NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, August 24, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=AWWA+C906&


NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
Advantage Earth Products, Inc. 
1625 Jessie Street
Jacksonville, FL 32206 
United States 
904-329-1430
Visit this company's website

Facility : Jacksonville, FL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe++ [G]
 
PE 4710
 
AEP ELETRO-O-FUSE UI
 
AWWA C906
4" - 18" DR 7
4" - 18" DR 7.3
4" - 18" DR 9
4" - 18" DR 9.3
4" - 18" DR 11
4" - 18" DR 13.5
4" - 18" DR 15.5
4" - 18" DR 17
4" - 18" DR 19
4" - 18" DR 21
4" - 18" DR 26
4" - 18" DR 32.5

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
ELECTR-O-FUZE ALA
 
AWWA C906
4" - 18" DR 7
4" - 18" DR 7.3
4" - 18" DR 9
4" - 18" DR 9.3
4" - 18" DR 11
4" - 18" DR 32.5
4" - 18" DR 15.5
4" - 18" DR 17
4" - 18" DR 19
4" - 18" DR 21
4" - 18" DR 26
4" - 18" DR 13.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.


 
Centennial Plastics, Inc. 
1830 Centennial Avenue
P.O. Box 329 
Hastings, NE 68901 
United States 
866-851-2227 
402-462-2227
Visit this company's website

Facility : Hastings, NE

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608/PE 4710
 
CenFuse
 
AWWA C906
4", 6", 8", 10", 12" SDR 7
4", 6", 8", 10", 12" SDR 7.3
4", 6", 8", 10", 12" SDR 9
4", 6", 8", 10", 12" SDR 9.3
4", 6", 8", 10", 12" SDR 11
4", 6", 8", 10", 12" SDR 13.5
4", 6", 8", 10", 12" SDR 15.5
4", 6", 8", 10", 12" SDR 17
4", 6", 8", 10", 12" SDR 21
4", 6", 8", 10", 12" SDR 26
4", 6", 8", 10", 12" SDR 32.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Geothermal Applications

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PE 3608/PE 4710
 
CenFuse
 
AWWA C906
4", 6", 8", 10", 12" SDR 7
4", 6", 8", 10", 12" SDR 7.3
4", 6", 8", 10", 12" SDR 9
4", 6", 8", 10", 12" SDR 9.3
4", 6", 8", 10", 12" SDR 11
4", 6", 8", 10", 12" SDR 13.5
4", 6", 8", 10", 12" SDR 15.5
4", 6", 8", 10", 12" SDR 17
4", 6", 8", 10", 12" SDR 21
4", 6", 8", 10", 12" SDR 26
4", 6", 8", 10", 12" SDR 32.5

Pipe
 
PE 3608/PE 4710
 
CenFuse Geothermal
 
AWWA C906
4", 6", 8", 10", 12" SDR 7
4", 6", 8", 10", 12" SDR 7.3
4", 6", 8", 10", 12" SDR 9
4", 6", 8", 10", 12" SDR 9.3
4", 6", 8", 10", 12" SDR 11
4", 6", 8", 10", 12" SDR 13.5
4", 6", 8", 10", 12" SDR 15.5
4", 6", 8", 10", 12" SDR 17
4", 6", 8", 10", 12" SDR 21
4", 6", 8", 10", 12" SDR 26
4", 6", 8", 10", 12" SDR 32.5

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
CRP Products & Mfg. Ltd 
3001 84 Avenue
Edmonton, AB T6P 1K1 
Canada 
800-661-4054 
780-449-1599
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Molded Butt Fittings+ §
 
PE 100/4710
 
CRP-PE 100/4710
 
AWWA C906

Molded Butt 45° Elbow
4" - 12"  

Molded Butt 90° Elbow
4" - 12"  

Molded Butt Cap
4" - 12"  

Molded Butt Flange Adapter
4" - 54"  

Molded Butt Reducer
4" x 2" - 12" x 10"  

Molded Butt Stub End
14" - 54"  

Molded Butt Tee
4" - 12"  

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.



 
Flying "W" Plastics Company 
52 Van Horn Drive
P.O. Box 759 
Glenville, WV 26351 
United States 
304-462-5779
Visit this company's website

Facility : Glenville, WV

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+
 
PE 4710
 
FLYING "W" SPEC II
 
AWWA C906
4" - 18" DR 7.3
4" - 18" DR 9
4" - 18" DR 9.3
4" - 18" DR 11
4" - 18" DR 13.5
4" - 18" DR 15.5
4" - 18" DR 17
4" - 18" DR 21
4" - 18" DR 26
4" - 18" DR 32.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
Hebei Quan’en High-Tech Piping Co., Ltd. 
North of Longhu Avenue, East of Longtai
Road, Emerging Industries Demonstration 
Zone, Langfang, Hebei, 065000 
China 
86 316 5211234*8062

Facility : Hebei, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
JM PE
 
AWWA C906
4" - 65" SDR 17
4" - 65" SDR 7
4" - 65" SDR 7.3
4" - 65" SDR 9.3
4" - 65" SDR 11
4" - 65" SDR 15.5
4" - 65" SDR 19
4" - 65" SDR 21
4" - 65" SDR 26
4" - 65" SDR 32.5
4" - 65" SDR 13.5
4" - 65" SDR 9

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Infra Pipe Solutions Ltd. 
6507 Mississauga Road
Mississauga, ON L5N 1A6 
Canada 
905-858-0206
Visit this company's website

Facility : Huntsville, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ +
 
PE 3408/PE 3608
 
Sclairpipe
 
AWWA C906
4" - 63" SDR 7
4" - 63" SDR 7.3
4" - 63" SDR 9
4" - 63" SDR 9.3
4" - 63" SDR 11
4" - 63" SDR 13.5
4" - 63" SDR 14.5
4" - 63" SDR 15.5
4" - 63" SDR 17
4" - 63" SDR 21
4" - 63" SDR 26
4" - 63" SDR 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe$ +
 
PE 3408/PE 4710
 
Sclairpipe
 
AWWA C906
4" - 63" SDR 7
4" - 63" SDR 7.3
4" - 63" SDR 9
4" - 63" SDR 9.3
4" - 63" SDR 11
4" - 63" SDR 13.5
4" - 63" SDR 14.5
4" - 63" SDR 15.5
4" - 63" SDR 17
4" - 63" SDR 21
4" - 63" SDR 26
4" - 63" SDR 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.


Facility : Saskatoon, Saskatchewan, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* +
 
PE 3408 / PE 3608
 
Sclairpipe
 
AWWA C906
4" - 63" SDR 7
4" - 63" SDR 7.3
4" - 63" SDR 9
4" - 63" SDR 9.3
4" - 63" SDR 11
4" - 63" SDR 13.5
4" - 63" SDR 14.5
4" - 63" SDR 15.5
4" - 63" SDR 17
4" - 63" SDR 21
4" - 63" SDR 26
4" - 63" SDR 32.5

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +
 
PE 3408 / PE 4710
 
Sclairpipe
 
AWWA C906
4" - 63" SDR 7
4" - 63" SDR 7.3
4" - 63" SDR 9
4" - 63" SDR 9.3
4" - 63" SDR 11
4" - 63" SDR 13.5
4" - 63" SDR 14.5
4" - 63" SDR 15.5
4" - 63" SDR 17
4" - 63" SDR 21
4" - 63" SDR 26
4" - 63" SDR 32.5

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ [G]
 
HDPE 3608
 
IPEX Inc
 
AWWA C906
4" - 12" DR 7 (PC335)
4" - 12" DR 7.3 (PC315)
4" - 12" DR 9 (PC250)
4" - 12" DR 11 (PC200)
4" - 12" DR 13.5 (PC160)
4" - 12" DR 15.5 (PC140)
4" - 12" DR 17 (PC125)
4" - 12" DR 21 (PC100)

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are NSF Certified.


 
J-M Manufacturing Co., Inc. 
9 Peach Tree Hill Road
Livingston, NJ 07039 
United States 
310-693-8200
Visit this company's website

Facility : # 1 Adel, GA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ [G]
 
PE 3608, PE 4710
 
J-M Manufacturing
 
AWWA C906
4" - 65"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 8 Kingman, AZ

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [G]
 
PE 3608, PE 4710
 
J-M Manufacturing
 
AWWA C906
4" - 65"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 9 Magnolia, AR

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing+ ^ § [G]
 
PE 3608, PE 4710
 
J-M Manufacturing
 
AWWA C906
4" - 65"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 11 Cochranton, PA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ + ^ § [G]
 
PE 3608, PE 4710
 
J-M Manufacturing
 
AWWA C906
4" - 65"

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 15 Sunnyside, WA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe# $ + § [G]
 
PE 3608, PE 4710
 
J-M Manufacturing
 
AWWA C906
4" - 65"

# This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : # 17 Tulsa, OK

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ ^ § [G]
 
PE 3608, PE 4710
 
J-M Manufacturing
 
AWWA C906
4" - 65"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name:  JM Eagle, [JM Eagle Logo],
  [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle
  Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.


 
Mexichem Soluciones Integrales S.A. de C.V. 
Río San Javier No.10,Fraccionamiento
Viveros del Río, Tlalnepantla 54060 
México 
52 442 217 7970

Facility : Queretaro, México

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 4710
 
Dura Line MX-Chem A6210
 
AWWA C906
3/4" - 24"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Performance Pipe 
A Div. of Chevron Phillips Chem Co., LP
5085 West Park Boulevard 
Suite 500 
Plano, TX 75093 
United States 
972-599-6600
Visit this company's website

Facility : Hagerstown, MD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ * + [G]
 
PE 3408/PE 4710
 
DriscoPlex PW
 
AWWA C906
4" - 63" DR 7.3
4" - 63" DR 9
4" - 63" DR 9.3
4" - 63" DR 11
4" - 63" DR 13.5
4" - 63" DR 15.5
4" - 63" DR 17
4" - 63" DR 21
4" - 63" DR 26
4" - 63" DR 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Pipeline Plastics, LLC 
1301 Solana Boulevard
Suite 1440 
Westlake, TX 76262 
United States 
940-627-9100
Visit this company's website

Facility : Belle Fourche, SD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ §
 
PE 4710
 
Pipeline Plastics
 
AWWA C906

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Decatur, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ §
 
PE 4710
 
Pipeline Plastics
 
AWWA C906
4" - 63"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Levelland, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ §
 
PE 4710
 
Pipeline Plastics
 
AWWA C906
4" - 63"

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Polytubes 2009 Inc. 
16221 - 123 Avenue
Edmonton, AB T5V 1N9 
Canada 
780-453-2211
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ ++
 
PE 3408/PE 4710
 
PT D47
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 4710
 
PT D247
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 4710
 
PT D347
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/3608
 
PT-I36
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/4710
 
PT-I36
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 3608
 
PT-I38
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 4710
 
PT-I47
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).


Facility : Peterborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe$ ++
 
PE 3408/PE 4710
 
PT D47
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 4710
 
PT D247
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 4710
 
PT D347
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/3608
 
PT-I36
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/4710
 
PT-I36
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 3608
 
PT-I38
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Pipe$ ++
 
PE 3408/PE 4710
 
PT-I47
 
AWWA C906
4" - 42" SDR 7, 7.3, 9, 9.3, 11, 13.5, 15.5, 17, 21, 26, 32.5

$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).



 
ShawCor - Composite Production Systems 
3052 - 84 Avenue
Edmonton, AB T6P 1K3 
Canada 
780-400-2282
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+
 
PE 3608,4608,4710
 
Global Pipe
 
AWWA C906
4" - 24" SDR 7
4" - 24" SDR 7.3
4" - 24" SDR 9
4" - 24" SDR 9.3
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 15.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26
4" - 24" SDR 32.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe+
 
PE 3608,4608,4710
 
Shawcor
 
AWWA C906
4" - 24" SDR 7
4" - 24" SDR 7.3
4" - 24" SDR 9
4" - 24" SDR 9.3
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 15.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26
4" - 24" SDR 32.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
Teel Plastics Inc. 
1060 Teel Court
Baraboo, WI 53913 
United States 
608-355-3080
Visit this company's website

Facility : Baraboo, WI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* +
 
PE 3408/PE 3608
 
Teel Plastics PE3608
 
AWWA C906
4" - 8" SDR 9
4" - 8" SDR 11
4" - 8" SDR 15.5

* Product tested and Certified for Cold 23° C (73° F) applications only.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Pipe* +
 
PE 3408/PE 4710
 
Teel Plastics PE4710 Pressure Pipe
 
AWWA C906
4" - 8" SDR 9
4" - 8" SDR 11
4" - 8" SDR 15.5

* Product tested and Certified for Cold 23° C (73° F) applications only.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
Versaprofiles Product Inc. 
154 Principale Street
Saint-Lazare de Bellechasse, QC G0R 3J0 
Canada 
877-335-7473 
418-883-2036

Facility : Saint-Lazare de Bellechasse, Québec, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Tubing+
 
PE 4710
 
Versapipe HD100PW
 
AWWA C906
4" - 10" SDR 7.3
4" - 10" SDR 9
4" - 10" SDR 9.3
4" - 10" SDR 11
4" - 10" SDR 13.5
4" - 10" SDR 15.5
4" - 10" SDR 17
4" - 10" SDR 21
4" - 10" SDR 26
4" - 10" SDR 32.5

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.



 
WL Plastics Corporation 
3575 Lone Star Circle
Suite 300 
Fort Worth, TX 76177 
United States 
682-831-2727

Facility : Elizabethtown, KY

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 3408/PE 4710
 
WL Plastics KY / WLP KY
 
AWWA C906
4" - 24" DR 7
4" - 21 1/2" DR 7.3
4" - 26" DR 9
4" - 26" DR 9.3
4" - 32" DR 11
4" - 32" DR 13.5
4" - 32" DR 15.5
4" - 32" DR 17
4" - 32" DR 21
4" - 32" DR 26
4" - 32" DR 32.5

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Rapid City, SD

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 3408/PE 4710
 
WL Plastics SD / WLP SD
 
AWWA C906
4" - 24" DR 7
4" - 36" DR 7.3
4" - 36" DR 9
4" - 36" DR 9.3
4" - 36" DR 11
4" - 36" DR 15.5
4" - 36" DR 17
4" - 36" DR 21
4" - 36" DR 13.5
4" - 36" DR 26
4" - 36" DR 32.5

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Cedar City, UT

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe* + [G]
 
PE 3408/PE 4710
 
WL Plastics UT / WLP UT
 
AWWA C906
4" - 24" DR 7
4" - 24" DR 7.3
4" - 36" DR 9
4" - 36" DR 9.3
4" - 36" DR 11
4" - 42" DR 13.5
4" - 48" DR 15.5
4" - 54" DR 17
4" - 54" DR 21
4" - 54" DR 26
4" - 54" DR 32.5

* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems



 
Centennial Plastics, Inc. 
1830 Centennial Avenue
P.O. Box 329 
Hastings, NE 68901 
United States 
866-851-2227 
402-462-2227
Visit this company's website

Facility : Hastings, NE

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe%
 
PE 3608/PE 4710
 
CenFuse
 
AWWA C906
4", 6", 8", 10", 12" SDR 7
4", 6", 8", 10", 12" SDR 7.3
4", 6", 8", 10", 12" SDR 9
4", 6", 8", 10", 12" SDR 9.3
4", 6", 8", 10", 12" SDR 11
4", 6", 8", 10", 12" SDR 13.5
4", 6", 8", 10", 12" SDR 15.5
4", 6", 8", 10", 12" SDR 17
4", 6", 8", 10", 12" SDR 21
4", 6", 8", 10", 12" SDR 26
4", 6", 8", 10", 12" SDR 32.5

% Certified product may include a U-bend fitting.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Number of matching Manufacturers is 17
Number of matching Products is 258
Processing time was 0 seconds