NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 13, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=03850&Standard=014&


NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Aquatherm GmbH 
Biggen 5
D-57439 Attendorn 
Germany 
49 272 29500
Visit this company's website

Facility : Attendorn, Germany

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
ASTM F2389

Threaded Back plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
ASTM F2389
0620158 (1/2" - 20mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
ASTM F2389
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621110 (1/2" - 20mm) x 3/4" FIP   0621111 (3/4" - 25mm) x 1/2" FIP  
0621112 (3/4" - 25mm) x 3/4" FIP   0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP  
0621116 (1 1/4" - 40mm) x 1 1/4" FIP   0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP  
0621120 (2" - 63mm) x 2" FIP   0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP  
0621211 (3/4" - 25mm) x 1/2" MIP   0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP  
0621310 (1/2" - 20mm) x 3/4" MIP   0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP  
0621317 (1 1/4" - 40mm) x 1" MIP   0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP   0621320 (1.5" - 50mm) x 1.5" MIP  
0621321 (2" - 63mm) x 1.5" MIP   0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP  
0621325 (3" - 90mm) x 3" MIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
ASTM F2389
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
ASTM F2389
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
ASTM F2389
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
CSA B137.11

Threaded Back Plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
CSA B137.11
0620158 (1/2" - 20mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
CSA B137.11
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621111 (3/4" - 25mm) x 1/2" FIP   0621112 (3/4" - 25mm) x 3/4" FIP  
0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP   0621116 (1 1/4" - 40mm) x 1 1/4" FIP  
0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP   0621120 (2" - 63mm) x 2" FIP  
0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP   0621211 (3/4" - 25mm) x 1/2" MIP  
0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP   0621310 (1/2" - 20mm) x 3/4" MIP  
0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP   0621317 (1 1/4" - 40mm) x 1" MIP  
0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP   0621320 (1.5" - 50mm) x 1.5" MIP   0621321 (2" - 63mm) x 1.5" MIP  
0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP   0621325 (3" - 90mm) x 3" MIP  
0621110 (1/2" - 20mm) x 3/4" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
CSA B137.11
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
CSA B137.11
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
CSA B137.11
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Socket
 
ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Reducer
 
ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111176 (160/125 mm) SDR 7.4
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0312530 (160 mm) SDR 9
0112531 (160 mm) SDR 11
8412530 (160 mm) SDR 17.6
0112534 (200 mm) SDR 7.4
0312534 (200 mm) SDR 9
0112535 (200 mm) SDR 11
8412534 (200 mm) SDR 17.6
0112538 (250 mm) SDR 7.4
0312538 (250 mm) SDR 9
0112539 (250 mm) SDR 11
8412538 (250 mm) SDR 17.6
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0312130 (160 mm) SDR 9
0112131 (160 mm) SDR 11
8412130 (160 mm) SDR 17.6
0112134 (200 mm) SDR 7.4
0312134 (200 mm) SDR 9
0112135 (200 mm) SDR 11
8412134 (200 mm) SDR 17.6
0112138 (250 mm) SDR 7.4
0312518 (250 mm) SDR 9
0112139 (250 mm) SDR 11
8412138 (250 mm) SDR 17.6
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Tee
 
ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0313130 (160 mm) SDR 9
0113131 (160 mm) SDR 11
8513130 (160 mm) SDR 17.6
0113134 (200 mm) SDR 7.4
0313134 (200 mm) SDR 9
0113135 (200 mm) SDR 11
8513134 (200 mm) SDR 17.6
0113138 (250 mm) SDR 7.4
0313138 (250 mm) SDR 9
0113139 (250 mm) SDR 11
8513138 (250 mm) SDR 17.6

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0213604 (160 mm x 125 mm x 160 mm) SDR 7.4
0823604 (160 mm x 125 mm x 160 mm) SDR 9
2623605 (160 mm x 125 mm x 160 mm) SDR 11
2523604 (160 mm x 125 mm x 160 mm) SDR 17.6
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0823618 (200 mm x 160 mm x 200 mm) SDR 9
2623619 (200 mm x 160 mm x 200 mm) SDR 11
2523618 (200 mm x 160 mm x 200 mm) SDR 17.6
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11
0823634 (250 mm x 160 mm x 250 mm) SDR 9
2623635 (250 mm x 160 mm x 250 mm) SDR 11
2523634 (250 mm x 160 mm x 250 mm) SDR 17.6
0823640 (250 mm x 200 mm x 250 mm) SDR 9
2623641 (250 mm x 200 mm x 250 mm) SDR 11
2523640 (250 mm x 200 mm x 250 mm) SDR 17.6

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Cross
 
ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® End Cap
 
ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings$ * +++ [G]
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
ASTM F2389
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings$ * +++ [G]
 
PP
 
Aquatherm greenpipe® Flange
 
ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
ASTM F2389
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)[G]

0115840 (Joint - PP - 25 mm)[G]

0115842 (Joint - PP - 32 mm)[G]

0115844 (Joint - PP - 40 mm)[G]

0115846 (Joint - PP - 50 mm)[G]

0115848 (Joint - PP - 63 mm)[G]

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Electrofusion
 
ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
ASTM F2389
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Insulation
 
ASTM F2389
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * +++ [G]
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * +++ [G]
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * +++ [G]
 
PP
 
Aquatherm greenpipe® Faser
 
ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Piece
 
ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Tee
 
ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Connecting Union
 
ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Counterpart for
 
ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Globe Valve
 
ASTM F2389
0140808 (20 mm)
0140810 (25 mm)
0140812 (32 mm)
0140814 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Concealed Valve
 
ASTM F2389
0140858 (Chrome Plated - 20 mm)
0140860 (Chrome Plated - 25 mm)
0140862 (Chrome Plated - 32 mm)
0140868 (Tamper-Proof - Short - 20 mm)
0140870 (Tamper-Proof - Short - 25 mm)
0140872 (Tamper-Proof - Short - 32 mm)
0140878 (Flexible Insta. Depth - 20 mm)
0140880 (Flexible Insta. Depth - 25 mm)
0140882 (Flexible Insta. Depth - 32 mm)
0140888 (Tamper-Proof - Long - 20 mm)
0140890 (Tamper-Proof - Long - 25 mm)
0140892 (Tamper-Proof - Long - 32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Pipe
 
CSA B137.11
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Pipe
 
CSA B137.11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Faser
 
CSA B137.11
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160mm) SDR 7.4
0670784 (UV - 200mm) SDR 7.4
0670788 (UV - 250mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Socket
 
CSA B137.11
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Reducer
 
CSA B137.11
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111176 (160/125 mm) SDR 7.4
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
CSA B137.11
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
CSA B137.11
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
CSA B137.11
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Tee
 
CSA B137.11
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
CSA B137.11
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Cross
 
CSA B137.11
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® End Cap
 
CSA B137.11
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
CSA B137.11
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
CSA B137.11
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Flange
 
CSA B137.11
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
CSA B137.11
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)
0115840 (Joint - PP - 25 mm)
0115842 (Joint - PP - 32 mm)
0115844 (Joint - PP - 40 mm)
0115846 (Joint - PP - 50 mm)
0115848 (Joint - PP - 63 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
CSA B137.11
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Electrofusion
 
CSA B137.11
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
CSA B137.11
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
CSA B137.11
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Insulation
 
CSA B137.11
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
CSA B137.11
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
CSA B137.11
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
CSA B137.11
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
CSA B137.11
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
CSA B137.11
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
CSA B137.11
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Tee
 
CSA B137.11
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
CSA B137.11
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Connecting Union
 
CSA B137.11
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
CSA B137.11
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Joint
 
CSA B137.11
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Counterpart for
 
CSA B137.11
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
CSA B137.11
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200 - 250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
CSA B137.11
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
CSA B137.11
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Back Plate Elbow
 
ASTM F2389
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Back Plate Elbow
 
CSA B137.11
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
ASTM F2389
920158 (20 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
CSA B137.11
920158 (20 mm x 1/2" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
ASTM F2389
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
CSA B137.11
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
ASTM F2389
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
CSA B137.11
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Piece
 
ASTM F2389
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Piece
 
CSA B137.11
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
ASTM F2389
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
CSA B137.11
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
ASTM F2389
1123018 (32 mm x 1" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
CSA B137.11
1123018 (32 mm x 1" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
ASTM F2389
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
CSA B137.11
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
ASTM F2389
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
CSA B137.11
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
ASTM F2389
1125016 (32 mm x 1" F x 32 mm SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
CSA B137.11
1125016 (32 mm x 1" F x 32 mm SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
ASTM F2389
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
CSA B137.11
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
ASTM F2389
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
CSA B137.11
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    





Reclaimed Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PP
 
Aquatherm Lilac Pipe
 
ASTM F2389
9010810 (25 mm) SDR 7.4
9010212 (32 mm) SDR 11
9010214 (40 mm) SDR 11
9010216 (50 mm) SDR 11
9010218 (63 mm) SDR 11
9010220 (75 mm) SDR 11
9010222 (90 mm) SDR 11
9010224 (110 mm) SDR 11
9010226 (125 mm) SDR 11
9010230 (160 mm) SDR 11
9010234 (200 mm) SDR 11
9010238 (250 mm) SDR 11

Pipe¢
 
PP
 
Aquatherm Lilac Pipe
 
CSA B137.11
9010208 (20 mm) SDR 11
9010210 (25 mm) SDR 11
9010212 (32 mm) SDR 11
9010214 (40 mm) SDR 11
9010216 (50 mm) SDR 11
9010218 (63 mm) SDR 11
9010220 (75 mm) SDR 11
9010222 (90 mm) SDR 11
9010224 (110 mm) SDR 11
9010226 (125 mm) SDR 11
9010230 (160 mm) SDR 11
9010234 (200 mm) SDR 11
9010238 (250 mm) SDR 11

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Industrial Applications

Product Type   Material Type   Trade Name   Product Standard

Pipe%
 
PP
 
Aquatherm Blue Pipe® Faser
 
ASTM F2389
2670708 (20 mm) SDR 7.4
2670710 (25 mm) SDR 7.4
2670112 (32 mm) SDR 11
2670114 (40 mm) SDR 11
2670116 (50 mm) SDR 11
2670118 (63 mm) SDR 11
2670120 (75 mm) SDR 11
2670122 (90 mm) SDR 11
2670124 (110 mm) SDR 11
2670126 (125 mm) SDR 11
2670130 (160 mm) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
2570130 (160 mm) SDR 17.6
2570134 (200 mm) SDR 17.6
2570138 (250 mm) SDR 17.6
2570142 (315 mm) SDR 17.6
2570144 (355 mm) SDR 17.6
2570146 (400 mm) SDR 17.6
2570148 (450 mm) SDR 17.6
2570150 (500 mm) SDR 17.6
2570152 (560 mm) SDR 17.6
2570154 (630 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe® Pipe
 
ASTM F2389
2610208 (20 mm) SDR 11
2610210 (25 mm) SDR 11
2610212 (32 mm) SDR 11
2610214 (40 mm) SDR 11
2610216 (50 mm) SDR 11
2610218 (63 mm) SDR 11
2610220 (75 mm) SDR 11
2610222 (90 mm) SDR 11
2610224 (110 mm) SDR 11
2610226 (125 mm) SDR 11
2610230 (160 mm) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe® MF RP
 
ASTM F2389
1970712 (32mm) SDR 9
1970714 (40mm) SDR 9
1970716 (50mm) SDR 9
1970718 (63mm) SDR 9
1970720 (75mm) SDR 9
1970722 (90mm) SDR 9
1970724 (110mm) SDR 9
1970726 (125mm) SDR 9
1970730 (160mm) SDR 9
1970734 (200mm) SDR 9
1970738 (250mm) SDR 9
1970742 (315mm) SDR 9
2670708 (20 mm) SDR 7.4
2670710 (25 mm) SDR 7.4
2670112 (32 mm) SDR 11
2670114 (40 mm) SDR 11
2670116 (50 mm) SDR 11
2670118 (63 mm) SDR 11
2670120 (75 mm) SDR 11
2670122 (90 mm) SDR 11
2670124 (110 mm) SDR 11
2670126 (125 mm) SDR 11
2670130 (160 mm) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
3570126 (125 mm) SDR 17.6
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
3570154 (630 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe®
 
CSA B137.11
2070148 (450 mm) SDR 11
2070146 (400 mm) SDR 11
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
3570154 (630 mm) SDR 17.6
2610208 (20 mm) SDR 11
2610210 (25 mm) Sch 11
2610212 (32 mm) Sch 11
2610214 (40 mm) Sch 11
2610216 (50 mm) SDR 11
2610218 (63 mm) SDR 11
2610220 (75 mm) SDR 11
2610222 (90 mm) SDR 11
2610224 (110 mm) SDR 11
2610226 (125 mm) SDR 11
2610230 (160 mm) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
3570126 (125 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe® MF RP
 
CSA B137.11
1970712 (32mm) SDR 9
1970714 (40mm) SDR 9
1970716 (50mm) SDR 9
1970718 (63mm) SDR 9
1970720 (75mm) SDR 9
1970722 (90mm) SDR 9
1970724 (110mm) SDR 9
1970726 (125mm) SDR 9
1970730 (160mm) SDR 9
1970734 (200mm) SDR 9
1970738 (250mm) SDR 9
1970742 (315mm) SDR 9
2610210 (25 mm) Sch 11
2610216 (50 mm) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610226 (125 mm) SDR 11 SDR 11
2610220 (75 mm) SDR 11
2610214 (40 mm) Sch 11
2610208 (20 mm) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610230 (160 mm) SDR 11
2610224 (110 mm) SDR 11
2610222 (90 mm) SDR 11
2610218 (63 mm) SDR 11
2610212 (32 mm) Sch 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
3570126 (125 mm) SDR 17.6
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
3570154 (630 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Fittings
 
PP
 
Aquatherm Blue Pipe®
 
ASTM F2389
2515430 (6") SDR 17.6
2515434 (8") SDR 17.6
2515438 (10") SDR 17.6
2515442 (12") SDR 17.6
2515444 (14") SDR 17.6
2515446 (16") SDR 17.6
2515448 (18") SDR 17.6
2515450 (20") SDR 17.6
2515454 (24") SDR 17.6

Fittings
 
PP
 
Aquatherm Blue 45º Wye
 
ASTM F2389
2113122 (3" - 90mm) SDR 11
2113124 (3 1/2" - 110mm) SDR 11
2113126 (4" - 125mm) SDR 11
2113131 (6" - 160mm) SDR 11
2113135 (8" - 200mm) SDR 11
2113139 (10" - 250mm) SDR 11
2113130 (6" - 160mm) SDR 17.6
2113134 (8" - 200mm) SDR 17.6
2113138 (10" - 250mm) SDR 17.6

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
ASTM F2389

Threaded Back plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
ASTM F2389
0620158 (1/2" - 20mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
ASTM F2389
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621110 (1/2" - 20mm) x 3/4" FIP   0621111 (3/4" - 25mm) x 1/2" FIP  
0621112 (3/4" - 25mm) x 3/4" FIP   0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP  
0621116 (1 1/4" - 40mm) x 1 1/4" FIP   0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP  
0621120 (2" - 63mm) x 2" FIP   0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP  
0621211 (3/4" - 25mm) x 1/2" MIP   0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP  
0621310 (1/2" - 20mm) x 3/4" MIP   0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP  
0621317 (1 1/4" - 40mm) x 1" MIP   0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP   0621320 (1.5" - 50mm) x 1.5" MIP  
0621321 (2" - 63mm) x 1.5" MIP   0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP  
0621325 (3" - 90mm) x 3" MIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
ASTM F2389
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
ASTM F2389
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
ASTM F2389
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
CSA B137.11

Threaded Back Plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
CSA B137.11
0620158 (1/2" - 20mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
CSA B137.11
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621111 (3/4" - 25mm) x 1/2" FIP   0621112 (3/4" - 25mm) x 3/4" FIP  
0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP   0621116 (1 1/4" - 40mm) x 1 1/4" FIP  
0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP   0621120 (2" - 63mm) x 2" FIP  
0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP   0621211 (3/4" - 25mm) x 1/2" MIP  
0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP   0621310 (1/2" - 20mm) x 3/4" MIP  
0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP   0621317 (1 1/4" - 40mm) x 1" MIP  
0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP   0621320 (1.5" - 50mm) x 1.5" MIP   0621321 (2" - 63mm) x 1.5" MIP  
0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP   0621325 (3" - 90mm) x 3" MIP  
0621110 (1/2" - 20mm) x 3/4" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
CSA B137.11
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
CSA B137.11
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
CSA B137.11
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Socket
 
ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducer
 
ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0311184 (200/160 mm)
0311188 (250/160 mm)
0311190 (250/200 mm)
0311192 (315/200 mm)
0311194 (315/250 mm)
0311196 (355/250 mm)
0311198 (355/315 mm)
0111174 (160/110 mm) SDR 7.4
0111176 (160/125 mm) SDR 7.4
0111184 (200/160 mm) SDR 7.4
0111190 (250/200 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111185 (200/160 mm) SDR 11
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)
0311174 (160/110 mm)
0311176 (160/125 mm)
0311182 (200/125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112534 (200 mm) SDR 7.4
0112538 (250 mm) SDR 7.4
7212530 (160 mm) SDR 9
7212534 (200 mm) SDR 9
7212538 (250 mm) SDR 9
7521542 (315 mm) SDR 9
7512544 (355 mm) SDR 9
0112531 (160 mm) SDR 11
0112535 (200 mm) SDR 11
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112712 (32 mm Internal/External)
0112710 (25 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0312130 (160 mm)
0312134 (200 mm)
0312138 (250 mm)
7212142 (315 mm)
7212144 (355 mm)
0112130 (160 mm) SDR 7.4
0112134 (200 mm) SDR 7.4
0112138 (250 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112135 (200 mm) SDR 11
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Tee
 
ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0813134 (200 mm)
0813138 (250 mm)
0813142 (315 mm)
0813144 (355 mm)
0113130 (160 mm) SDR 7.4
0113134 (200 mm) SDR 7.4
0113138 (250 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113135 (200 mm) SDR 11
0113139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0813600 (160 mm x 160 mm x 75mm)
0813602 (160 mm x 160 mm x 90mm)
0813608 (200 mm x 200 mm x 75mm)
0813610 (200 mm x 200 mm x 90mm)
0813612 (200 mm x 200 mm x 110mm)
0813614 (200 mm x 200 mm x 125mm)
0813618 (200 mm x 200 mm x 160mm)_
0813624 (250 mm x 250 mm x 75mm)
0813626 (250 mm x 250 mm x 90mm)
0813628 (250 mm x 250 mm x 110mm)
0813630 (250 mm x 250 mm x 125mm)
0813634 (250 mm x 250 mm x 160mm)
0813640 (250 mm x 250 mm x 200mm)
0813904 (315 mm x 315 mm x 125mm)
0813906 (315 mm x 315 mm x 160mm)
0813908 (315 mm x 315 mm x 200mm)
0813910 (315 mm x 315 mm x 250mm)
0813916 (355 mm x 355 mm x 125mm)
0813918 (355 mm x 355 mm x 160mm)
0813920 (355 mm x 355 mm x 200mm)
0813922 (355 mm x 355 mm x 250mm)
0813924 (355 mm x 355 mm x 315mm)
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cross
 
ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® End Cap
 
ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11
0314130 (160 mm)
0314134 (200 mm)
0314138 (250 mm)
0314142 (315 mm)
0314144 (355 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)
0315265 (315 mm x 160mm)
0315271 (355 mm x 160mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings$ * +++
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
ASTM F2389
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11
0315530 (160 mm) SDR 9
0315534 (200 mm) SDR 9
0315538 (250 mm) SDR 9
0315542 (315 mm) SDR 9
0315544 (355 mm) SDR 9

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings$ * +++
 
PP
 
Aquatherm greenpipe® Flange
 
ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
ASTM F2389
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)
0115840 (Joint - PP - 25 mm)
0115842 (Joint - PP - 32 mm)
0115844 (Joint - PP - 40 mm)
0115846 (Joint - PP - 50 mm)
0115848 (Joint - PP - 63 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Electrofusion
 
ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
ASTM F2389
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Insulation
 
ASTM F2389
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610308 (20 mm - Coil: 100 m) SDR 11
0610310 (25 mm - Coil: 100 m) SDR 11
0610312 (32 mm - Coil: 100 m) SDR 11
06100208 (20 mm) SDR 11
0610210 (25 mm) SDR 11
0610212 (32 mm) SDR 11
0610214 (40 mm) SDR 11
0610216 (50 mm) SDR 11
0610218 (63 mm) SDR 11
0610220 (75 mm) SDR 11
0610222 (90 mm) SDR 11
0610224 (110 mm) SDR 11
0610226 (125 mm) SDR 11
0610230 (160 mm) SDR 11
0610234 (200 mm) SDR 11
0610238 (250 mm) SDR 11
10242 (315 mm) SDR 11
10244 (355 mm) SDR 11
10246 (400 mm) SDR 11
10248 (450 mm) SDR 11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe® Faser
 
ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Piece
 
ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Tee
 
ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Connecting Union
 
ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Counterpart for
 
ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Globe Valve
 
ASTM F2389
0140808 (20 mm)
0140810 (25 mm)
0140812 (32 mm)
0140814 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Concealed Valve
 
ASTM F2389
0140858 (Chrome Plated - 20 mm)
0140860 (Chrome Plated - 25 mm)
0140862 (Chrome Plated - 32 mm)
0140868 (Tamper-Proof - Short - 20 mm)
0140870 (Tamper-Proof - Short - 25 mm)
0140872 (Tamper-Proof - Short - 32 mm)
0140878 (Flexible Insta. Depth - 20 mm)
0140880 (Flexible Insta. Depth - 25 mm)
0140882 (Flexible Insta. Depth - 32 mm)
0140888 (Tamper-Proof - Long - 20 mm)
0140890 (Tamper-Proof - Long - 25 mm)
0140892 (Tamper-Proof - Long - 32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * ¢ +++
 
PP
 
Aquatherm greenpipe® Pipe
 
CSA B137.11
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * ¢ +++
 
PP
 
Aquatherm greenpipe® Pipe
 
CSA B137.11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * ¢ +++
 
PP
 
Aquatherm greenpipe® Faser
 
CSA B137.11
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160mm) SDR 7.4
0670784 (UV - 200mm) SDR 7.4
0670788 (UV - 250mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Socket
 
CSA B137.11
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Reducer
 
CSA B137.11
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111176 (160/125 mm) SDR 7.4
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11
0311184 (200/160 mm)
0311188 (250/160 mm)
0311190 (250/200 mm)
0311192 (315/200 mm)
0311194 (315/250 mm)
0311196 (355/250 mm)
0311198 (355/315 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
CSA B137.11
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)
0311174 (160/110 mm)
0311176 (160/125 mm)
0311182 (200/125 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
CSA B137.11
7212530 (160 mm) SDR 9
7212534 (200 mm) SDR 9
7212538 (250 mm) SDR 9
7521542 (315 mm) SDR 9
7512544 (355 mm) SDR 9
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
CSA B137.11
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0312130 (160 mm)
0312134 (200 mm)
0312138 (250 mm)
7212142 (315 mm)
7212144 (355 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Tee
 
CSA B137.11
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11
0813134 (200 mm)
0813138 (250 mm)
0813142 (315 mm)
0813144 (355 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
CSA B137.11
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11
0813600 (160 mm x 160 mm x 75mm)
0813602 (160 mm x 160 mm x 90mm)
0813608 (200 mm x 200 mm x 75mm)
0813610 (200 mm x 200 mm x 90mm)
0813612 (200 mm x 200 mm x 110mm)
0813614 (200 mm x 200 mm x 125mm)
0813618 (200 mm x 200 mm x 160mm)
0813624 (250 mm x 250 mm x 75mm)
0813626 (250 mm x 250 mm x 90mm)
0813628 (250 mm x 250 mm x 110mm)
0813630 (250 mm x 250 mm x 125mm)
0813634 (250 mm x 250 mm x 160mm)
0813640 (250 mm x 250 mm x 200mm)
0813904 (315 mm x 315 mm x 125mm)
0813906 (315 mm x 315 mm x 160mm)
0813908 (315 mm x 315 mm x 200mm)
0813910 (315 mm x 315 mm x 250mm)
0813916 (355 mm x 355 mm x 125mm)
0813918 (355 mm x 355 mm x 160mm)
0813920 (355 mm x 355 mm x 200mm)
0813922 (355 mm x 355 mm x 250mm)
0813924 (355 mm x 355 mm x 315mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Cross
 
CSA B137.11
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® End Cap
 
CSA B137.11
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11
0314130 (160 mm)
0314134 (200 mm)
0314138 (250 mm)
0314142 (315 mm)
0314144 (355 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
CSA B137.11
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)
0315265 (315 mm x 160mm)
0315271 (355 mm x 160mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
CSA B137.11
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11
0315530 (160 mm) SDR 9
0315534 (200 mm) SDR 9
0315538 (250 mm) SDR 9
0315542 (315 mm) SDR 9
0315544 (355 mm) SDR 9

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Flange
 
CSA B137.11
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
CSA B137.11
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)
0115840 (Joint - PP - 25 mm)
0115842 (Joint - PP - 32 mm)
0115844 (Joint - PP - 40 mm)
0115846 (Joint - PP - 50 mm)
0115848 (Joint - PP - 63 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
CSA B137.11
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Electrofusion
 
CSA B137.11
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
CSA B137.11
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
CSA B137.11
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Insulation
 
CSA B137.11
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
CSA B137.11
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
CSA B137.11
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Adapter
 
CSA B137.11
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
CSA B137.11
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
CSA B137.11
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
CSA B137.11
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Transition Tee
 
CSA B137.11
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Adapter
 
CSA B137.11
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Connecting Union
 
CSA B137.11
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
CSA B137.11
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Transition Joint
 
CSA B137.11
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Counterpart for
 
CSA B137.11
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
CSA B137.11
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200 - 250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
CSA B137.11
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
CSA B137.11
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Back Plate Elbow
 
ASTM F2389
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Back Plate Elbow
 
CSA B137.11
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
ASTM F2389
920158 (20 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
CSA B137.11
920158 (20 mm x 1/2" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
ASTM F2389
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
CSA B137.11
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
ASTM F2389
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
CSA B137.11
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Transition Piece
 
ASTM F2389
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Transition Piece
 
CSA B137.11
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
ASTM F2389
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
CSA B137.11
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
ASTM F2389
1123018 (32 mm x 1" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
CSA B137.11
1123018 (32 mm x 1" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
ASTM F2389
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
CSA B137.11
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
ASTM F2389
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
CSA B137.11
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
ASTM F2389
1125016 (32 mm x 1" F x 32 mm SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
CSA B137.11
1125016 (32 mm x 1" F x 32 mm SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
ASTM F2389
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
CSA B137.11
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Fittings+++
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
ASTM F2389
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
CSA B137.11
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Potable Water - Materials

Material Type End Use Trade Name Product Standard
PP 1, 2 Fusiolen® 210B44009 ASTM D4101


Radiant Floor Heating

Product Type   Material Type   Trade Name   Product Standard

Panel* ¢
 
PP
 
Aquatherm Black
 
CSA B137.11
0.12 sq. m - 5.0 sq. m

* Certified for use at 180ºF and 45 psi.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Number of matching Manufacturers is 1
Number of matching Products is 3187
Processing time was 2 seconds