/condensate return
         W - Water wash controls

Vent Hood - Custom Size[1] [3]
  X (6)(7)(8)(9)-(10)
  XB (1)-(2)-(3)-(4)-(5)-(6)
  XC (1)-(2)-(3)-(4)-(5)-(6)
  XG (1)-(2)-(3)-(4)-(5)-(6)
  XGH20 (1)-(2)-(3)-(4)-(5)-(6)
  XH (1)-(2)-(3)-(4)-(5)-(6)
  XHP (1)-(2)-(3)-(4)-(5)-(6)
  XK (1)-(2)-(3)-(4)-(5)-(6)
  XKP (1)-(2)-(3)-(4)-(5)-(6)
  XT (1)-(2)-(3)-(4)-(5)-(6)
  XV (1)-(2)-(3)-(4)-(5)-(6)
  XW (1)-(2)-(3)-(4)-(5)-(6)
  XX (1)-(2)-(3)-(4)-(5)-(6)
  XXP (1)-(2)-(3)-(4)-(5)-(6)
 
[1] One letter designation: same material on exterior and interior surfaces.
    Two letter designation: first letter indicates interior material and second letter
    indicates exterior material.
[3] (1)  Available with the following suffixes:
         A      - Air curtain style
         C      - Face and air curtain style
         D      - Double wall style
         E      - Straight exhaust
         F      - Face style
         O      - Round or oval style
         R      - R type short circuit
         S      - Short circuit style
    (2)  Indicates the location type:
         D      - Double island style
         P      - Proximity style
         P-FB   - Flue bypass
         P-L    - Low proximity
         T      - Taper style
         V or R - V. Bank island style    
         W      - Wall style
         X      - U.L. Listed
    (3)  Indicates length of hood in inches
    (4)  Indicates material and finish: A - Aluminized steel, S - Stainless steel
    (5)  Available with the following accessories: Enclosure Panels, Filler Panels, End
         Skirts, Backsplash Panels, and Heat Enclosures.
    (6)  Style.  W - Wall Canopy, I - Island Canopy, P - Low Proximity				
    (7)  Filter Cleaning. M - Manual Clean, A - Auto Clean	
    (8)  MUA Configuration.  S - Short Circuit, R - Short Circuit Registers, 
         F - Perforated Face Supply, C - Combination Integral Air Curtain and Face 
         Discharge, E - Exhaust Only				
    (9)  Filter Type.  B - Baffle, X - X-Tractor, E - Energy Recovery, G - Grease 
         Grabber (dual), K - Cartridge
    (10) Front Height.  30 - 30” High, 24 - 24” High, 18 - 18” High Taper, 
         15 - 15” High Taper, 12 - 12” High Taper


Number of matching Manufacturers is 1
Number of matching Products is 42
Processing time was 0 seconds