NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, May 14, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=AWWA+C901&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!

NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Advanced Drainage Systems, Inc. 
4640 Trueman Boulevard
Hilliard, OH 43026 
United States 
800-733-7473 
614-658-0050
Visit this company's website

Facility : Bakersfield, CA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
ADS PolyFlex 4710
 
AWWA C901
3/4" - 2" CTS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Vicksburg, MS

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
ADS PolyFlex 4710
 
AWWA C901
3/4" - 2" CTS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Harrisonville, MO

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
ADS PolyFlex 4710
 
AWWA C901
3/4" - 2" CTS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Findlay, OH

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
ADS PolyFlex 4710
 
AWWA C901
3/4" - 2" CTS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Ennis, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
ADS PolyFlex 4710
 
AWWA C901
3/4" - 2" CTS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Centennial Plastics, Inc. 
1830 Centennial Avenue
P.O. Box 329 
Hastings, NE 68901 
United States 
866-851-2227 
402-462-2227
Visit this company's website

Facility : Nampa, ID

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ §
 
PE 3608/4710
 
CenCore HDPE
 
AWWA C901
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §
 
PE 3608/4710
 
CenCore HDPE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §
 
PE 4710
 
CenFlo HDPE
 
AWWA C901
3/4" - 2" SIDR 11.5
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §
 
PE 3608/4710
 
CenFlo HDPE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

Pipe+ §
 
PE 3608/4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Geothermal Applications

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PE 3608/4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21

Pipe
 
PE 4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21


Facility : Hastings, NE

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ § [G]
 
PE 3608/4710
 
CPL HDPE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608/4710
 
CPL Potable Water
 
AWWA C901
3/4" - 2" SIDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ § [G]
 
PE 3608/4710
 
CenCore HDPE
 
AWWA C901
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ § [G]
 
PE 4710
 
CenFlo HDPE
 
AWWA C901
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
CenFlo HDPE
 
AWWA C901
3/4" - 2" SIDR 11.5
2" SIDR 15
2" SIDR 19

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ § [G]
 
PE 3608/4710
 
CenCore HDPE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ § [G]
 
PE 3608/4710
 
CenFlo HDPE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608/4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Geothermal Applications

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PE 3608/4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21

Pipe
 
PE 4710
 
CenFuse
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3/4" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Cresline Plastic Pipe Co., Inc. 
600 Cross Pointe Boulevard 
Evansville, IN 47715 
United States 
270-826-8317

Facility : Council Bluffs, IA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing+ [G]
 
PE 4710
 
Cresline® HD-CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing+ [G]
 
PE 4710
 
Cresline® CE Blue®
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Henderson, KY

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing+ [G]
 
PE 4710
 
Cresline® CE Blue®
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing+ [G]
 
PE 4710
 
Cresline® HD-CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Mechanicsburg, PA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing+ [G]
 
PE 4710
 
Cresline® CE Blue®
 
AWWA C901
3/4" - 2" SIDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing+ [G]
 
PE 4710
 
Cresline® HD-CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Encoma Ltd. 
26082 Road 51 North
P.O. Box 219 
Elm Creek, MB R0G 0N0 
Canada 
204-745-8920
Visit this company's website

Facility : Elm Creek, Manitoba, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
Encoma
 
AWWA C901
3/4" - 3" DR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


 
Endot Industries, Inc. 
60 Green Pond Road
Rockaway, NJ 07866 
United States 
800-443-6368 
973-625-8500
Visit this company's website

Facility : Rockaway, NJ

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 4710
 
ENDOT
 
AWWA C901
3/4" - 3" SDR 9

* The trade designation "Endot" may or may not be followed by any of the following
  designations:
  ENDOPLUS, ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM,
  GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY,
  ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Pryor Creek, OK

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 4710
 
ENDOT
 
AWWA C901
3/4" - 3" SDR 9

* The trade designation "Endot" may or may not be followed by any of the following
  designations:
  ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM, GOLDEN JET,
  SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY, ENDOT/YARDLEY,
  ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Greeneville, TN

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 4710
 
ENDOT
 
AWWA C901
3/4" - 3" SDR 9

* The trade designation "Endot" may or may not be followed by any of the following
  designations:
  ENDOPLUS, ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM,
  GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY,
  ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Flying W Plastics Inc. 
487 Vanhorn Drive
P.O. Box 759 
Glenville, WV 26351 
United States 
304-462-5779
Visit this company's website

Facility : Jacksonville, FL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+
 
PE 4710
 
FLYING "W" SPEC I
 
AWWA C901
3/4" - 3" DR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+
 
PE 4710
 
FLYING "W" TITAN BLUE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Facility : Glenville, WV

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+
 
PE 4710
 
FLYING "W" SPEC I
 
AWWA C901
3/4" - 3" DR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+
 
PE 4710
 
FLYING "W" TITAN BLUE CTS
 
AWWA C901
3/4" - 2" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Georg Fischer Central Plastics LLC 
4949 Joseph Hardin Drive
Dallas, TX 75236 
United States 
469-801-2246

Facility : Elizabethtown, KY

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [1] [G]
 
PE 4710
 
+GF+ DESIGN FLOW
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 7.3
3/4" - 3" SDR 9
3/4" - 3" SDR 11

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure that the
    product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Titusville, PA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing* +
 
PE 4710
 
+GF+ DESIGN FLOW
 
AWWA C901
3/4" - 2" CTS SDR 9

* Product tested and Certified for Cold 23°C (73°F) applications only.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Facility : Rapid City, SD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [1] [G]
 
PE 4710
 
+GF+ DESIGN FLOW
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 7.3
3/4" - 3" SDR 9
3/4" - 3" SDR 11

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure that the
    product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Cedar City, UT

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [1] [G]
 
PE 4710
 
+GF+ DESIGN FLOW
 
AWWA C901
3/4" - 3" SDR 7
3/4" - 3" SDR 7.3
3/4" - 3" SDR 9
3/4" - 3" SDR 11

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure that the
    product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Infra Pipe Solutions Ltd. 
6750 Century Avenue
Unit 303 
Mississauga, ON L5N 0B7 
Canada 
905-858-0206
Visit this company's website

Facility : Huntsville, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ +
 
PE 4710
 
Sclairpipe
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Facility : Saskatoon, Saskatchewan, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* +
 
PE 4710
 
Sclairpipe
 
AWWA C901
3/4" - 3" SDR 9

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ [G]
 
PE 4710
 
IPEX Inc
 
AWWA C901
3/4" - 3" SDR 9 (PC250)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are NSF Certified.


 
J-M Manufacturing Co., Inc. DBA JM Eagle 
9 Peach Tree Hill Road
Livingston, NJ 07039 
United States 
310-693-8200
Visit this company's website

Facility : # 1 Adel, GA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [2] [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
  and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements.  It is the responsibility of the end user to ensure that the
    product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 8 Kingman, AZ

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [2] [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
  and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements.  It is the responsibility of the end user to ensure that the
    product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 9 Magnolia, AR

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
  and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing+ ^ § [2] [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
  and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements.  It is the responsibility of the end user to ensure that the
    product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 11 Cochranton, PA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
  and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 15 Sunnyside, WA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 17 Tulsa, OK

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [G]
 
PE 4710
 
J-M Manufacturing
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
  and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.


 
Mexichem Soluciones Integrales S.A. de C.V. 
Río San Javier No.10,Fraccionamiento
Viveros del Río, Tlalnepantla 54060 
Mexico 
52 442 217 7970

Facility : Cuautitlán Izcalli, Mexico

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe++ [G]
 
PE 4710
 
Wavin PEAD MX-Chem 2480
 
AWWA C901
3/4" - 3" SDR 7, 9, 11, 13.5

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
Wavin PEAD MX-Chem 2490
 
AWWA C901
3/4" - 3" SDR 7, 9, 11, 13.5

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
Wavin PEAD MX-Chem 2492
 
AWWA C901
3/4" - 3" SDR 7, 9, 11, 13.5

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
Wavin PEAD MX-Chem 2502
 
AWWA C901
3/4" - 3" SDR 7, 9, 11, 13.5

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
Wavin PEAD MX-Chem E6210C
 
AWWA C901
3/4" - 3" SDR 7, 9, 11, 13.5

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Modern Polymer Pipe and Extrusions, LLC 
1655 Louisiana Street
Beaumont, TX 77701 
United States 
800-231-8198 
409-504-4654
Visit this company's website

Facility : Pasadena, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
HDPE 4710 Poly Pipe
 
AWWA C901
2" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Reclaimed Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PE 4710
 
HDPE 4710 Poly Pipe
 
AWWA C901
2" - 3" SDR 9



 
Performance Pipe 
A Div. of Chevron Phillips Chem Co., LP
8261 Belleview Drive 
Suite 110 
Plano, TX 75024 
United States 
972-599-6600
Visit this company's website

Facility : Hagerstown, MD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 4710
 
DriscoPlex PW
 
AWWA C901
1 1/4" - 3" SDR 9

* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Pipeline Plastics, LLC 
1301 Solana Boulevard
Suite 1440 
Westlake, TX 76262 
United States 
940-627-9100
Visit this company's website

Facility : Fair Bluff, NC

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + §
 
PE 4710
 
Pipeline Plastics
 
AWWA C901
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11

* Special sizes may be acceptable for engineered applications, due to system conditions or
  special local requirements.  It is the responsibility of the end user to ensure that the
  product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Belle Fourche, SD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + §
 
PE 4710
 
Pipeline Plastics
 
AWWA C901
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11

* Special sizes may be acceptable for engineered applications, due to system conditions or
  special local requirements. It is the responsibility of the end user to ensure that the
  product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Decatur, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + §
 
PE 4710
 
Pipeline Plastics
 
AWWA C901
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11

* Special sizes may be acceptable for engineered applications, due to system conditions or
  special local requirements. It is the responsibility of the end user to ensure that the
  product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Levelland, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + §
 
PE 4710
 
Pipeline Plastics
 
AWWA C901
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11

* Special sizes may be acceptable for engineered applications, due to system conditions or
  special local requirements. It is the responsibility of the end user to ensure that the
  product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Poly Technology (Polytech) 
(A Granse Company)
Airlake Industrial Park 
21670 Hamburg Avenue 
Lakeville, MN 55044 
United States 
612-469-2198

Facility : Lakeville, MN

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [1] [G]
 
PE 4710
 
PolyTech
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest or
    WSLP Fusion.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Tubing+ [1] [G]
 
PE 4710
 
PolyTech
 
AWWA C901
3/4" - 2" CTS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest or
    WSLP Fusion.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

$ This product also meets the requirements for PE 3408 pipe tested in accordance with ASTM
  3350-02a.

Geothermal Applications

Product Type   Material Type   Trade Name   Product Standard

Pipe[1]
 
PE 4710
 
PolyTech
 
AWWA C901
3/4" - 3" SDR 9
3/4" - 2" CTS SDR 9 Tubing

[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest,
    WSLP Fusion or Excel Fusion.



 
Polytubes 2009 Inc. 
16221 - 123 Avenue
Edmonton, AB T5V 1N9 
Canada 
780-453-2211
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ ++
 
PE 4710
 
PT BLUE47
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 4710
 
PT D447
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 4710
 
PT-I47
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).


Facility : Peterborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ ++
 
PE 4710
 
PT BLUE47
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 4710
 
PT D447
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 4710
 
PT-I47
 
AWWA C901
3/4" - 3" SDR 9

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

[1] These pipe sizes are not certified for use in potable water applications containing
    oxidizing disinfectants and shall not be marked with a CC oxidative resistance
    classification.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure the
    product is suitable for the intended application.


 
Teel Plastics Inc. 
1060 Teel Court
Baraboo, WI 53913 
United States 
608-355-3080
Visit this company's website

Facility : Baraboo, WI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+
 
PE 4710
 
Teel Plastics PE4710 Pressure Pipe
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
Trinus Pipes & Tubes Ltd. 
699 Welham Road
Barrie, ON L4N 6C5 
Canada 
705-721-0216

Facility : Barrie, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ~ [G]
 
PE 4710
 
Trinus Pipes & Tubes Ltd.
 
AWWA C901
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
~ This product may be marked with an alternate tradename: Tridrop.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Versaprofiles Product Inc. 
154 Principale Street
Saint-Lazare de Bellechasse, QC G0R 3J0 
Canada 
877-335-7473 
418-883-2036

Facility : Saint-Lazare de Bellechasse, Québec, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing+ §
 
PE 4710
 
Versapipe HD100PW
 
AWWA C901
3/4" - 3" SIDR 9
3/4" - 3" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
WL Plastics Corporation 
3575 Lone Star Circle
Suite 300 
Fort Worth, TX 76177 
United States 
682-831-2727
Visit this company's website

Facility : Elizabethtown, KY

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [1] [G]
 
PE 4710
 
WL Plastics KY / WLP KY
 
AWWA C901
3/4" - 3" IPS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
    oxidizing disinfectants and shall not be marked with a CC oxidative resistance
    classification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Titusville, PA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+
 
PE 4710
 
WL Plastics PA/WLP PA
 
AWWA C901
3/4" - 3" IPS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+
 
PE 4710
 
WL Plastics PA/WLP PA Blue
 
AWWA C901
3/4" - 3" IPS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Facility : Rapid City, SD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
WL Plastics SD / WLP SD
 
AWWA C901
3/4" - 3" IPS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Cedar City, UT

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
WL Plastics UT / WLP UT
 
AWWA C901
3/4" - 3" IPS SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems



 
Centennial Plastics, Inc. 
1830 Centennial Avenue
P.O. Box 329 
Hastings, NE 68901 
United States 
866-851-2227 
402-462-2227
Visit this company's website

Facility : Nampa, ID

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe%
 
PE 3608/4710
 
CenFuse
 
AWWA C901
3/4" - 2" SDR 7
3/4" - 2" SDR 9
3/4" - 2" SDR 11

% Certified product may include a U-bend fitting.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      Documentation shipped with the product are Certified.
      

Facility : Hastings, NE

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe%
 
PE 3608/4710
 
CenFuse
 
AWWA C901
3/4" - 2" SDR 7
3/4" - 2" SDR 9
3/4" - 2" SDR 11

% Certified product may include a U-bend fitting.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Poly Technology (Polytech) 
(A Granse Company)
Airlake Industrial Park 
21670 Hamburg Avenue 
Lakeville, MN 55044 
United States 
612-469-2198

Facility : Lakeville, MN

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe% [1]
 
PE 3608/4710
 
PolyTech
 
AWWA C901
3/4" - 2" SDR 9
3/4" - 2" SDR 9

% Certified product does not include a U-Bend Fitting.
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest,
    WSLP Fusion or Excel Fusion.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Number of matching Manufacturers is 22
Number of matching Products is 151
Processing time was 1 seconds