NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, November 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=22720&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
S & B Technical Products, Inc. / Terramix S.A. 
1300 East Berry Street
Ft. Worth, TX 76119 
United States 
800-432-8213 
817-923-3344

Facility : Fort Worth, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 Rieber		  
ASTM F477
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
ASTM F477
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
ASTM F477
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Fastite Gasket		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Flange Tyte		  
ASTM F477
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
ASTM F477
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
ASTM F477
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
ASTM F477
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 TURNER C909		  
ASTM F477
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
ASTM F477
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
ASTM F477
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 MJ Field Lok		  
ASTM F477
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Metric Tyton		  
ASTM F477
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
ASTM F477
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Rieber IPS		  
ASTM F477
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Tyton		  
ASTM F477
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Tyton CM		  
ASTM F477
3" - 42" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Sure Stop Gasket		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 FIELD LOK 350		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 RCT Flex Tite C900		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 RCT Flex Tite IPS Transition		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
ASTM F477
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
ASTM F477
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket		  
ASTM F477
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Fastite Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Sewer Ret/ Ring		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 VF Sewer		  
ASTM F477
4" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Full Face Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket		  
ASTM F477
1 1/2" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket		  
ASTM F477
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 MJ Field Lok Gasket		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Push-On Gasket		  
ASTM F477
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Push-On Metric Gasket		  
ASTM F477
800 mm - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Rieber CIOD Gasket		  
ASTM F477
4" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Rieber IPS Gasket		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket		  
ASTM F477
50 mm - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Platinum Gkt		  
ASTM F477
50 mm - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [2] [G]		  
SBR		  
SBR HT627 Tyton Gasket		  
ASTM F477
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
SBR		  
SBR HT627 Turner C909		  
ASTM F477
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
SBR		  
SBR HT627 FIELD LOK 350		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1]		  
SBR		  
SBR HT727 FASTITE		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 PUSH ON		  
ASTM F477
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 RIEBER CIOD		  
ASTM F477
4" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 PRR SEWER		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 RIEBER IPS		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 TYTON		  
ASTM F477
3" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 TURNER C909		  
ASTM F477
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 FIELD LOK 350		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX IPS		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX C909		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 Rieber		  
ASTM F477
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
ASTM F477
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
ASTM F477
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
ASTM F477
1.5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
ASTM F477
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Metric Tyton		  
ASTM F477
80 - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 T Saddle IP		  
ASTM F477
4" - 6" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Rieber IPS		  
ASTM F477
1.5" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Sure Stop Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Tyton Gasket		  
ASTM F477
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Tyton CM		  
ASTM F477
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
CSA B137.3
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 TURNER C909		  
CSA B137.3
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX IPS		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX C909		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 FIELD LOK 350		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 C900 Rieber		  
CSA B137.3
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
CSA B137.3
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
CSA B137.3
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Flange Tyte		  
CSA B137.3
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
CSA B137.3
1.5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
CSA B137.3
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Metric Tyton		  
CSA B137.3
80 - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 T Saddle IP		  
CSA B137.3
4" - 6" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Sure Stop Gasket		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Rieber IPS		  
CSA B137.3
1.5" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Tyton Gasket		  
CSA B137.3
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 Tyton CM		  
CSA B137.3
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 C900 Rieber		  
CSA B137.3
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
CSA B137.3
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
CSA B137.3
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Fastite Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Flange Tyte		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
CSA B137.3
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
CSA B137.3
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 MJ Field Lok		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Metric Tyton		  
CSA B137.3
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Rieber IPS		  
CSA B137.3
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Tyton		  
CSA B137.3
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Tyton CM		  
CSA B137.3
3" - 42" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 FIELD LOK 350		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Sure Stop Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
CSA B137.3
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
CSA B137.3
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [3] [4] [G]		  
NBR		  
NBR HT4537 TURNER C909		  
CSA B137.3
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Fastite Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Full Face Flange Tyte		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Push-On Gasket 		 
CSA B137.3
3" - 42" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Push-On Metric Gasket 		 
CSA B137.3
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber CIOD Gasket 		 
CSA B137.3
4" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber IPS Gasket 		 
CSA B137.3
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket 		 
CSA B137.3
50 mm - 630 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber Metric Platinum Pressure		  
CSA B137.3
50 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Tyton Gasket		  
CSA B137.3
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
CSA B137.3
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
CSA B137.3
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket 		 
CSA B137.3
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Flange Tyte Gasket		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket 		 
CSA B137.3
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket		  
CSA B137.3
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 MJ Field Lok Gasket 		 
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 RCT Flex Tite C900		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 RCT Flex Tite IPS Transition		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 FIELD LOK 350		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Sewer Ret/Ring 		 
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Turner C909		  
CSA B137.3
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 VF Sewer		  
CSA B137.3
4" - 8" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [3] [G]		  
EPDM		  
EPDM HT553 FIELD LOK 350		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 TURNER C909		  
CSA B137.3.1
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX IPS		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX C909		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 Rieber		  
CSA B137.3.1
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
CSA B137.3.1
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
CSA B137.3.1
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
CSA B137.3.1
1.5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
CSA B137.3.1
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 T Saddle IP		  
CSA B137.3.1
4" - 6" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Metric Tyton		  
CSA B137.3.1
80 - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Rieber IPS		  
CSA B137.3.1
1.5" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Sure Stop Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Tyton Gasket		  
CSA B137.3.1
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Tyton CM		  
CSA B137.3.1
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 C900 Rieber		  
CSA B137.3.1
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
CSA B137.3.1
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
CSA B137.3.1
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Fastite Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
CSA B137.3.1
1 1/5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
CSA B137.3.1
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 MJ Field Lok		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Metric Tyton		  
CSA B137.3.1
80 mm - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Rieber IPS		  
CSA B137.3.1
1 1/2" - 24 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Tyton		  
CSA B137.3.1
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Tyton CM		  
CSA B137.3.1
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 FIELD LOK 350		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 Sure Stop Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [3] [4] [G]		  
NBR		  
NBR HT4537 TURNER C909		  
CSA B137.3.1
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Fastite Gasket		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Full Face Flange Tyte 		 
CSA B137.3.1
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Push-On Gasket		  
CSA B137.3.1
3" - 42" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Push-On Metric Gasket		  
CSA B137.3.1
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber CIOD Gasket		  
CSA B137.3.1
4" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber IPS Gasket		  
CSA B137.3.1
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket		  
CSA B137.3.1
50 mm - 630 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rieber Metric Platinum Pressure		  
CSA B137.3.1
50 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Tyton Gasket		  
CSA B137.3.1
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
CSA B137.3.1
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
CSA B137.3.1
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket 		 
CSA B137.3.1
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Flange Tyte Gasket		  
CSA B137.3.1
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket 		 
CSA B137.3.1
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket		  
CSA B137.3.1
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 MJ Field Lok Gasket		  
CSA B137.3.1
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 RCT Flex Tite C900		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
RCT Flex Tite IPS Transition		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 FIELD LOK 350		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Sewer Ret/Ring		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 Turner C909		  
CSA B137.3.1
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [2] [3] [4] [G]		  
SBR		  
SBR HT627 VF Sewer		  
CSA B137.3.1
4" - 8" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in
    "size".
[3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


Sewer Main - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Gaskets¢ [1]		  
SBR		  
SBR HT627 RCT Flex Tite IPS Transition 		  
CSA B182.2
4" -12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 RCT Flex Tite C900		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Sewer Ret/Ring 		  
CSA B182.2
4" -12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 FIELD LOK 350		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Turner C909 		  
CSA B182.2
4" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 VF Sewer 		  
CSA B182.2
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Fastite Gasket 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Full Face Flange Tyte 		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Push-On Gasket 		  
CSA B182.2
3" - 42" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Push-On Metric Gasket 		  
CSA B182.2
80mm - 1200mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber CIOD Gasket 		  
CSA B182.2
4" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber IPS Gasket 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket 		  
CSA B182.2
50mm - 630mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber Metric Pressure Platinum Gkt		  
CSA B182.2
50mm - 1200mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Tyton Gasket 		  
CSA B182.2
3" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C900 Rieber Gasket 		  
CSA B182.2
2" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket 		  
CSA B182.2
2" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket 		  
CSA B182.2
14" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Flange Tyte Gasket 		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket 		  
CSA B182.2
1.5" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket 		  
CSA B182.2
14" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 MJ Field Lok Gasket 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rest MJ (PVC) 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PRR SEWER		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 FASTITE 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PUSH ON 		  
CSA B182.2
3" - 42" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 RIEBER CIOD 		  
CSA B182.2
4" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 RIEBER IPS 		  
CSA B182.2
1 / 12" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 TYTON 		  
CSA B182.2
3" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 TURNER C909		  
CSA B182.2
4" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 Rieber		  
CSA B182.2
2" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
CSA B182.2
2" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
CSA B182.2
14" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Fastite Gasket		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Flange Tyte		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
CSA B182.2
1.5" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
CSA B182.2
14" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 MJ Field Lok		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Metric Tyton		  
CSA B182.2
80 mm - 1200 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Rieber IPS		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Tyton		  
CSA B182.2
3" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Tyton CM		  
CSA B182.2
3" - 42" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Sure Stop Gasket		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 FIELD LOK 350		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.


Facility : Santa Ana, Costa Rica (Hultec)

Drain, Waste, and Vent - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Gaskets¢ [1]		  
TPE		  
TPV HTP55 PT-FIX Sewer		  
ASTM F477
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 PT-FIX DWV		  
ASTM F477
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 gaskets		  
ASTM F477
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 PT-FIX Sewer		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 PT-FIX DWV		  
CSA B182.2
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 gaskets		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55		  
ASTM F477
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
HTP55 PT-Fix		  
ASTM F477
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55		  
CSA B182.2
4"- 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
HTP55 PT-Fix		  
CSA B182.2
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.


Fire Main - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Rieberlok Gasket 		 
UL 1285
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C900 1 Piece RR		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C900 CIOD DD		  
UL 1285
4" - 18"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C900 Platinum Pressure		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C900 Rieber		  
UL 1285
2" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
UL 1285
2" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C905 1 Piece RR		  
UL 1285
14" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C905 Platinum Pressure		  
UL 1285
14" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
UL 1285
14" - 48"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 C909 Biax Mambo		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Fast Grip		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Field LOK		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 FIELD LOK 350®		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Flange Tyte		  
UL 1285
4" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
UL 1285
4" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
UL 1285
1 1/2" - 18"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
UL 1285
14" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 IPS Biax Mambo		  
UL 1285
3" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 IPS Hero		  
UL 1285
1 1/2" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 LOKX System DIPS		  
UL 1285
4"-12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 LOKX System IPS		  
UL 1285
4"-12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Metric Pressure		  
UL 1285
50 mm - 630 mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Metric Tyton		  
UL 1285
80 mm - 1200 mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 One Piece Retainer Ring CIOD		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 PIP DD		  
UL 1285
10" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 PR IPS		  
UL 1285
6" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Rieber IPS		  
UL 1285
1 1/2" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 S-Ring		  
UL 1285
6" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Sure Stop		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 T Saddle IP		  
UL 1285
4" - 6"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 TURNER BIAX C909		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 TURNER BIAX IPS		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 TURNER C909		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Turner Lock		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Tyton CM		  
UL 1285
3" - 42"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 TYTON GASKET		  
UL 1285
3" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 USIFLEX		  
UL 1285
30" - 54"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C900 1 Piece RR		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C900 CIOD DD		  
UL 1285
4" - 18"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C900 Platinum Pressure		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C900 Rieber		  
UL 1285
2" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
UL 1285
2" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C905 1 Piece RR		  
UL 1285
14" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C905 B/C Ring Certalok		  
UL 1285
>= 4"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C905 Platinum Pressure		  
UL 1285
14" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
UL 1285
14" - 48"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 C909 Biax Mambo		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Fast Grip		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Fastite Gasket		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Field LOK		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 FIELD LOK 350®		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Flange Tyte		  
UL 1285
4" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Fluid Tite		  
UL 1285
>= 4"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
UL 1285
4" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
UL 1285
1 1/2" - 18"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
UL 1285
14" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 IPS Biax Mambo		  
UL 1285
3" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 IPS Hero		  
UL 1285
1 1/2" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Metric Pressure		  
UL 1285
50 mm - 630 mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Metric Tyton		  
UL 1285
80 mm - 1200 mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 MJ Field Lok		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 One Piece Retainer Ring CIOD		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 PIP DD		  
UL 1285
10" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 PR IPS		  
UL 1285
6" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Rieber IPS		  
UL 1285
1 1/2" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 S-Ring		  
UL 1285
6" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Sure Stop		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 TURNER C909		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Tyton		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Tyton CM		  
UL 1285
3"- 42"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT4537 Yellowmine		  
UL 1285
>= 4"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT553 LOKX System DIPS		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
NBR		  
NBR HT553 LOKX System IPS		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Rieberlok Gasket		  
UL 1285
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 RCT Flex Tite C900		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 RCT Flex Tite IPS Transition		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 A/T IPS Gasket		  
UL 1285
1.5" - 4"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 C900 CIOD DD SBR Gasket		  
UL 1285
4" - 18"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
UL 1285
2" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
UL 1285
2" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket		  
UL 1285
14" - 48"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 C909 Biax Mambo Gasket		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 CIOD Hero		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 CIOD RIEBER HR		  
UL 1285
14"   16"   18"   20"  
30"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Fast Grip		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Fastite Gasket		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 FIELD LOK 350®		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Field LOK SBR Gasket		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 LOKX System DIPS		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 LOKX System IPS		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Flange Tyte Gasket		  
UL 1285
4" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Flo Control IPS Gasket		  
UL 1285
2.5" - 8"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Full Face Flange Tyte		  
UL 1285
4" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket		  
UL 1285
1.5" - 18"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket		  
UL 1285
14" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 IPS Biax Mambo Gasket		  
UL 1285
3" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 IPS Hero		  
UL 1285
1.5" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Lock Push On Gasket		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 MJ Field Lok Gasket		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 One-Piece Retainer Ring CIOD Gasket		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 PIP DD SBR Gasket		  
UL 1285
10" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Plastic Retainer Ring IPS Gasket		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Platinum Press SBR Ozone | Gasket		  
UL 1285
63mm - 225mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Push-On Gasket		  
UL 1285
3" - 42"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Push-On Metric Gasket		  
UL 1285
80mm - 1200mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 RCT		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Rieber CIOD Gasket		  
UL 1285
4" - 48"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Rieber IPS Gasket		  
UL 1285
1.5" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket		  
UL 1285
50mm - 630mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Rieber Metric Pressure Platinum Gkt		  
UL 1285
50mm - 1200mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 S-Ring		  
UL 1285
6" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Self Lock Push-On Gasket		  
UL 1285
3" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Sewer Ret/ Ring		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Super Bell Tite Gasket		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
UL 1285
4" - 36"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 THAI Gasket		  
UL 1285
100mm - 400mm   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Turner C909		  
UL 1285
4" - 24"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Turner Lock		  
UL 1285
4" - 12"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Tyton Gasket		  
UL 1285
3" - 64"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 VF Sewer		  
UL 1285
4" - 8"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Turner Biax C909		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.

Gaskets+ [1]		  
SBR		  
SBR HT627 Turner Biax IPS		  
UL 1285
4" - 16"   

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Product is Certified as meeting the elastomeric gasket requirements of UL 1285.


Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 1 Piece RR		  
ASTM F477
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 CIOD DD		  
ASTM F477
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 Platinum Pressure		  
ASTM F477
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 Rieber		  
ASTM F477
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
ASTM F477
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C905 1 Piece RR		  
ASTM F477
14"- 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C905 B/C Ring Certalok		  
ASTM F477
>= 4" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C905 Platinum Pressure		  
ASTM F477
14" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
ASTM F477
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 C909 Biax Mambo		  
ASTM F477
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 FIELD LOK 350®		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Fast Grip		  
ASTM F477
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Fastite Gasket		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Field LOK		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Flange Tyte		  
ASTM F477
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Fluid Tite		  
ASTM F477
>= 4" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
ASTM F477
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
ASTM F477
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
ASTM F477
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 IPS Biax Mambo		  
ASTM F477
3" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 IPS Hero		  
ASTM F477
1 1/2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 LOKX System DIPS		  
ASTM F477
4"-12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 LOKX System IPS		  
ASTM F477
4"-12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 MJ Field Lok		  
ASTM F477
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Metric Pressure		  
ASTM F477
50 mm - 630 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Metric Tyton		  
ASTM F477
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 One Piece Retainer Ring CIOD		  
ASTM F477
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 PIP DD		  
ASTM F477
10"- 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 PR IPS		  
ASTM F477
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
ASTM F477
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Rieber IPS		  
ASTM F477
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 S-Ring		  
ASTM F477
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Sure Stop		  
ASTM F477
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Tyton		  
ASTM F477
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Tyton CM		  
ASTM F477
3" - 42" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 TURNER C909		  
ASTM F477
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
ASTM F477
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
ASTM F477
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [G]		  
NBR		  
NBR HT4537 Yellowmine		  
ASTM F477
>= 4" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieberlok Gasket 		 
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 RCT Flex Tite C900		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Rieberlok Gasket 		 
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 RCT Flex Tite IPS Transition		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 A/T IPS Gasket		  
ASTM F477
1 1/2" - 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 C900 CIOD DD SBR Gasket		  
ASTM F477
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 CIOD RIEBER HR		  
ASTM F477
16"
18"
20"
24"
30"
14" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
ASTM F477
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
ASTM F477
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket		  
ASTM F477
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 C909 Biax Mambo Gasket		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 CIOD Hero		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Fast Grip		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Fastite Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 FIELD LOK 350®		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Field LOK SBR Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Flo Control IPS Gasket		  
ASTM F477
2 1/2" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Full Face Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 LOKX System IPS		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket		  
ASTM F477
1 1/2" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket		  
ASTM F477
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 IPS Biax Mambo Gasket		  
ASTM F477
3" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 IPS Hero		  
ASTM F477
1 1/2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 LOKX System DIPS		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 MJ Field Lok Gasket		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Lock Push On Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 One-Piece Retainer Ring CIOD Gasket		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 PIP DD SBR Gasket		  
ASTM F477
10" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Plastic Retainer Ring IPS Gasket		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Platinum Press SBR Ozone I Gasket		  
ASTM F477
63 mm - 225 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Push-On Gasket		  
ASTM F477
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Push-On Metric Gasket		  
ASTM F477
80 mm - 120 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 RCT		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Rieber CIOD Gasket		  
ASTM F477
4" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Sewer Ret/ Ring		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 VF Sewer		  
ASTM F477
4" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Rieber IPS Gasket		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket		  
ASTM F477
50 mm - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Platinum Gkt		  
ASTM F477
50 mm - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 S-Ring		  
ASTM F477
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Self Lock Push-On Gasket		  
ASTM F477
3" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Super Bell Tite Gasket		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 THAI Gasket		  
ASTM F477
100 mm - 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Turner C909		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Tyton Gasket		  
ASTM F477
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Turner Lock		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Turner Biax C909		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [3] [G]		  
SBR		  
SBR HT627 Turner Biax IPS		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1]		  
SBR		  
SBR HT727 C900 Rieber		  
ASTM F477
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 C900 Super Rieber		  
ASTM F477
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 C905 Rieber		  
ASTM F477
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 C905 Super Rieber		  
ASTM F477
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Defofo SBR		  
ASTM F477
100-500 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS 2241 Rieber		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Biax Mambo		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Ecoline		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Hero		  
ASTM F477
1 1/2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Hero SP		  
ASTM F477
1 1/2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Rieber		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Super Rieber		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 PR IPS		  
ASTM F477
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Platinum Ecoline		  
ASTM F477
50 mm - 315 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Platinum PBA SBR		  
ASTM F477
60 mm - 110 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Platinum Press SBR Ozone I Cold		  
ASTM F477
50 mm - 315 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Rieber Serie 1		  
ASTM F477
80 mm - 575 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 S-ring		  
ASTM F477
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 A/T IPS		  
ASTM F477
1 1/2" - 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 CIOD Hero		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Fast Grip		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Fastite		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Flo Control IPS		  
ASTM F477
2 1/2" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 IPS Hero		  
ASTM F477
1 1/2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Lock Push-On		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 One Piece Retaining Ring CIOD		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Platinum		  
ASTM F477
50 mm - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 PRR IPS		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Push-On		  
ASTM F477
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Rieber CIOD		  
ASTM F477
4" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Rieber IPS		  
ASTM F477
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Rieber Metric Pressure		  
ASTM F477
50 mm - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 S Ring		  
ASTM F477
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Self Lock Push-On		  
ASTM F477
3" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Super Bell Tite		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 THAI		  
ASTM F477
100 mm - 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Tyton		  
ASTM F477
3" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [1]		  
SBR		  
SBR HT727 Saneamiento		  
ASTM F477
110 mm - 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [2]		  
SBR		  
IR HT377 C905 B/C Ring Certalok		  
ASTM F477
>= 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for a maximum surface area to volume ratio of 0.127 sq.in./L.

Gaskets+ [1]		  
SBR		  
SBR HT727 PRR SEWER		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".

Gaskets+ [2]		  
SBR		  
IR HT377 Fluid Tite		  
ASTM F477
>= 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for a maximum surface area to volume ratio of 0.127 sq.in./L.

Gaskets+ [2]		  
SBR		  
IR HT377		  
ASTM F477
>= 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for a maximum surface area to volume ratio of 0.127 sq.in./L.

Gaskets+ [2]		  
SBR		  
IR HT377 Yellowmine		  
ASTM F477
>= 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[2] Certified for a maximum surface area to volume ratio of 0.127 sq.in./L.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Rieberlok Gasket 		 
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Rieberlok Gasket 		 
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 1 Piece RR		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [G]		  
EPDM		  
EPDM HT553 LOKX System DIPS		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [G]		  
EPDM		  
EPDM HT553 LOKX System IPS		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 T Saddle IP		  
ASTM F477
4" - 6" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 CIOD DD		  
ASTM F477
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 Platinum Pressure		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 Rieber		  
ASTM F477
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
ASTM F477
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C905 1 Piece RR		  
ASTM F477
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C905 Platinum Pressure		  
ASTM F477
14" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
ASTM F477
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 C909 Biax Mambo		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 FIELD LOK 350®		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Fast Grip		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Field LOK		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
ASTM F477
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
ASTM F477
1.5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
ASTM F477
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 IPS Biax Mambo		  
ASTM F477
3" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 IPS Hero		  
ASTM F477
1.5" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Metric Pressure		  
ASTM F477
50 - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Metric Tyton		  
ASTM F477
80 - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 One Piece Retainer Ring CIOD		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 PIP DD		  
ASTM F477
10" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 PR IPS		  
ASTM F477
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Rieber IPS		  
ASTM F477
1.5" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 S-Ring		  
ASTM F477
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Sure Stop		  
ASTM F477
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX C909		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX IPS		  
ASTM F477
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 TURNER C909		  
ASTM F477
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Tyton Gasket		  
ASTM F477
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 Tyton CM		  
ASTM F477
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ [1] [G]		  
EPDM		  
EPDM HT553 USIFLEX		  
ASTM F477
30" - 54" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 LOKX System DIPS		  
CSA B137.3
4"-12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Rieberlok Gasket 		 
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 LOKX System IPS		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 T Saddle IP		  
CSA B137.3
4" - 6" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 1 Piece RR		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 CIOD DD		  
CSA B137.3
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 Platinum Pressure		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 Rieber		  
CSA B137.3
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
CSA B137.3
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C905 1 Piece RR		  
CSA B137.3
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C905 Platinum Pressure		  
CSA B137.3
14" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
CSA B137.3
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 C909 Biax Mambo		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 FIELD LOK 350®		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Fast Grip		  
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Field LOK		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Flange Tyte		  
CSA B137.3
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
CSA B137.3
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
CSA B137.3
1.5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
CSA B137.3
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 IPS Biax Mambo		  
CSA B137.3
3" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 IPS Hero		  
CSA B137.3
1.5" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Metric Pressure		  
CSA B137.3
50 - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Metric Tyton		  
CSA B137.3
80 - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 One Piece Retainer Ring CIOD		  
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 PIP DD		  
CSA B137.3
10" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 PR IPS		  
CSA B137.3
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Rieber IPS		  
CSA B137.3
1.5" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 S-Ring		  
CSA B137.3
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Sure Stop		  
CSA B137.3
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
EPDM HT553 TURNER BIAX C909		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 T Saddle IP		  
CSA B137.3.1
4" - 6" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Y Saddle IP		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
EPDM HT553 TURNER BIAX IPS		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 TURNER C909		  
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Tyton Gasket		  
CSA B137.3
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Tyton CM		  
CSA B137.3
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 1 Piece RR		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 CIOD DD		  
CSA B137.3
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 Platinum Pressure		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 Rieber		  
CSA B137.3
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
CSA B137.3
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C905 1 Piece RR		  
CSA B137.3
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 MJ Field Lok		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C905 Platinum Pressure		  
CSA B137.3
14" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
CSA B137.3
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C909 Biax Mambo		  
CSA B137.3
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Fast Grip		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Fastite Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Field LOK		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 FIELD LOK 350®		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Flange Tyte		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
CSA B137.3
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
CSA B137.3
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS Biax Mambo		  
CSA B137.3
3" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS Hero		  
CSA B137.3
1 1/2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 LOKX System DIPS		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 LOKX System IPS		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Metric Pressure		  
CSA B137.3
50 mm - 630 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Metric Tyton		  
CSA B137.3
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 MJ Field Lok		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 One Piece Retainer Ring CIOD		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 PIP DD		  
CSA B137.3
10" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 PR IPS		  
CSA B137.3
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Rieber IPS		  
CSA B137.3
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 S-Ring		  
CSA B137.3
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Sure Stop		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
CSA B137.3
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
CSA B137.3
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 TURNER C909		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Tyton		  
CSA B137.3
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Tyton CM		  
CSA B137.3
3" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
RCT Flex Tite C900		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
RCT Flex Tite IPS Transition		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 A/T IPS Gasket		  
CSA B137.3
1 1/2" - 4" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Rieberlok Gasket 		 
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 C900 CIOD DD SBR Gasket		  
CSA B137.3
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
CSA B137.3
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
CSA B137.3
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket		  
CSA B137.3
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 C909 Biax Mambo Gasket		  
CSA B137.3
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 CIOD Hero		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 CIOD RIEBER HR		  
CSA B137.3
14", 16", 18", 20", 24", 30" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Fast Grip		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Fastite Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 FIELD LOK 350®		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Field LOK SBR		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Flange Tyte		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Flo Control IPS Gasket		  
CSA B137.3
2 1/2" - 8" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Full Face Flange Tyte		  
CSA B137.3
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket		  
CSA B137.3
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket 		 
CSA B137.3
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 IPS Biax Mambo Gasket		  
CSA B137.3
3" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 IPS Hero		  
CSA B137.3
1 1/2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Lock Push On Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 LOKX System DIPS		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 LOKX System IPS		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 MJ Field Lok Gasket		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 One-Piece Retainer Ring		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 PIP DD SBR Gasket		  
CSA B137.3
10" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Plastic Retainer Ring IPS		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Platinum Press SBR Ozone I		  
CSA B137.3
63 mm - 225 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Push-On Gasket		  
CSA B137.3
3" - 42" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Push-On Metric Gasket		  
CSA B137.3
80 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 RCT		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Rieber CIOD Gasket		  
CSA B137.3
4" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Rieber IPS Gasket		  
CSA B137.3
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket 		 
CSA B137.3
50 mm - 630 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Rieber Metric Platinum Pressure		  
CSA B137.3
50 mm - 1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 S-Ring		  
CSA B137.3
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Self Lock Push-On Gasket		  
CSA B137.3
3" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Sewer Ret/Ring		  
CSA B137.3
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Super Bell Tite Gasket		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets* + ¢ [3] [4] [5]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
CSA B137.3
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 USIFLEX		  
CSA B137.3
30" - 54" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
SBR HT627 THAI Gasket		  
CSA B137.3
100 mm - 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
SBR HT627 Turner C909		  
CSA B137.3
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
SBR HT627 Turner Lock		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
SBR HT627 Tyton Gasket		  
CSA B137.3
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
SBR		  
SBR HT627 VF Sewer		  
CSA B137.3
4" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
Turner Biax C909		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
Turner Biax IPS		  
CSA B137.3
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C900 1 Piece RR		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C900 CIOD DD		  
CSA B137.3.1
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C900 Platinum Pressure		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C900 Rieber		  
CSA B137.3.1
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C900 Super Rieber Patented		  
CSA B137.3.1
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C905 1 Piece RR		  
CSA B137.3.1
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C905 Platinum Pressure		  
CSA B137.3.1
14" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C905 Super Rieber Patented		  
CSA B137.3.1
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 C909 Biax Mambo		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 FIELD LOK 350®		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Fast Grip		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Fastite Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Field LOK		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Full Face Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Rieber		  
CSA B137.3.1
1.5" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 IPS 2241 Super Rieber		  
CSA B137.3.1
14" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 IPS Biax Mambo		  
CSA B137.3.1
3" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 IPS Hero		  
CSA B137.3.1
1.5" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Metric Pressure		  
CSA B137.3.1
50 - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Metric Tyton		  
CSA B137.3.1
80 - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 One Piece Retainer Ring CIOD		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 PIP DD		  
CSA B137.3.1
10" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 PR IPS		  
CSA B137.3.1
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Rest MJ (PVC)		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Rieber IPS		  
CSA B137.3.1
1.5" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 S-Ring		  
CSA B137.3.1
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Sure Stop		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX C909		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 TURNER BIAX IPS		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 TURNER C909		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Tyton Gasket		  
CSA B137.3.1
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Tyton CM		  
CSA B137.3.1
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 USIFLEX		  
CSA B137.3.1
30" - 54" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [G]		  
EPDM		  
EPDM HT553 Turner Lock 		 
ASTM F477
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [4] [G]		  
EPDM		  
EPDM HT553 Turner Lock		  
CSA B137.3
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [1] [5] [G]		  
EPDM		  
EPDM HT553 Turner Lock		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 1 Piece RR		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 CIOD DD		  
CSA B137.3.1
4" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 Platinum Pressure		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 Rieber		  
CSA B137.3.1
2" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented 		 
CSA B137.3.1
2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C905 1 Piece RR		  
CSA B137.3.1
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C905 Platinum Pressure		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented 		 
CSA B137.3.1
14" - 48" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 C909 Biax Mambo		  
CSA B137.3.1
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Fast Grip		  
CSA B137.3.1
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Fastite Gasket		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Field LOK		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 FIELD LOK 350®		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Flange Tyte		  
CSA B137.3.1
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
CSA B137.3.1
4" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
CSA B137.3.1
1 1/2" - 18" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
CSA B137.3.1
14" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS Biax Mambo		  
CSA B137.3.1
3" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 IPS Hero		  
CSA B137.3.1
1 1/2" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 LOKX System DIPS		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 LOKX System IPS		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Metric Pressure		  
CSA B137.3.1
50 mm - 630 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Metric Tyton		  
CSA B137.3.1
80 mm -1200 mm 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 MJ Field Lok		  
CSA B137.3.1
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 One Piece Retainer Ring CIOD		  
CSA B137.3.1
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 PIP DD		  
CSA B137.3.1
10" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 PR IPS		  
CSA B137.3.1
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
CSA B137.3.1
4" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Rieber IPS		  
CSA B137.3.1
1 1/2" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 S-Ring		  
CSA B137.3.1
6" - 12" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Sure Stop		  
CSA B137.3.1
4" - 36" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
CSA B137.3.1
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
CSA B137.3.1
4" - 16" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 TURNER C909		  
CSA B137.3.1
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Tyton		  
CSA B137.3.1
3" - 64" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + [1] [4] [5] [G]		  
NBR		  
NBR HT4537 Tyton CM		  
CSA B137.3.1
3" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified for use in distribution systems only, with width exposure of no more than 1/2"
    in pipes with diameters shown in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
RCT Flex Tite C900		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
RCT Flex Tite IPS Transition		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 A/T IPS Gasket		  
CSA B137.3.1
1 1/2" - 4" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 C900 CIOD DD SBR Gasket		  
CSA B137.3.1
4" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 C900 Rieber Gasket		  
CSA B137.3.1
2" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket		  
CSA B137.3.1
2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket		  
CSA B137.3.1
14" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 C909 Biax Mambo Gasket		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 CIOD Hero		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 CIOD RIEBER HR		  
CSA B137.3.1
14", 16", 18", 20", 24", 30" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Fast Grip		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Fastite Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 FIELD LOK 350®		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Field LOK SBR		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Flo Control IPS Gasket		  
CSA B137.3.1
2 1/2" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Full Face Flange Tyte		  
CSA B137.3.1
4" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket		  
CSA B137.3.1
1 1/2" - 18" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket		  
CSA B137.3.1
14" 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 IPS Biax Mambo Gasket		  
CSA B137.3.1
3" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 IPS Hero		  
CSA B137.3.1
1 1/2" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Lock Push On Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 LOKX System DIPS		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 LOKX System IPS		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 MJ Field Lok Gasket		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 One-Piece Retainer Ring		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 PIP DD SBR Gasket		  
CSA B137.3.1
10" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Plastic Retainer Ring IPS		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Platinum Press SBR Ozone I		  
CSA B137.3.1
63 mm - 225 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Push-On Gasket		  
CSA B137.3.1
3" - 42" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Push-On Metric Gasket		  
CSA B137.3.1
80 mm - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 RCT		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Rest MJ (PVC)		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Rieber CIOD Gasket		  
CSA B137.3.1
4" - 48" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Rieber IPS Gasket		  
CSA B137.3.1
1 1/2" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket 		 
CSA B137.3.1
50 mm - 630 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Rieber Metric Platinum Pressure		  
CSA B137.3.1
50 mm - 1200 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 S-Ring		  
CSA B137.3.1
6" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Self Lock Push-On Gasket		  
CSA B137.3.1
3" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Sewer Ret/Ring		  
CSA B137.3.1
4' - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Super Bell Tite Gasket		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Sure Stop Gasket		  
CSA B137.3.1
4" - 36" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 THAI Gasket		  
CSA B137.3.1
100 mm - 400 mm 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Turner C909		  
CSA B137.3.1
4" - 24" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Turner Lock		  
CSA B137.3.1
4" - 12" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 Tyton Gasket		  
CSA B137.3.1
3" - 64" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
SBR HT627 VF Sewer		  
CSA B137.3.1
4" - 8" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
Turner Biax C909		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets+ ¢ [3] [4] [5] [G]		  
SBR		  
Turner Biax IPS		  
CSA B137.3.1
4" - 16" 

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] Certification is for width exposure of no more than 1/2" in pipes with diameters shown
    in "size".
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[5] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + ¢ [4] [G]		  
EPDM		  
EPDM HT5537 Fluid-Tite		  
CSA B137.3
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + ¢ [4] [G]		  
EPDM		  
EPDM HT5537 Fluid-Tite RJIB		  
CSA B137.3
6" - 18.52" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + ¢ [4] [G]		  
EPDM		  
EPDM HT5537 Fluid-Tite		  
ASTM F477
4" - 24" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Gaskets* + ¢ [4] [G]		  
EPDM		  
EPDM HT5537 Fluid-Tite RJIB		  
ASTM F477
6" - 18.52" 

* Certified for Shore Hardness 55 +/-5 Durometer.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


Sewer Main - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Gaskets¢ [1]		  
SBR		  
HT527 Sewer Gasket		  
CSA B182.2
2" - 27" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
HT527 Manhole Rieber		  
CSA B182.2
110 mm - 630 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
HT527 Sewer Super Rieber		  
CSA B182.2
15" - 27" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets		  
SBR		  
HT527 Sewer Gasket		  
ASTM F477
2" - 27"

Gaskets		  
SBR		  
HT527 Manhole Rieber		  
ASTM F477
110 mm - 630 mm

Gaskets		  
SBR		  
HT527 Sewer Super Rieber		  
ASTM F477
15" - 27"

Gaskets		  
SBR		  
HT527 Sewer Rieber		  
ASTM F477
4" - 12"

Gaskets		  
SBR		  
HT527 Mambo Sewer		  
ASTM F477
100 mm - 400 mm
4" - 10"

Gaskets		  
SBR		  
HT527 Mambo Tigre		  
ASTM F477
4" - 10"

Gaskets		  
SBR		  
HT527 Platinum PIP		  
ASTM F477
4" - 18"

Gaskets		  
SBR		  
HT527 Platinum Sewer		  
ASTM F477
90 mm - 360 mm

Gaskets¢ [1]		  
SBR		  
HT527 Sewer Rieber		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
HT527 Mambo Sewer		  
CSA B182.2
100 mm - 400 mm
4" - 10" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
HT527 Mambo Tigre		  
CSA B182.2
4" - 10" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
HT527 Platinum PIP		  
CSA B182.2
4" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
HT527 Platinum Sewer		  
CSA B182.2
90 mm - 360 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets		  
TPE		  
TPV HTP55		  
ASTM F477
4" - 8"

Gaskets		  
TPE		  
HTP55 PT-Fix		  
ASTM F477
4" - 8"

Gaskets¢ [1]		  
TPE		  
TPV HTP55		  
CSA B182.2
4"- 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
HTP55 PT-Fix		  
CSA B182.2
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets		  
TPE		  
TPV HTP55 PT-FIX Sewer		  
ASTM F477
4" - 12"

Gaskets		  
TPE		  
TPV HTP55 PT-FIX DWV		  
ASTM F477
4" - 8"

Gaskets		  
TPE		  
TPV HTP55 gaskets		  
ASTM F477
4" - 12"

Gaskets¢ [1]		  
TPE		  
TPV HTP55 PT-FIX Sewer		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 PT-FIX DWV		  
CSA B182.2
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
TPE		  
TPV HTP55 gaskets		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 RCT Flex Tite C900 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 RCT Flex Tite IPS Transition 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 A/T IPS Gasket 		  
CSA B182.2
1.5" - 4" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C900 CIOD DD SBR Gasket 		  
CSA B182.2
4" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 CIOD RIEBER HR		  
CSA B182.2
14"
16"
18"
20"
24"
30" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C900 Rieber Gasket 		  
CSA B182.2
2" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C900 Super Rieber Patented Gasket 		  
CSA B182.2
2" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C905 Super Rieber Patented Gasket 		  
CSA B182.2
14" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 C909 Biax Mambo Gasket 		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 CIOD Hero 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 FIELD LOK 350® 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Fast Grip 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Fastite Gasket 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Field LOK SBR Gasket 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Flange Tyte 		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Flo Control IPS Gasket 		  
CSA B182.2
2.5" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Full Face Flange Tyte 		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 IPS 2241 Rieber Gasket 		  
CSA B182.2
1.5" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 IPS 2241 Super Rieber Gasket 		  
CSA B182.2
14" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 IPS Biax Mambo Gasket 		  
CSA B182.2
3" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 IPS Hero 		  
CSA B182.2
1.5" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Lock Push On Gasket 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 LOKX System DIPS		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 LOKX System IPS		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 MJ Field Lok Gasket 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 One-Piece Retainer Ring CIOD Gasket		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 PIP DD SBR Gasket 		  
CSA B182.2
10" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Plastic Retainer Ring IPS Gasket 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Platinum Press SBR Ozone I Gasket 		  
CSA B182.2
63 mm -225 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Push-On Gasket 		  
CSA B182.2
3" - 42" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Push-On Metric Gasket 		  
CSA B182.2
80 mm - 1200 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 RCT 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rest MJ (PVC) 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber CIOD Gasket 		  
CSA B182.2
4" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber IPS Gasket 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber Metric Pressure Gasket 		  
CSA B182.2
50 mm - 630 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Rieber Metric Pressure Platinum Gkt		  
CSA B182.2
50 mm - 1200 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 S-Ring 		  
CSA B182.2
6" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Self Lock Push-On Gasket 		  
CSA B182.2
3" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Sewer Ret/Ring 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Super Bell Tite Gasket 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Sure Stop Gasket 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 THAI Gasket 		  
CSA B182.2
100 mm - 400 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Turner Lock		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Turner C909 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Tyton Gasket 		  
CSA B182.2
3" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 VF Sewer 		  
CSA B182.2
4" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Turner Biax C909 		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT627 Turner Biax IPS 		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 C900 Rieber 		  
CSA B182.2
2" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 C900 Super Rieber 		  
CSA B182.2
2" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 C905 Rieber 		  
CSA B182.2
14" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 C905 Super Rieber 		  
CSA B182.2
14" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 Defofo SBR 		  
CSA B182.2
100 mm - 500 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS 2241 Rieber 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS Biax Mambo 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS Ecoline 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS Hero 		  
CSA B182.2
1.5" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS Hero SP 		  
CSA B182.2
1.5" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS Rieber 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS Super Rieber 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PR IPS 		  
CSA B182.2
6" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 Platinum Ecoline 		  
CSA B182.2
50 mm - 315 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 Platinum PBA SBR 		  
CSA B182.2
60 mm - 110mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 Platinum Press SBR Ozone I Cold 		  
CSA B182.2
50 mm - 315 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 Rieber Serie 1 		  
CSA B182.2
80 mm - 575 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 S-ring 		  
CSA B182.2
6" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 A/T IPS 		  
CSA B182.2
1.5" - 4" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 CIOD HERO 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 FAST GRIP 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 FASTITE 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 FLO CONTROL IPS 		  
CSA B182.2
2.5" - 8" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 IPS HERO 		  
CSA B182.2
1.5 - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 LOCK PUSH ON 		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 ONE PIECE RETAINING RING CIOD 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PLATINUM 		  
CSA B182.2
50 mm - 630 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PRR IPS 		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PRR SEWER  		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 PUSH ON 		  
CSA B182.2
3" - 42" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 RIEBER CIOD 		  
CSA B182.2
4" - 48 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 RIEBER IPS 		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 RIEBER METRIC PRESSURE 		  
CSA B182.2
50 mm - 630 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 S RING 		  
CSA B182.2
6" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 SELF LOCK PUSH ON 		  
CSA B182.2
3" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 SUPER BELL TITE 		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 THAI 		  
CSA B182.2
100 mm - 400 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 TYTON 		  
CSA B182.2
3" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
SBR		  
SBR HT727 Saneamiento 		  
CSA B182.2
110 mm - 400 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 1 Piece RR		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 CIOD DD		  
CSA B182.2
4" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 Platinum Pressure		  
CSA B182.2
4" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 Rieber		  
CSA B182.2
2" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C900 Super Rieber Patented		  
CSA B182.2
2" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C905 1 Piece RR		  
CSA B182.2
14" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C905 B/C Ring Certalok		  
CSA B182.2
>= 4" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C905 Platinum Pressure		  
CSA B182.2
14" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C905 Super Rieber Patented		  
CSA B182.2
14" - 48" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 C909 Biax Mambo		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 FIELD LOK 350®		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Fast Grip		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Fastite Gasket		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Field LOK		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Flange Tyte		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Fluid Tite		  
CSA B182.2
>= 4" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Full Face Flange Tyte		  
CSA B182.2
4" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 IPS 2241 Rieber		  
CSA B182.2
1.5" - 18" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 IPS 2241 Super Rieber		  
CSA B182.2
14" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 IPS Biax Mambo		  
CSA B182.2
3" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 IPS Hero		  
CSA B182.2
1.5" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 LOKX System DIPS		  
CSA B182.2
4"- 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 LOKX System IPS		  
CSA B182.2
4"- 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 MJ Field Lok		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Metric Pressure		  
CSA B182.2
50 mm - 630 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Metric Tyton		  
CSA B182.2
80 mm - 1200 mm 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 One Piece Retainer Ring CIOD		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 PIP DD		  
CSA B182.2
10" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 PR IPS		  
CSA B182.2
6" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Rest MJ (PVC)		  
CSA B182.2		 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Rieber IPS		  
CSA B182.2
1.5" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 S-Ring		  
CSA B182.2
6" - 12" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Sure Stop		  
CSA B182.2
4" - 36" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 TURNER BIAX C909		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 TURNER BIAX IPS		  
CSA B182.2
4" - 16" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 TURNER C909		  
CSA B182.2
4" - 24" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Tyton		  
CSA B182.2
3" - 64" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Tyton CM		  
CSA B182.2
3" - 42" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Gaskets¢ [1]		  
NBR		  
NBR HT4537 Yellowmine		  
CSA B182.2
>= 4" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Number of matching Manufacturers is 1
Number of matching Products is 985
Processing time was 1 seconds