NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 22, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/food/Listings.asp?TradeName=slicer&Standard=008&


NSF/ANSI 8
Commercial Powered Food Preparation Equipment



 
A.B.M. Company S.R.L. 
Via Rho 6
20020 Lainate (Milano) 
Italy 
39 029 373781
Visit this company's website

Facility : Lainate (Milano), Italy


Gravity Slicer
  B300M[1]
  B350A[2]
  B350Comfort[1]
  B350M[1]
 
[1] Certified to NSF/ANSI 8–2010.
[2] Certified to NSF/ANSI 8–2010 starting from serial number 12337.



 
AB Hallde Maskiner 
Skalhotsgatan 4 Box 1165
S-16426 Kista 
Sweden 
46 8 5877 3000
Visit this company's website

Facility : Kista, Sweden


COMPONENTS:

Accessories for RG-100, RG-200, RG-250, RG-300, RG350 and RG-400 Cutter
  Fine Cut Slicer One Knife (FCS1)
  Fine Cut Slicer Twoknives (FCS2)
  Standard Slicer (SS)



 
Alfa International Corporation 
4 Kaysal Place
Armonk, NY 10504 
United States 
800-327-2532 
914-273-2222

Facility : # 1 Taiwan


Vegetable Slicer Accessories

Twoyco Complete Vegetable Slicer Attachment[1]
  VS-888
 
[1] Beginning with serial number: 1210000

Twoyco Complete Vegetable Slicer Attachment with Disc Holder VS-1200DH[2]
  GS-12
 
[2] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64"

Twoyco Complete Vegetable Slicer Attachment with Disc Holder VS-1200DH22[2]
  GS-22
 
[2] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64"

Twoyco Complete Vegetable Slicer Attachment with Slicer Attachment VS-1200KDS[3]
  VS-12
 
[3] With "S" stainless steel knife

Twoyco Complete Vegetable Slicer Attachment with Slicer Attachment VS-1200KDS22[3]
  VS-22
 
[3] With "S" stainless steel knife

Vegetable Slicer Attachment [3]
  VS-12DH
  VS-12GD
  VS-12KDS
  VS-12SD[2]
  VS-22DH - Disc Holder, #22 Power Hubs
  VS-22H - Housing, #22 Power Hubs
  VS-22KDS - Slicer Holder, #22 Power Hubs
  VS-99D
  VS-99H
  VS-99P
 
[2] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64"
[3] With "S" stainless steel knife



 
Aroma Taiwan Machinery Company 
P.O. Box 46-110
Taichung 408 
Taiwan 
886 4 269 13600

Facility : Changshan, Fujian, China


Vegetable Slicer
  ARM-02BV



 
Axis Equipment Co. 
5659 Royalmount Avenue
Montreal, QC H4P 2P9 
Canada 
514-737-9701

Facility : Varese, Italy


Gravity Slicer[1]
  AX-S 510/N
  AX-S 520/N
  AX-S 521/N
  AX-S C12/N
  AX-S C12E/N
  AX-S C12F/N
  AX-S C13/N
  AX-S C13E/N
  AX-S C13F/N
  AX-S C14/N
  AX-S C14E/N
  AX-S C14F/N
  AX-S C15/N
  AX-S CA12/N
  AX-S CA12E/N
  AX-S CA12F/N
  AX-S CA13/N
  AX-S CA13E/N
  AX-S CA13F/N
  AX-S CA14/N
  AX-S CA14E/N
  AX-S CA14F/N
  AX-S CA15/N
  AX-S CXM12/N
  AX-S CXM12E/N
  AX-S CXM12F/N
  AX-S CXM13/N
  AX-S CXM13E/N
  AX-S CXM13F/N
  AX-S CXM14/N
  AX-S CXM14E/N
  AX-S CXM14F/N
  AX-S CXM15/N
  AX-S GL10/N
  AX-S GL10E/N
  AX-S GL10F/N
  AX-S GL10F/N
  AX-S GL11/N
  AX-S GL12/N
  AX-S GL12E/N
  AX-S GL12F/N
  AX-S GL12F/N
  AX-S GLA10/N
  AX-S GLA10E/N
  AX-S GLA12/N
  AX-S GLA12E/N
  AX-S GLM10/N
  AX-S GLM10E/N
  AX-S GLM10F/N
  AX-S GLM12/N
  AX-S GLM12E/N
  AX-S GLM12F/N
  AX-S M12/N
  AX-S M14/N
  AX-S SPST/N
  AX-S SPSTARTAUTO/N
  AX-S ST10/N
  AX-S ST12/N
  AX-S ST12HD/N
  AX-S ST9/N
  AX-S STARTAUTO/N
  AX-S STL12/N
  AX-S VS10/N
  AX-S VS10F/N
  AX-S VS12/N
  AX-S VS12F/N
  AX-S VS9/N
  AX-S10/N
  AX-S10F/N
  AX-S11/N
  AX-S12/N
  AX-S12A/NR
  AX-S12AF/NR
  AX-S12AF/NR
  AX-S12F/N
  AX-S12F/NR
  AX-S13/N
  AX-S13A/NR
  AX-S13F/N
  AX-S13F/NR
  AX-S14/N
  AX-S14A/NR
  AX-S14AF/NR
  AX-S14F/N
  AX-S14F/NR
  AX-S7/N
  AX-S9/N
  AX-SA300/N
  AX-SA30F/N
  AX-SA330/N
  AX-SA33F/N
  AX-SA350/N
  AX-SA35F/N
  AX-SD10/N
  AX-SD10F/NR
  AX-SD12/N
  AX-SD12A/NR
  AX-SD12AF/NR
  AX-SD12F/N
  AX-SD12F/NR
  AX-SD9/N
  AX-SD9F/N
  AX-SD9F/NR
  AX-SOG9/N
  AX-SOG9F/N
  AX-SP12/N
  AX-SP12F/NR
  AX-SP13/N
  AX-SP13F/NR
  AX-SP14/N
  AX-SP14A/NR
  AX-SP14AF/NR
  AX-SP14F/NR
  AX-SS10/N
 
[1] Certified to NSF/ANSI 8–2010 starting from serial number 3243.



 
Berkel Company 
701 South Ridge Avenue
Troy, OH 45374 
United States 
937-332-3000
Visit this company's website

Facility : La Porte, IN


Bread Slicer
  MB 1/2
  MB 3/4
  MB 3/8
  MB 7/16
  MB 9/16



 
Berkel Company 
701 South Ridge Avenue
Troy, OH 45374 
United States 
937-332-3000

Facility : Solbiate Arno (VA), Italy


Slicer
  823E-PLUS
  825A-PLUS[1]
  825E-PLUS
  827A-PLUS [2]
  827E-PLUS[3]
  829A-PLUS[4]
  829E-PLUS[5]
 
[1] Certified to NSF/ANSI 8–2010 starting from serial number 1020214.
[2] Certified to NSF/ANSI 8–2010 starting from serial number 1020756.
[3] Certified to NSF/ANSI 8–2010 starting from serial number 1019547.
[4] Certified to NSF/ANSI 8–2010 starting from serial number 1021346.
[5] Certified to NSF/ANSI 8–2010 starting from serial number 1020487.



 
Biro Manufacturing Company (The) 
1114 W Main Street
Marblehead, OH 43440 
United States 
419-798-4451

Facility : Marblehead, OH


Horizontal Slicer[2] [3]
  109PC
  109PCM[4]
 
[2] Beginning with serial number 418.
[3] Available with take away conveyor option.
[4] Beginning with serial number 2068.



 
Centaur 
200 West 22nd Street
Suite 240 
Lombard, IL 60148 
United States 
630-963-9501

Facility : # 1 Italy


Food Slicer[1]
  209-1
  210-1
  212-1
 
[1] Certified to NSF/ANSI 8-2010.



 
Dutchess Bakers' Machinery Co., Inc. 
302 Grand Avenue
P.O. Box 39 
Superior, WI 54880 
United States 
715-394-4444
Visit this company's website

Facility : Superior, WI


Bread/Bun and Bagel Slicer
  M-260
  M-260E
  M-270
  M-270C
  M-270CE
  M-270E



 
Globe Food Equipment Company 
2253 Dryden Road
Dayton, OH 45439 
United States 
800-347-5423 
937-299-5493
Visit this company's website

Facility : Cura Carpignano - Pavia, Italy


Food Slicer
  CP220[1]
  CP250[1]
  CP300[1]
  E220[1]
  E250[1]
  E300[1]
  E300D[1]
  ER220[1]
  ER250[1]
  ER300[1]
  ER300D[1]
  SBS10-1[1]
  SBS12-1[1]
  SBS9-1[1]
 
[1] Certified to NSF/ANSI 8–2010.


Facility : Gallarate, Italy


Meat and Cheese Slicer
  C10[1]
  C12[2]
  C9[3]
  G10[4]
  G12[5]
  G12A[6]
  G14[7]
  SCR12[8]
 
[1] Certified to NSF/ANSI 8 - 2010 with beginning serial number 250000.
[2] Certified to NSF/ANSI 8 - 2010 with beginning serial number 350000.
[3] Certified to NSF/ANSI 8 - 2010 with beginning serial number 150000.
[4] Certified to NSF/ANSI 8 - 2010 with beginning serial number 450000.
[5] Certified to NSF/ANSI 8 - 2010 with beginning serial number 550000.
[6] Certified to NSF/ANSI 8 - 2010 with beginning serial number 650000.
[7] Certified to NSF/ANSI 8 - 2010 with beginning serial number 950000.
[8] Certified to NSF/ANSI 8 - 2010 with beginning serial number 850000.


Facility : Bydgoszcz, Poland


Slicer
  GC512[1]
 
[1] Certified to NSF/ANSI 8-2010 with beginning Serial Number 540000.



 
Hobart Corporation 
World Headquarters
701 South Ridge Avenue 
Troy, OH 45374 
United States 
937-332-2651
Visit this company's website

Facility : Kista, Sweden


COMPONENTS:

Accessories for FP-100, FP-150, FP-200, FP-250, FP-300, FP350
  Fine Cut Slicer One Knife (FCS1)
  Fine Cut Slicer Two Knives (FCS2)
  Standard Slicer (SS)



 
Hobart Corporation 
World Headquarters
701 South Ridge Avenue 
Troy, OH 45374 
United States 
937-332-2621
Visit this company's website

Facility : Hillsboro, OH


Deli Slicer[1] [2]
  HS6
  HS7
  HS8
  HS9
 
[1] Certified to NSF/ANSI 8-2012.
[2] Model number maybe followed by N suffix.

Vegetable Slicer[6]
  VS9
 
[6] NSF Component Mark accepted as NSF-8.



 
Hobart Corporation 
701 South Ridge Avenue
Troy, OH 45374 
United States 
937-332-2621

Facility : Solbiate Arno (VA), Italy


Slicer
  Edge12-(1)[1] [2]
 
[1] Certified to NSF/ANSI 8–2010.
[2] (1) - Additional digit indicating motor type.



 
Noaw S.R.L. 
Via Colombera, 27
21048 Solbiate Arno (VA) 
Italy 
39 0331 219723
Visit this company's website

Facility : Solbiate Arno (VA), Italy


Slicer
  30-E[1] [2]
  300G[3]
  350G[4]
  350G48[5]
  EDGE-(1)[6] [8]
  T4-S[7]
  TAS
  TWS
 
[1] Models are NSF Certified from serial number 15,000.
[2] Certified to NSF/ANSI 8–2010 starting from serial number 1019547.
[3] Certified to NSF/ANSI 8–2010 starting from serial number 1020756.
[4] Certified to NSF/ANSI 8–2010 starting from serial number 1020487.
[5] Certified to NSF/ANSI 8–2010 starting from serial number 1021346.
[6] Certified to NSF/ANSI 8–2010.
[7] Certified to NSF/ANSI 8–2010 starting from serial number 1020214.
[8] (1) - Additional digit indicating motor type.



 
Oliver Packaging & Equipment Company 
3236 Wilson Drive Northwest
Walker, MI 49534 
United States 
616-356-2950
Visit this company's website

Facility : Walker, MI


Bread Slicer
  732-N
  735-N
  738
  738-V
  748-N
  758-N
  777-N
  777-NT
  797-32N
  797-32NC
  797-48N
  797-48NC

Bun/Bagel Slicer
  702-N
  702-NSE
  702-NSS
  704-N
  705-N
  723

COMPONENTS:

Bread Slicer Blade[1]
  0797-0029-1
  0797-0029-103
  0797-0029-8
  0797-2090-XXX[2] [3]
 
[1] The NSF Mark and model number will appear on packaging.
[2] NSF Certified models are produced after September 27, 2006.
[3] XXX - Blade width.



 
Omas S.P.A. 
Via 4 Novembre 6
I-21040 Oggiona S. Stefano (Varese) 
Varese 
Italy 
39 03 31214311

Facility : Varese, Italy


Gravity Slicer[1]
  10.25/N
  10.27/N
  10.30/N
  10.30A/NR
  10.30AF/NR
  10.30F/N
  10.30F/NR
  12.30/N
  12.30A/NR
  12.30AF/NR
  12.30F/N
  12.30F/NR
  12.33/N
  12.33A/NR
  12.33AF/NR
  12.33F/N
  12.33F/NR
  12.35/N
  12.35A/NR
  12.35AF/NR
  12.35F/N
  12.35F/NR
  14.30/N
  14.30F/NR
  14.33/N
  14.33F/NR
  14.35/N
  14.35A/NR
  14.35AF/NR
  14.35F/NR
  510/N
  520/N
  521/N
  81/N
  82/N
  82F/N
  82F/NR
  83/N
  84/N
  84F/N
  84F/NR
  85/N
  A300/N
  A30F/N
  A330/N
  A33F/N
  A350/N
  A35F/N
  C-300/N
  C-330/N
  C-350/N
  C-370/N
  C30E/N
  C30F/N
  C33E/N
  C33F/N
  C35E/N
  C35F/N
  CA300/N
  CA30E/N
  CA30F/N
  CA330/N
  CA33E/N
  CA33F/N
  CA350/N
  CA35E/N
  CA35F/N
  CA370/N
  CX-Matic 300/N
  CX-Matic 30E/N
  CX-Matic 30F/N
  CX-Matic 330/N
  CX-Matic 33E/N
  CX-Matic 33F/N
  CX-Matic 350/N
  CX-Matic 35E/N
  CX-Matic 35F/N
  CX-Matic 370/N
  GL-250/N
  GL-275/N
  GL-300/N
  GL-Matic 250/N
  GL-Matic 25E/N
  GL-Matic 25F/N
  GL-Matic 300/N
  GL-Matic 30E/N
  GL-Matic 30F/N
  GL25E/N
  GL25F/N
  GL30E/N
  GL30F/N
  GLA250/N
  GLA25E/N
  GLA25F/N
  GLA300/N
  GLA30E/N
  GLA30F/N
  MONDIAL 300/N
  MONDIAL 350/N
  OG22/F/N
  OG220/N
  START 220/N
  START 250/N
  START 300 HD/N
  START 300/N
  START AUTO/N
  START-L300/NL
  SUPER START AUTO/N
  SUPER START/N
  VS220/N
  VS250/N
  VS25F/N
  VS300/N
  VS30F/N
 
[1] Certified to NSF/ANSI 8–2010 starting from serial number 3243.



 
Rheninghaus S.R.L. 
Strada del Cascinotto 139/39 L
10156 Torino 
Italy 
39 01 12237514

Facility : Varese, Italy


Gravity Slicer[1]
  10.25/N
  10.27/N
  10.30/N
  10.30A/NR
  10.30AF/NR
  10.30F/N
  10.30F/NR
  12.30/N
  12.30A/NR
  12.30AF/NR
  12.30F/N
  12.30F/NR
  12.33/N
  12.33A/NR
  12.33AF/NR
  12.33F/N
  12.33F/NR
  12.35/N
  12.35A/NR
  12.35AF/NR
  12.35F/N
  12.35F/NR
  14.30/N
  14.30F/NR
  14.33/N
  14.33F/NR
  14.35/N
  14.35A/NR
  14.35AF/NR
  14.35F/NR
  510/N
  520/N
  521/N
  81/N
  82/N
  82F/N
  82F/NR
  83/N
  84/N
  84F/N
  84F/NR
  85/N
  A300/N
  A30F/N
  A330/N
  A33F/N
  A350/N
  A35F/N
  C-300/N
  C-330/N
  C-350/N
  C-370/N
  C30E/N
  C30F/N
  C33E/N
  C33F/N
  C35E/N
  C35F/N
  CA300/N
  CA30E/N
  CA30F/N
  CA330/N
  CA33E/N
  CA33F/N
  CA350/N
  CA35E/N
  CA35F/N
  CA370/N
  CX-Matic 300/N
  CX-Matic 30F/N
  CX-Matic 330/N
  CX-Matic 33F/N
  CX-Matic 35E/N
  CX-Matic 35F/N
  GL-250/N
  GL-275/N
  GL-300/N
  GL-Matic 250/N
  GL-Matic 25E/N
  GL-Matic 25F/N
  GL-Matic 300/N
  GL-Matic 30E/N
  GL-Matic 30F/N
  GL25E/N
  GL25F/N
  GL30E/N
  GL30F/N
  GLA250/N
  GLA25E/N
  GLA25F/N
  GLA300/N
  GLA30E/N
  GLA30F/N
  MATIC 350/N
  MONDIAL 300/N
  MONDIAL 350/N
  OG220/N
  OG22F/N
  START 220/N
  START 250/N
  START 300 HD/N
  START 300/N
  START AUTO/N
  START-L300/NL
  SUPER START AUTO/N
  SUPER START/N
  VS220/N
  VS250/N
  VS25F/N
  VS300/N
  VS30F/N
 
[1] Certified to NSF/ANSI 8–2010 starting from serial number 01/13-0001.



 
The Biro Manufacturing Company 
1114 West Main Street
Marblehead, OH 43440-2099 
United States 
419-798-4451

Facility : Lainate (Milano), Italy


Gravity Slicer
  B300M[1]
  B350A[2]
  B350COMFORT[1]
  B350M[1]
 
[1] Certified to NSF/ANSI 8–2010.
[2] Certified to NSF/ANSI 8–2010 starting from serial number 12337.



 
Thunderbird Food Machinery Inc. 
4602 Brass Way
Dallas, TX 75236 
United States 
214-331-3000
Visit this company's website

Facility : Changshan, Fujian, China


Vegetable Slicer
  ARM-02BV



 
Univex Corporation 
3 Old Rockingham Road
Salem, NH 03079-2133 
United States 
800-258-6358 
603-893-6191
Visit this company's website

Facility : Salem, NH


Slicer
  1000M
  1000S
  1012M
  4509[4]
  4510[4]
  4512[4]
  6509
  6510
  6512[4]
  7510
  7512
  8512
  9512
  9512[4]
  9514[4]
  MAX 9714[4]
 
[4] Available with optional blade remover.

Univex Mixer Accessories

Vegetable Slicer[10] [11]
  VS9
  VS9H
  VS9HD
  VS9HD-Secure
 
[10] Above silcer with attachments: Grater Plate No. 14, Julienne Plate No. 25, Shredder
     Plates Nos. 9, 000, 3 and 0.
[11] With adjustable stainless steel knife(s).


Facility : Padova, Italy


Slicer
  1000M[1]
  1000S[2]
  4610[3]
  4612[3]
  6612M[3]
  6612S[3]
  7510[4]
  7512[5]
  8713M[6]
  8713S[7]
 
[1] Certified to NSF/ANSI 8-2010 starting from serial number 10123753.
[2] Certified to NSF/ANSI 8-2010 starting from serial number 10123773.
[3] Certified to NSF/ANSI 8-2010.
[4] Certified to NSF/ANSI 8-2010 starting from serial number 10123789.
[5] Certified to NSF/ANSI 8-2010 starting from serial number 10123733.
[6] Certified to NSF/ANSI 8-2010 starting from serial number 10123801.
[7] Certified to NSF/ANSI 8-2010 starting from serial number 10123821.



 
Vollrath Company, L.L.C. (The) 
Food Service Division
1236 North 18th Street 
Sheboygan, WI 53082-0611 
United States 
800-624-2051 
920-459-6558

Facility : Varese, Italy


Gravity Slicer[1]
  10.25/N
  10.27/N
  10.30/N
  10.30A/NR
  10.30AF/NR
  10.30F/N
  10.30F/NR
  12.30/N
  12.30A/NR
  12.30AF/NR
  12.30F/N
  12.30F/NR
  12.33/N
  12.33A/NR
  12.33AF/NR
  12.33F/N
  12.33F/NR
  12.35/N
  12.35A/NR
  12.35AF/NR
  12.35F/N
  12.35F/NR
  14.30/N
  14.30F/NR
  14.33/N
  14.33F/NR
  14.35/N
  14.35A/NR
  14.35AF/NR
  14.35F/NR
  510/N
  520/N
  521/N
  81/N
  82/N
  82F/N
  82F/NR
  83/N
  84/N
  84F/N
  84F/NR
  85/N
  A-310/N
  A300/N
  A30F/N
  A330/N
  A33F/N
  A350/N
  A35F/N
  C-300/N
  C-330/N
  C-350/N
  C-370/N
  C33E/N
  C33F/N
  CA33E/N
  CA33F/N
  GL-250/N
  GL-275/N
  GL-300/N
  OG22/F/N
  OG220/N
  SLM0012/N
  SLM0014/N
  SLR7009/N
  SLR7010/N
  SLR7012/N
  SLR7312/N
  SLR7512/N
  SLR7612/N
  SLR7712/N
  SLR7912/N
  VS220/N
  VS250/N
  VS25F/N
  VS300/N
  VS30F/N
 
[1] Certified to NSF/ANSI 8–2010 starting from serial number C43-00206427-0030.



 
Yu Yung Industrial Co., Ltd. 
2-7 Tsou-Tso Lun
Tan-Shui 25126, Taipei County 
Taipei,  
Taiwan 
886 22 6222 663

Facility : Taipei County, Taiwan


Vegetable Slicer Accessories

Twoyco Complete Vegetable Slicer Attachment[1]
  VS-888
 
[1] Beginning with serial number: 1210000

Twoyco Complete Vegetable Slicer Attachment with Disc Holder VS-1200DH[3]
  VS-888G
  VS-888G22
 
[3] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64"

Twoyco Complete Vegetable Slicer Attachment with Slicer Attachment VS-1200KDS[2]
  VS-888S
  VS-888S22
 
[2] With "S" stainless steel knife

Vegetable Slicer Attachments [2]
  VS-1200DH - Disc Holder
  VS-1200DH22 - Disc Holder,#22 Power Hubs
  VS-1200GD - Grate Plate
  VS-1200KDS - Slice Holder[2]
  VS-1200KDS22 - Slicer Holder,#22 Power Hubs
  VS-1200SD - Shredder Plate[3]
  VS-888D-Door
  VS-888H-Housing
  VS-888H22 - Housing,#22 Power Hubs
  VS-888P-Plate With Handle
 
[2] With "S" stainless steel knife
[2] With "S" stainless steel knife
[3] Available in the following sizes: 1/2", 5/16", 1/4", 3/16", 3/32", 5/64"


Number of matching Manufacturers is 23
Number of matching Products is 574
Processing time was 1 seconds