NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, November 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?Company=25102&Standard=014&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| J-M Manufacturing Co., Inc. DBA JM Eagle |  |
| 9 Peach Tree Hill Road | |
| Livingston, NJ 07039 | |
| United States | |
| 310-693-8200 | |
| Visit this company's website |
Facility : # 1 Adel, GA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 1 1/4" - 16" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM F891 |
|||
| 1 1/2" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
JM Eagle |
ASTM D2513 |
|||
| 1/2" CTS SDR 7 | ||||||
| 3/4" CTS SDR 9.8 | ||||||
| 1" CTS SDR 9.3 | ||||||
| 1" CTS SDR 11.5 | ||||||
| 1" CTS SDR 12.5 | ||||||
| 1 1/4" CTS SDR 11.5 | ||||||
| 1 1/4" CTS SDR 15.3 | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS SDR 9.3 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 2" IPS SDR 11.5 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 11.5 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 11.5 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 11.5 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 11.5 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 11.5 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| IPS 4" - 65"[2] | ||||||
|
DIPS 3" - 60"[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26[1] [2] |
||||||
|
1" - 3" DR 26[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 63" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe# * |
PVC |
J-M Manufacturing |
ASTM D2729 |
|||
| 2" - 6" | ||||||
# This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], and/or [J-M Manufacturing Logo]. * Certified product is solid wall, non-perforated pipe. |
||||||
Pipe# * |
PVC |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
# This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], and/or [J-M Manufacturing Logo]. * Certified product is solid wall, non-perforated pipe. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 63" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 2 Batchelor, LA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 1 1/4" - 16" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM F891 |
|||
| 1 1/2" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 6" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § [G] |
PVC |
J-M Manufacturing |
ASTM F480 |
|||
| 2" Sch 40 | ||||||
| 4" Sch 40 | ||||||
| 6" Sch 40 | ||||||
| 8" Sch 40 | ||||||
| 10" Sch 40 | ||||||
| 12" Sch 40 | ||||||
| 4" - 12" SDR 17 | ||||||
| 4" - 12" SDR 21 | ||||||
| 4" - 12" SDR 26 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 4 Columbia, MO
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVCO |
J-M Manufacturing |
UL 1285 |
|||
| PC 235: 6", 8", 10", 12" | ||||||
| PC 305: 6", 8" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle,
[JMM Logo] or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 4" - 12" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo]
and/orJM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 2"-12" DR 21 | ||||||
| 2"-12" DR 26 | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo]
and/orJM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + [G] |
PVCO |
J-M Manufacturing |
ASTM F1483 |
|||
| 6" - 12" IPS | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo]
and/orJM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + [G] |
PVCO |
J-M Manufacturing |
AWWA C909 |
|||
| 6" - 12" CIOD | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo]
and/orJM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 4" - 12" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo)
and/or JM Eagle and/or (JM Eagle Logo).
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 4" - 12" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo)
and/or JM Eagle and/or (JM Eagle Logo).
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 6 Fontana, CA
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVCO |
J-M Manufacturing |
UL 1285 |
|||
| PC 235: 6", 8", 10", 12", 14", 16", 18", 20", 24" | ||||||
| PC 305: 6", 8", 10", 12", 14", 16", 18", 20", 24" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle,
[JMM Logo] or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this
production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Solvent-weld and gasketed bell ends are not tested or Listed by NSF for this
production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + [G] |
PVCO |
J-M Manufacturing |
AWWA C909 |
|||
| PC 235: 4" - 24" | ||||||
| PC 305: 4" - 24" | ||||||
| PC 165: 4" - 24" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ¢ [G] |
PVCO |
J-M Manufacturing |
CSA B137.3.1 |
|||
| PC 165: 4" - 24" | ||||||
| PC 235: 4" - 24" | ||||||
| PC 305: 4" - 24" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 7 Hastings, NE
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
Eagle |
ASTM D2665 |
|||
| 1 1/4" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
PW Eagle |
ASTM D2665 |
|||
| 1 1/4" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
PW Pipe |
ASTM D2665 |
|||
| 1 1/4" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Electrical Conduit and Accessories
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* |
PVC |
J-M Manufacturing |
UL 651 |
|||
| 3/4" Sch 40 | ||||||
| 1" Sch 40 | ||||||
| 1 1/4" Sch 40 | ||||||
| 1 1/2" Sch 40 | ||||||
| 2" Sch 40 | ||||||
| 3" Sch 40 | ||||||
| 4" Sch 40 | ||||||
| 5" Sch 40 | ||||||
| 6" Sch 40 | ||||||
* Complies with requirements for above ground, underground, or indoor use; sunlight resistance and use with maximum 90°C wire. |
||||||
Oil and Gas Producing Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F2619 |
|||
| 1/2" - 24" SDR 7 | ||||||
| 1/2" - 24" SIDR 7.3 | ||||||
| 1/2" - 30" SDR 9 | ||||||
| 1/2" - 36" SDR 11 | ||||||
| 1/2" - 42" SDR 13.5 | ||||||
| 2" - 54" SDR 17 | ||||||
| 3" - 63" SDR 21 | ||||||
| 6" - 63" SDR 26 | ||||||
| 6" - 63" SDR 32.5 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle or [JM Eagle Logo]. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + § [G] |
PVC |
Baron |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
| 3/4" - 4" Sch 120 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
Eagle |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
| 3/4" - 4" Sch 120 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Eagle |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
| 3/4" - 4" Sch 120 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Eagle Solar-Blok |
ASTM D1785 |
|||
| 1/2" - 4" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Pipe |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
| 3/4" - 4" Sch 120 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Pipe Baron |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
| 3/4" - 4" Sch 120 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Pipe Solar-Blok |
ASTM D1785 |
|||
| 1/2" - 4" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
Solar-Blok |
ASTM D1785 |
|||
| 1/2" - 4" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
Baron |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 8" SDR 17 | ||||||
| 3/4" - 8" SDR 21 | ||||||
| 1 1/4" - 8" SDR 26 | ||||||
| 1 1/4" - 8" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
Eagle |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 8" SDR 17 | ||||||
| 3/4" - 8" SDR 21 | ||||||
| 1 1/4" - 8" SDR 26 | ||||||
| 1 1/4" - 8" SDR | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Eagle |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 8" SDR 17 | ||||||
| 3/4" - 8" SDR 21 | ||||||
| 1 1/4" - 8" SDR 26 | ||||||
| 1 1/4" - 8" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Eagle |
ASTM D2241 |
|||
| 1/2" - 4" SDR 21 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Pipe |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 8" SDR 17 | ||||||
| 3/4" - 8" SDR 21 | ||||||
| 1 1/4" - 8" SDR 26 | ||||||
| 1 1/4" - 8" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Pipe Baron |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 8" SDR 17 | ||||||
| 3/4" - 8" SDR 21 | ||||||
| 1 1/4" - 8" SDR 26 | ||||||
| 1 1/4" - 8" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
PW Pipe Solar-Bloc |
ASTM D2241 |
|||
| 1/2" - 4" SDR 21 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
Solar-Bloc |
ASTM D2241 |
|||
| 1/2" - 4" SDR 21 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| IPS 4" - 65"[2] | ||||||
|
DIPS 3" - 60"[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26[1] [2] |
||||||
|
1" - 3" DR 26[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard | |||
Well Casings# § [G] |
PVC |
Eagle Well Casing |
ASTM F480 |
|||
| 2" - 8" Sch 40 | ||||||
| 2" - 8" Sch 40 | ||||||
| 2" - 8" SDR 17 | ||||||
| 2" - 8" SDR 21 | ||||||
| 2" - 8" SDR 26 | ||||||
| 4 1/2" SDR 32.5 | ||||||
| 6 1/4" SDR 27.6 | ||||||
# This product may be marked with an alternate trade name: Eagle Loc Well Casing, J-M
Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Well Casings# § [G] |
PVC |
PW Pipe Well Casing |
ASTM F480 |
|||
| 2" - 8" Sch 40 | ||||||
| 2" - 8" Sch 80 | ||||||
| 2" - 8" SDR 17 | ||||||
| 2" - 8" SDR 21 | ||||||
| 2" - 8" SDR 26 | ||||||
| 4 1/2" SDR 32.5 | ||||||
| 6 1/4" SDR 27.6 | ||||||
# This product may be marked with an alternate trade name: Eagle Loc Well Casing, J-M
Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Well Casings# § [G] |
PVC |
Baron |
ASTM F480 |
|||
| 2" - 8" Sch 40 | ||||||
| 2" - 8" Sch 80 | ||||||
| 2" - 8" SDR 17 | ||||||
| 2" - 8" SDR 21 | ||||||
| 2" - 8" SDR 26 | ||||||
# This product may be marked with an alternate trade name: Eagle Loc Well Casing, J-M
Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# § [G] |
PVC |
PW Pipe Baron |
ASTM F480 |
|||
| 2" - 8" Sch 40 | ||||||
| 2" - 8" Sch 80 | ||||||
| 2" - 8" SDR 17 | ||||||
| 2" - 8" SDR 21 | ||||||
| 2" - 8" SDR 26 | ||||||
# This product may be marked with an alternate trade name: Eagle Loc Well Casing, J-M
Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 8 Kingman, AZ
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
JM Eagle |
ASTM D2513 |
|||
| 1/2" CTS SDR 7 | ||||||
| 3/4" CTS SDR 9.8 | ||||||
| 1" CTS SDR 9.3 | ||||||
| 1" CTS SDR 11.5 | ||||||
| 1" CTS SDR 12.5 | ||||||
| 1 1/4" CTS SDR 11.5 | ||||||
| 1 1/4" CTS SDR 15.3 | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS SDR 9.3 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 2" IPS SDR 11.5 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 11.5 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 11.5 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 11.5 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 11.5 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 11.5 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26 |
||||||
| 1" - 3" DR 26[1] | ||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| IPS 4" - 65"[2] | ||||||
|
DIPS 3" - 60"[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 3" - 18" SDR 7.3 | ||||||
| 3" - 20" SDR 8.3 | ||||||
| 3" - 24" SDR 9 | ||||||
| 3" - 30" SDR 9.3 | ||||||
| 3" - 36" SDR 11 | ||||||
| 3" - 36" SDR 13.5 | ||||||
| 3" - 48" SDR 15.5 | ||||||
| 3" - 54" SDR 17 | ||||||
| 3" - 54" SDR 21 | ||||||
| 3" - 54" SDR 26 | ||||||
| 3" - 63" SDR 32.5 | ||||||
| 3" - 63" Sch 41 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 3" - 18" SDR 7.3 | ||||||
| 3" - 20" SDR 8.3 | ||||||
| 3" - 24" SDR 9 | ||||||
| 3" - 30" SDR 9.3 | ||||||
| 3" - 36" SDR 11 | ||||||
| 3" - 36" SDR 13.5 | ||||||
| 3" - 48" SDR 15.5 | ||||||
| 3" - 54" SDR 17 | ||||||
| 3" - 54" SDR 21 | ||||||
| 3" - 54" SDR 26 | ||||||
| 3" - 63" SDR 32.5 | ||||||
| 3" - 63" Sch 41 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 9 Magnolia, AR
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ |
PE 4710 |
J-M Manufacturing |
FM 1613 |
|||
| PC 335: IPS 4" - 12" DR 7 | ||||||
| PC 250: IPS 4" - 12" DR 9 | ||||||
| PC 200: IPS 4" - 12" DR 11 | ||||||
| PC 335: DIOD 4" - 12" DR 7 | ||||||
| PC 250: DIOD 4" - 12" DR 9 | ||||||
| PC 200: DIOD 4" - 12" DR 11 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo] and/or [JMM Logo]. |
||||||
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
JM Eagle |
ASTM D2513 |
|||
| 1/2" CTS SDR 7 | ||||||
| 3/4" CTS SDR 9.8 | ||||||
| 1" CTS SDR 9.3 | ||||||
| 1" CTS SDR 11.5 | ||||||
| 1" CTS SDR 12.5 | ||||||
| 1 1/4" CTS SDR 11.5 | ||||||
| 1 1/4" CTS SDR 15.3 | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS SDR 9.3 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 2" IPS SDR 11.5 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 11.5 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 11.5 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 11.5 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 11.5 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 11.5 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 17[2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26[1] [2] |
||||||
|
1" - 3" DR 26[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| IPS 4" - 65"[2] | ||||||
|
DIPS 3" - 60"[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 10 Umatilla, OR
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 1 1/4" - 16" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM F891 |
|||
| 1 1/2" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested for Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested for Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * § |
PVC |
J-M Manufacturing |
ASTM D2729 |
|||
| 2" - 6" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Certified product is solid wall, non-perforated pipe. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 11 Cochranton, PA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 1 1/4" - 16" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM F891 |
|||
| 1 1/4" - 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Electrical Conduit and Accessories
| Product Type | Material Type | Trade Name | Product Standard | |||
PVC Foam Core Conduit# |
PVC |
J-M Manufacturing |
UL 651 |
|||
| 3", 4", 6" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. |
||||||
Rigid Conduit# |
PVC |
J-M Manufacturing |
CSA C22.2 No. 211.1 |
|||
| 2", 3", 3.5", 4", 5", 6" Type DB2/ES2 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. |
||||||
Rigid Conduit# |
PVC |
J-M Manufacturing |
CSA C22.2 No. 211.2 |
|||
| 0.5", 0.75", 1", 1.25", 1.5", 2" Sch 40 | ||||||
| 3", 4", 5", 6", 8" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. |
||||||
* Complies with requirements for above ground, underground or indoor use; sunlight resistance and use with maximum 90°C wire. NOTE: Only products bearing the NSF Mark are Certified.
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
JM Eagle |
ASTM D2513 |
|||
| 1/2" CTS SDR 7 | ||||||
| 3/4" CTS SDR 9.8 | ||||||
| 1" CTS SDR 9.3 | ||||||
| 1" CTS SDR 11.5 | ||||||
| 1" CTS SDR 12.5 | ||||||
| 1 1/4" CTS SDR 11.5 | ||||||
| 1 1/4" CTS SDR 15.3 | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS SDR 9.3 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 2" IPS SDR 11.5 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 11.5 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 11.5 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 11.5 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 11.5 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 11.5 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Oil and Gas Producing Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F2619 |
|||
| 1/2" - 24" SDR 7 | ||||||
| 1/2" - 24" SDR 7.3 | ||||||
| 1/2" - 30" SDR 9 | ||||||
| 1/2" - 36" SDR 11 | ||||||
| 1/2" - 42" SDR 13.5 | ||||||
| 2" - 54" SDR 17 | ||||||
| 3" - 63" SDR 21 | ||||||
| 6" - 63" SDR 26 | ||||||
| 6" - 63" SDR 32.5 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle or [JM Eagle Logo]. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [3] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| IPS 4" - 65"[3] | ||||||
[3] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 9 | ||||||
| 3/4" - 2" SDR 7.3 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D3035 |
|||
| 3/4" - 3" DR 7 | ||||||
| 3/4" - 3" DR 9 | ||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1/2" - 3/4" DR 26[1] [2] |
||||||
|
1" - 3" DR 26[1] |
||||||
[1] Gasketed bell end pipe [1] Gasketed bell end pipe
[2] Solvent bell end pipe
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 6" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
production facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + ¢ [G] |
PVC |
J-M Manufacturing |
CSA B137.3 |
|||
| 4" - 24" CIOD DR 14[1] | ||||||
|
4" - 24" CIOD DR 18[1] |
||||||
|
4" - 24" CIOD DR 25[1] |
||||||
|
1/2" - 8" Sch 40[2] |
||||||
|
1/2" - 8" IPS DR 32.5[2] |
||||||
[1] Gasketed bell end pipe [2] Solvent bell end pipe
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo) and/or JM Eagle and/or (JM Eagle Logo). |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe# ¢ |
PVC |
J-M Manufacturing |
CSA B182.2 |
|||
| 4" - 24" DR 26[1] | ||||||
|
4" - 24" DR 35[1] |
||||||
|
4", 6" DR 26[2] |
||||||
|
4", 6" DR 35[2] |
||||||
[1] Gasketed bell end pipe [2] Solvent bell end pipe # This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 12 Perris, CA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 1 1/4" – 12" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" – 12" Sch 40 | ||||||
| 1/2" – 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2"– 4" SDR 13.5 | ||||||
| 3/4" – 12" SDR 17 | ||||||
| 3/4" – 12" SDR 21 | ||||||
| 1" – 12" SDR 26 | ||||||
| 1 1/4" – 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 13 Pueblo, CO
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1/2" - 8" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 14 Stockton, CA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
ABS |
J-M Manufacturing |
ASTM D2661 |
|||
| 1 1/2" - 6" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# ¢ § |
ABS |
J-M Manufacturing |
ASTM F628 |
|||
| 1 1/2" - 6" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# * § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 1 1/4" - 12" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Solvent-weld and Gasketed bell ends are not tested or Listed by NSF for this production facility. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
JM Eagle |
ASTM D2949 |
|||
| 3 1/4" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1/2" - 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF for this production
facility.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * § |
PVC |
J-M Manufacturing |
ASTM D2729 |
|||
| 2" - 6" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Certified product is solid wall, non-perforated pipe. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D3034 |
|||
| 3" - 15" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Well Casings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § [G] |
PVC |
J-M Manufacturing |
ASTM F480 |
|||
| 2" Sch 40 | ||||||
| 4" Sch 40 | ||||||
| 6" Sch 40 | ||||||
| 8" Sch 40 | ||||||
| 10" Sch 40 | ||||||
| 12" Sch 40 | ||||||
| 4" - 12" SDR 17 | ||||||
| 4" - 12" SDR 21 | ||||||
| 4" - 12" SDR 26 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing, and/or PW
Eagle, and/or [JMM Logo], and/or JM Eagle, and/or [JM Eagle Logo].
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 15 Sunnyside, WA
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
JM Eagle |
ASTM D2513 |
|||
| 1/2" CTS SDR 7 | ||||||
| 3/4" CTS SDR 9.8 | ||||||
| 1" CTS SDR 9.3 | ||||||
| 1" CTS SDR 11.5 | ||||||
| 1" CTS SDR 12.5 | ||||||
| 1-1/4" CTS SDR 11.5 | ||||||
| 1-1/4" CTS SDR 15.3 | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 3/4" IPS SDR 9.3 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 2" IPS SDR 11.5 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 11.5 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 11.5 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 11.5 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 11.5 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 11.5 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe* ¢ |
PE 2708 |
JM Eagle |
CSA B137.4 |
|||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
Tubing* ¢ |
PE 2708 |
JM Eagle |
CSA B137.4 |
|||
| 1/2" CTS | ||||||
| 3/4" CTS | ||||||
| 1" CTS | ||||||
| 1 1/4" CTS | ||||||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Oil and Gas Producing Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F2619 |
|||
| 1/2" - 24" SDR 7 | ||||||
| 1/2" - 24" SDR 7.3 | ||||||
| 1/2" - 30" SDR 9 | ||||||
| 1/2" - 36" SDR 11 | ||||||
| 1/2" - 42" SDR 13.5 | ||||||
| 2" - 54" SDR 17 | ||||||
| 3" - 63" SDR 21 | ||||||
| 6" - 63" SDR 26 | ||||||
| 6" - 63" SDR 32.5 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle or [JM Eagle Logo]. |
||||||
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| DIPS 3" - 60"[2] | ||||||
|
IPS 4" - 65"[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
ASTM D3035 |
|||
| 3/4" - 3" DR 7 | ||||||
| 3/4" - 3" DR 9 | ||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
1/2" DR 17[1] [2] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1/2" - 3/4" DR 21[1] [2] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
[1] These sizes shall not be marked with a CC oxidative resistance classification and are
not certified for use in applications where an oxidative resistance classification (e.g.
CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[1] These sizes shall not be marked with a CC oxidative resistance classification and are
not certified for use in applications where an oxidative resistance classification (e.g.
CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 17 Tulsa, OK
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ |
PE 4710 |
J-M Manufacturing |
FM 1613 |
|||
| PC 335: IPS 4" - 24" DR 7 | ||||||
| PC 250: IPS 4" - 24" DR 9 | ||||||
| PC 200: IPS 4" - 24" DR 11 | ||||||
| PC 335: DIOD 4" - 24" DR 7 | ||||||
| PC 250: DIOD 4" - 24" DR 9 | ||||||
| PC 200: DIOD 4" - 24" DR 11 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo] and/or [JMM Logo]. |
||||||
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* § |
PE 2708 |
JM Eagle |
ASTM D2513 |
|||
| 1/2" CTS SDR 7 | ||||||
| 3/4" CTS SDR 9.8 | ||||||
| 1" CTS SDR 9.3 | ||||||
| 1" CTS SDR 11.5 | ||||||
| 1" CTS SDR 12.5 | ||||||
| 1 1/4" CTS SDR 11.5 | ||||||
| 1 1/4" CTS SDR 15.3 | ||||||
| 1/2" IPS SDR 9.3 | ||||||
| 1/2" IPS SDR 11 | ||||||
| 3/4" IPS - copy SDR 9.3 | ||||||
| 3/4" IPS SDR 11 | ||||||
| 1" IPS SDR 11 | ||||||
| 1 1/4" IPS SDR 10 | ||||||
| 1 1/4" IPS SDR 11 | ||||||
| 1 1/2" IPS SDR 11 | ||||||
| 2" IPS SDR 11 | ||||||
| 2" IPS SDR 11.5 | ||||||
| 3" IPS SDR 11 | ||||||
| 3" IPS SDR 11.5 | ||||||
| 3" IPS SDR 13.5 | ||||||
| 3" IPS SDR 17 | ||||||
| 4" IPS SDR 11 | ||||||
| 4" IPS SDR 11.5 | ||||||
| 4" IPS SDR 13.5 | ||||||
| 4" IPS SDR 17 | ||||||
| 6" IPS SDR 11 | ||||||
| 6" IPS SDR 11.5 | ||||||
| 6" IPS SDR 13.5 | ||||||
| 6" IPS SDR 17 | ||||||
| 8" IPS SDR 11 | ||||||
| 8" IPS SDR 11.5 | ||||||
| 8" IPS SDR 13.5 | ||||||
| 10" IPS SDR 13.5 | ||||||
| 10" IPS SDR 15.5 | ||||||
| 10" IPS SDR 17 | ||||||
| 12" IPS SDR 11 | ||||||
| 12" IPS SDR 11.5 | ||||||
| 12" IPS SDR 13.5 | ||||||
| 12" IPS SDR 17 | ||||||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Eagle |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Eagle |
ASTM D2239 |
|||
| 3/4" - 2" SIDR 5.3 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Eagle |
ASTM D3035 |
|||
| 1/2" DR 7[1] | ||||||
|
3/4" - 3" DR 7 |
||||||
| 1/2" DR 9[1] | ||||||
|
3/4" - 3" DR 9 |
||||||
| 1/2" - 3" DR 11[1] | ||||||
|
1/2" - 3" DR 13.5[1] |
||||||
|
3/4" - 3" DR 17[1] |
||||||
|
1" - 3" DR 21[1] |
||||||
|
1" - 3" DR 26[1] |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Eagle |
ASTM F714 |
|||
| IPS 4" - 65"[2] | ||||||
|
DIPS 3" - 60"[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM D2737 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
Pipe^ |
PE 4710 |
J-M Manufacturing |
ASTM F714 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 18 Visalia, CA
Drain, Waste, and Vent - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# § |
PVC |
J-M Manufacturing |
ASTM D2665 |
|||
| 2" - 16" Sch 40 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing, JM Eagle, or [JM Eagle] Logo. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" – 12" Sch 40 | ||||||
| 1/2" – 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2"– 4" SDR 13.5 | ||||||
| 3/4" – 12" SDR 17 | ||||||
| 3/4" – 12" SDR 21 | ||||||
| 1" – 12" SDR 26 | ||||||
| 1 1/4" – 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
| 6" - 12" SDR 64 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 19 Wharton, TX
Fire Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVCO |
J-M Manufacturing |
UL 1285 |
|||
| PC 165: 16" | ||||||
| PC 235: 6", 8", 10", 12" | ||||||
| PC 305: 6", 8" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle,
[JMM Logo] or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 12" Sch 40 | ||||||
| 1" - 12" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Gasketed bell ends are not tested or Listed by NSF.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PVCO |
J-M Manufacturing |
ASTM F1483 |
|||
| 6" - 12" IPS | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PVCO |
J-M Manufacturing |
AWWA C909 |
|||
| 6" - 16" CIOD | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo)
and/or JM Eagle and/or (JM Eagle Logo).
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo]
and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 20 Wilton, IA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D1785 |
|||
| 1/2" - 8" Sch 40 | ||||||
| 1" - 8" Sch 80 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Solvent-weld and gasketed bell ends are not tested or Listed by NSF.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# * + § [G] |
PVC |
J-M Manufacturing |
ASTM D2241 |
|||
| 1/2" - 4" SDR 13.5 | ||||||
| 3/4" - 12" SDR 17 | ||||||
| 3/4" - 12" SDR 21 | ||||||
| 1" - 12" SDR 26 | ||||||
| 1 1/4" - 12" SDR 32.5 | ||||||
| 3" - 12" SDR 41 | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
* Solvent-weld and gasketed bell ends are not tested or Listed by NSF.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo)
and/or JM Eagle and/or (JM Eagle Logo).
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe# + [G] |
PVC |
J-M Manufacturing |
AWWA C900 |
|||
| 14" - 48" | ||||||
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo]
and/or JM Eagle and/or [JM Eagle Logo].
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 744
Processing time was 1 seconds
