NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, September 22, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=03850&Standard=358&


NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems



 
Aquatherm GmbH 
Biggen 5
D-57439 Attendorn 
Germany 
49 272 29500
Visit this company's website

Facility : Attendorn, Germany

NSF/ANSI 358-2 Polypropylene Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe%
 
PP
 
Aquatherm Blue Pipe® Faser
 
ASTM F2389
2670708 (20 mm) SDR 7.4
2670710 (25 mm) SDR 7.4
2670112 (32 mm) SDR 11
2670114 (40 mm) SDR 11
2670116 (50 mm) SDR 11
2670118 (63 mm) SDR 11
2670120 (75 mm) SDR 11
2670122 (90 mm) SDR 11
2670124 (110 mm) SDR 11
2670126 (125 mm) SDR 11
2670130 (160 mm) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
2570130 (160 mm) SDR 17.6
2570134 (200 mm) SDR 17.6
2570138 (250 mm) SDR 17.6
2570142 (315 mm) SDR 17.6
2570144 (355 mm) SDR 17.6
2570146 (400 mm) SDR 17.6
2570148 (450 mm) SDR 17.6
2570150 (500 mm) SDR 17.6
2570152 (560 mm) SDR 17.6
2570154 (630 mm) SDR 17.6

% Product may also carry the designations Climatherm®, Climatherm® Faser, and Climatherm®
  OT Faser.

Pipe%
 
PP
 
Aquatherm Blue Pipe® Pipe
 
ASTM F2389
2610208 (20 mm) SDR 11
2610210 (25 mm) SDR 11
2610212 (32 mm) SDR 11
2610214 (40 mm) SDR 11
2610216 (50 mm) SDR 11
2610218 (63 mm) SDR 11
2610220 (75 mm) SDR 11
2610222 (90 mm) SDR 11
2610224 (110 mm) SDR 11
2610226 (125 mm) SDR 11
2610230 (160 mm) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11

% Product may also carry the designations Climatherm®, Climatherm® Faser, and Climatherm®
  OT Faser.

Pipe%
 
PP
 
Aquatherm Blue Pipe® MF RP
 
ASTM F2389
2670708 (20 mm) SDR 7.4
2670710 (25 mm) SDR 7.4
2670112 (32 mm) SDR 11
2670114 (40 mm) SDR 11
2670116 (50 mm) SDR 11
2670118 (63 mm) SDR 11
2670120 (75 mm) SDR 11
2670122 (90 mm) SDR 11
2670124 (110 mm) SDR 11
2670126 (125 mm) SDR 11
2670130 (160 mm) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
3570126 (125 mm) SDR 17.6
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
3570154 (630 mm) SDR 17.6

% Product may also carry the designations Climatherm®, Climatherm® Faser, and Climatherm®
  OT Faser.

Fittings
 
PP
 
Aquatherm Blue Pipe®
 
ASTM F2389
2515430 (6") SDR 17.6
2515434 (8") SDR 17.6
2515438 (10") SDR 17.6
2515442 (12") SDR 17.6
2515444 (14") SDR 17.6
2515446 (16") SDR 17.6
2515448 (18") SDR 17.6
2515450 (20") SDR 17.6
2515454 (24") SDR 17.6

Fittings
 
PP
 
Aquatherm Blue 45º Wye
 
ASTM F2389
2113122 (3" - 90mm) SDR 11
2113124 (3 1/2" - 110mm) SDR 11
2113126 (4" - 125mm) SDR 11
2113131 (6" - 160mm) SDR 11
2113135 (8" - 200mm) SDR 11
2113139 (10" - 250mm) SDR 11
2113130 (6" - 160mm) SDR 17.6
2113134 (8" - 200mm) SDR 17.6
2113138 (10" - 250mm) SDR 17.6

Fittings* +++
 
PP
 
Aquatherm greenpipe® Socket
 
ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducer
 
ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111176 (160/125 mm) SDR 7.4
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Tee
 
ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cross
 
ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® End Cap
 
ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings$ * +++
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
ASTM F2389
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings$ * +++
 
PP
 
Aquatherm greenpipe® Flange
 
ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
ASTM F2389
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)
0115840 (Joint - PP - 25 mm)
0115842 (Joint - PP - 32 mm)
0115844 (Joint - PP - 40 mm)
0115846 (Joint - PP - 50 mm)
0115848 (Joint - PP - 63 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Electrofusion
 
ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
ASTM F2389
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Insulation
 
ASTM F2389
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
06100208 (20 mm) SDR 11
0610210 (25 mm) SDR 11
0610212 (32 mm) SDR 11
0610214 (40 mm) SDR 11
0610216 (50 mm) SDR 11
0610218 (63 mm) SDR 11
0610220 (75 mm) SDR 11
0610222 (90 mm) SDR 11
0610224 (110 mm) SDR 11
0610226 (125 mm) SDR 11
0610230 (160 mm) SDR 11
0610234 (200 mm) SDR 11
0610238 (250 mm) SDR 11
10242 (315 mm) SDR 11
10244 (355 mm) SDR 11
10246 (400 mm) SDR 11
10248 (450 mm) SDR 11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4
0610308 (20 mm - Coil: 100 m) SDR 11
0610310 (25 mm - Coil: 100 m) SDR 11
0610312 (32 mm - Coil: 100 m) SDR 11

& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe® Faser
 
ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Piece
 
ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Tee
 
ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Connecting Union
 
ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Counterpart for
 
ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Globe Valve
 
ASTM F2389
0140808 (20 mm)
0140810 (25 mm)
0140812 (32 mm)
0140814 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Concealed Valve
 
ASTM F2389
0140858 (Chrome Plated - 20 mm)
0140860 (Chrome Plated - 25 mm)
0140862 (Chrome Plated - 32 mm)
0140868 (Tamper-Proof - Short - 20 mm)
0140870 (Tamper-Proof - Short - 25 mm)
0140872 (Tamper-Proof - Short - 32 mm)
0140878 (Flexible Insta. Depth - 20 mm)
0140880 (Flexible Insta. Depth - 25 mm)
0140882 (Flexible Insta. Depth - 32 mm)
0140888 (Tamper-Proof - Long - 20 mm)
0140890 (Tamper-Proof - Long - 25 mm)
0140892 (Tamper-Proof - Long - 32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Back Plate Elbow
 
ASTM F2389
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
ASTM F2389
920158 (20 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
ASTM F2389
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
ASTM F2389
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Transition Piece
 
ASTM F2389
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
ASTM F2389
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
ASTM F2389
1123018 (32 mm x 1" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
ASTM F2389
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
ASTM F2389
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
ASTM F2389
1125016 (32 mm x 1" F x 32 mm SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
ASTM F2389
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
ASTM F2389
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


Number of matching Manufacturers is 1
Number of matching Products is 719
Processing time was 0 seconds