NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, October 23, 2018 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?Standard=003&Company=C0026906&


NSF/ANSI 3
Commercial Warewashing Equipment

Racks per Hour / Dishes per Hour / Water Consumption Calculations

For informational purposes, the estimated racks per hour or dishes per hour for NSF/ANSI 3 Certified dishwashers can be calculated as follows:

Racks per Hour for Stationary Rack Dishwashers = 3600(NR) / TC

Racks per Hour for Rack Conveyor Dishwashers = (CS)(60) / RL

Dishes per Hour for Rackless Conveyor Dishwashers = (120)(CS)(CW) / PD

Water Consumption (gallons per hour) for Stationary Rack Dishwashers = (GPC)(RPH)

Water Consumption (gallons per hour) for Conveyor Dishwashers = (GPM)(60)

Where: CS = Conveyor speed measured in feet per minute
              CW = Conveyor width measured in inches
              GPC = Gallons per cycle
              GPM = Gallons per minute
              NR = Number of racks the dishwasher is designed to hold per cycle
              PD = Distance between pegs measured in inches, center to center of the peg, in the direction of conveyor travel
              RL = Length of the rack measured in feet
              RPH = Racks per hour
              TC = Total cycle time measured in seconds

The total cycle time includes wash, rinse, dwell, and load times. Load times will vary depending on the type of dishwasher. Estimated load times commonly used for specific types of dishwashers are as follows:
door type (straight thru) - 5 seconds
door type (corner) - 7 seconds
hood type - 8 seconds
front opening type - 30 seconds



 
Insinger Machine Company (The) 
6245 State Road
Philadelphia, PA 19135 
United States 
215-624-4800

Facility : # 2 USA


STATIONARY RACK POT, PAN, AND UTENSIL WASHING MACHINES
      Final Rinse    
      (20 psi) Operating Time  
  Model Rack Size Flow Usage (seconds) Footnotes
  Number Width gpm gph Wash Rinse Dwell  

Single Tank Stationary Rack - Hot Water Sanitizing [8]
  SW-12-C 28x29  4.5   49.5   180   60   19   [1]
  SW-12-F 28x29  4.5   49.5   180   60   19   [1] [2]
  SW-12-P 28x29  4.5   49.5   180   60   19   [1]
  SW-14-F 31.5x37  5.0   65   180   60   18   [1] [2]
  SW-14-P 31.5x37  5.0   65   180   60   18   [1]
  SW-25-F 26x29  7.1   94.6   180   40   20   [6] [7]
  SW-36-F 33x73  16.2   162   180   40   18   [1] [4]
  SW-48-RI 45x75  14   168   180   60   30   [1] [3]
  SW-78-RI 2*33x70  26   311   180   60   30   [5] [6]
 
[1] May or may not contain a suffix:
    E - Electric
    G - Gas
    S - Steam
[2] Available options: Rack Hanger
[3] Beginning with serial number 4xxx-xxxx-4000
[4] Beginning with serial number 6xxx-xxxx-1701
[5] Beginning with serial number 5xxx-xxxx-0050
[6] May or may not contain a suffix:
    E  - Electric
    G  - Gas
    RS - Recirculating steam
    S  - Steam
[7] Beginning with serial number 7xxx-xxxx-2935
[8] Wash arm assemblies may have alternate assemblies utilizing plastic plugs and different
    cleaning procedures.


Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds