NSF Product and Service Listings
These NSF Official Listings are current as of Monday, September 23, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=12670&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Boshart Industries Inc. | |
25 Whaley Avenue | |
P.O. Box 310 | |
Milverton, ON N0K 1M0 | |
Canada | |
519-595-4444 | |
Visit this company's website |
Facility : Milverton, Ontario, Canada
Potable Water - Pipe and Fittings
Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings+ [G] |
NP |
SWP |
ASTM D2609 |
||||
90° Elbow, Insert x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
90° Male Elbow, MIP x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | |||||||
Adapters, MIP x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
Couplings, Insert x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
Tee, Insert x Insert x Insert |
|||||||
1/2" x 1/2" x 1/2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | 1 1/4" x 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" x 1 1/2" | 2" x 2" x 2" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings+ [G] |
PVC |
SWP |
ASTM D2609 |
||||
90° Elbow, Insert x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
90° Female Elbow, FPT x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 3/4" | ||||
1 1/4" x 1 1/4" | 1 1/2" x 1 1/2" | ||||||
90° Male Elbow, MIP x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
90° Reducer Elbow, Insert x Insert |
|||||||
3/4" x 1/2" | 1" x 3/4" | 1 1/4" x 1" | |||||
90° Reducer Female Elbow, FPT x Insert |
|||||||
3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | 1" x 1 1/4" | ||||
1 1/4" x 3/4" | |||||||
Adapters, MIP x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | 3" x 3" | |||||
Couplings, Insert x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | 3" x 3" | |||||
Elbow, FPT x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | ||||||
Female Adapters, FPT x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
Female Tee, Insert x Insert x FPT |
|||||||
1/2" x 1/2" x 1/2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | 1 1/4" x 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" x 1 1/2" | |||||||
Increasing Adapter, MIP x Insert |
|||||||
1/2" x 3/4" | 3/4" x 1" | 1" x 1 1/4" | 1" x 1 1/2" | ||||
1 1/4" x 1 1/2" | 1 1/2" x 2" | ||||||
Male Tee, Insert x Insert x MIP |
|||||||
1/2" x 1/2" x 1/2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | 1 1/4" x 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" x 1 1/2" | |||||||
Plug, Insert |
|||||||
1/2" | 3/4" | 1" | 1 1/4" | ||||
1 1/2" | 2" | ||||||
Reducer Adapter, MIP x Insert |
|||||||
3/4" x 1/2" | 1" x 3/4" | 1 1/4" x 3/4" | 1 1/4" x 1" | ||||
1 1/2" x 1" | 1 1/2" x 1 1/4" | 2" x 1 1/2" | |||||
Reducer Coupling, Insert x Insert |
|||||||
3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | 1 1/4" x 3/4" | ||||
1 1/4" x 1" | 1 1/2" x 3/4" | 1 1/2" x 1" | 1 1/2" x 1 1/4" | ||||
2" x 1" | 2" x 1 1/4" | 2" x 1 1/2" | |||||
Reducer Elbow, FPT x Insert |
|||||||
3/4" x 1/2" | 1" x 1/2" | ||||||
Reducer Female Tee, Insert x Insert x FPT |
|||||||
3/4" x 3/4" x 1/2" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | 1 1/4" x 1 1/4" x 1/2" | ||||
1 1/4" x 1 1/4" x 3/4" | 1 1/4" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 3/4" | 2" x 2" x 3/4" | ||||
2" x 2" x 1" | |||||||
Reducer Tee, Insert x Insert x Insert |
|||||||
1/2" x 1/2" x 3/4" | 3/4" x 1/2" x 1/2" | 3/4" x 3/4" x 1/2" | 3/4" x 3/4" x 1" | ||||
1" x 1" x 1/2" | 1" x 1" x 3/4" | 1 1/4" x 1 1/4" x 1/2" | 1 1/4" x 1 1/4" x 3/4" | ||||
1 1/4" x 1 1/4" x 1" | 1 1/2" x 1 1/2" x 1/2" | 1 1/2" x 1 1/2" x 3/4" | 1 1/2" x 1 1/2" x 1" | ||||
1 1/2" x 1 1/2" x 1 1/4" | 2" x 2" x 1/2" | 2" x 2" x 3/4" | |||||
Tee, Insert x Insert x Insert |
|||||||
1/2" x 1/2" x 1/2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | 1 1/4" x 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" x 1 1/2" | 2" x 2" x 2" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
|||||||
Fittings+ [G] |
PP |
SWP |
ASTM D2609 |
||||
90° Elbows, Insert x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
90° Male Elbows, MIP x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/2" x 1 1/2" | ||||
90° Reducer Elbows, Insert x Insert |
|||||||
3/4" x 1/2" | |||||||
Adapters, MIP x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
Couplings, Insert x Insert |
|||||||
1/2" x 1/2" | 3/4" x 3/4" | 1" x 1" | 1 1/4" x 1/14" | ||||
1 1/2" x 1 1/2" | 2" x 2" | ||||||
Increasing Adapter, MIP x Insert |
|||||||
1/2" x 3/4" | 3/4" x 1" | ||||||
Male Tee, Insert x Insert x MPT |
|||||||
1/2" x 1/2" x 1/2" | |||||||
Plug, Insert |
|||||||
1/2" | 3/4" | 1" | |||||
Reducer Adapter, MIP x Insert |
|||||||
3/4" x 1/2" | 1" x 3/4" | 1 1/4" x 1" | 1 1/2" x 1 1/4" | ||||
Reducer Coupling, Insert x Insert |
|||||||
3/4" x 1/2" | 1" x 1/2" | 1" x 3/4" | 1 1/4" x 1" | ||||
1 1/2" x 1 1/4" | |||||||
Reducer Tee, Insert x Insert x Insert |
|||||||
3/4" x 3/4" x 1/2" | 1" x 1" x 1/2" | 1" x 1" x 3/4" | |||||
Tee, Insert x Insert x Insert |
|||||||
1/2" x 1/2" x 1 /2" | 3/4" x 3/4" x 3/4" | 1" x 1" x 1" | 1 1/4" x 1 1/4" x 1 1/4" | ||||
1 1/2" x 1 1/2" x 1 1/2" | 2" x 2" x 2" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
Number of matching Manufacturers is 1
Number of matching Products is 196
Processing time was 1 seconds