NSF Product and Service Listings

These NSF Official Listings are current as of Friday, April 19, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?


NSF/ANSI 2
Food Equipment



 
A+ Fabrication & Custom Metal Works 
1120 Oakes
San Angelo, TX 76903 
United States 
325-482-0910

Facility : San Angelo, TX


Equipment custom built in compliance with NSF Standard 2‡

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.



 
A.I.S., Inc. 
4300 South Station Master Drive
Tucson, AZ 85714 
United States 
520-882-0233

Facility : Tucson, AZ


Custom Cabinet

Custom Dishtable

Custom Hood

Custom Pot Rack

Custom Sink

Custom Table



 
AA Cater Truck 
750 East Slauson Avenue
Los Angeles, CA 90011 
United States 
800-729-7390 
323-235-6650
Visit this company's website

Facility : Los Angeles, CA


Hand Sink
  NA01300
  NRA01300

Hood
  NAA-6-(1)
  NRAA-6-(1)

Sink
  A014CS01

Three-Compartment Sink
  NA01400
  NRA01400

Shelving Acceptable for Dry Storage and Heated Environments Only

Shelving Units
  NA07100
  NA07200
  NA07500
  NRA07100
  NRA07200
  NRA07500

[1] (1) is a two-digit suffix indicating unit length in inches.


 
ABC 
200 West 22nd Street
Suite 200 
Lombard, IL 60148 
United States 
630-963-9601

Facility : # 3 India


Bain Marie Pot
  BMP-1-P
  BMP-2-P
  BMP-3-P
  BMP-4-P
  BMP-6-P
  BMP-8-P
  BMP-12-P

Cover for Bain Marie Pot
  BMC-1-P
  BMC-2-P
  BMC-3-P
  BMC-4-P
  BMC-6-P
  BMC-8-P
  BMC-12-P

Mixing Bowl
  APAN-01-P
  MBH-1-P
  MBH-02-P
  MBH-03-P
  MBH-04-P
  MBH-05-P
  MBH-06-P
  MBH-8-P
  MBH-10-P
  MBH-13-P
  MBH-15-P
  MBH-16-P
  MBH-20-P
  MBH-30-P
  MBH-75-P

Pom Tong
  PTH-06
  PTH-09
  PTH-12

Portion Controller/Measure Mizer Spoodle
  PPG-1-P
  PPG-1-S
  PPG-2-P
  PPG-2-S
  PPG-3-P
  PPG-3-S
  PPG-4-P
  PPG-4-S
  PPG-6-P
  PPG-6-S
  PPG-8-P
  PPG-8-S

Stainless Steel Basting Spoon
  BSH-11-L-P
  BSH-11-P-P
  BSH-11-S-P
  BSH-13-L-P
  BSH-13-P-P
  BSH-13-S-P
  BSH-15-L-P
  BSH-15-P-P
  BSH-15-S-P
  BSH-18-L-P
  BSH-18-P-P
  BSH-18-S-P
  BSH-21-L-P
  BSH-21-P-P
  BSH-21-S-P

Stainless Steel Champagne Bucket
  WBK-8P

Stainless Steel Cocktail Shaker
  CS-8-P
  CS-16-P
  CS-30-P

Stainless Steel Flat Bottom Ladle
  LF-02
  LF-03
  LF-04
  LF-05
  LF-06
  LF-07
  LF-08

Stainless Steel Jigger
  JIG-01-P
  JIG-02-P
  JIG-03-P
  JIG-05-P
  JIG-06-P
  JIG-08-P

Stainless Steel Ladle
  LL-01-P
  LL-02-P
  LL-03-P
  LL-04-P
  LL-05-P
  LL-06-P
  LL-07-P
  LL-08-P
  LL-12-P
  LL-16-P
  LL-50-P

Stainless Steel Malt Cup
  MC-01-P

Stainless Steel Mixing Paddle
  SP-24-S
  SP-30-S
  SP-36-S
  SP-42-S
  SP-48-S
  SP-54-S
  SP-60-S

Stainless Steel Oval Au Gratin Dish
  AGO-08-P
  AGO-12-P
  AGO-15-P
  AGO-20-P

Stainless Steel Round Au Gratin Dish
  AGR-06-P
  AGR-08-P
  AGR-10-P

Stainless Steel Sauce Cup
  SC-1.5
  SC-2.5

Stainless Steel Scoop
  SC-5

Stainless Steel Twisted Bar Spoon
  BRS-10-P
  BRS-11-P
  BRS-12-P

Steam Table Insert
  STI-5-P
  STI-6-1/2-P
  STI-8-1/2-P
  STI-10-1/2-P

Turner
  WFT-14
  WFT-14P



 
ABC Restaurant Equipment Company 
2025 N. Lee Avenue
So. El Monte, CA 91733 
United States 
626-442-1821

Facility : So. El Monte, CA


Custom Dishtable

Custom Sink

Custom Worktable

COMPONENTS:

Custom Undercounter Refrigerator - Remote



 
Abdulaziz AlRaqtan & Partners Co. for Trading and Industry 
Dammam-Khobar Highway Al Khobar
31952 Al Khobar 
Kingdom of Saudi Arabia 
Saudi Arabia 
966 1 385 75500
Visit this company's website

Facility : # 1 Industrial City 2, Dammam, Saudi Arabia


Cabinet - Standard Series[1]
  S(1)(2)(3)(4)(5)(6)
 
[1] (1) Cabinet type: 
        BS - Base cabinet
        WC - Wall cabinet			
    (2) 2 digits indicating length			
    (3) 2 digits indicating width			
    (4) 2 digits indicating height			
    (5) Backsplash type: 
        BS40 - 40 thickness backsplash 45°
        Empty=island cabinet			
    (6) Options: 
        C - caster
        M - mid shelf
        S - sliding door
        W - swing door
        Empty - open

Exhaust Hood[2]
  S(1)(2)(3)50
 
[2] (1) DW - Double skin wall type
        DI - Double skin island type
        SW - Single skin wall type
        SI - Single skin island type
    (2) 3 digits indicating length			
    (3) 3 digits indicating width			
        50 - Height			
    

Inlet Table - Standard Series[3] [4]
  SIT(1)(2)90(BS40)(3)(4)
 
[3] (1) 2 digits indicating length
    (2) 2 digits indicating width
    (3) Options:
        B - Bracing, 1 digit indicating number of sinks
        C - Sink cover
        G - Garbage chute
        P - Perforated sink
        S - Under shelf 
    (4) Flow: 
        L - Left to right
        R - Right to left
[4] Units certified starting from serial number 1708240005900.

Outlet Table - Standard Series[4] [5]
  SOT(1)(2)90(BS40)(3)(4)
 
[4] Units certified starting from serial number 1708240005900.
[5] (1) 2 digits indicating length
    (2) 2 digits indicating width
    (3) Options: 
        S - Under shelf
        B - Bracing
    (4) Flow: 
        L - Left to right
        R - Right to left

Rack shelves for Tables - Standard Series[4] [6]
  S(1)(2)(3)(4)
 
[4] Units certified starting from serial number 1708240005900.
[6] (1) Shelf type: 
        RT - Top mount
        RW - Wall mount
    (2) 2 digits indicating length
    (3) 2 digits indicating width
    (4) 2 digits indicating height

Sink Table - Standard Series[7]
  S(1)(2)(3)(4)90(5)(6)
 
[7] (1) Type of sink: 
        MS - Marine Edge
        RR - Raised and Rolled
    (2) Number of sink: 
        1 - single sink 
        2 - Two sink
        3 - three sink	
    (3) 2 digits indicating length			
    (4) 2 digits indicating width			
        90 - height			
    (5) Backsplash type: BS40 - 40mm backsplash 45°			
    (5) Backsplash type: BS50 - 50mm backsplash 45°			
    (6) Options: 
        C - sinkcover
        G - garbage chute
        L - left drainboard
        M - middle sinks
        P - perforated sink
        R - right drainboard
        S - undershelf

Top Mounted Shelves for All Environments - Standard Series[8]
  S(1)(2)(3)(4)(5)
 
[8] (1) Shelf type: 
        OS - Top mounted shelves			
        SS - Wall mount solid shelves
    (2) 2 digits indicating length			
    (3) 2 digits indicating width			
    (4) 2 digits indicating height			
    (5) Number of tier type: 
        A - Angle
        B - Back mount
        S - Sleeves 
        1 - Single tier 
        2 - Two tier			

Work Tables - Standard Series[9]
  S(1)(2)(3)90(4)(5)
 
[9] (1) Worktable type: 
        FS - Filler Worktable
        TS - Worktable
    (2) 2 digits indicating length
    (3) 2 digits indicatig width
    (4) Backsplash type: 
        BS40  - 40 thickness basksplash 45°
        Empty - island worktable
    (5) Options:
        B - Bracing open front 
        D - mid & bottom shelf
        L - R Bracing L/R (for 3 legs)
        S - under shelf
    



 
Above All Lighting Inc. 
1501 Industrial Way North
Toms River, NJ 08755 
United States 
866-222-8866
Visit this company's website

Facility : # 1 China


COMPONENTS:

Light Fixtures for Splash and Non-Food Zones
  VP06D24(1)1-(2)
  VP12D40(1)1-(2)-(3)
  VP24D100(1)1-(2)

[1] (1) Color temperature
        27    - 2700K
        30    - 3000K
        40    - 4000K
        50    - 5000K
        57    - 5700K
    (2) Lens type 
        blank - Frosted lens
        C     - Clear lens
    (3) Emergency
        blank - Normal
        EBU   - Emergency driver


 
Acabados y Procesos Industriales, S.A. 
9 na. calle 2-59 zona 3 de Mixco
Lotificación El Rosario 
Mixco 01057 
Guatemala 
502 2485 7700

Facility : Mixco, Guatemala


Custom Organizer Shelf Acceptable for All Environments (including Refrigerators, Freezers, and Warewashing Areas)

Custom Organizer Shelf

Custom Wire Shelving Acceptable for All Environments (including Refrigerators, Freezers and Warewashing Areas)

Custom Wire Shelf



Accurex 
P.O. Box 410
Schofield, WI 54476 
United States 
800-333-1400 

Facility : Kings Mountain, NC


Exhaust Hood[1] [2]
  XC-(1)-(2)-(3)-(4)
  XD1-(1)-(2)-(3)-(4)
  XD2-(1)-(2)-(3)-(4)
  XD3-(1)-(2)-(3)-(4)
  XO-(1)-(2)-(3)-(4)
 
[1] One letter designation: same material on exterior and interior surfaces.
    Two letter designation: first letter indicates interior material and second letter
    indicates exterior material.
[2] (1) Indicates length of hood in inches
    (2) Indicates material and finish: A - Aluminized steel, P - Coated, S - Stainless 
        steel
    (3) Any one or combination of the following colors accepted in splash or non-food 
        zones (hood exterior) only: White, Vermillion, International Orange, 
        Pale Blue, Gloss Black, Ivory, Lemon Yellow, and Orange.
    (4) Available with the following accessories: Enclosure Panels, Filler Panels, End
        Skirts, Backsplash Panels, and Heat Enclosures.

Utility Distribution System[4]
  XM(10)(11)-(12)
  XU(10)(11)-(12)
 
[4] (10) Available in the following styles:
         C - Chase only
         E - Electric pole
         I - Island
         O - Overhead
         U - Utility column     
         W - Wall
    (11) Available in the following configurations:
         B - Buss bar
         H - Horizontal cable
         N - None
         R - Receptacles only
         V - Vertical cable
    (12) Available with the following options:
         A - Air, compressed      
         C - Cold water
         D - Drain and vent
         F - Fire system     
         G - Gas
         H - Hot water
         K - Fan/hood controls 
         L - Chilled water
         M - Make-up air
         N - None
         O - Filtered water
         P - Prison package
         S - Steam/condensate return
         W - Water wash controls

Vent Hood - Custom Size[1] [3]
  X (6)(7)(8)(9)-(10)
  XB (1)-(2)-(3)-(4)-(5)-(6)
  XC (1)-(2)-(3)-(4)-(5)-(6)
  XG (1)-(2)-(3)-(4)-(5)-(6)
  XGH20 (1)-(2)-(3)-(4)-(5)-(6)
  XH (1)-(2)-(3)-(4)-(5)-(6)
  XHP (1)-(2)-(3)-(4)-(5)-(6)
  XK (1)-(2)-(3)-(4)-(5)-(6)
  XKP (1)-(2)-(3)-(4)-(5)-(6)
  XT (1)-(2)-(3)-(4)-(5)-(6)
  XV (1)-(2)-(3)-(4)-(5)-(6)
  XW (1)-(2)-(3)-(4)-(5)-(6)
  XX (1)-(2)-(3)-(4)-(5)-(6)
  XXP (1)-(2)-(3)-(4)-(5)-(6)
 
[1] One letter designation: same material on exterior and interior surfaces.
    Two letter designation: first letter indicates interior material and second letter
    indicates exterior material.
[3] (1)  Available with the following suffixes:
         A      - Air curtain style
         C      - Face and air curtain style
         D      - Double wall style
         E      - Straight exhaust
         F      - Face style
         O      - Round or oval style
         R      - R type short circuit
         S      - Short circuit style
    (2)  Indicates the location type:
         D      - Double island style
         P      - Proximity style
         P-FB   - Flue bypass
         P-L    - Low proximity
         T      - Taper style
         V or R - V. Bank island style    
         W      - Wall style
         X      - U.L. Listed
    (3)  Indicates length of hood in inches
    (4)  Indicates material and finish: A - Aluminized steel, S - Stainless steel
    (5)  Available with the following accessories: Enclosure Panels, Filler Panels, End
         Skirts, Backsplash Panels, and Heat Enclosures.
    (6)  Style.  W - Wall Canopy, I - Island Canopy, P - Low Proximity				
    (7)  Filter Cleaning. M - Manual Clean, A - Auto Clean	
    (8)  MUA Configuration.  S - Short Circuit, R - Short Circuit Registers, 
         F - Perforated Face Supply, C - Combination Integral Air Curtain and Face 
         Discharge, E - Exhaust Only				
    (9)  Filter Type.  B - Baffle, X - X-Tractor, E - Energy Recovery, G - Grease 
         Grabber (dual), K - Cartridge
    (10) Front Height.  30 - 30” High, 24 - 24” High, 18 - 18” High Taper, 
         15 - 15” High Taper, 12 - 12” High Taper



 
Ace Mart 
No. 352 Industrial Avenue
Dongcheng Town, Yangdong Country 
YangJiang 
China 
86 662 2277088
Visit this company's website

Facility : Yangjiang, Guangdong, China


Val-U Line
  30500
  30501
  30502
  30503
  30504



 
Ace Mart Restaurant Supply 
2653 Austin Highway
San Antonio, TX 78218 
United States 
888-223-6278 
210-323-4425

Facility : # 1 Taiwan


Cutting Board
  CBBLH-1218
  CBBLH-1520
  CBBLH-1824
  CBBRH-1218
  CBBRH-1520
  CBBRH-1824
  CBGRH-1218
  CBGRH-1520
  CBGRH-1824
  CBH-1218
  CBH-1520
  CBH-1824
  CBREH-1218
  CBREH-1520
  CBREH-1824
  CBYEH-1218
  CBYEH-1520
  CBYEH-1824
  UPDBBL-1520
  UPDBBL-1824
  UPDCB1218
  UPDCB1520
  UPDCB1824
  UPDCBBL-1218
  UPDCBBR-1218
  UPDCBBR-1520
  UPDCBBR-1824
  UPDCBGR-1218
  UPDCBGR-1520
  UPDCBGR-1824
  UPDCBRE-1218
  UPDCBRE-1520
  UPDCBRE-1824
  UPDCBYE-1218
  UPDCBYE-1520
  UPDCBYE-1824



 
Ace Mart Restaurant Supply 
2653 Austin Highway
San Antonio, TX 78218 
United States 
210-683-7819
Visit this company's website

Facility : # 1 China


Ingredient Bin
  CHEFIB400
  CHEFIB500
  CHFEIB100
  CHFEIB200
  CHFEIB42

Insulated Containers for Packaged Food Only
  CTSPC-FL

Plastic Storage Container with Lid
  CHEFFSC12CLR
  CHEFFSC12WHT
  CHEFFSC18CLR
  CHEFFSC18WHT
  CHEFFSC22CLR
  CHEFFSC22WHT
  CHEFFSC2CLR
  CHEFFSC2WHT
  CHEFFSC4CLR
  CHEFFSC4WHT
  CHEFFSC6CLR
  CHEFFSC6WHT
  CHEFFSC8CLR
  CHEFFSC8WHT

Polycarbonate Food Pan
  CHEFPFP1-2C
  CHEFPFP1-4C
  CHEFPFP1-6C
  CHEFPFP2-2C
  CHEFPFP2-4C
  CHEFPFP2-6C
  CHEFPFP3-2C
  CHEFPFP3-4C
  CHEFPFP3-6C
  CHEFPFP4-2C
  CHEFPFP4-4C
  CHEFPFP4-6C
  CHEFPFP6-2C
  CHEFPFP6-4C
  CHEFPFP6-6C
  CHEFPFP9-2C
  CHEFPFP9-4C

COMPONENTS:

Polycarbonate Cover for Food Pan
  CHEFPFPL1
  CHEFPFPL1SLT
  CHEFPFPL2
  CHEFPFPL2SLT
  CHEFPFPL3
  CHEFPFPL3SLT
  CHEFPFPL4
  CHEFPFPL4SLT
  CHEFPFPL6
  CHEFPFPL6SLT



 
ACME Plastics, Inc. 
220 Browertown Road
West Paterson, NJ 07424 
United States 
800-234-1991 
973-868-9113

Facility : # 1 Taiwan


Serving and Display Ware

12" Round Pastry Case
  SKU# 184154[1]
 
[1] Available in beige.

12" x 14" Pastry Case
  SKU# 184153[1]
 
[1] Available in beige.

6" x 14" Pastry Case
  SKU# 184152[1]
 
[1] Available in beige.

6" x 14" Trim Platter
  SKU# 186460

7.5" Melamine Plate
  SKU # 011037831[2]
  SKU# 011010805[1]
 
[1] Available in beige.
[2] Available in white.

Melamine Ramekin
  SKU # 011037829[2]
  SKU# 011001060
 
[2] Available in white.

Platter 12" Round Holiday FY05
  SKU #187933

Platter 6" x 14" Holiday FY05
  SKU #187932

Platter 6" x 14" RED HOL07 RNA/LS
  SKU# 257048[3]
 
[3] Available in light red, dark red or roma red.

Platter 6" x 14" Red HOL06 LS
  SKU# 192347[3]
 
[3] Available in light red, dark red or roma red.

Platter 6" x 14" Red HOL06 RNA
  SKU# 192297[3]
 
[3] Available in light red, dark red or roma red.

Rectangular Tray 12" x 14"[2]
  SKU # 011033342
 
[2] Available in white.

Rectangular Tray 6" x 14"[2]
  SKU # 011033341
 
[2] Available in white.

Small Rectangular Melamine Platter 5.25" x 6.5"
  SKU # 011037830[2]
  SKU# 011010875[1] [4]
 
[1] Available in beige.
[2] Available in white.
[4] Available in red.


Facility : # 3 Taiwan


Cake Plate Riser
  SKU # 011033340

Cooling Rack
  SCI-011024038

Metal Ring Riser
  SKU # 011033337

Scalloped Baking Pan Narrow
  SKU # 011033332

Sign Holder Bakery
  SKU# 011006926
  SKU# 011046570

Spoon
  SKU # 011060810
  SKU # 011060811

Wire Rack
  SCI-011024039


Facility : # 4 Taiwan


Serving and Display Ware

Food Display Pedestal
  SKU # 011042217
  SKU # 011042218
  SKU # 011042219

Sigh Holder: 1.5" x 3" Pastry Case
  SKU# 184155

Tazo Tea Container
  SKU# 011004731


Facility : Tianan City, Taiwan


Two Tier Riser
  SKU 011051749

Two Tier Riser Shelf[1]
  SKU 011051750
 
[1] Shelf model comes in 7 x 14 inch or 9 x 14 inch size.

Serving and Display Ware

Oatmeal Bowl
  SKU # 11024033

Oatmeal Topping Dish
  SKU # 11024034

Ring Riser
  SKU # 11023677



 
Acme United Corporation DBA Clauss 
60 Roundhill Road
Fairfield, CT 06824 
United States 
203-322-4142

Facility : Guangdong, China


Titanium Dough Cutter/Scraper
  18743

Titanium Knife
  18411
  18412
  18413
  18414
  18416
  18417
  18428
  18452
  18558
  18665
  18744
  18745
  18746
  18747
  18748
  18749



 
Acos Macom Indústria e Comércio Ltda. 
Av. Jaraguá, nº 77, Cumbica
Guarulhos, São Paulo 07221-050 
Brazil 
55 11 2085 7000
Visit this company's website

Facility : São Paulo, Brazil


Bagging Station
  MCD-11-071

Breakfast Table[1]
  MCD-11-102
 
[1] NSF Certified production beginning 11/14/2011.

Bun Cart[1]
  MCD-11-103
 
[1] NSF Certified production beginning 11/14/2011.

HD UHC Table 51"[1]
  MCD-11-131
 
[1] NSF Certified production beginning 11/14/2011.

Heating Corner Table[1]
  MCD-11-142
 
[1] NSF Certified production beginning 11/14/2011.

Oat Expediter Assembly[1]
  MCD-11-151
  MCD-11-152
  MCD-11-154
 
[1] NSF Certified production beginning 11/14/2011.

Toaster and Steamer Table[1]
  MCD-11-101
 
[1] NSF Certified production beginning 11/14/2011.



 
Acuity Brands Lighting Inc, DBA Lithonia Lighting 
1400 Lester Road
Conyers, GA 30012 
United States 
770-593-5092
Visit this company's website

Facility : # 1 China


LED Highbay for Splash Zone
  JEBL 12L
  JEBL 12L HVOLT
  JEBL 18L
  JEBL 18L HVOLT
  JEBL 24L
  JEBL 24L HVOLT
  JEBL 30L
  JEBL 30L HVOLT



 
AcuRite, Division of Chaney Instruments 
965 Wells Street
Lake Geneva, WI 53147 
United States 
262-248-4449

Facility : Zhejiang, China


Candy / Deep Fry Thermometer
  00287E, 100ºF to 500ºF
  00699, 275°F to 400°F
  00723, 100°F to 350°F
  00723A1 / 00723A1DIX, 100°F to 350°F
  00723W, 100°F to 350°F
  00723W1, 100°F to 400°F
  00723W2,100°F to 400°F
  03108, 200°F to 400°F
  03108SCB, 200°F to 400°F

Digital Meat Thermometer[1]
  00295, 32°F to 392°F (0°C to 200°C)
  00641W2, 32°F to 392°F (0°C to 200°C)
  00641W3, 32°F to 392°F (0°C to 200°C)
  00641W4,32°F to 392°F (0°C to 200°C)
  00645W3, 32°F to 392°F (0°C to 200°C)
  00665A1DIX , -40°F to 450°F (-40°C to 232°C)
  00665DIX, -40°F to 450°F (-40°C to 232°C)
  00681, 32°F to 392°F (0°C to 200°C)
  00681A3, 32°F to 392°F (0°C to 200°C)
  00681A3DIX, 32°F to 392°F (0°C to 200°C)
  00681A4, 32°F to 392°F (0°C to 200°C)
  00681A4DIX, 32°F to 392°F (0°C to 200°C)
 
[1] 0641W2 and 00645W3 are identical products bearing   different model numbers due to
    distribution need.  00681A3 and 00681A3DIX are identical products bearing different
    model numbers due to distribution need.

Digital Refrigerator / Cooler Thermometer
  00290, -4°F to 158°F (-20°C to 70°C)
  00290DIX, -4°F to 158°F (-20°C to 70°C)

Digital Thermometer
  00274, -40ºF to 450ºF (-40ºC to 232ºC)
  00274A1, -40ºF to 450ºF (-40ºC to 232ºC)
  00274DIX, -40ºF to 450ºF (-40ºC to 232ºC)
  00284CS, -40ºF to 450ºF (-40ºC to 232ºC)
  00284CSA1, -40ºF to 450ºF (-40ºC to 232ºC)

Grill Surface Thermometer
  03118, 50°F to 600°F (10°C to 300°C)

Meat Thermometer
  00286DIX, 50-100°C
  00286E, 120°F to 220°F
  00665E, -40°F to 450°F(-40°C to 232°C)
  00665EA1, -40°F to 450°F(-40°C to 232°C)
  00665EA2,-40°F to 450°F (-40°C to 232°C)
  00680, 140°F to 190°F
  00709W, 145°F to 170°F
  00732A1, 120°F to 220°F
  00732W2, 120°F to 220°F
  00732W3, 120°F to 220°F
  03110ST, 120°F to 200°F
  03110STW, 120°F to 200°F
  03162, 120°F to 200°F
  03162A1DIX,120°F to 200°F

Milk Frothing Thermometer
  03120DIX, -10°C to 100°C
  03121DIX, -10°C to 100°C

Oven Thermometer
  00288DIX, 65-305°C
  00288E, 150°F to 600°F
  00620, 150°F to 600°F (70°C to 300°C)
  00620A1, 150°F to 600°F
  00620W2, 150°F to 600°F

Product Thermometer
  00640, 0°F to 220°F
  00640A1, 0°F to 220°F
  00640CA1DIX, -10°C to 100°C
  00640CDI, -10°C to 100°C
  00640CDIX, -10°C to 100°C
  00996ST, 0°F to 220°F
  00996STW, 0°F to 220°F
  00996STW1, 0°F to 220°F
  00997STW, 0°F to 220°F
  00997STW1, 0°F to 220°F
  00997STW2, 0°F to 220°F
  00997STW3, 0°F to 220°F
  03161, 0°F to 220°F
  7048CS, -10°C to 100°C

Refrigerator / Freezer Thermometer
  00610, -20°F to 80°F
  00610A1,-20°F to 80°F
  00610CA1DIX,-40°C to 40°C
  00610CDI, -40°C to 40°C
  00696, -40°F to 80°F
  00696W2, -40°F to 80°F
  00696W3, -40°F to 80°F
  01432, -20°F to 80°F



 
Adams-Burch 
1901 Stanford Court
Landover, MD 20785 
United States 
800-347-8093 
301-276-2000

Facility : # 1 China


Digital Product/High Temperature Holding/Low Temperature Holding Thermometer
  03281, -58° to 302°F



 
Adams-Burch 
1901 Stanford Court
Landover, MD 20785 
United States 
301-276-2142

Facility : # 2 Vietnam


Steam Table Pan

Anti-Jam Full Size Steam Table Pan
  CAST-2002
  CAST-2002-PF
  CAST-2004
  CAST-2004-PF
  CAST-2006
  CAST-2006-PF

Anti-Jam Two Thirds Size Steam Table Pan
  CAST-2302
  CAST-2304
  CAST-2306

Anti-Jam Half Size Steam Table Pan
  CAST-1202
  CAST-1202-PF
  CAST-1204
  CAST-1204-PF
  CAST-1206
  CAST-1206-PF

Anti-Jam One Third Size Steam Table Pan
  CAST-1302
  CAST-1304
  CAST-1306

Anti-Jam One Quarter Size Steam Table Pan
  CAST-1402
  CAST-1404
  CAST-1406

Anti-Jam One Sixth Size Steam Table Pan
  CAST-1602
  CAST-1604
  CAST-1606

Anti-Jam One Ninth Size Steam Table Pan
  CAST-1902
  CAST-1904

COMPONENTS:

Full Size Steam Table Pan Cover
  CSTC-2000
  CSTC-2000S

Two Thirds Size Steam Table Pan Cover
  CSTC-2300
  CSTC-2300S

Half Size Steam Table Pan Cover
  CSTC-1200
  CSTC-1200S

One Third Size Steam Table Pan Cover
  CSTC-1300
  CSTC-1300S

One Quarter Size Steam Table Pan Cover
  CSTC-1400
  CSTC-1400S

One Sixth Size Steam Table Pan Cover
  CSTC-1600
  CSTC-1600C

One Ninth Size Steam Table Pan Cover
  CSTC-1900
  CSTC-1900S



 
Adams-Burch 
1901 Stanford Court
Landover, MD 20785 
United States 
800-347-8093 
301-276-2000

Facility : # 1 China


Candy/Deep Fat Fryer Thermometer
  03280: 1 Inch Dial, 50°F to 550°F

Pocket Test Thermometer
  03279: 1 Inch Dial, 0°F to 220°F

Refrigerator/Freezer Thermometer
  03277: 3.46 Inch x 0.79 Inch Dial, -40°F to 60°F/-40°C to 10°C
  03278: 2.27 Inch x 0.67 Inch Dial, -20°F to 100°F/-30°C to 40°C



 
Adapt Technologies LLC 
24 Portland Road
Suite 200 
Conshohocken, PA 19428 
United States 
610-896-7274
Visit this company's website

Facility : Conshohocken, PA


COMPONENTS:

LED Lighting Tubes for Splash Zone and Non Food Zone[1]
  T8-BC-(3)-(4)-(5)-80D-BI-S
 
[1] (3) Lamp length: 24, 36, OR 48 Inches
    (4) Lamp wattage: 8W, 10W, 12W, OR 14W
    (5) Correlated color temperature (CCT): 3K=3000K UP TO 65K = 6500K



 
Admiral Craft Equipment Corp Inc. 
800 Shames Drive
Westbury, NY 11590 
United States 
800-223-7750 
516-433-3535
Visit this company's website

Facility : # 1 China


Aluminum Fry Pan
  BLK-10FP/4
  BLK-12FP/4
  BLK-14FP/4
  BLK-7FP/4
  BLK-8FP/4
  HER-10FP/4
  HER-12FP/4
  HER-14FP/4
  HER-7FP/4
  HER-8FP/4
  XCL-10FP/4
  XCL-12FP/4
  XCL-14FP/4
  XCL-7FP/4
  XCL-8FP/4

Fry Pan[1]
  HER-10FP/3
  HER-12FP/3
  HER-14FP/3
  HER-7FP/3
  HER-8FP/3
  XCL-10FP/3
  XCL-12FP/3
  XCL-14FP/3
  XCL-7FP/3
  XCL-8FP/3
 
[1] NSF Certified production beginning with date code 9/24/01.

Sauce Pot Cover
  ALSP-10C
  ALSP-1C
  ALSP-2C
  ALSP-3C
  ALSP-4C
  ALSP-5C
  ALSP-7C

Sauce Pot and Cover
  ALSP-1
  ALSP-10
  ALSP-2
  ALSP-3
  ALSP-4
  ALSP-5
  ALSP-7

Stock Pot
  H3-SP100
  H3-SP12
  H3-SP16
  H3-SP20
  H3-SP24
  H3-SP32
  H3-SP40
  H3-SP50
  H3-SP60
  H3-SP8
  H3-SP80

Stock Pot Cover
  H3-SP100C
  H3-SP12C
  H3-SP16C
  H3-SP20C
  H3-SP24C
  H3-SP32C
  H3-SP40C
  H3-SP50C
  H3-SP60C
  H3-SP80C
  H3-SP8C


Facility : # 7 China


Stainless Steel Sauce Pan
  SPS-10

Stainless Steel Pot/Cover
  BRSS-25
  BRSS-20

Stainless Steel Non-Stick Fry Pan
  FPSI-10EX
  FPSI-12EX
  FPSI-8EX

Stainless Steel Pot/Cover
  BRSS-30

Stainless Steel Sauce Pan
  SPS-2
  SPS-45
  SPS-75

Stainless Steel Pot/Cover
  BRSS-15

Stainless Steel Fry Pan
  FPSI-8
  FPSI-12
  FPSI-10

Stainless Steel Stock Pot
  SSP-12
  SSP-16
  SSP-20
  SSP-24
  SSP-32
  SSP-40
  SSP-60
  SSP-8
  SSP-80
  SSP-100

COMPONENTS:

Stainless Steel Cover
  CS-20
  CS-28
  CS-24
  CS-40
  CS-45
  CS-50
  CS-30
  CS-36
  CS-34
  CS-16


Facility : Guangdong, China


Component Shelving Acceptable for Dry Storage and Heated Environments Only

Chrome Plated Shelf[1] [2]
  SH(1)(2)C
 
[1] (1) Shelf width in inches
    (2) Shelf length in inches
[2] Company name is represented on product by marking the collar with the letters Ps.

Chrome Plated Post[3]
  P(1)C
 
[3] (1) Post height in inches

Single Wall Bracket Chrome
  WSB14C
  WSB18C
  WSB21C

Shelving Acceptable for Dry Storage and Heated Environments Only

Chrome Plated Shelf and Post Assembly[1] [2]
  SK(1)(2)C
 
[1] (1) Shelf width in inches
    (2) Shelf length in inches
[2] Company name is represented on product by marking the collar with the letters Ps.

Component Shelving Acceptable for All Environments (including Refrigerators, Freezers, and Warewashing Areas)

Green Epoxy Coated Shelf[1] [2]
  SH(1)(2)G
 
[1] (1) Shelf width in inches
    (2) Shelf length in inches
[2] Company name is represented on product by marking the collar with the letters Ps.

Green Epoxy Coated Post[3]
  P(1)G
 
[3] (1) Post height in inches

Single Wall Bracket Green Epoxy
  WSB14G
  WSB18G
  WSB21G


Facility : Hangzhou, China


Product Thermometer
  PT-1 0° F to 220° F
  PT-2 -40° F to 180° F
  PT-3 50° F to 550° F
  FT-1 0° F to 220° F
  IRT-2 0° F to 220° F

Refrigerator/Freezer Thermometer[1]
  FT-2 -20° F to 80° F/ -30° C to 30° C
  FT-3 -20° F to 80° F/ -30° C to 30° C
  FGT-1 -40° F to 80° F/ -40° C to 25° C
 
[1] Accepted for Food Zone Non-contact applications

Oven Thermometer[1]
  OT-2 100° F to 600° F/ 50° C TO 300° C
  OT-3 100° F to 600° F/ 50° C TO 300° C
 
[1] Accepted for Food Zone Non-contact applications

Deep Fryer Thermometer
  DFCT-2 100° F to 400° F/40° C to 200° C

Meat Thermometer
  MT-1 130° F to 190° F/ 54° C to 88° C
  MT-2 130° F to 190° F/ 54° C to 88° C
  MT-3 130° F to 190° F/ 54° C to 88° C


Facility : Xiamen, China


Melamine Dinnerware[1] [2] [3]

Bouillon Cup
  CB74

Fruit Bowl
  FR35
  FR50

Low Shape Cup
  CO75

Mug
  MG91

Nappy Bowl
  BN11
  BN15

Oval Platter
  OP10
  OP12
  OP14
  OP16

Oval Vegetable Dish
  OC55
  OV40

Plate
  PL54
  PL65
  PL72
  PL80
  PL90
  PL99

Rimmed Soup Bowl
  BL10
  BL13

Saucer
  SA56

Serving Dish
  DV10

Six Compartment Trays
  T1410

Tall Stack Cup
  CS76

Three Compartment Plates
  PC91
  PC98

[1] Model numbers may or may not contain prefix MEL.
[2] Acceptable colors include white, tan, yellow and green.
[3] Model number may or may not contain one of the following suffixes:
      G - Green
      T - Tan
      W - White
      Y - Yellow



 
Admiral Craft Equipment Corp Inc. 
800 Shames Drive
Westbury, NY 11590 
United States 
800-223-7750

Facility : # 1 China


Anti-Slide Tray
  NST-1014BK/RECTANGULAR
  NST-1014BR/RECTANGULAR
  NST-11BK/ROUND
  NST-11BR/ROUND
  NST-1206BK/RECTANGULAR
  NST-1216BR/RECTANGULAR
  NST-1418BK/RECTANGULAR
  NST-1418BR/RECTANGULAR
  NST-14BK/ROUND
  NST-14BR/ROUND
  NST-1520BK/RECTANGULAR
  NST-1520BR/RECTANGULAR
  NST-1622BK/RECTANGULAR
  NST-1622BR/RECTANGULAR
  NST-16BK/ROUND
  NST-16BR/ROUND
  NST-1826BK/RECTANGULAR
  NST-1826BR/RECTANGULAR
  NST-18BK/ROUND
  NST-18BR/ROUND
  NST-2025BK/OVAL
  NST-2025BR/OVAL
  NST-2227BK/OVAL
  NST-2227BR/OVAL
  NST-2429BK/OVAL
  NST-2429BR/OVAL
  NST-2530BK/OVAL
  NST-2530BR/OVAL



Admiral Craft Equipment Corp Inc. 
800 Shames Drive
Westbury, NY 11590 
United States 
800-223-7750 

Facility : Zhejiang Province, China


Food Container
  200F2
  200F4
  200F6
  200H2
  200H4
  200H6
  200HL2
  200HL4
  200HL6
  200N2
  200N4
  200Q2
  200Q4
  200Q6
  200S2
  200S4
  200S6
  200T2
  200T4
  200T6
  200TT2
  200TT4
  200TT6
  22F2
  22F4
  22F6
  22H2
  22H4
  22H6
  22N2
  22N4
  22Q2
  22Q4
  22Q6
  22S2
  22S4
  22S6
  22T2
  22T4
  22T6
  PP-200F1
  PP-200F2
  PP-200F4
  PP-200F6
  PP-200H2
  PP-200H4
  PP-200H6

COMPONENTS:

Food Container Lid
  CST-F
  CST-H
  CST-HL
  CST-N
  CST-Q
  CST-S
  CST-T
  CST-TT



 
Admiral Craft Equipment Corp. Inc. 
800 Shames Drive
Westbury, NY 11590 
United States 
516-433-3535

Facility : Taichung Hsien, Taiwan


Kitchen Utensils[1]
  CUT-10ISWH
  CUT-12ISWH
  CUT-14ISWH
  CUT-22/W
  CUT-6WPSWH
  CUT-7ISWH
  CUT-7WPWH
  CUT-8ISOWH
  CUT-HT43
  CUT-PF12
  CUT-PS4
  CUT-PS5
  CUT-S4
  CUT-S43WH
  CUT-SS
  CUT-ST54
  CUT-T2
  CUT-T42REWH
  CUT-T42SEWH
  CUT-T43BWH
  CUT-T63WH
  CUT-T83PWH
  CUT-T83WH
 
[1] NSF Certified production beginning 06/01/02.



 
Admiral Craft Equipment Corp. Inc. 
800 Shames Drive
Westbury, NY 11590 
United States 
516-433-3535

Facility : Jiangmen City, Guangdong Province, China


Thumb Disher
  ICS-24
  ICS-30
  ICS-8
  ICS-6
  ICS-20
  ICS-16
  ICS-12
  ICS-10
  ICS-40



 
Admiral Craft Equipment Corp. Inc. 
800 Shames Drive
Westbury, NY 11590 
United States 
800-223-7750

Facility : Changhua, Taiwan


Cutting Board
  CBW-1218
  CBW-1520
  CBW-1824
  CBW-1830
  CBW-610
  CCB-1218/BR
  CCB-1218/BU
  CCB-1218/GN
  CCB-1218/RD
  CCB-1218/YL
  CCB-1520/BR
  CCB-1520/BU
  CCB-1520/GN
  CCB-1520/RD
  CCB-1520/YL
  CCB-1824/BR
  CCB-1824/BU
  CCB-1824/GN
  CCB-1824/RD
  CCB-1824/YL
  DCB-1218H
  DCB-1520H
  DCB-1824H
  FCB-1218/W
  FCB-1520/W
  FCB-1824/W
  FCCB-1218
  FCCB-1520
  FCCB-1824



 
Advance Tabco 
200 Heartland Boulevard
Edgewood, NY 11717 
United States 
800-645-3166 
631-242-4800

Facility : # 1 USA


Custom Sinks made in compliance with NSF Standard 2

Custom Dishtables

Dishtable with Three Compartment Pot Sink[1]
  DTC-3-1620
  DTC-3-2020
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Prepackaged Dish Kleen Dishtable - Dishlanding[1]
  DTS-D30
  DTS-D60
  DTS-D70
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Prepackaged Dish Kleen Dishtable - Korner[1]
  DTC-G30
  DTC-G60
  DTC-G70
  DTC-K30
  DTC-K60
  DTC-K70
  DTS-G30
  DTS-G60
  DTS-G70
  DTS-K30
  DTS-K60
  DTS-K70
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Prepackaged Dish Kleen Dishtable - Straight[1]
  DTC-S30
  DTC-S60
  DTC-S70
  DTS-S30
  DTS-S60
  DTS-S70
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Prepackaged Dish Kleen Dishtable - U Shaped[1]
  DTS-U30
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Sorting Table[1]
  BSR-(1)
  SR-(1)
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Undercounter Dishtable[1]
  DTU-U60-(1)
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    

Korner Sink[2] [3]
  94-K(4)-(5)D
 
[2] All models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.
[3] (1)  - Bowl size: 301 - 28" x 30", 241 - 20" x 28", 201 - 28" x 20",
           202 - (2) 28" x 20" and (1) 28" x 30"    
    (2)  - Number of compartments (1, 2, or 3); all bowls are 16" x 20"    
    (3)  - Length of drainboard; all drainboards are 18"    
    (4)  - Bowl size
    (5)  - Drainboard size   
    (6)  - Drainboard location: 1 - Right, 2 - Left, 3 - Both    
    (7)  - Number of compartments; all bowls are 24" x 24": 48 - One, 72 - Two, 96 - Three
    (8)  - Number of compartments and bowl size. Single digit indicates the number of
           compartments; bowl size is 16" x 20". If more than one digit, first digit 
           indicates bowl size (2 - 20" x 20", 4 - 24" x 24", 6 - 18" x 24", 8 - 20" x
           28") and second digit indicates number of compartments.
    (9)  - Overall length of sink compartment.
    (10) - Length of drainboard.
    (11) - Number of sink bowls
    (12) - Model number

Regaline Sink with Drainboard[1] [2] [3]
  9(1)(8)(9)(10)
  93(1)(8)(9)(10)
  94(1)(8)(9)(10)
  T9(1)(8)(9)(10)
 
[1] (1) - length in inches
    K   - None
    L   - Left side drainboards
    R   - Right side drainboards
    RL  - Right and left side drainboards
    
[2] All models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.
[3] (1)  - Bowl size: 301 - 28" x 30", 241 - 20" x 28", 201 - 28" x 20",
           202 - (2) 28" x 20" and (1) 28" x 30"    
    (2)  - Number of compartments (1, 2, or 3); all bowls are 16" x 20"    
    (3)  - Length of drainboard; all drainboards are 18"    
    (4)  - Bowl size
    (5)  - Drainboard size   
    (6)  - Drainboard location: 1 - Right, 2 - Left, 3 - Both    
    (7)  - Number of compartments; all bowls are 24" x 24": 48 - One, 72 - Two, 96 - Three
    (8)  - Number of compartments and bowl size. Single digit indicates the number of
           compartments; bowl size is 16" x 20". If more than one digit, first digit 
           indicates bowl size (2 - 20" x 20", 4 - 24" x 24", 6 - 18" x 24", 8 - 20" x
           28") and second digit indicates number of compartments.
    (9)  - Overall length of sink compartment.
    (10) - Length of drainboard.
    (11) - Number of sink bowls
    (12) - Model number

Regaline Sink without Drainboard[2] [3]
  9(8)(9)(10)
  93(8)(9)(10)
  94(8)(9)(10)
  T9(8)(9)(10)
 
[2] All models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.
[3] (1)  - Bowl size: 301 - 28" x 30", 241 - 20" x 28", 201 - 28" x 20",
           202 - (2) 28" x 20" and (1) 28" x 30"    
    (2)  - Number of compartments (1, 2, or 3); all bowls are 16" x 20"    
    (3)  - Length of drainboard; all drainboards are 18"    
    (4)  - Bowl size
    (5)  - Drainboard size   
    (6)  - Drainboard location: 1 - Right, 2 - Left, 3 - Both    
    (7)  - Number of compartments; all bowls are 24" x 24": 48 - One, 72 - Two, 96 - Three
    (8)  - Number of compartments and bowl size. Single digit indicates the number of
           compartments; bowl size is 16" x 20". If more than one digit, first digit 
           indicates bowl size (2 - 20" x 20", 4 - 24" x 24", 6 - 18" x 24", 8 - 20" x
           28") and second digit indicates number of compartments.
    (9)  - Overall length of sink compartment.
    (10) - Length of drainboard.
    (11) - Number of sink bowls
    (12) - Model number

Component Shelving Acceptable for All Environments (including Refrigerators, Freezers and Warewashing)

Undershelf
  DTA-SS-18
  DTA-SS-24
  DTA-SS-30
  DTA-SS-42
  DTA-SS-54
  DTA-SS-66
  DTA-SS-78

COMPONENTS:

Drop-In Handwash Sink[2] [3] [4] [5] [6] [7] [8]
  DI-(1)-(2)
 
[2] All models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.
[3] (1)  - Bowl size: 301 - 28" x 30", 241 - 20" x 28", 201 - 28" x 20",
           202 - (2) 28" x 20" and (1) 28" x 30"    
    (2)  - Number of compartments (1, 2, or 3); all bowls are 16" x 20"    
    (3)  - Length of drainboard; all drainboards are 18"    
    (4)  - Bowl size
    (5)  - Drainboard size   
    (6)  - Drainboard location: 1 - Right, 2 - Left, 3 - Both    
    (7)  - Number of compartments; all bowls are 24" x 24": 48 - One, 72 - Two, 96 - Three
    (8)  - Number of compartments and bowl size. Single digit indicates the number of
           compartments; bowl size is 16" x 20". If more than one digit, first digit 
           indicates bowl size (2 - 20" x 20", 4 - 24" x 24", 6 - 18" x 24", 8 - 20" x
           28") and second digit indicates number of compartments.
    (9)  - Overall length of sink compartment.
    (10) - Length of drainboard.
    (11) - Number of sink bowls
    (12) - Model number
[4] With or without paper towel dispenser.
[5] Drop-in units must be installed in a countertop that has a 6" minimum backsplash.
[6] With or without 6" backsplash
[7] NSF Certified models begin with production date 020110.
[8] This sink with multiple bowls is Certified for use in mobile food carts and kiosks only.

Pot Sink
  DTA-99A
  DTA-99B

Prerinse Basket with Slide Bar
  DTA-62
  DTA-69

Prerinse Sink Assembly
  DTA-61

Slide Bar
  DTA-63


Facility : # 2 USA


Custom Shelving Acceptable for All Environments (including Refrigerators, Freezers and Warewashing Areas)

Custom Worktables

Catalog Items[1]

Aluminum Bun Pan
  18 NF-26

Enclosed Worktable, Stainless Steel Top[2] [3] [4]
  BEV-XX-XXXX[5]
  CB-SS-(1)
  CB-SS-(1)M
  CF-SS-(1)M
  CK-SS-(1)M
  CT-XXXX[3]
  DC-XXXX[5]
  EB-SS-(1)M
  EDC-XXXX[5]
  EF-SS-(1)M
  EK-SS-(1)M
  HB-SS-(1)M
  HDRC-XXXX[5]
  HF-SS-(1)M
  HK-SS-(1)M
  SDRC-XXXX[5]
  SHK-XXXX[5]
  WAT-XX-XXXX[5] [9]
 
[2] (1) Size: Width in inches, length in feet
[3] XXXX - Length and width in inches.
[3] XXXX - Length and width in inches.
[4] X - Number of drawers.
[5] First two X's indicate width in inches.  Last two X's indicate length in feet.  Models
    may have the addition of integrated welded sinks, drawers, table cut-outs, and
    undershelves.
[9] Optional NSF Listed Ice Bin.

Equipment Stand, Stainless Steel Top[2]
  AEG-(1)
  ASG-(1)
  EG-(1)
  EG-LG(1)[10]
  ES-(1)
 
[2] (1) Size: Width in inches, length in feet
[10] NSF Certified production beginning with date code 7-20-05.

Mixer Table and Stand, Stainless Steel Top[2]
  AG-MT-(1)
  MT-GL-(1)
  MT-MG-(1)
  MT-MS-(1)
  MT-SS-(1)
  MX-GL-(1)
  MX-SS-(1)
  SAG-MT-(1)
 
[2] (1) Size: Width in inches, length in feet

Poly Top Worktable[2]
  BONE-(1)
  BONE-SS(1)
  SPB-(1)
  SPC-(1)
  SPS-(1)
  SPT-(1)
  SPW-(1)
  TRIM-1(1)
  TRIM-2(1)
 
[2] (1) Size: Width in inches, length in feet

Prep Table, Stainless Steel Top
  DL-24-72
  DL-24-96
  DL-30-72
  DL-30-96

Stainless Steel Countertop[2]
  VCTC-(1)
  VCTF-(1)
  VKCT-(1)
 
[2] (1) Size: Width in inches, length in feet

Stainless Steel Drawer
  ADT-X-XXXX[3] [4]
  MDC-XXXX
  NS-XXXX[3]
  SHD-XXXX
  STD-X-XXXX[3] [4]
 
[3] XXXX - Length and width in inches.
[4] X - Number of drawers.

Stainless Steel Top Table[2]
  KTMS-(1)
  TSPS-(1)
  TSPT-(1)
  TVKG-(1)
  TVKS-(1)
  TVLG-(1)
  TVSS-(1)
  VKG-(1)
  VKS-(1)
  VLG-(1)
  VSS-(1)
 
[2] (1) Size: Width in inches, length in feet

[1] All model numbers may have alpha-numeric suffixes indicating pricing code.

Catalog Items for Shelving Acceptable for All Environments (including Refrigerators, Freezers, and Warewashing Areas)

Knockdown Shelving[6]
  AWS-KD-XX
  WS-KD-XX
 
[6] Beginning with serial number 462800.

Shelving, Stainless Steel[8]
  AD-(1)-(2)
  CDS-(1)-(2)
  CS-(1)-(2)
  CU-(1)-(2)
  DS-(1)-(2)
  EX-(1)-(2)
  MC-(1)-(2)
  ML-(1)-(2)
  MR-(1)-(2)
  MS-(1)-(2)
  ODS-(1)-(2)
  OTS-(1)-(2)
  PA-(1)-(2)
  PS-(1)-(2)
  PT-(1)-(2)
  TS-(1)-(2)
  UG-(1)-(2)
  US-(1)-(2)
  WCH-(1)-(2)
  WCO-(1)-(2)
  WCS-(1)-(2)
 
[8] (1) Width in inches
    (2) Length in inches

COMPONENTS:

Food Shield for use on Cafeteria Counters[11]
  GSGC-XX-YYY
  NSGC-XX-YYY
  SGC-XX-YYY
 
[11] XX  - Indicates width of shelf
     YYY - Indicates length of shelf

Food Shield for use on Cooking and/or Carving Stations[11]
  SGCC-XX-YYY
 
[11] XX  - Indicates width of shelf
     YYY - Indicates length of shelf

Self Service Food Shield[11]
  DSG-XX-YYY
  GSG-XX-YYY
  GSGD-XX-YYY
  NDSG-XX-YYY
  NSG-XX-YYY
  SG-XX-YYY
 
[11] XX  - Indicates width of shelf
     YYY - Indicates length of shelf

Sink[7]
  TA-11
 
[7] Welded into Listed tables.


Facility : # 4 USA


Bus Box Cart
  BC3

Bus Pan Dolly
  BPD-1

Can Rack[1]
  CR10
  CRPL10
  CRSS10
 
[1] Numeric suffixes indicate number of cans the rack will hold.

Curved Top Oven Rack
  CFL10
  CFL12
  CFL15
  CFL20
  CFL30
  CSL10
  CSL12
  CSL15
  CSL20
  CSL30

Donut Rack
  DR20-3

Dunnage Rack
  DUN-2036
  DUN-2048
  DUN-2060
  DUN-2436
  DUN-2448
  DUN-2460

Enclosed Pan Rack
  EPC-40

Floor Trough
  FDR - (1) - (2)[2]
  FFTG - (1) - (2)[2]
  FRG - (1) - (2)[2]
  FTG - (1) - (2)[2]
  FTG-ADV - (1)-(2)-(3)[4]
 
[2] (1) Width in inches
    (2) Length in inches
[4] (1) Indicates length in inches.

Glass Rack Dolly
  GRD-1

Keg Rack[4]
  KR-(1)
 
[4] (1) Indicates length in inches.

Lug Cart
  LR1
  LR2
  LR4
  LR6

Oval Tray Rack
  OT10-6
  OT20-3

Pan Rack
  IR16-36K
  IR16-3W
  PR10-3W
  PR10-3WA
  PR10-6WS
  PR10-6WT
  PR12-5W
  PR12-5WS
  PR15-4W
  PR15-4WS
  PR16-3.5K
  PR18-3K
  PR18-3W
  PR20-3K
  PR20-3KS
  PR20-3W
  PR20-3WS
  PR25-2W
  PR25-3K
  PR25-3W
  PR30-2K
  PR30-2KS
  PR30-2W
  PR30-2WS

Pan Truck
  PD-1

Pizza Pan Rack
  PDB7
  PR10-3WT
  PZ12

Platter Rack
  PL10-10
  PL10-12
  PL12-10
  PL12-12
  PL5-10
  PL5-12
  PL6-10
  PL6-12

Steam Table Pan Rack
  STR20-3W

Universal Rack
  UR10
  UR12

Wire Rack
  WR36
  WR36S

Catalog Items for Shelving Acceptable for All Environments (including Refrigerators, Freezers, and Warewashing Areas)

Sorting Shelf
  DT-6R-11
  DT-6R-12
  DT-6R-13
  DT-6R-14
  DTA-79

[3] (1) Length in inches	
    (2) Width in inches
    (3) Depth in inches

Facility : # 7 USA


Custom Sinks made in compliance with NSF Standard 2

Hand Washing Sink[1] [2]
  7-(1)-(2)
 
[1] Only sink component is evaluated against NSF Standards.
[2] (1) Two letters indicating customer designations.
    (2) Indicates faucets and accessories.

Lavatory Sink[1] [2]
  7-(1)-(2)
 
[1] Only sink component is evaluated against NSF Standards.
[2] (1) Two letters indicating customer designations.
    (2) Indicates faucets and accessories.

Service Sink
  8-OP-16


Facility : # 8 USA


Bakery Sink[1] [2] [3]
  K7-B(1)-(1)
 
[1] Models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.
[2] Additional suffixes indicate: 
    (1) Length in inches. 
        R  – Right side drainboard
        L  – Left side drainboard
        RL - Right and Left side drainboard
        K  - None
[3] (1)  Bowl size: 
         201 - 28" x 20"
         202 - (2) 28" x 20" and (1) 28" x 30"
         301 - 28" x 30", 241 - 20" x 28" 
    (2)  Number of compartments (1, 2, or 3); all bowls are 16" x 20"    
    (3)  Length of drainboard; all drainboards are 18"    
    (4)  Bowl size
    (5)  Drainboard size   
    (6)  Drainboard location: 
         1 - Right
         2 - Left
         3 - Both    
    (7)  Number of compartments; all bowls are 24" x 24": 
         48 - One
         72 - Two
         96 - Three   
    (8)  Number of compartments and bowl size. Single digit indicates the number of 
         compartments; bowl size is 16" x 20". If more than one digit, first digit 
         indicates bowl size (2 - 20" x 20", 4 - 24" x 24", 6 - 18" x 24", 8 - 20" x 28") 
         and second digit indicates number of compartments.
    (9)  Overall length of sink compartment.
    (10) Length of drainboard.
    (11) Number of sink bowls
    (12) Model number

Convenience Store Sink
  K7-CS-(1)[1] [4]
 
[1] Models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.
[4] (1) Indicates Bowl size and number of bowls.    
    (2)  Number of sink compartments    
    (3) 4 digit number indicates bowl size in inches    
    (4) 2 digit number indicates drain board length in inches    
    (5) Drainboard location: R - Right, L - Left, RL - Right and Left   
    (6) Length in inches

Meat Platter Sink[1]
  18-K5-34
  18-K5-44
  18-K5-56
  K5-93-54
  K7-MP-36
  K71-MP-36
  K72-MP-36
  K73-MP-36
  K74-P-28
  K74-P-42
  K75-P-28
  K75-P-42
  K76-P-28
  K76-P-42
 
[1] Models may have alpha numeric suffixes (X, and 1X-7X) included in product literature
    which indicates pricing code.  These suffixes will not appear on the product data plate.

Mobile Sink
  9-FMS-12
  9-FMS-20
  9-FSS-20

Stainless Steel Sink[4]
  FA-(2)(3)-(4)(5)
  FC MOD
  FC-(2)(3)-(4)(5)
  FE-(2)(3)-(4)(5)
  FS MOD
  FS-(2)(3)-(4)(5)
  FS-WM-(2)(3)(6)
 
[4] (1) Indicates Bowl size and number of bowls.    
    (2)  Number of sink compartments    
    (3) 4 digit number indicates bowl size in inches    
    (4) 2 digit number indicates drain board length in inches    
    (5) Drainboard location: R - Right, L - Left, RL - Right and Left   
    (6) Length in inches


Facility : # 10 USA


Solid Top Units[1]
  STU-2
  STU-3
  STU-4
  STU-5
 
[1] The prefix P denotes that the unit is portable.

Cold Pan Units[1]
  CPU-2
  CPU-3
  CPU-4
  CPU-5
 
[1] The prefix P denotes that the unit is portable.

Mop Cabinet
  9-OPC-84 (1)(2)-(3)[2]
  CAB-(1)-(2)[3]
 
[2] (1) May be followed by a D indicating Double Door Model				
    (2) May be followed by L or R indicating location of Mop Sink				
    (3) May be followed by 300 indicating material upgrade
[3] (1) Numeric value between 1 and 4 indicating number of shelves				
    (2) May be followed by 300 indicating material upgrade

"Bar Sink Catalog Units"

Challenger
  CRB-22C
  CRB-31C
  CRB-32L
  CRB-32R
  CRB-33C
  CRB-42C
  CRB-42L
  CRB-42R
  CRB-43L
  CRB-43R
  CRB-44C
  CRB-53C
  CRB-53L
  CRB-53R
  CRB-63C
  CRB-64C
  CRB-73C
  CRB-74C
  CRB-83C
  CRB-84C

Slimline
  SLB-22C
  SLB-31C
  SLB-32L
  SLB-32R
  SLB-33C
  SLB-42C
  SLB-42L
  SLB-42R
  SLB-43L
  SLB-43R
  SLB-44C
  SLB-53C
  SLB-53L
  SLB-53R
  SLB-63C
  SLB-64C
  SLB-73C
  SLB-74C
  SLB-83C
  SLB-84C

Prestige 19"
  PRB-19-22C
  PRB-19-31C
  PRB-19-32L
  PRB-19-32R
  PRB-19-33C
  PRB-19-42C
  PRB-19-42L
  PRB-19-42R
  PRB-19-43L
  PRB-19-43R
  PRB-19-44C
  PRB-19-53C
  PRB-19-53L
  PRB-19-53R
  PRB-19-63C
  PRB-19-64C
  PRB-19-73C
  PRB-19-74C
  PRB-19-83C
  PRB-19-84C

Prestige 24"
  PRB-24-22C
  PRB-24-31C
  PRB-24-32L
  PRB-24-32R
  PRB-24-33C
  PRB-24-42C
  PRB-24-42L
  PRB-24-42R
  PRB-24-43L
  PRB-24-43R
  PRB-24-44C
  PRB-24-53C
  PRB-24-53L
  PRB-24-53R
  PRB-24-63C
  PRB-24-64C
  PRB-24-73C
  PRB-24-74C
  PRB-24-83C
  PRB-24-84C

"Combination (Cocktail Combo) Catalog Units"

Challenger
  CRC-73C-L
  CRC-73C-R
  CRC-83C-L
  CRC-83C-R
  CRC-84C-L
  CRC-84C-R

Slimline
  SLC-73C-L
  SLC-73C-R
  SLC-83C-L
  SLC-83C-R
  SLC-84C-L
  SLC-84C-R

"Service (Cocktail Jockey & Ice Chests) Catalog Units"

Challenger
  CRI-12-24
  CRI-12-30
  CRI-12-36
  CRI-12-48
  CRI-16-24
  CRI-16-30
  CRI-16-36
  CRJ-15
  CRJ-24
  CRJ-36
  CRJ-6-36

Slimline
  SLI-12-24
  SLI-12-30
  SLI-12-36
  SLI-12-48
  SLI-16-24
  SLI-16-30
  SLI-16-36
  SLJ-15
  SLJ-24
  SLJ-36
  SLJ-6-36

Prestige 19"
  PRI-19-12
  PRI-19-24
  PRI-19-24-XD
  PRI-19-30
  PRI-19-30-XD
  PRI-19-36
  PRI-19-36-XD
  PRI-19-42
  PRI-19-48
  PRI-19-6
  PRC-19-36L
  PRC-19-36R
  PRC-19-42L
  PRC-19-42R
  PRC-19-48L
  PRC-19-48R

Prestige 24"
  PRI-24-12
  PRI-24-24
  PRI-24-24-XD
  PRI-24-30
  PRI-24-30-XD
  PRI-24-36
  PRI-24-36-XD
  PRI-24-42
  PRI-24-48
  PRI-24-6
  PRC-24-36L
  PRC-24-36R
  PRC-24-42L
  PRC-24-42R
  PRC-24-48L
  PRC-24-48R
  PRPT-2442

"Service Catalog Units"

Challenger
  CRD-12
  CRD-18
  CRD-2
  CRD-3
  CRD-30
  CRD-4
  CRD-42
  CRPT-2436
  CRU-60L
  CRU-60R
  CRW-4L
  CRW-4R

Slimline
  SLD-12
  SLD-18
  SLD-2
  SLD-3
  SLD-30
  SLD-4
  SLD-42
  SLU-60L
  SLU-60R
  SLW-4L
  SLW-4R

Prestige 19"
  PRD-19-12
  PRD-19-18
  PRD-19-24
  PRD-19-30
  PRD-19-36
  PRD-19-42
  PRD-19-48

Prestige 24"
  PRD-24-12
  PRD-24-18
  PRD-24-24
  PRD-24-30
  PRD-24-36
  PRD-24-42
  PRD-24-48

"Utility Stand Catalog Units"

Challenger
  CRCR-24
  CRCR-24-CT
  CRLR-24
  CRLR-36
  CROR-24
  CRSR-24

Prestige 19"
  PRCR-19-24
  PRLR-19-12
  PRLR-19-18
  PRLR-19-24
  PRLR-19-30
  PRLR-19-36
  PROR-19-24
  PRSCD-19-18
  PRSCD-19-24
  PRSCD-19-30
  PRSCD-19-36
  PRSCD-19-48
  PRSCO-19-18
  PRSCO-19-24
  PRSCO-19-30
  PRSCO-19-36
  PRSCO-19-48
  PRSR-19-24

Prestige 24"
  PRCR-24-24
  PRLR-24-12
  PRLR-24-18
  PRLR-24-24
  PRLR-24-30
  PRLR-24-36
  PROR-24-24
  PRSCD-24-18
  PRSCD-24-24
  PRSCD-24-30
  PRSCD-24-36
  PRSCD-24-48
  PRSCO-24-18
  PRSCO-24-24
  PRSCO-24-30
  PRSCO-24-36
  PRSCO-24-48
  PRSR-24-24

"Super-Serve Catalog Units"

Challenger
  CR-DB-15
  CR-GS-15
  CR-HS-15
  CR-RC-15
  CR-RS-15
  CR-RW-15
  CR-WB-15
  SC-15-TS-L[4]
  SC-15-TS-S[4]
 
[4] SC versions are 21" front to back

Slimline
  SL-DB-15
  SL-GS-15
  SL-HS-15
  SL-RC-15
  SL-RS-15
  SL-RW-15
  SL-WB-15

Prestige 19"
  PRDB-19-16
  PRGS-19-12
  PRGS-19-18
  PRGS-19-24
  PRGS-19-30
  PRHS-19-16
  PRHSC-19-16
  PRHSST-19-16
  PRRS-19-16
  PRWW-19-16

Prestige 24"
  PRDB-24-16
  PRGS-24-12
  PRGS-24-18
  PRGS-24-24
  PRGS-24-30
  PRHS-24-16
  PRHSC-24-16
  PRHSST-24-16
  PRRS-24-16
  PRWW-24-16

Uni-Serv Units
  PRU-19-60L
  PRU-19-60R
  PRU-24-60L
  PRU-24-60R

Prestige 19" series[5] [6]
  PRWC-19-18
  PRWC-19-24
  PRWC-19-30
  PRWC-19-36
  PRWC-19-48
 
[5] Suffix -DR may be added to indicate units made with doors
[6] NSF Certified Units have a starting date code of 3/6/02

Prestige 24" series[5] [6]
  PRWC-24-18
  PRWC-24-24
  PRWC-24-30
  PRWC-24-36
  PRWC-24-48
 
[5] Suffix -DR may be added to indicate units made with doors
[6] NSF Certified Units have a starting date code of 3/6/02

COMPONENTS:

Drop-In Ice Bins
  D-12-HSL
  D-12-IB-L
  D-12-WSL
  D-24-IB-L
  D-24-SIBL
  D-24-WSIBL


Facility : Kaufman, TX


Equipment Stand, Stainless Steel Top[1]
  AEG-(1)
  ASG-(1)
  EG-(1)
  EG-LG(1)[2]
  ES-(1)
 
[1] (1) Size: Width in inches, length in feet.
[2] NSF Certified production beginning with date code 7-20-05.

Shelving, Stainless Steel[3]
  WS-(1)-(2)
 
[3] (1) Width in inches
    (2) Length in inches	
    

Stainless Steel Top Table[1]
  AG-(1)
  ELAG-(1)
  FAG-(1)
  FLAG-(1)
  FLG-(1)
  FMG-(1)
  FMS-(1)
  FMSLAG(1)
  FSS-(1)
  GLG-(1)
  KAG-(1)
  KLAG-(1)
  KLG-(1)
  KMG-(1)
  KMS-(1)
  KMSLAG(1)
  KSLAG(1)
  KSS-(1)
  MG-(1)
  MS-(1)
  MSLAG(1)
  SAG-(1)
  SFG-(1)
  SFLAG(1)
  SKG-(1)
  SLAG-(1)
  SS-(1)
  TAG-(1)
  TELAG(1)
  TFAG-(1)
  TFLAG(1)
  TFLG-(1)
  TFMG-(1)
  TFMS-(1)
  TFMSLAG(1)
  TFMSU-(1)
  TFSS-(1)
  TGLG-(1)
  TKAG-(1)
  TKLAG(1)
  TKLG-(1)
  TKMG-(1)
  TKMS-(1)
  TKMSLAG(1)
  TKSLAG(1)
  TKSS-(1)
  TMG-(1)
  TMS-(1)
  TMSLAG(1)
  TSAG-(1)
  TSFG-(1)
  TSFLAG(1)
  TSKG-(1)
  TSLAG(1)
  TSS-(1)
  TT-(1)
  TTFS(1)
  TTS(1)
 
[1] (1) Size: Width in inches, length in feet.

Wood Top Table[1]
  BG-(1)
  BGT-(1)
  BS-(1)
  BST-(1)
  H2G-(1)
  H2S-(1)
  TBG-(1)
  TBS-(1)
  TH2G-(1)
  TH2S-(1)
 
[1] (1) Size: Width in inches, length in feet.



 
Advance Tabco 
200 Heartland Boulevard
Edgewood, NY 11717 
United States 
631-242-4800

Facility : # 1 China


Dish Table[1]
  DT(1)- U60-(4)(5)-X
  DT(1)-(2)(3)-(4)(5)-X
 
[1] (1) Table top type: 
        C - Clean dish table without bowl
        S - Soiled dish table with bowl
        U - Undercounter dish table with bowl
    (2) Shape:
        S - Straight
    (3) Leg material and configuration:
        60 - Galv. leg without crossbracing, with plastic bullet feet.  
        70 - S/S leg with cross bracing and S/S bullet feet
        For undercounter dish table:
        60 - S/S leg with crossbracing and S/S bullet feet
    (4) Top shelf length in inches from left to right
    (5) Drain board configuration:
        L - Left
        R - Right

Drop in Sink[2]
  DI-(1)-(4)
  DI-(1)-(4)SP
 
[2] (1) Number of sink bowls
    (2) Interior dimension of sink bowl in inches from left to right
    (3) Interior dimension of sink bowl in inches from front to back
    (4) Depth of bowl

Floor Mop Sink
  9-OP-20
  9-OP-28
  9-OP-40
  9-OP-48

Hand Sink[3]
  7-PS-(1)
  7-PS-(1)-(2)
 
[3] (1) Handsink dimension from left to right:
        23 - 12" Handsink
        60 - 17" Handsink
        EC - 17" Handsink
        CP - 15" Handsink
    (2) SP - Side splashes

Hand Washing Sink[4]
  7-PS-(1)-(2)
  7-PS-(1)-EC-(2)
 
[4] (1) Handsink dimension from left to right:
        23 - 12" Handsink
        60 - 17" Handsink
        EC - 17" Handsink
    (2) SP - Side splashes

Ice Bin[5]
  CRI-(3)(1)
  SLI-(3)(1)
 
[5] (1) Interior dimension of sink bowl in inches from left to right
    (2) Interior dimension of sink bowl in inches from front to back
    (3) Depth of bowl

Over Shelf[6]
  EDS-(2)-(3)
  ETS-(2)-(3)
 
[6] (2) Shelf width in inches from front to back
    (3) Shelf length in inches from left to right

Shelf[7]
  MS-(1)-(2)
  PS-(1)-(2)
  SW-(2)
  WS-(1)-(2)
  WS-KD-(2)
 
[7] (1) Width in inches
    (2) Length in inches

Sink[8]
  CRB-(2)(1)(6)
  SLB-(2)(1)(6)
 
[8] (1) Number of sink compartments
    (2) Interior dimension of sink bowl in inches from left to right
    (3) Interior dimension of sink bowl in inches from front to back
    (4) Depth of bowl
    (5) Dimension of drainboard
    (6) Drainboard configuration: 
        L  - Left 
        R  - Right
        LR - Left and right
    Product may be sold with or without the drainboard

Stainless Steel Sink[9] [10]
  9-FSC-20
  9-FSS-20
  FA-(1)-(2)(3)-(4)(5)
  FE-(1)-(2)(3)-(4)(5)
 
[9] (1) Number of sink compartments
    (2) Interior dimension of sink bowl in inches from left to right or interior length and 
        width of bowl.
    (3) Interior dimension of sink bowl in inches from front to back or depth of bowl.
    (4) Dimension of drainboard
    (5) Drainboard configuration:
        L - Left
        R - Right
        LR - Left and right
[10] Product may be sold with or without the drainboard.

Work Table[11]
  EG-LG-(1)(2)
  FT-(1)(2)
  TT-(1)(2)
  TT-(1)(2)-(3)
  TTF-(1)(2)
  TTFS-(1)(2)
  TTS-(1)(2)
  TTS-(1)(2)-(3)
 
[11] (1) Width in inches
     (2) Length in inches
     (3) Top shelf type:
         1 1/2" - 1 1/2" Back edge riser
         5BS    - 5" Backsplash



 
Advance Tabco 
200 Heartland Boulevard
Edgewood, NY 11717 
United States 
631-242-4800

Facility : # 1 China


Dish Table[1]
  DT(1)-(2)(3)-(4)(5)-X
  DT(1)-U60-(4)(5)-X
 
[1] (1) Table top type:
        C - Clean dish table without bowl
        S - Soiled dish table with bowl
        U – Under-counter dish table with  bowl
    (2) Shape:
        S - Straight
    (3) Leg material and configuration:
        60 – Galv. Leg without cross bracing, with plastic bullet feet.
        70 – S/S leg with cross bracing and S/S bullet feet
        For Under-counter dish table:
        60 - S/S leg with cross bracing and S/S bullet feet
    (4) Top shelf length in inches from left to right
    (5) Drain board configuration:
            L - Left
            R - Right

Hand Sink[2]
  7-PS-(1)-(2)
  7-PS-(1)-EC-(2)
 
[2] (1) Hand sink dimension in inches from left to right.
        23 – 12" Handsink
        60 – 17" Handsink
        EC – 17" Handsink
    (2) SP – Side splashes

Stainless Steel Sink[3] [4]
  9-FSC-20
  9-FSS-20
  FC-(1)-(2)(3)-(4)(5)
  FE-(1)-(2)(3)-(4)(5)
 
[3] (1) Number of sink compartments
    (2) Interior dimension of sink bowl in inches left to right or interior length and width
    of bowl.
    (3) Interior dimension of sink bowl in inches front  to back or depth of bowl
    (4) Dimension of drainboard
    (5) Drainboard configuration:
        L  – Left
        R  – Right
        LR – Left and Right
[4] Product may be sold with or without drainboard.

Stainless Steel Worktable[5]
  EG-LG-(1)(2)
  FT-(1)(2)
  TT-(1)(2)
  TT-(1)(2)-(3)
  TTF-(1)(2
  TTFS-(1)(2)
  TTS-(1)(2)
  TTS-(1)(2)-(3)
 
[5] (1) Width of work surface in inches.
    (2) Length in inches
    (3) Top shelf type:
        1 1/2" – 1-1/2" Back edge riser
        5BS    – 5" Backsplash

Wall Shelf[6]
  MS-(1)-(2)
  WS-(1)-(2)
  WS-KD-(2)
 
[6] (1) Width in inches
    (2) Length in inches



 
Advance Wire Products Ltd. 
19095 24th Avenue
Surrey, BC V3Z 3S9 
Canada 
888-421-4666 
604-541-4666

Facility : Surrey, British Columbia, Canada


Kabob Prep Station
  TRA-0705

Burger Maker Board
  HLD-7921

Portable 7 Slot Knife Block
  HLD-0252



 
Advanced Design Mfg. DBA ADM Sneezeguards 
1281-A Franquette Avenue
Concord, CA 94520 
United States 
800-690-0002 
925-680-8764
Visit this company's website

Facility : Antioch, CA


COMPONENTS:

Adjustable Series Food Shields[1]
  A-452[2] [3] [4]
  A-475[2] [3] [4]
  B-950[2]
  I-750[2]
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.
[2] Evaluated as self-service food shield.
[3] Evaluated as food shield for use on cafeteria counter.
[4] Certified with or without heat lighting option or heat lamp option.

Custom Food Shield[1]
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.

Custom Series Food Shields[1]
  P-100[3] [5]
  P-150[3] [5]
  P-263[3] [4]
  P-400[3] [4] [5]
  P-445[3] [5]
  S-280[2] [4]
  S-280IS[2] [4]
  S-295[2] [4]
  S-445[2] [4]
  S-828[2] [4]
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.
[2] Evaluated as self-service food shield.
[3] Evaluated as food shield for use on cafeteria counter.
[4] Certified with or without heat lighting option or heat lamp option.
[5] Evaluated as food shield for use in elementary schools.

In-Stock EP Series Food Shields[1] [3] [5]
  EP-11
  EP-12
  EP-15
  EP-21
  EP-22
  EP-36
  EP-5
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.
[3] Evaluated as food shield for use on cafeteria counter.
[5] Evaluated as food shield for use in elementary schools.

In-Stock ES Series Food Shields[1] [2]
  ES-31
  ES-40
  ES-67
  ES-73
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.
[2] Evaluated as self-service food shield.

Orbit Series Food Shields[1]
  ORBIT-100[3] [5]
  ORBIT-360[2]
  ORBIT-500[2] [6]
  ORBIT-720[2] [7]
  ORBIT-900[3] [5]
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.
[2] Evaluated as self-service food shield.
[3] Evaluated as food shield for use on cafeteria counter.
[5] Evaluated as food shield for use in elementary schools.
[6] Evaluated as multiple-tier food shield.
[7] Evaluated as food shield for use on mobile buffet counters.

Portable Series Food Shields[1]
  B-950P GLASS[2] [7]
  EP-950 ACRYLIC[2] [7]
 
[1] Certified in Stainless Steel or Aluminum finish, or with Tiger Drylac Series 49 powder
    coating in any color.
[2] Evaluated as self-service food shield.
[7] Evaluated as food shield for use on mobile buffet counters.



 
Aero Manufacturing Company 
310 Allwood Road
P.O. Box 1250 
Clifton, NJ 07012 
United States 
973-473-5300
Visit this company's website

Facility : Clifton, NJ


Custom Dish Table

Custom Hydraulic Table

Custom Mixer Stand

Custom Shelving Acceptable for All Environments[11]
 
[11] Including Refrigerators, Freezers, and Warewashing Areas

Custom Sink

Custom Thermoplastic Top Table

Custom Worktable

Catalog Items:

Bakery Sink[1] [8]
  3FS
  4FS
  PFS
  XFS
 
[1] Number of compartments
[8] Size of compartments or table or shelf

Demo Series Worktable[13]
  DEMO-(1)
 
[13] Numerical suffix indicates width and length of unit.

Maple Top Bakers Table[8]
  MTG
  MTGB
  MTGBX
  MTGBXT
  MTGX
  MTS
  MTSBX
 
[8] Size of compartments or table or shelf

Meat Platter Sink
  3PS
  3PS[7]
  4PS[7]
  4PS
  PPS
  PPS[7]
  XPS[7]
  XPS
 
[7] Length of drainboard with suffix L or R and L and R

Mixer Stand[4] [8]
  (1)MGU
  (1)MLSU
  (1)MSRU
 
[4] (1) Gauge and type of stainless steel
[8] Size of compartments or table or shelf

Process and Handwash Sink
  DIHS-10
  DIHS-5
  HS
  HSB
  HSBE
  HSD
  HSDE
  HSDT
  HSDTA
  HSDTE
  HSE
  HSEE
  HSF
  HSFE
  HSK
  HSKT
  HSTAE
  L
  LB
  LBE
  LE
  LK

Stainless Steel Sink with Integral Drainboards [9]
  (1)BT[2] [6]
  (1)C[1] [2] [6] [7]
  (1)CS[1] [6] [7]
  (1)CSU[1] [2] [6] [7]
  (1)F[1] [2] [6] [7]
  (1)MF[1] [2] [6] [7]
  (1)MP[2] [6]
  (1)MS[2] [6]
 
[1] Number of compartments
[2] Size of compartments
[6] Drainboard length
[7] Length of drainboard with suffix L or R and L and R
[9] (1) With one of the following types of material: 
        3 - 304 stainless steel
        4 - 430 stainless steel
        P - 430 stainless steel
        X - 304 stainless steel

Stainless Steel Sink without Drainboards[1] [2]
  3F
  3MF
  4F
  4MF
  PF
  PMF
  XF
  XMF
 
[1] Number of compartments
[2] Size of compartments

Stainless Steel Top Worktable
  (1)EG[8] [9]
  (1)ES[9]
  (1)TG[8] [9]
  (1)TGB[8] [9]
  (1)TGBO[8] [9]
  (1)TGBOD[8] [9]
  (1)TGBX[8] [9]
  (1)TGO[8] [9]
  (1)TGOD[8] [9]
  (1)TGS[8] [9]
  (1)TGSO[8] [9]
  (1)TGSOD[8] [9]
  (1)TGX[8] [9]
  (1)TS[8] [9]
  (1)TSB[8] [9]
  (1)TSBO[8] [9]
  (1)TSBOD[9]
  (1)TSBX[8] [9]
  (1)TSO[8] [9]
  (1)TSOD[8] [9]
  (1)TSS[8] [9]
  (1)TSSO[8] [9]
  (1)TSSOD[8] [9]
  (1)TSX[8] [9]
  ACB[8]
  APS[8]
  BVT[8]
  EES[8]
  EFT[8]
  GU[8]
  MET[8]
  MMT[8]
  MPR[8]
  PT[8]
  SU[8]
 
[8] Size of compartments or table or shelf
[9] (1) With one of the following types of material: 
        3 - 304 stainless steel
        4 - 430 stainless steel
        P - 430 stainless steel
        X - 304 stainless steel

Stock and Special Purpose Dish Table[4] [8]
  (1)CD
  (1)CDC
  (1)CDCI
  (1)SD
  (1)SDC
  (1)SDCI
  (1)SDCL
  (1)USD
  SDT
 
[4] (1) Gauge and type of stainless steel
[8] Size of compartments or table or shelf

Thermoplastic Top Table[8]
  PS
  PSB
  PSBX
  PSX
 
[8] Size of compartments or table or shelf

Catalog Items for Shelving Acceptable for all Environments (including Refrigerators, Freezer, and Warewasing Areas)

Shelving [8]
  (1)DO[4]
  (1)FAO[4]
  (1)FPC[4]
  (1)FPS[4]
  (1)FSC[4]
  (1)FSS[4]
  (1)FUC[4]
  (1)FUS[4]
  (1)MWS[4]
  (1)MWSC[4]
  (1)MWSL[4]
  (1)MWSR[4]
  (1)O[4]
  (1)W[4]
  (1)WHC[4]
  (1)WOC[4]
  (1)WP[4]
  (1)WSC[4]
  1STW
  3SKTW
  3SW
  CPC
  CPS
  DSU
  SWS[4]
  WPC
  WPS
 
[4] (1) Gauge and type of stainless steel
[8] Size of compartments or table or shelf

[3] Length of sink


 
Aero Manufacturing Company 
310 Allwood Road
P.O. Box 1250 
Clifton, NJ 07012 
United States 
973-473-5300

Facility : # 1 China


Meat Platter Sink
  3PS
  3PS(4)[2]
  4PS
  4PS(4)[2]
  PPS
  PPS(4)[2]
  XPS
  XPS(4)[2]
 
[2] (1) Number of compartments
    (2) Size of compartments
    (3) Drainboard length
    (4) Length of drainboard with suffix L,  R, or LR

Process and Handwash Sink
  DIHS-10
  DIHS-5
  HS
  HSB
  HSBE
  HSD
  HSDE
  HSDT
  HSDTA
  HSDTE
  HSE
  HSEE
  HSF
  HSFE
  HSK
  HSK-1
  HSKT
  HSTAE
  L
  LB
  LBE
  LE
  LK
  XHEF
  XHS
  XHSF

Shelving
  1STW
  3SKTW
  3SW
  CPC
  CPS
  DO(1)[1]
  DSU
  FAO(1)[1]
  FPC(1)[1]
  FPS(1)[1]
  FSC(1)[1]
  FSS(1)[1]
  FUC(1)[1]
  FUS(1)[1]
  GW-(1)[1]
  MWS(1)[1]
  MWSC(1)[1]
  MWSL(1)[1]
  MWSR(1)[1]
  O(1)[1]
  PMW-(1)[1]
  PW-(1)[1]
  SWS(1)[1]
  W(1)[1]
  WHC(1)[1]
  WOC(1)[1]
  WP(1)[1]
  WPC
  WPS
  WSC(1)[1]
  XW-(1)[1]
 
[1] (1) Size of shelf

Stainless Steel Sink
  3F
  3MF
  4F
  4MF
  AF(1)-(2)[2]
  AF(1)-(2)-(3)(4)[2]
  BT(2)(3)[2]
  C(1)(2)(3)(4)[2]
  CS(1)(3)(4)[2]
  CSU(1)(2)(3)(4)[2]
  F(1)(2)(3)(4)[2]
  MF(1)(2)(3)(4)[2]
  MP(2)(3)[2]
  MS(2)(3)[2]
  PF
  PMF
  XF
  XMF
 
[2] (1) Number of compartments
    (2) Size of compartments
    (3) Drainboard length
    (4) Length of drainboard with suffix L,  R, or LR

Stainless Steel Top Worktable[3]
  3TG-(1)-MCM
  3TGS-(1)-MCM
  ACB(1)
  AI-(1)
  AIG-(1)
  AIS-(1)
  APS(1)
  BVT(1)
  EES(1)
  EFT(1)
  EG(1)(2)
  ES(2)
  GU(1)
  MET(1)
  MMT(1)
  MPR(1)
  PT(1)
  SU(1)
  TG(1)(2)
  TGB(1)(2)
  TGBO(1)(2)
  TGBOD(1)(2)
  TGBX(1)(2)
  TGO(1)(2)
  TGOD(1)(2)
  TGS(1)(2)
  TGSO(1)(2)
  TGSOD(1)(2)
  TGX(1)(2)
  TS(1)(2)
  TSB(1)(2)
  TSBO(1)(2)
  TSBOD(2)
  TSBX(1)(2)
  TSO(1)(2)
  TSOD(1)(2)
  TSS(1)(2)
  TSSO(1)(2)
  TSSOD(1)(2)
  TSX(1)(2)
 
[3] (1) Size of table
    (2) With one of the following types of material:
        3 - 304 Stainless steel
        4 - 430 Stainless steel
        P - 430 Stainless steel
        X - 304 Stainless steel

Stock and Special Purpose Dish Table
  (1)CD[4]
  (1)CDC[4]
  (1)CDCI[4]
  (1)SD[4]
  (1)SDC[4]
  (1)SDCI[4]
  (1)SDCL[4]
  (1)USD[4]
  SDT
 
[4] (1) Gauge and type of stainless steel

Underbar Sink[5]
  UB-(1)(2)
 
[5] (1) Length of unit, front to back
    (2) Length of sink



 
Aerowerks Inc. 
6625 Millcreek Drive
Mississauga, ON L5N 5M4 
Canada 
800-774-1616 
905-363-6999
Visit this company's website

Facility : Mississauga, Ontario, Canada


Custom Conveyor

Custom Dishtable

Gravity Roller Conveyor[1]
  GRC-N
 
[1] For splash zone/soiled dishware applications only

Polycord Conveyor[1]
  PC-N
 
[1] For splash zone/soiled dishware applications only

Power Roller Conveyor[1]
  PRC-N
 
[1] For splash zone/soiled dishware applications only

Slat Belt Conveyor[1]
  SBC-N
 
[1] For splash zone/soiled dishware applications only

Tray Accumulator Conveyor[1]
  TAC-N
 
[1] For splash zone/soiled dishware applications only



 
AES Clean Technology, Inc. 
422 Stump Road
Montgomeryville, PA 18936 
United States 
888-237-2532 
215-393-6810

Facility : Kenosha, WI


COMPONENTS:

Lighting Fixture w/ Overlapping Doors for Food Zone/Non-Contact and Splash Zones[1] [2]
  AES2ROL-(1)-(2)-DCC-DV-(3)-(4)-SYM-(5)
  AES3ROL-(1)-(2)-DCC-DV-(3)-(4)-SYM-(5)
 
[1] (1) Size - 14 1'×4', 22 2'×2' , 24 2'×4'
    (2) Lamp Type - 45L35K 45 Watt 3500K LED (82 CRI), 45L40K 45 Watt 4000K LED (82 CRI),
        45L50K 45 Watt 5000K LED (82 CRI), 67L35K 67 Watt 3500K LED (82 CRI), 67L40K 67 
        Watt 4000K LED (82 CRI), 67L50K 67 Watt 5000K LED (82 CRI), 90L35K 90 Watt 3500K 
        LED (82 CRI), 90L40K 90 Watt 4000K LED (82 CRI), 90L50K 90 Watt 5000K LED (82 
        CRI), 135L35K 135 Watt 3500K LED (82 CRI), 135L40K 135 Watt 4000K LED (82 CRI)
    (3) Doorframe Options - 5F 18-Ga Type 304 SS (STD), 2F 18-Ga CRS, XF 18-Ga Type 316
        SS, PAF .063" Painted Fabricated Aluminum
    (4) Housing Options - 2H 20-Ga CRS (STD)
    (5) Options - FS Fuse & Holder, RF Radio Frequency Filter
[2] NSF Certified production beginning with date code March 11, 2016.



 
AFS All-American Millwork and Fabrication LLC 
735 Florence Road
Savannah, TN 38372 
United States 
731-925-2200

Facility : Savannah, TN


Equipment custom built in compliance with NSF Standard 2‡

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products
  except for the following:
  Custom open top heated drop-in pans, open top refrigerated drop-in cold pans, reach-in
  refrigerators, and refrigerated prep tables.

COMPONENTS:

Drop-in Slim Line Ice Chilled Pans[1]
  ICP100-SL
  ICP200-SL
  ICP300-SL
  ICP400-SL
  ICP500-SL
  ICP600-SL
 
[1] Not performance tested for the holding of potentially hazardous foods.



 
AGC Lighting Co., Ltd. 
Building A, Jian'an Road No.3, Fuyong
Bao'an District, Shenzhen 
Guangdong 
China 
86 755 3358 1001
Visit this company's website

Facility : Shenzhen, China


Light Fixture for Splash and Non-food Zone

LED High Bay Light
  HB06-100
  HB06-100/G
  HB06-100/GT
  HB06-100/T
  HB06-120
  HB06-120/G
  HB06-120/GT
  HB06-120/T
  HB06-150
  HB06-150/G
  HB06-150/GT
  HB06-150/T
  HB06-200
  HB06-200/G
  HB06-200/GT
  HB06-200/T
  HB21-(1)(2)-(3)-(4)[1]
 
[1] (1) Can be any number to represent wattage.
    (2) Can be any number, letter , slash or blank to represent function or input voltage.
    (3) May be any number, letter or blank to represent CCT and CRI.
    (4) May be any number, letter or blank to represent emission angle.



 
Akro-Mils Inc 
1554 South Main Street
Akron, OH 44301 
United States 
300-761-6326

Facility : # 2 China


Catalog Items for Shelving Acceptable for Dry Storage and Heated Environments Only

Chrome Plated Knockdown Shelving[1]
  AWS(1)(2)(3)
 
[1] (1) Width of shelf
    (2) Length of shelf
    (3) Indicates "AWP" height of upright and "UPRIGHT"



 
Alabama Heating & Rfg. Co., Inc. 
313 Snow Drive
Birmingham, AL 35209 
United States 
205-945-9654

Facility : Birmingham, AL


Ventilation Hoods Custom Built in Compliance with NSF Standard 2

SC Models
  Length 4'0" to 12'0"
  Width 4'0" to 6'0"

EO Models
  Length 4'0" to 12'0"
  Width 4'0" to 6'0"



 
Aladdin Temp-Rite 
P.O. Box 100888
Nashville, TN 37224 
United States 
800-888-8018

Facility : # 1 USA


Dollies

Self Leveling Pellet Heater
  IMX200
  IMX300
  WPH300
  WPH400

Tray Cart
  ET(1)(2)(3)(4)[2]
  ET(1)APT[1]
  ET(1)PT[1]
  ET20A
  ET20AND
  ET24A
  ET24AND
  RS10
  RS1615205
  RS161552155
  RS2015205
  RS201552155
  RS7
  RSPT20
  RSPT21
 
[1] (1) Denotes tray capacity of the cart.
[2] (1) Tray capacity
    (2) Tray width (inches)
    (3) Tray depth (inches)
    (4) Tray spacing

Carts

Tray Dispensing Cart
  TDD150
  TDD350
  TDS150
  TDS350



 
Aladdin Temp-Rite LLC 
250 East Main Street
Hendersonville, TN 37075 
United States 
800-888-8018 
615-748-3275
Visit this company's website

Facility : # 2 USA


Dish Dispenser
  PD2WNH
  PD3WNH

Dome Rack
  SR[1]
  SRF[2]
 
[1] Can be followed by two digits indicating the number of domes.
[2] Can be followed by two digits indicating the number of shelves.

Dome Rack for Dry Environments Only
  DSR-100
  DSR-150
  DSR-50

Enclosed Tray Carter[3]
  MD(1)(2)(3)(4)(5)(6)(7)(8)
  MD(1)(2)(3)RS(4)(5)(6)(7)(8)
 
[3] With suffixes:      
    (1) Meal capacity      
    (2) Orientation
        EL - End load
        SL - Slide load      
    (3) Bumpers
        A - Metal
        P - Plastic      
    (4) Caster size - Note: These are NSF Certified Casters.      
    (5) Caster type 
        B - Balloon 
        P - Poly      
    (6) Caster quantity      
    (7) "-"(Dash) - Standard
        "P" - Pass through      
    (8) Tray spacing multiplied by 10: Example - 4.5" spacing = 45

Food Service Cart
  ET(1)APT(2)[4] [5]
  ET(1)PT(2)[4] [5] [6]
  RS10[4]
  RS7[4]
  RSPT(1)(2)[4] [7]
  RSPT20[4]
  RSPT21[4]
  SC(1)(2)-(3)(4)[8]
 
[4] Suffix number for diameter of the caster wheel.
[5] (1) 24 or 30 for cart capacity.
    (2) T - Available with optional tow hitch.
[6] Serial number beginning with 'C'.
[7] (1) Number of meals: 4 to 36
    (2) Tray width: 18" to 22". Note: This may be shown as being a three digit number;
    Example: 185 = 18.5".
[8] (1) Number of trays
    (2) E - End load
        S - Side load
    (3) Tray spacing (example 5.25" = 525)
    (4) Options (may have multiple options)
        D - Drain
        G - Rigid caster handle end
        P - Pass thru
        R - Top rail
        S - All swivel
        T - Tow hitch

Heat-on-Demand™ On-Tray[9]
 
[9] Available in color code 1HT25X, where the last letter indicates the color: B - Burgundy,
    E - Evening blue, G - Gray, H - Harvest green, I - Ivory, K - Black, M - Mauve, or T -
    Teal.

Meal Deliver and Retrieval Cart
  AGV(1)M(2)[10]
  ET20A(1)(2)[4] [11]
  ET24A(1)(2)[4] [11]
  RS(1)(2)(3)T[12]
 
[4] Suffix number for diameter of the caster wheel.
[10] (1) Number of trays
     (2) Available with or without security latch
[11] (1) Caster diameter in inches.
     (2) T - Available with optional tow hitch.
[12] Including numeric suffixes as follows:
     (1) Two digits for number of meals capacity
     (2) Four digits for tray size
     (3) One digit for tray spacing
     T - Available with optional tow hitch

Over Shelf
  INDAT10OS

Pellet Base
  Heat-On-Demand™ Advantage - Splash Contact Only[13]
  Heat-on-Demand™ - Splash Contact Only[14]
  Heat-on-Demand™ Ultra - Splash Contact Only[15]
  Insul Max™[16]
 
[13] Available in: IHB26X, where the last letter indicates the color: B - Burgundy, E -
     Evening blue, F - Sapphire, G - Gray, H - Harvest green, K - Black, L - Sterling, M -
     Sea Mist, N - Nutmeg, P - Bronze, S - Sage, T - Teal, or U - Tungsten.
[14] Available in color codes IHB21X, where the last letter indicates the color: B -
     Burgundy, E - Evening blue, F - Sapphire, G - Gray, H - Harvest green, I - Ivory, K -
     Black, L- Sterling, M - Mauve, N - Nutmeg, P - Bronze, S - Sage, T - Teal, or U-
     Tungsten.
[15] Available in color code IHB21X and IHB24X, where the last letter indicates the color: B
     - Burgundy, E - Evening blue, F - Sapphire, G - Gray, H - Harvest green, K - Black, L -
     Sterling, M - Mauve, N - Nutmeg, P - Bronze, S - Sage, T - Teal, or U - Tungsten.
[16] Available in color codes: IMCB26X, where the last letter indicates the color: B –
     Burgundy, E – Evening Blue, G- Gray, F - Sapphire, K – Black,  L - Sterling, T – Teal,
     or U – Tungsten.

Rapid Serve Induction System Base - Splash Contact Only
  RS[15]
 
[15] Available in color code IHB21X and IHB24X, where the last letter indicates the color: B
     - Burgundy, E - Evening blue, F - Sapphire, G - Gray, H - Harvest green, K - Black, L -
     Sterling, M - Mauve, N - Nutmeg, P - Bronze, S - Sage, T - Teal, or U - Tungsten.

Starter Station
  SS3L

Tray Dispensing Cart
  TDD150
  TDD350
  TDS150
  TDS350

Tray Make-Up Work Table
  RST (1)(2)(3)[17]
  WT(1)(2)(3)[17]
 
[17] (1) Length in inches
     (2) Depth in inches
     (3) Number of shelves

Work Table
  INDAT10C
  INDAT10L

Meal Distribution Systems[18]

Bravo Series Covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite
  Teal/Ivory

Bravo Series Servers available in the following colors:
  Cream/Cream
  Granite/Granite
  Gray/Gray
  Ivory/Ivory
  Mauve/Mauve

Century I Series Covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite
  Teal/Ivory

Century I Series Servers available in the following colors:
  Cream/Cream
  Granite/Granite
  Gray/Gray
  Ivory/Ivory
  Mauve/Mauve

Century II Series Covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Honey/Cream
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite
  Teal/Ivory

Century II Servers available in the foolowing colors:
  Cream/Cream
  Granite/Granite
  Gray/Gray
  Ivory/Ivory
  Mauve/Mauve

Cosmo I Series Covers available in the following colors:
  Cream/Cream
  Gray/Gray
  Gray/Ivory
  Ivory/Ivory
  Mauve/Ivory
  Mauve/Mauve
  Teal/Ivory
  Teal/Teal

Cosmo I Series Servers available in the following colors:
  Cream/Cinnamon
  Cream/Cream
  Gray/Gray
  Ivory/Gray
  Ivory/Ivory
  Ivory/Mauve
  Ivory/Teal
  Mauve/Mauve
  Teal/Teal

Cosmo II Series Partial covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Honey/Cream
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite

Cosmo II Series Servers available in the following colors:
  Cream/Cream
  Granite/Granite
  Ivory/Ivory

Covers available in the following colors:
  Cream/Cream
  Gray/Gray
  Gray/Ivory
  Ivory/Ivory
  Mauve/Ivory
  Mauve/Mauve
  Teal/Ivory
  Teal/Teal

Genie Series Servers available in the following colors:
  Cream/Cinnamon
  Cream/Cream
  Gray/Gray
  Ivory/Gray
  Ivory/Ivory
  Ivory/Mauve
  Ivory/Teal
  Mauve/Mauve
  Teal/Teal

Metro II Series Partial covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite

Metro II Series Servers available in the following colors:
  Cream/Cream
  Granite/Granite
  Ivory/Ivory

Skandia Series Full covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Honey/Cream
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite
  Teal/Ivory

Skandia Series Partial covers available in the following colors:
  Blue/Ivory
  Cinnamon/Cream
  Granite/Granite
  Gray/Granite
  Gray/Ivory
  Honey/Cream
  Mauve/Granite
  Mauve/Ivory
  Mocha/Cream
  Teal/Granite
  Teal/Ivory

Skandia Series Servers available in the following colors:
  Cream/Cream
  Granite/Granite
  Gray/Gray
  Ivory/Ivory
  Mauve/Mauve

Temp-Rite II Excel Series[19] [20]
  Black
  Blue
  Evening Blue
  Gray
  Ivory
  Mauve
  Teal
 
[19] The domes are exempt from marking requirements. They are to be sold as a unit with the
     "Temp-Rite Excel Series" server which does bear the Mark.
[20] Entree domes and soup domes available in the following colors:

Temp-Rite II Excel Series Servers available in the following colors:
  Black
  Ivory

Temp-Rite II Series Covers available in the following colors:
  Blue/Ivory
  Ivory/Black
  Ivory/Ivory
  Mauve/Ivory
  Mocha/Ivory
  Teal/Ivory

Temp-Rite II Series Servers available in the following colors:
  Black
  Ivory

[18] The above trays are Listed for institutional use and are to be used with nonserrated
     knives. Servers and covered are acceptable when used with covered or uncovered food
     inserts. Exterior colors are Listed in the first position, interior colors are Listed in
     the second position.

COMPONENTS:

Cold Pellet Base - Splash Contact Only[21]
  Ready Chill
 
[21] Accepted for use with pre-packaged food only.

Induction Insert for Insulated Tray
  IHP22

Side Table
  INDAT10STC
  INDAT10STL



 
Albers Commercial Kitchen Services 
200 West Plato Boulevard
St. Paul, MN 55107 
United States 
651-224-5428

Facility : St. Paul, MN


Equipment custom built in compliance with NSF Standard 2‡

‡ This manufacturer is not authorized to use the NSF Mark in association with any
  electrical or gas operated products that are designed to provide safe temperatures
  during the storage, holding, rethermalization, or rapid pull down of food products.

COMPONENTS:

Custom Food Shield



 
Aldi Inc. DBA Easy Home / WORK ZONE 
1200 North Kirk Road
Batavia, IL 60510 
United States 
630-482-5297

Facility : Guangdong, China


Wire Shelving Products Acceptable for Dry Storage Only

Shelving Unit
  41193
  45397
  50064
  53534
  55365
  55366
  8361



 
ALECO (Alabama Environmental Company) 
2802 E. Avalon Avenue
Muscle Shoals, AL 35661 
United States 
800-633-3120 
256-248-2402
Visit this company's website

Facility : Muscle Shoals, AL


Strip Door Curtain
  "Maximus System"[1]
 
[1] Available in various lengths.



 
Aleddra Inc. 
2210 Lind Avenue SW
Suite 109 
Renton, WA 98057 
United States 
425-430-4555
Visit this company's website

Facility : Zhejiang Province, China


COMPONENTS:

G6 SureFit® DBA LED Tube for Splash Zone and Non Food Zone[1]
  LLT-(1)-G-T8-(2)-DBA-(3)
 
[1] (1) A numerical digit 2 or 4 indicating size in length (available in 2ft. or 4ft.)	
    (2) 8W or 15W indicating wattage	
    (3) Available in the following color options: 
        27K - 2700K
        30K - 3000K
        35K - 3500K
        40K - 4000K
        50K - 5000K
        60K - 6000K



 
Alegacy Foodservice Products Group Inc. 
12683 Corral Place
Santa Fe Springs, CA 90670 
United States 
800-848-4440 
562-320-3100

Facility : # 5 China


French Whip/French Whisk
  FW10NSF
  FW12NSF
  FW14NSF
  FW16NSF
  FW18NSF
  FW20NSF
  FW22NSF
  FW24NSF

Piano Whip/Piano Whisk
  PW10NSF
  PW12NSF
  PW14NSF
  PW16NSF
  PW18NSF
  PW8NSF



 
Alegacy Foodservice Products Group, Inc. 
12683 Corral Place
Santa Fe Springs, CA 90670 
United States 
562-320-3100

Facility : # 1 Vietnam


Steam Table Pans

Full Size Sectional Steam Table Pan
  2002 - Heavy 2 1/2"
  2002P - Heavy 2 1/2" Perforated
  2004 - Heavy 4"
  2004P - Heavy 4" Perforated
  2006 - Heavy 6"
  2006P - Heavy 6" Perforated
  8002 - Light 2 1/2"
  8002P - Light 2 1/2" Perforated
  8004 - Light 4"
  8004P - Light 4" Perforated
  8006 - Light 6"
  8006P - Light 6" Perforated

Two Thirds Size Sectional Steam Table Pan
  2232 - Heavy 2 1/2"
  2234 - Heavy 4"
  2236 - Heavy 6"
  8232 - Light 2 1/2"
  8234 - Light 4"
  8236 - Light 6"

Half Size Sectional Steam Table Pan
  2122 - Heavy 2 1/2"
  2122P - Heavy 2 1/2" Perforated
  2124 - Heavy 4"
  2124P - Heavy 4" Perforated
  2126 - Heavy 6"
  2126P - Heavy 6" Perforated
  8122P - Light 2 1/2" Perforated
  8122STP - Light 2 1/2"
  8124 - Light 4"
  8124P - Light 4" Perforated
  8126 - Light 6"
  8126P - Light 6" Perforated

One Third Size Sectional Steam Table Pan
  2132 - Heavy 2 1/2"
  2134 - Heavy 4"
  2136 - Heavy 6"
  8132 - Light 2 1/2"
  8134 - Light 4"
  8136 - Light 6"

One Quarter Size Sectional Steam Table Pan
  2142 - Heavy 2 1/2"
  2144 - Heavy 4"
  2146 - Heavy 6"
  8142 - Light 2 1/2"
  8144 - Light 4"
  8146 - Light 6"

One Sixth Size Sectional Steam Table Pan
  2162 - Heavy 2 1/2"
  2164 - Heavy 4"
  2166 - Heavy 6"
  8162 - Light 2 1/2"
  8164 - Light 4"
  8166 - Light 6"

One Ninth Size Sectional Steam Table Pan
  2192 - Heavy 2 1/2"
  2194 - Heavy 4"
  8192 - Light 2 1/2"
  8194 - Light 4"

Anti-Jam Full Size Pan - Heavy Gauge
  22002 - 2 1/2"
  22004 - 4"
  22006 - 6"

Anti-Jam Half Size Pan - Heavy Gauge
  22122 - 2 1/2"
  22124 - 4"
  22126 - 6"

Anti-Jam One Third Size Pan - Heavy Gauge
  22132 - 2 1/2"
  22134 - 4"
  22136 - 6"

Anti-Jam One Quarter Size Pan - Heavy Gauge
  22142 - 2 1/2"
  22144 - 4"
  22146 - 6"

Anti-Jam One Sixth Size Pan - Heavy Gauge
  22162 - 2 1/2"
  22164 - 4"
  22166 - 6"

Anti-Jam One Ninth Size Pan - Heavy Gauge
  22192 - 2 1/2"
  22194 - 4"

Anti-Jam Full Size Sectional Steam Table Pan[1]
  88002 - 2 1/2"
  88002P - 2 1/2" Perforated
  88004 - 4"
  88004P - 4" Perforated
  88006 - 6"
  88006P - 6" Perforated
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Anti-Jam Two Thirds Size Sectional Steam Table Pan[1]
  88232 - 2 1/2"
  88234 - 4"
  88236 - 6"
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Anti-Jam Half Size Sectional Steam Table Pan[1]
  88122 - 2 1/2"
  88122P - 2 1/2" Perforated
  88124 - 4"
  88124P - 4" Perforated
  88126 - 6"
  88126P - 6" Perforated
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Anti-Jam One Third Size Sectional Steam Table Pan[1]
  88132 - 2 1/2"
  88134 - 4"
  88136 - 6"
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Anti-Jam One Quarter Size Sectional Steam Table Pan[1]
  88142 - 2 1/2"
  88144 - 4"
  88146 - 6"
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Anti-Jam One Sixth Size Sectional Steam Table Pan[1]
  88162 - 2 1/2"
  88164 - 4"
  88166 - 6"
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Anti-Jam One Ninth Size Sectional Steam Table Pan[2]
  88192 - 2 1/2"
  88194 - 4"
 
[2] Available in 0.7 mm thickness.

Half Long Size Sectional Steam Table Pan
  22244L - 4"

Anti-Jam Full Size Steam Table Pan
  5002 - 2 1/2"[3]
  5002P - 2 1/2" Perforated[3]
  5004 - 4"[3]
  5004P - 4" Perforated[3]
  5006 - 6"[3]
  5006P - 6" Perforated[3]
  7002 - 2 1/2"[2]
  7002P - 2 1/2" Perforated[2]
  7004 - 4"[2]
  7004P - 4" Perforated[2]
  7006 - 6"[2]
  7006P - 6" Perforated[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Anti-Jam Two Thirds Size Steam Table Pan
  5232 - 2 1/2"[3]
  5234 - 4"[3]
  5236 - 6"[3]
  7232 - 2 1/2"[2]
  7234 - 4"[2]
  7236 - 6"[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Anti-Jam Half Size Steam Table Pan
  5122 - 2 1/2"[3]
  5122P - 2 1/2" Perforated[3]
  5124 - 4"[3]
  5124P - 4" Perforated[3]
  5126 - 6"[3]
  5126P - 6" Perforated[3]
  7122P - 2 1/2" Perforated[2]
  7122STP - 2 1/2"[2]
  7124P - 4" Perforated[2]
  7124STP - 4"[2]
  7126 - 6"[2]
  7126P - 6" Perforated[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Anti-Jam One Third Size Steam Table Pan
  5132 - 2 1/2"[3]
  5134 - 4"[3]
  5136 - 6"[3]
  7132 - 2 1/2"[2]
  7134 - 4"[2]
  7136 - 6"[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Anti-Jam One Quarter Size Steam Table Pan
  5142 - 2 1/2"[3]
  5144 - 4"[3]
  5146 - 6"[3]
  7142 - 2 1/2"[2]
  7144 - 4"[2]
  7146 - 6"[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Anti-Jam One Sixth Size Steam Table Pan
  5162 - 2 1/2"[3]
  5164 - 4"[3]
  5166 - 6"[3]
  7162 - 2 1/2"[2]
  7164 - 4"[2]
  7166 - 6"[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Anti-Jam One Ninth Size Steam Table Pan
  5192 - 2 1/2"
  5194 - 4"
  7192 - 2 1/2"
  7194 - 4"

COMPONENTS:

Full Size Sectional Steam Table Pan Cover[1]
  CP8002 -Cover
  CP8002NC - Cover
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Two Thirds Size Sectional Steam Table Pan Cover[1]
  CP8232 - Cover
  CP8232NC - Cover
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

Half Size Sectional Steam Table Pan Cover[1]
  CP8122 - Cover
  CP8122NC - Cover
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

One Third Size Sectional Steam Table Pan Cover[1]
  CP8132 - Cover
  CP8132NC - Cover
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

One Quarter Size Sectional Steam Table Pan Cover[1]
  CP8142 - Cover
  CP8142NC - Cover
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

One Sixth Size Sectional Steam Table Pan Cover[1]
  CP8162 - Cover
  CP8162NC - Cover
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.

One Ninth Size Sectional Steam Table Pan Cover[2]
  CP8192 - Cover
  CP8192NC - Cover
 
[2] Available in 0.7 mm thickness.

Full Size Steam Table Pan Cover
  CP2002[1]
  CP2002NC[1]
  CP5002[3]
  CP5002NC[3]
  CP7002[2]
  CP7002NC[2]
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Two Thirds Size Steam Table Pan Cover
  CP5232[3]
  CP5232NC[3]
  CP7232[2]
  CP7232NC[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Half Size Steam Table Pan Cover
  CP2122[1]
  CP2122NC[1]
  CP5122[3]
  CP5122NC[3]
  CP7122[2]
  CP7122NC[2]
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

One Third Size Steam Table Pan Cover
  CP2132[1]
  CP2132NC[1]
  CP5132[3]
  CP5132NC[3]
  CP7132[2]
  CP7132NC[2]
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

One Quarter Size Steam Table Pan Cover
  CP2142[1]
  CP2142NC[1]
  CP5142[3]
  CP5142NC[3]
  CP7142[2]
  CP7142NC[2]
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

One Sixth Size Steam Table Pan Cover
  CP2162[1]
  CP2162NC[1]
  CP5162[3]
  CP5162NC[3]
  CP7162[2]
  CP7162NC[2]
 
[1] Available in 0.6 mm, 0.7 mm, and 0.8 mm thickness.
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

One Ninth Size Steam Table Pan Cover
  CP5192[3]
  CP5192NC[3]
  CP7192[2]
  CP7192NC[2]
 
[2] Available in 0.7 mm thickness.
[3] Available in 0.5 mm thickness.

Aluminum Brazier[4]
  ABR15
  ABR18
  ABR24
 
[4] Last 2 digits denote pot volume.

Aluminum Sauce Pot[4]
  ASP14
  ASP20
  ASP26
  ASP34
  ASP40
 
[4] Last 2 digits denote pot volume.

Aluminum Stock Pot[5]
  AP10
  AP100
  AP12
  AP120
  AP140
  AP16
  AP160
  AP20
  AP24
  AP32
  AP40
  AP60
  AP80
 
[5] Last 3 digits denote pot volume.

Aluminum Stock Pot Cover[5] [6]
  APC10
  APC100
  APC12
  APC120
  APC140
  APC16
  APC160
  APC20
  APC24
  APC32
  APC40
  APC60
  APC80
 
[5] Last 3 digits denote pot volume.
[6] Letter 'C' denotes pot cover.



 
Alegacy Foodservice Products Group, Inc. 
12683 Corral Place
Santa Fe Springs, CA 90670 
United States 
562-320-3100

Facility : # 2 China


Stock Pot with Lid
  SSSP100
  SSSP12
  SSSP16
  SSSP20
  SSSP24
  SSSP32
  SSSP40
  SSSP60
  SSSP8
  SSSP80

Stainless Steel Frypan without Lid
  SSFP11
  SSFP12
  SSFP14
  SSFP8
  SSFP9

Stainless Steel Frypan with Non-Stick
  SSFPC11
  SSFPC12
  SSFPC14
  SSFPC8
  SSFPC9

Stainless Steel Saucepan with Lid
  SSSP10
  SSSP2
  SSSP3
  SSSP4
  SSSP6
  SSSP7

Stainless Steel Braziers with Lid
  SSBR15
  SSBR20
  SSBR25
  SSBR30

Stainless Steel Double Boiler
  21SSDB12
  21SSDB16
  21SSDB20
  21SSDBI12
  21SSDBI20
  21SSDBP12
  21SSDBP20

Stainless Steel Paste Cooker
  21SSPC12
  21SSPC16
  21SSPC20
  21SSPC8

Stainless Steel Cover
  21SSDBC12
  21SSDBC16
  21SSDBC20
  21SSDBC8



Alegacy Foodservice Products Group, Inc. 
12683 Corral Place
Santa Fe Springs, CA 90670 
United States