NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, May 23, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?


NSF/ANSI 14
Plastics Piping System Components and Related Materials


Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document



 
A. Schulman, Inc. 
1183 Home Avenue
Akron, OH 44310 
United States 
800-873-7527 
812-253-5191
Visit this company's website

Facility : Evansville, IN

Special Compounders - Potable Water

Material Type End Use Trade Name Product Standard
RPP+++ [1] 2, 4 Aqualoy® 125B A33350 ASTM D4101
RPP+++ [1] 2, 4 Aqualoy® 125G A33350 ASTM D4101
RPP+++ [1] 2, 4 Aqualoy® 125N A33350 ASTM D4101
RPP+++ [1] 2, 4 Aqualoy® 125W A33350 ASTM D4101
RPP+++ [1] 2, 4 Aqualoy® 125W14 A33350 ASTM D4101
RPP+++ [2] 2, 4 Aqualoy® 140B A33350 ASTM D4101
RPP+++ [2] 2, 4 Aqualoy® 140N A33350 ASTM D4101
RPP+++ [3] 2, 4 Aqualoy® 140W A33350 ASTM D4101
RPP+++ [1] 2, 4 E-10026B A33350 ASTM D4101

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] PP0105 G20
[2] PP0105 G30
[3] PP0105 R30


Facility : Akron, OH

Special Compounders - Potable Water

Material Type End Use Trade Name Product Standard
NP-6, 6+++ [1] 2, 4 Aqualoy® 645N G35A33280 ASTM D4066

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] PA0120 G35


Facility : Guelph, Ontario, Canada

Special Compounders - Potable Water

Material Type End Use Trade Name Product Standard

Potable Water Materials
PP@ +++ [1] 2, 4 J-60/**/E/NS BK223 A39950 ASTM D4101
PP@ +++ [1] 2, 4 J-60/**/E/NS NATL A39950 ASTM D4101

@ **  - Indicates percent glass reinforced.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for a maximum surface area to volume ratio of 250 sq. in./L.


Facility : Guangdong, China

Special Compounders - Potable Water

Material Type End Use Trade Name Product Standard
RPP+++ [1] 2, 4 Aqualoy® 125B A33350 ASTM D4101
RPP+++ [1] 2, 4 Aqualoy® 125N A33350 ASTM D4101
RPP+++ [1] 2, 4 Aqualoy® 125W A33350 ASTM D4101
RPP+++ [2] 2, 4 Aqualoy® 140N A33350 ASTM D4101
RPP+++ [3] 2, 4 Aqualoy® 140W A33350 ASTM D4101

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] PP0105 G20
[2] PP0105 G30
[3] PP0105 R30



 
A.Y. McDonald Mfg. Co. 
4800 Chavenelle Road
Dubuque, IA 52002 
United States 
563-583-7311

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings% +
 
PVC
 
AY McDonald
 
ASTM F1970

PVC Unions, Model No. 2070T/S
1/2" - 4"  

% PVC Unions 1/2" - 4" rated at 150 PSI and 73°F.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Valves# +++
 
CPVC
 
AY McDonald
 
ASTM F1970

CTS BALL VALVE, Model No. 2062
1/2" - 1"  

# CPVC CTS Ball Valves rated at 100 PSI and 180°F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Valves+ @
 
PVC
 
AY McDonald
 
ASTM F1970

COMPACT BALL VALVE, Model No. 2060T/S
1/2" - 4"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ Compact Ball Valves 1/2" - 2" rated at 150 PSI and 73°F and 2 1/2" - 4" rated at 100 PSI
  and 73°F.

Valves+ @
 
PVC
 
AY McDonald
 
ASTM F1970

TRUE UNION BALL VALVE, Model No. 2064ST
1/2" - 4"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ Compact Ball Valves 1/2" - 2" rated at 150 PSI and 73°F and 2 1/2" - 4" rated at 100 PSI
  and 73°F.



 
ABRO Industries, Inc. 
3580 Blackthorn Court
South Bend, IN 46628 
United States 
574-232-8289

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement (1,2)+++ [G] CPVC PW, DWV, SW ABRO CPVC Heavy Body Cement ASTM F493
Solvent Cement (1,2)+++ [G] CPVC PW, DWV, SW ABRO CPVC Orange Cement Z14 Regular Body ASTM F493
Solvent Cement (1,2)+++ [G] CPVC PW, DWV, SW ABRO CPVC Regular Body Cement ASTM F493
Solvent Cement (1,2)+ [G] PVC PW, DWV, SW ABRO PVC Clear Cement ASTM D2564
Solvent Cement (1,2)+ [G] PVC PW, DWV, SW ABRO PVC Heavy Duty Clear Cement ASTM D2564
Solvent Cement (1,2)+ [G] PVC PW, DWV, SW ABRO PVC Heavy Duty Gray Cement ASTM D2564
Solvent Cement (1,2)+ [G] PVC PW, DWV, SW ABRO PVC Medium Duty Clear Cement ASTM D2564
Solvent Cement (1,2)[G] PVC PW, DWV, SW PVC 700-21 Medium Duty Clear Cement ASTM D2564
Solvent Cement (1,2)+ [G] PVC PW, DWV, SW PVC 717-21 Heavy Duty Clear Cement ASTM D2564
Primer (2)+++ [G] PVC/CPVC PW, DWV, SW ABRO Purple Primer ASTM F656

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

(1) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and ABRO Purple Primer.
(2) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.


 
Advanced Drainage Systems, Inc. 
4640 Trueman Boulevard
Hilliard, OH 43026 
United States 
800-733-7473 
614-658-0050
Visit this company's website

Facility : Bakersfield, CA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D3035
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26
1/2" - 2" DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Buford, GA

Sewer Main - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings
 
PVC
 
Nyloplast
 
CSA B182.2

Tee with Gasketed Swr Bell¢
1261AG - 12" X 4" (300 mm X 100 mm)   1262AG - 12" X 6" (300 mm X 150 mm)   1263AG - 12" X 8" (300 mm X 200 mm)   1264AG - 12" X 10" (300 mm X 250 mm)  
1561AG - 15" X 4" (375 mm X 100 mm)   1562AG - 15" X 6" (375 mm X 150 mm)   1563AG - 15" X 8" (375 mm X 200 mm)   1564AG - 15" X 10" (375 mm X 250 mm)  
1861AG - 18" X 4" (450 mm X 100 mm)   1862AG - 18" X 6" (450 mm X 150 mm)   1863AG - 18" X 8" (450 mm X 200 mm)   1864AG - 18" X 10" (450 mm X 250 mm)  
2161AG - 21" X 4" (530 mm X 100 mm)   2162AG - 21" X 6" (530 mm X 150 mm)   2163AG - 21" X 8" (530 mm X 200 mm)   2164AG - 21" X 10" (530 mm X 250 mm)  
2461AG - 24" X 4" (600 mm X 100 mm)   2462AG - 24" X 6" (600 mm X 150 mm)   2463AG - 24" X 8" (600 mm X 200 mm)   2464AG - 24" X 10" (600 mm X 250 mm)  
3061AG - 30" X 4" (810 mm X 100 mm)   3062AG - 30" X 6" (810 mm X 150 mm)   3063AG - 30" X 8" (810 mm X 200 mm)   3064AG - 30" X 10" (810 mm X 250 mm)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Vicksburg, MS

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D3035
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26
1/2" - 2" DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Harrisonville, MO

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D3035
1/2" - 2" DR 32.5
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Waverly, NY

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D3035
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26
1/2" - 2" DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Findlay, OH

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 7.3
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D3035
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26
1/2" - 2" DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Ennis, TX

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM 3035
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26
1/2" - 2" DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Washougal, WA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 3608, PE 4710
 
ADS PolyFlex
 
ASTM D3035
1/2" - 2" DR 7
1/2" - 2" DR 9
1/2" - 2" DR 11
1/2" - 2" DR 13.5
1/2" - 2" DR 15.5
1/2" - 2" DR 17
1/2" - 2" DR 21
1/2" - 2" DR 26
1/2" - 2" DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Advantage Earth Products, Inc. 
1625 Jessie Street
Jacksonville, FL 32206 
United States 
904-329-1430
Visit this company's website

Facility : Jacksonville, FL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe++ [G]
 
PE 4710
 
AEP ELETRO-O-FUSE UI
 
ASTM D3035
1 1/4" - 18" IPS DR 7
1 1/4" - 18" IPS DR 9
1 1/4" - 18" IPS DR 11
1 1/4" - 18" IPS DR 13.5
1 1/4" - 18" IPS DR 15.5
1 1/4" - 18" IPS DR 17
1 1/4" - 18" IPS DR 21
1 1/4" - 18" IPS DR 26
1 1/2" - 18" IPS DR 32.5
3" - 18" DIPS DR 7.7
3" - 18" DIPS DR 9
3" - 18" DIPS DR 11
3" - 18" DIPS DR 14.3
3" - 18" DIPS DR 21

++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
AEP ELETRO-O-FUSE UI
 
ASTM F714
3" - 18" DIPS DR 6.7
3" - 18" DIPS DR 7.7
3" - 18" DIPS DR 9
3" - 18" DIPS DR 11
3" - 18" DIPS DR 14.3
3" - 18" DIPS DR 21
3" - 18" IPS DR 7.3
3" - 18" IPS DR 8.3
3" - 18" IPS DR 9
3" - 18" IPS DR 9.3
3" - 18" IPS DR 11
3" - 18" IPS DR 13.5
3" - 18" IPS DR 15.5
3" - 18" IPS DR 17
3" - 18" IPS DR 21
3" - 18" IPS DR 26
3" - 18" IPS DR 32.5
90 mm - 450 mm ISO DR 11
90 mm - 450 mm ISO DR 17
90 mm - 450 mm ISO DR 21
90 mm - 450 mm ISO DR 26
110 mm - 450 mm ISO DR 32.5

++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
AEP ELETRO-O-FUSE UI
 
AWWA C906
4" - 18" DR 7
4" - 18" DR 7.3
4" - 18" DR 9
4" - 18" DR 9.3
4" - 18" DR 11
4" - 18" DR 13.5
4" - 18" DR 15.5
4" - 18" DR 17
4" - 18" DR 19
4" - 18" DR 21
4" - 18" DR 26
4" - 18" DR 32.5

++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe++ [G]
 
PE 4710
 
AEP ELETRO-O-FUSE UI
 
SE 12857
32 mm - 450 mm DR 7.4
32 mm - 450 mm DR 9
32 mm - 450 mm DR 11
32 mm - 450 mm DR 13.6
32 mm - 450 mm DR 17
32 mm - 450 mm DR 21
32 mm - 450 mm DR 26
32 mm - 450 mm DR 33

++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
ELECTR-O-FUZE ALA
 
ASTM D3035
1 1/4" - 18" IPS DR 7
1 1/4" - 18" IPS DR 9
1 1/4" - 18" IPS DR 11
1 1/4" - 18" IPS DR 13.5
1 1/4" - 18" IPS DR 15.5
1 1/4" - 18" IPS DR 17
1 1/4" - 18" IPS DR 21
1 1/4" - 18" IPS DR 26
1 1/2" - 18" IPS DR 32.5
3" - 18" DIPS DR 7.7
3" - 18" DIPS DR 9
3" - 18" DIPS DR 11
3" - 18" DIPS DR 14.3
3" - 18" DIPS DR 21

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
ELECTR-O-FUZE ALA
 
ASTM F714
3" - 18" DIPS DR 6.7
3" - 18" DIPS DR 7.7
3" - 18" DIPS DR 9
3" - 18" DIPS DR 11
3" - 18" DIPS DR 14.3
3" - 18" DIPS DR 21
3" - 18" IPS DR 7.3
3" - 18" IPS DR 8.3
3" - 18" IPS DR 9
3" - 18" IPS DR 9.3
3" - 18" IPS DR 11
3" - 18" IPS DR 13.5
3" - 18" IPS DR 15.5
3" - 18" IPS DR 17
3" - 18" IPS DR 21
3" - 18" IPS DR 26
3" - 18" IPS DR 32.5
90 mm - 450 mm ISO DR 11
90 mm - 450 mm ISO DR 17
90 mm - 450 mm ISO DR 21
90 mm - 450 mm ISO DR 26
110 mm - 450 mm ISO DR 32.5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
ELECTR-O-FUZE ALA
 
AWWA C906
4" - 18" DR 15.5
4" - 18" DR 32.5
4" - 18" DR 26
4" - 18" DR 21
4" - 18" DR 19
4" - 18" DR 17
4" - 18" DR 9
4" - 18" DR 13.5
4" - 18" DR 7
4" - 18" DR 7.3
4" - 18" DR 9.3
4" - 18" DR 11

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [G]
 
PE 4710
 
ELECTR-O-FUZE ALA
 
SE 12857
32 mm - 450mm DR 7.4
32 mm - 450mm DR 9
32 mm - 450mm DR 11
32 mm - 450mm DR 13.6
32 mm - 450mm DR 17
32 mm - 450mm DR 21
32 mm - 450mm DR 26
32 mm - 450mm DR 33

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark are Certified.

Industrial Applications

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PE 4710
 
AEP ELETRO-O-FUSE UI
 
ASTM F2619
1 1/4" - 18" DR 7
1 1/4" - 18" DR 7.3
1 1/4" - 18" DR 9
1 1/4" - 18" DR 11
1 1/4" - 18" DR 13.5
2" - 18" DR 17
2 1/2" - 18" DR 21
4" - 18" DR 26
4" - 18" DR 32.5

Pipe
 
PE 4710
 
ELECTR-O-FUZE ALA
 
ASTM F2619
1 1/4" - 18" DR 7
1 1/4" - 18" DR 7.3
1 1/4" - 18" DR 9
1 1/4" - 18" DR 11
1 1/4" - 18" DR 13.5
2" - 18" DR 17
2 1/2" - 18" DR 26
4" - 18" DR 32.5

NOTE: Only products bearing the NSF Mark are Certified.


 
AGM (Arabian Gulf Manufacturers Ltd. Company for Plastic and Rubber Industry) 
P.O. Box 2143
Industrial City, Phase 5 
Jeddah 21451 
Saudi Arabia 
866 2 6377944

Facility : # 24 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement (1,2)+ PVC PW, DWV AGM 905 Clear Regular Bodied Fast Set PVC Cement ASTM D2564
Solvent Cement (1,2)++ CPVC PW, DWV AGM 914 Orange Heavy Bodied Medium Set CPVC Cement ASTM F493
Solvent Cement (1,2)+ PVC PW, DWV AGM 917 Gray Heavy Bodied Medium Set PVC Cement ASTM D2564
Primer(2)+++ PVC/CPVC PW, DWV AGM Primer Clear ASTM F656

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

(1) The compliance of this product with the health effects requirements of NSF/ANSI 61 was
    determined based on the testing of pipe and fittings assembled using the cement and AGM
    Primer Clear.
(2) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.


 
Ajay Industrial Corporation Ltd. 
B II/29, Mohan Cooperative Industrial
Estate, Badarpur Border, Badarpur 
New Delhi 110044 
India 
91 116 5484046
Visit this company's website

Facility : # 2 India

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+++
 
CPVC
 
Ajay
 
ASTM D2846

1/2" - 2" SDR 11
1/2" CPVC Cross Tee   1/2" CPVC CTS End Cap   1/2" CPVC Elbow 45°   1/2" CPVC Elbow 90°  
1/2" CPVC Socket   1/2" CPVC Tee   1/2" Transition Bush   3/4" CPOVC Cross Tee  
3/4" CPVC CTS End Cap   3/4" CPVC Elbow 45°   3/4" CPVC Elbow 90°   3/4" CPVC Socket  
3/4" CPVC Tee   3/4" Transition Bush   3/4" x 1/2" CPVC Bush   3/4" x 1/2" CPVC Reducing Socket  
3/4" x 1/2" CTS CPVC R/Elbow   3/4" x 3/4" x 1/2" CPVC CTS REDUCING TEE   1" CPVC CTS End Cap   1" CPVC Elbow 45°  
1" CPVC Elbow 90°   1" CPVC Socket   1" CPVC Tee   1" Transition Bush  
1" x 1/2" CPVC Bush   1" x 1/2" CPVC Reducing Socket   1" x 1/2" CTS CPVC R/Elbow   1" x 3/4" CTS CPVC R/Elbow  
1" x 1" x 1/2" CPVC CTS Reducing Tee   1" x 1" x 3/4" CPVC CTS Reducing Tee   1" x 3/4" CPVC Bush   1" x 3/4" CPVC Reducing Socket  
1 1/4" CPVC CTS End Cap   1 1/4" CPVC Elbow 45°   1 1/4" CPVC Elbow 90°   1 1/4" CPVC Socket  
1 1/4" CPVC Tee   1 1/4" Transition Bush   1 1/4" x 1" CPVC Bush   1 1/4" x 1" CPVC Reducing Socket  
1 1/4" x 1/2" CPVC Bush   1 1/4" x 3/4" CPVC Bush   1 1/4" x 1 1/4" x 1/2" CPVC CTS Reducing Tee   1 1/4" x 1 1/4" x 3/4" CPVC CTS Reducing Tee  
1 1/4" x 1 1/4" x 1" CPVC CTS Reducing Tee   1 1/2" CPVC CTS End Cap   1 1/2" CPVC Elbow 45°   1 1/2" CPVC Elbow 90°  
1 1/2" CPVC Socket   1 1/2" CPVC Tee   1 1/2" Transition Bush   1 1/2" x 1" CPVC Bush  
1 1/2" x 1/2" CPVC Bush   1 1/2" x 3/4" CPVC Bush   2" CPVC CTS End Cap   2" CPVC Elbow 45°  
2" CPVC Elbow 90°   2" CPVC Socket   2" CPVC Tee   2" Tranisition Bush  
2" x 1/4" CPVC Bush   2" x 1/2" CPVC Bush   2" x 3/4" CPVC Bush   2" x 1" CPVC Bush  
2" x 1 1/2" CPVC Bush  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
CPVC
 
Ajay
 
ASTM F438
2 1/2" - 6" Sch 40

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
CPVC
 
Ajay
 
ASTM F439
2 1/2" - 6" Sch 80

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


Facility : Maharashtra, India

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++
 
CPVC
 
Ajay
 
ASTM D2846
1/2" - 2" SDR 11

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe+++
 
CPVC
 
Ajay
 
ASTM F441
2 1/2" - 6" Sch 40
2 1/2" - 6" Sch 80

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe+++
 
CPVC
 
Ajay

SE 17574
1/2" - 2" SDR 13.5

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


 
Al Munif Pipe 
Riyadh 2nd Industrial Area
P.O. Box 355342 
Riyadh 11382 
Saudi Arabia 
966 5 054 05762
Visit this company's website

Facility : Riyadh, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+ [1]
 
HDPE
 
MMP PE 100
 
DIN 8074/DIN 8075
10 mm - 1600 mm

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.



 
Al Waab Plastics Factory 
Street 47, Gate 4, East Industrial
P.O. Box 14918 
Doha 
Qatar 
974 446 55181
Visit this company's website

Facility : Doha, Qatar

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [1] [G]
 
CPVC
 
AL WAAB Pipe
 
SE 16558
16mm - 160mm  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Al Wasail Industrial Company 
King Abdulaziz Street
P.O. Box 124 
Buraydah 51411 
Saudi Arabia 
966 6 3816658
Visit this company's website

Facility : Buraydah, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe@ ++
 
HDPE
 
Al-Wasail PW HDPE Pipes
 
DIN 8074/DIN 8075
20 mm - 1200 mm

@ Only products bearing the NSF Mark on the product, product packaging, and/or
  documentation shipped with the product are Certified.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).



 
Al-Ola Saudi Plastic Products Co. ASPPCO 
P.O. Box 85145
Riyadh 11691 
Saudi Arabia 
966 11 2788899

Facility : Riyadh, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [1] [G]
 
CPVC
 
ASPPCO CPVC Pipes
 
ASTM F441
1/2" - 2"

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+ [1] [G]
 
PVC
 
ASPPCO UPVC
 
ASTM D1785
1/2" - 8"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
ALAC International, Inc. 
55 Broad Street 17/F
New York, NY 10004 
United States 
212-742-0235

Facility : Shandong, P.R. China

Ingredient Suppliers

Product Type Trade Name Max Use Level (phr)
Titanium Dioxide+ R-2195 5

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

NSF/ANSI 14 listed ingredients may be substituted for generically similar ingredients in NSF/ANSI 14 authorized PVC materials and compounds. The use level of the ingredient shall be in accordance with the formulation, but shall not exceed the maximum use level indicated in the official listing for the designated ingredient. By inclusion of "NSF Listed Source" on its authorized, registered formulation, authorization on the use of NSF listed ingredients is extended to compounder formulations.



 
Alpha Pipe Fittings Ltd. 
624 Neal Drive
Peterborough, ON K9J 6X7 
Canada 
800-465-1114 
705-741-0220

Facility : Peterborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+ [G]
 
PP
 
APF
 
ASTM D2609

Adapters, Barb x MPT
1/2" thru 4"   1/2" x 3/4"   1" x 1 1/4"   3/4" x 1"  
1" x 1 1/2"   3/4" x 1 1/4"   1 1/4" x 1 1/2"   1 1/2" x 2"  

Coupling, Barb x Barb
1/2" thru 4"   1/2" x 3/4"   1" x 1 1/4"   1/2" x 1"  
1" x 1 1/2"   3/4" x 1"   1" x 2"   3/4" x 1 1/4"  
1 1/4" x 1 1/2"   3/4" x 1 1/2"   1 1/4" x 2"   1 1/2" x 2"  

90° Ell, Barb x Barb
1/2" thru 2"  

90° Ell, Barb x MPT
1/2" thru 2"  

Poly Insert Plug, (Barb)
1 1/4"   1 1/2"   2"  

Tee, Barb x Barb x Barb
1/2" thru 2"   3/4" x 3/4" x½"   1" x 1" x 3/4"   1¼" x 1¼" x 3/4"  
1" x 1" x ½"   1¼" x 1¼" x ½"   1¼" x 1¼" x 1"   1½" x 1½" x ½"  
2" x 2" x ½"   1½" x 1½" x 3/4"   2" x 2" x 3/4"   1½" x 1½" x 1"  
2" x 2" x 1"   1½" x 1½" x 1¼"   2" x 2" x 1¼"   2" x 2" x 1½"  
3/4" x ½" x ½"   1½" x 1¼" x ½"   1" x 3/4" x ½"   1½" x 1¼" x 1"  
1" x 3/4" x 3/4"   1½" x 1¼" x 1¼"   1¼" x 1" x ½"   2" x 1½" x 1½"  
1¼" x 1" x 3/4"   1¼" x 1" x 1"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
NP
 
APF
 
ASTM D2609

Adapters (Barb x MPT)
1/2" thru 2"  

Nylon Insert Venturi Adapter (Insert x MPT)
1¼"  

Nylon Reducing Adapt (Barb x MPT)
1" x 1½"   1/2" x 3/4"   3/4" x 1¼"   1" x 1¼"  
1¼" x 1½"   3/4" x 1"   1½" x 2"  

Coupling (Barb x Barb)
1/2" thru 2"  

Nylon Reducing Coupling (Barb x Barb)
1" x 1½"   1¼" x 1½"   1/2" x 3/4"   3/4" x 1"  
3/4" x 1½"   1" x 1¼"   1" x 2"   1¼" x 2"  
1/2" x 1"   3/4" x 1¼"   1½" x 2"  

90° EII (Barb x Barb)
1/2" thru 2"  

90° EII (Barb x MPT)
1/2" thru 1½"  

Nylon Insert Plug (Barb)
1¼"   1½"   2"  

Tee (Barb x Barb x Barb)
1/2" thru 2"  

Nylon Reducing Tee (Barb x Barb x Barb)
1" x 1" x 1/2"   2" x 2" x 1"   3/4" x 1/2" x 1/2"   1" x 3/4" x 3/4"  
3/4" x 3/4" x 1/2"   1½" x 1½" x 3/4"   1" x 1" x 3/4"   2" x 2" 3/4"  
1" x 3/4" x 1/2"   1½" x 1½" x 1/2"   1½" x 1½" x 1"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PVC
 
APF
 
ASTM D2609

Reducing Elbow (Barb x FIPT)
½" x 3/4"  

Coupling (Barb x Barb)
3/4" x 3/4"   ½" x ½"   1" x 1"  

Reducing Coupling (Insert x Insert)
3/4" x 1/2"   1" x 1/2"   1" x 3/4"  

Reducing Tee (Barb x Barb x FIPT)
3/4"x 3/4"x ½"   1" x 1" x 1/2"   1" x 1" x 3/4"  

Reducing Elbow (Barb x FIPT)
3/4" x 1/2"   1" x 1/2"   1" x 3/4"  

Female Adapter (Barb x FIPT)
1/2" x 1/2"   3/4" x 3/4"   1" x 1"   1 1/4" x 1 1/4"  
1 1/2" x 1 1/2"   2" x 2"  

Male Reducing Adapter (MIPT x Insert)
1/2" x 1"   1/2" 3/4"   3/4" x 1/2"   3/4" x 1"  
1" x 3/4"  

Male Adapter (MIPT x Barb)
3/4" x 3/4"   ½" x ½"   1" x 1"  

Tee, (Barb x Barb x FIPT)
1/2" x 1/2" x 1/2"   3/4" x 3/4" x 3/4"   1" x 1" x 1"  

Elbow, (Barb x FIPT)
1/2" x 1/2"   3/4" x 3/4"   1" x 1"  

Insert Plug, (Barb)
1/2"   3/4"   1"   1 1/4"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Amaltech, Inc. 
30670 Bainbridge Road
Solon, OH 44139 
United States 
440-248-7500
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Bond On 900 PVC Cement ASTM D2564
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Fix On 800 PVC Cement ASTM D2564
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Fix On 900 PVC Cement ASTM D2564
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Bond On 905 PVC Cemnet Medium Clear ASTM D2564
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Chanal 605 Medium Clear PVC Cement ASTM D2564
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Thermo Guard MPF 905 PVC Plastic Pipe Cement Clear ASTM D2564
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Bond On 906 PVC Cement Gray CSA B137.3
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Bond On 906 PVC Cement Gray CSA B181.2
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Bond On 906 PVC Cement Gray ASTM D2564
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Fix On 816 PVC Cement CSA B137.3
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Fix On 816 PVC Cement CSA B181.2
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Fix On 816 PVC Cement ASTM D2564
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Bond On 917 PVC Cement HD Gray CSA B137.3
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Bond On 917 PVC Cement HD Gray CSA B181.2
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Bond On 917 PVC Cement HD Gray ASTM D2564
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Chanal 617 Heavy Duty Gray PVC Cement CSA B137.3
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Chanal 617 Heavy Duty Gray PVC Cement CSA B181.2
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Chanal 617 Heavy Duty Gray PVC Cement ASTM D2564
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Thermo Guard MPF 917 PVC Plastic Pipe Cement CSA B137.3
Solvent Cement (1, 2)+ ¢ [G] PVC PW, DWV, SW Thermo Guard MPF 917 PVC Plastic Pipe Cement CSA B181.2
Solvent Cement (1, 2)+ § [G] PVC PW, DWV, SW Thermo Guard MPF 917 PVC Plastic Pipe Cement ASTM D2564
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Bond On 914 CPVC Cement ASTM F493
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Bond On 914 CPVC Cement ASTM D2846
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Chanal 614 Heavy Bodied Orange CPVC Cement ASTM F493
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Chanal 614 Heavy Bodied Orange CPVC Cement ASTM D2846
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Fix On 814 CPVC Cement ASTM F493
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Fix On 814 CPVC Cement ASTM D2846
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Fix On 914 CPVC Cement ASTM F493
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Fix On 914 CPVC Cement ASTM D2846
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Thermo Guard MPF 914 CPVC Plastic Pipe Cement ASTM F493
Solvent Cement (1, 2)+ § [G] CPVC PW, DWV, SW Thermo Guard MPF 914 CPVC Plastic Pipe Cement ASTM D2846

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

(1) The compliance of this product with the health effects requirements of NSF/ANSI 61 was
    determined based on the testing of pipe and fittings assembled using the cement and EZ
    Weld 912xx LOW VOC Purple Primer or E-Z Weld 212xx LOW VOC Purple Primer. This cement
    may also be used in conjunction with E-Z Weld 911xx LOW VOC Clear Primer or E-Z Weld
    211xx LOW VOC Clear Primer.
    xx - Package size: 01, 02, 03, 04 and 05 indicate 1/4 pint, 1/2 pint, pint, quart and
    gallon respectively.
(2) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.


 
American Granby Inc. 
7652 Morgan Road
Liverpool, NY 13090 
United States 
315-451-1100

Facility : Jiangsu, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Valves (PW)+ @ [G]
 
PVC I-G1
 
Granby
 
ASTM F1970

Compact Ball Valves - Solvent Weld
HMIP50SE 1/2"   HMIP75SE 3/4"   HMIP100SE 1"   HMIP125SE 1 1/4"  
HMIP150SE 1 1/2"   HMIP200SE 2"  

Compact Ball Valves - Threaded
HMIP50TE 1/2"   HMIP75TE 3/4"   HMIP100TE 1"   HMIP125TE 1 1/4"  
HMIP150TE 1 1/2"   HMIP200TE 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Taichung, Taiwan

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Valves (PW)+ @ [G]
 
PVC I-G1
 
American Granby
 
ASTM F1970

Compact Ball Valves - Solvent Weld
HMIP50S 1/2"   HMIP50SE 1/2"   HMIP75S 3/4"   HMIP75SE 3/4"  
HMIP100S 1"   HMIP100SE 1"   HMIP125S 1 1/4"   HMIP125SE 1 1/4"  
HMIP150S 1 1/2"   HMIP150SE 1 1/2"   HMIP200S 2"   HMIP200SE 2"  

Compact Ball Valves - Threaded
HMIP50T 1/2"   HMIP50TE 1/2"   HMIP75T 3/4"   HMIP75TE 3/4"  
HMIP100T 1"   HMIP100TE 1"   HMIP125T 1 1/4"   HMIP125TE 1 1/4"  
HMIP150T 1 1/2"   HMIP150TE 1 1/2"   HMIP200T 2"   HMIP200TE 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Legend Manufacturing, LLC 
300 North Opdyke Road
Auburn Hills, MI 48326 
United States 
800-752-2082 
248-630-7438
Visit this company's website

Facility : Auburn Hills, MI

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe¢ § +++ [1] [2]
 
PE-RT 4710
 
Legend HyperPure
 
ASTM F2769
1/4" - 2" Sch 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Meets the chlorine resistance requirements of ASTM F2769 when tested in accordance with
    ASTM F2023.
[2] Certified for red, white, blue, and natural colored tubing.

Pipe¢ § +++ [1] [2]
 
PE-RT 4710
 
Legend HyperPure
 
CSA B137.18
1/4" - 2" Sch 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Meets the chlorine resistance requirements of ASTM F2769 when tested in accordance with
    ASTM F2023.
[2] Certified for red, white, blue, and natural colored tubing.

Pipe¢ § +++ [1] [2]
 
PE-RT 4710
 
Aquapure
 
ASTM F2769
1/2" - 2" Sch 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Meets the chlorine resistance requirements of ASTM F2769 when tested in accordance with
    ASTM F2023.
[2] Certified for red, white, blue, and natural colored tubing.

Pipe¢ § +++ [1] [2]
 
PE-RT 4710
 
Aquapure
 
CSA B137.18
1/4" - 2" Sch 9

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Meets the chlorine resistance requirements of ASTM F2769 when tested in accordance with
    ASTM F2023.
[2] Certified for red, white, blue, and natural colored tubing.



 
American Valve 
4321 Piedmont Pkwy
Greensboro, NC 27410 
United States 
800-645-0101 
336-207-0552
Visit this company's website

Facility : Taizhou, Zhejiang, China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings@ ++ [G]
 
MLTPL
 
American Valve
 
ASTM F1970

P600CTS Compression Coupling
1/2" (P600CTS 1/2")   3/4" (P600CTS 3/4")   1" (P600CTS 1")  

@ Products rated at 150psi/73°F and 45psi/180°F.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves# + [G]
 
MLTPL
 
American Valve
 
ASTM F1970

P200 PVC Ball Valve IPS
1/2" (P200 1/2")   3/4" (P200 3/4")   1" (P200 1")   1 1/4" (P200 1 1/4")  
1 1/2" (P200 1 1/2")   2" (P200 2")  

P200S PVC Ball Valve Socket
1/2" (P200S 1/2")   3/4" (P200S 3/4")   1" (P200S 1")   1 1/4" (P200S 1 1/4")  
1 1/2" (P200S 1 1/2")   2" (P200S 2")  

P200U-40 True Union Ball Valve
1/2" (P200U-40 1/2")   3/4" (P200U-40 3/4")   1" (P200U-40 1")   1 1/4" (P200U-40 1 1/4")  
1 1/2" (P200U-40 1 1/2")   2" (P200U-40 2")  

V200SUE Single Union Ball Valve
1 1/2" (V200SUE 1 1/2")   2" (V200SUE 2")  

# Product tested for use in 73°F with a rated pressure of 150 psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves@ ++ [G]
 
MLTPL
 
American Valve
 
ASTM F1970

P200CTS CPVC Ball Valve
1/2" (P200CTS 1/2")   3/4" (P200CTS 3/4")   1" (P200CTS 1")  

P60S Stop & Waste Valve
3/4" (P60S 3/4")   1/2" (P60S 1/2")  

@ Products rated at 150psi/73°F and 45psi/180°F.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
American Valve Inc. 
4321 Piedmont Parkway
Greensboro, NC 27410 
United States 
336-668-0554

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Valve (PW)+ @ [G]
 
PVC I-G1
 
American Valve
 
ASTM F1970

Compact Ball Valves (PW) - Threaded
ML2621-005  

Compact Ball Valves - Solvent Weld
P200S 1/2"  

Compact Ball Valves (PW) - Threaded
ML2621-007  

Compact Ball Valves - Solvent Weld
P200S 3/4"   P200S 1"  

Compact Ball Valves (PW) - Threaded
ML2621-010  

Compact Ball Valves - Solvent Weld
P200S 1 1/4"  

Compact Ball Valves (PW) - Threaded
ML2621-012   ML2621-015  

Compact Ball Valves - Solvent Weld
P200S 1 1/2"  

Compact Ball Valves (PW) - Threaded
ML2621-020  

Compact Ball Valves - Solvent Weld
P200S 2"   P200S-80 1/2"  

Compact Ball Valves (PW) - Threaded
P200 1/2"  

Compact Ball Valves - Solvent Weld
P200S-80 3/4"  

Compact Ball Valves (PW) - Threaded
P200 3/4"   P200 1"  

Compact Ball Valves - Solvent Weld
P200S-80 1"  

Compact Ball Valves (PW) - Threaded
P200 1 1/4"  

Compact Ball Valves - Solvent Weld
P200S-80 1 1/4"   P200S-80 1 1/2"  

Compact Ball Valves (PW) - Threaded
P200 1 1/2"   P200 2"  

Compact Ball Valves - Solvent Weld
P200S-80 2"   P202S 1/2"  

Compact Ball Valves (PW) - Threaded
P200-80 1/2"   P200-80 3/4"  

Compact Ball Valves - Solvent Weld
P202S 3/4"   P202S 1"  

Compact Ball Valves (PW) - Threaded
P200-80 1"  

Compact Ball Valves - Solvent Weld
P202S 1 1/4"  

Compact Ball Valves (PW) - Threaded
P200-80 1 1/4"  

Compact Ball Valves - Solvent Weld
P202S 1 1/2"  

Compact Ball Valves (PW) - Threaded
P200-80 1 1/2"  

Compact Ball Valves - Solvent Weld
P202S 2"  

Compact Ball Valves (PW) - Threaded
P200-80 2"   P202 1/2"   P202 3/4"   P202 1"  
P202 1 1/4"   P202 1 1/2"   P202 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves (PW)+ @ [G]
 
PVC I-G1
 
MAINLINE
 
ASTM F1970

Compact Ball Valves - Solvent Weld
ML2622-005   ML2622-007   ML2622-010   ML2622-012  
ML2622-015   ML2622-020  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves (PW)+ @ [G]
 
PVC I-G1
 
P200S
 
ASTM F1970

Compact Ball Valves - Solvent Weld
1/2" thru 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves (PW)+ @ [G]
 
PVC I-G1
 
P200
 
ASTM F1970

Compact Ball Valves - Threaded
1/2" thru 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Taichung, Taiwan

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Valves (PW)+ @ [G]
 
PVC I-G1
 
American Valve
 
ASTM F1970

Compact Ball Valves - Solvent Weld
P200S 1/2"   P200S 3/4"   P200S 1"   P200S 1 1/4"  
P200S 1 1/2"   P200S 2"   P200S-80 1/2"   P200S-80 3/4"  
P200S-80 1"   P200S-80 1 1/4"   P200S-80 1 1/2"   P200S-80 2"  
P201S 1/2"   P201S 3/4"   P201S 1"   P201S 1 1/4"  
P201S 1 1/2"   P201S 2"   P202S 1/2"   P202S 3/4"  
P202S 1"   P202S 1 1/4"   P202S 1 1/2"   P202S 2"  

Compact Ball Valves - Threaded
ML2621-005   ML2621-007   ML2621-010   ML2621-012  
ML2621-015   ML2621-020   P200 1/2"   P200 3/4"  
P200 1"   P200 1 1/4"   P200 1 1/2"   P200 2"  
P200-80 1/2"   P200-80 3/4"   P200-80 1"   P200-80 1 1/4"  
P200-80 1 1/2"   P200-80 2"   P201 1/2"   P201 3/4"  
P201 1"   P201 1 1/4"   P201 1 1/2"   P201 2"  
P202 1/2"   P202 3/4"   P202 1"   P202 1 1/4"  
P202 1 1/2"   P202 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Valves (PW)+ @ [G]
 
PVC I-G1
 
MAINLINE
 
ASTM F1970

Compact Ball Valves - Solvent Weld
ML2622-005   ML2622-007   ML2622-010   ML2622-012  
ML2622-015   ML2622-020  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anchor Allied Factory Ltd. 
Street No. 17
Industrial Area 15 
Sharjah 21152 
United Arab Emirates 
97 165 342 091
Visit this company's website

Facility : Ras Al Khaima, United Arab Emirates

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement (1,2)+++ CPVC PW Weldfix CPVC C914 ASTM F493
Solvent Cement (1,2)+ PVC PW Weldfix UPVC Cement P 917 ASTM D2564

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

(1) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    without a primer.
(2) This product is acceptable for use with pipe and fittings sized 1/2" and greater diamter.


 
Anderson Fittings 
255 East Industry Avenue
Frankfort, IL 60423 
United States 
800-323-5284 
815-469-8201
Visit this company's website

Facility : # 3 USA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
Brass
 
AF PEX LEADFREE
 
ASTM F1807

MPT x PEX Barb Elbow
3/8" - 2"  

PEX Barb Elbow
3/8" - 2"  

PEX Barb Reducing Elbow
3/8" - 2"  

PEX Barb Reducing Tee
3/8" - 2"  

PEX Barb Tee
3/8" - 2"  

PEX Barb x Cu Sweat Elbow
3/8" - 2"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
Brass
 
AF PEX LEADFREE
 
CSA B137.5

MPT x PEX Barb Elbow
3/8" - 2"  

PEX Barb Elbow
3/8" - 2"  

PEX Barb Reducing Elbow
3/8" - 2"  

PEX Barb Reducing Tee
3/8" - 2"  

PEX Barb Tee
3/8" - 2"  

PEX Barb x Cu Sweat Elbow
3/8" - 2"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Frankfort, IL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ § +++ [G]
 
Brass
 
AF PEX LEADFREE
 
ASTM F1807

MPT x PEX Barb Elbow
3/8" - 2"  

Male Sweat x PEX Barb
3/8" - 2"  

PEX Barb Adapter
3/8" - 2"  

PEX Barb Coupling
3/8" - 2"  

PEX Barb Elbow
3/8" - 2"  

PEX Barb Plug
3/8" - 2"  

PEX Barb Reducing Coupling
3/8" - 2"  

PEX Barb Reducing Elbow
3/8" - 2"  

PEX Barb Reducing Tee
3/8" - 2"  

PEX Barb Swivel Adapters
3/8" - 3/4"  

PEX Barb Tee
3/8" - 2"  

PEX Barb x Compression Adapter
3/8" - 3/4"  

PEX Barb x Cu Sweat Elbow
3/8" - 2"  

PEX Barb x FIP Swivel Adapter
3/8" - 2"  

PEX Barb x FPT Adapter
3/8" - 2"  

PEX Barb x FPT Drop Ear Elbow
1/2" - 3/4"  

PEX Barb x Female Sweat Adapter
3/8" - 2"  

PEX Barb x MPT Adapter
3/8" - 2"  

PEX Barb x PB Tube Coupling
3/8" - 1  

PEX Barb x PE Tube Coupling
3/8" - 1  

PEX Barb x Swivel Adapter
3/8" - 2"  

Plug Seal Manifold
3/8" - 2"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
Brass
 
AF PEX LEADFREE
 
CSA B137.5

MPT x PEX Barb Elbow
3/8" - 2"  

Male Sweat x PEX Barb
3/8" - 2"  

PEX Barb Adapter
3/8" - 2"  

PEX Barb Coupling
3/8" - 2"  

PEX Barb Elbow
3/8" - 2"  

PEX Barb Plug
3/8" - 2"  

PEX Barb Reducing Coupling
3/8" - 2"  

PEX Barb Reducing Elbow
3/8" - 2"  

PEX Barb Reducing Tee
3/8" - 2"  

PEX Barb Swivel Adapters
3/8" - 3/4"  

PEX Barb Tee
3/8" - 2"  

PEX Barb x Compression Adapter
3/8" - 3/4"  

PEX Barb x Cu Sweat Elbow
3/8" - 2"  

PEX Barb x FIP Swivel Adapter
3/8" - 2"  

PEX Barb x FPT Adapter
3/8" - 2"  

PEX Barb x FPT Drop Ear Elbow
1/2" - 3/4"  

PEX Barb x Female Sweat Adapter
3/8" - 2"  

PEX Barb x MPT Adapter
3/8" - 2"  

PEX Barb x PB Tube Coupling
3/8" - 1  

PEX Barb x PE Tube Coupling
3/8" - 1  

PEX Barb x Swivel Adapter
3/8" - 2"  

Plug Seal Manifold
3/8" - 2"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Copper Stub Outs
 
ASTM F1807
1/2" - 1"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Copper Stub Outs
 
ASTM F877
1/2" - 1"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Copper Stub Outs
 
CSA B137.5
1/2" - 1"  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Formed Copper Stubout
 
ASTM F1807
3/8" - 1"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Formed Copper Stubout
 
ASTM F877
3/8" - 1"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ § +++ [G]
 
MLTPL
 
Anderson F1807 Formed Copper Stubout
 
CSA B137.5
3/8" - 1"

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Anvil International, LLC 
2 Holland Way
Exeter, NH 03833 
United States 
603-418-2800

Facility : # 1 USA

Thread Compounds, Sealants and Lubricants

Product Type For Use With Trade Name
Lubricant+ PW, DWV, SW Gruvlok Quick Dry Lubricant

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.



 
AQUA GAS GROUP - BOR plus 
Street 30, Community 597, Dip 2
56790 Dubai 
United Arab Emirates 
971 4 882 9588
Visit this company's website

Facility : Dubai, United Arab Emirates

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [1] [G]
 
PP
 
BORPLUS PP-R FASER SDR 6 Pipe
 
DIN8077/8078
25 mm - 90 mm

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+++ [1] [G]
 
PP
 
BORPLUS PP-R FASER SDR 7.4 Pipe
 
DIN8077/8078
25 mm - 90 mm

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
Aqua Gas Plastic Industries- AQUATERRA 
Street 30, Community 597, Dip 2
Dubai 56790 
United Arab Emirates 
971 48 829 588
Visit this company's website

Facility : Dubai, United Arab Emirates

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [1] [G]
 
PP
 
AQUATERRA FASER SDR 6 pipe
 
DIN 8077/8078
25mm - 90mm

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe+++ [1] [G]
 
PP
 
AQUATERRA FASER SDR 7.4 pipe
 
DIN 8077/8078
25mm - 90mm

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



 
AquaCal AutoPilot, Inc. 
2737 24th Street North
Saint Petersburg, FL 33713 
United States 
800-786-7751 
727-823-5642
Visit this company's website

Facility : Saint Petersburg, FL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Slip Tee (Slip x Slip x Slip) Sch 40
Item 101  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Slip Tee Reducing (Slip x Slip x Reducing Slip) Sch 40
Item 104  
3/4" x 3/4" x 1/2"
1" x 1" x 1/2"
1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1/2"
1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1 1/4" x 1"
1 1/2" x 1 1/2" x 1/2"
1 1/2" x 1 1/2" x 3/4"
1 1/2" x 1 1/2" x 1"
1 1/2" x 1 1/2" x 1 1/4"
2" x 2" x 1/2"
2" x 2" x 3/4"
2" x 2" x 1"
2" x 2" x 1 1/4"
2" x 2" x 1 1/2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Combination Tee (Slip x Slip x FPT) Sch 40
Item 105  
1/2" x 1/2" x 1/2"
3/4" x 3/4" x 1/2"
1" x 1" x 1/2"
1 1/4" x 1 1/4" x 1/2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Slip Elbow 90° (Slip x Slip) Sch 40
Item 106  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Threaded Elbow 90° (Slip x FIPT) Sch 40
Item 107  
1/2" - 2"
3/4" x 1/2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Slip Elbow 45° (Slip x Slip) Sch 40
Item 108  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Slip Coupling (Slip x Slip) Sch 40
Item 110  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Reducing Bushing (Slip x Slip) Sch 40
Item 120  
3/4" x 1/2"
1" x 1/2"
1" x 3/4"
1 1/4" x 3/4"
1 1/4" x 1"
1 1/2" x 1"
1 1/2" x 1 1/4"
2" x 1 1/4"
2" x 1 1/2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Female Adapter (Slip x FIPT) Sch 40
Item 111  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Slip Cap (Slip) Sch 40
Item 114  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Male Adapter (Slip x MPT) Sch 40
Item 116  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

Cap (FIPT) Sch 40
Item 118  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

90° Street Ell (SP x Slip) Sch 40
Item 113  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I-G1
 
JBF
 
ASTM D2466

45° Street Ell (SP x Slip) Sch 40
Item 109  
1"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBF
 
ASTM D2466

90° Street Ell (Slip x MPT) Sch 40
Item 115  
1/2" - 2"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I-G1
 
JBF
 
ASTM D2466

Plug (Spigot) Sch 40
Item 121  
3/4"

Plug (MIPT) Sch 40
Item 122  
3/4"

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Male Adapter (Slip x MPT) Sch 40

Item 116
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Cap (FIPT) Sch 40

Item 118
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Slip Cap (Slip) Sch 40

Item 114
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Female Adapter (Slip x FIPT) Sch 40

Item 111
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Reducing Bushing (Slip x Slip) Sch 40

Item 120
3/4" x 1/2"   1" x 1/2"   1" x 3/4"   1 1/4" x 3/4"  
1 1/4" x 1"   1 1/2" x 1"   1 1/2" x 1 1/4"   2" x 1 1/4"  
2" x 1 1/2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Slip Coupling (Slip x Slip) Sch 40

Item 110
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Slip Elbow 45° (Slip x Slip) Sch 40

Item 108
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Threaded Elbow 90° (Slip x FIPT) Sch 40

Item 107
1/2" - 2"   3/4" x 1/2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Slip Elbow 90° (Slip x Slip) Sch 40

Item 106
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Combination Tee (Slip x Slip x FPT) Sch 40

Item 105
1/2" x 1/2" x 1/2"   3/4" x 3/4" x 1/2"   1" x 1" x 1/2"   1 1/4" x 1 1/4" x 1/2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Slip Tee Reducing (Slip x Slip x Reducing Slip) Sch 40

Item 104
3/4" x 3/4" x 1/2"   1" x 1" x 1/2"   1" x 1" x 3/4"   1 1/4" x 1 1/4" x 1/2"  
1 1/4" x 1 1/4" x 3/4"   1 1/4" x 1 1/4" x 1"   1 1/2" x 1 1/2" x 1/2"   1 1/2" x 1 1/2" x 3/4"  
1 1/2" x 1 1/2" x 1"   1 1/2" x 1 1/2" x 1 1/4"   2" x 2" x 1/2"   2" x 2" x 3/4"  
2" x 2" x 1"   2" x 2" x 1 1/4"   2" x 2" x 1 1/2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
Slip Tee (Slip x Slip x Slip) Sch 40

Item 101
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I-G1
 
JBP
 
ASTM D2466
Plug (Spigot) Sch 40

Item 121
3/4"  
Plug (MIPT) Sch 40

Item 122
3/4"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I-G1
 
JBP
 
ASTM D2466
45° Street Ell (SP x Slip) Sch 40

Item 109
1"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
90° Street Ell (SP x Slip) Sch 40

Item 113
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.

Fittings+
 
PVC I
 
JBP
 
ASTM D2466
90° Street Ell (Slip x MPT) Sch 40

Item 115
1/2" - 2"  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.



 
Aquatherm GmbH 
Biggen 5
D-57439 Attendorn 
Germany 
49 272 29500
Visit this company's website

Facility : Attendorn, Germany

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
ASTM F2389

Threaded Back plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
ASTM F2389
0620158 (1/2" - 20mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
ASTM F2389
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621110 (1/2" - 20mm) x 3/4" FIP   0621111 (3/4" - 25mm) x 1/2" FIP  
0621112 (3/4" - 25mm) x 3/4" FIP   0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP  
0621116 (1 1/4" - 40mm) x 1 1/4" FIP   0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP  
0621120 (2" - 63mm) x 2" FIP   0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP  
0621211 (3/4" - 25mm) x 1/2" MIP   0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP  
0621310 (1/2" - 20mm) x 3/4" MIP   0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP  
0621317 (1 1/4" - 40mm) x 1" MIP   0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP   0621320 (1.5" - 50mm) x 1.5" MIP  
0621321 (2" - 63mm) x 1.5" MIP   0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP  
0621325 (3" - 90mm) x 3" MIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
ASTM F2389
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
ASTM F2389
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
ASTM F2389
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
CSA B137.11

Threaded Back Plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
CSA B137.11
0620158 (1/2" - 20mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
CSA B137.11
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621111 (3/4" - 25mm) x 1/2" FIP   0621112 (3/4" - 25mm) x 3/4" FIP  
0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP   0621116 (1 1/4" - 40mm) x 1 1/4" FIP  
0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP   0621120 (2" - 63mm) x 2" FIP  
0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP   0621211 (3/4" - 25mm) x 1/2" MIP  
0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP   0621310 (1/2" - 20mm) x 3/4" MIP  
0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP   0621317 (1 1/4" - 40mm) x 1" MIP  
0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP   0621320 (1.5" - 50mm) x 1.5" MIP   0621321 (2" - 63mm) x 1.5" MIP  
0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP   0621325 (3" - 90mm) x 3" MIP  
0621110 (1/2" - 20mm) x 3/4" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
CSA B137.11
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
CSA B137.11
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings¢ +++ [G]
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
CSA B137.11
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Socket
 
ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Reducer
 
ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111176 (160/125 mm) SDR 7.4
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Tee
 
ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Cross
 
ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® End Cap
 
ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings$ * +++ [G]
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
ASTM F2389
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings$ * +++ [G]
 
PP
 
Aquatherm greenpipe® Flange
 
ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
ASTM F2389
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)[G]

0115840 (Joint - PP - 25 mm)[G]

0115842 (Joint - PP - 32 mm)[G]

0115844 (Joint - PP - 40 mm)[G]

0115846 (Joint - PP - 50 mm)[G]

0115848 (Joint - PP - 63 mm)[G]

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Electrofusion
 
ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
ASTM F2389
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Insulation
 
ASTM F2389
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * +++ [G]
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * +++ [G]
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * +++ [G]
 
PP
 
Aquatherm greenpipe® Faser
 
ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Piece
 
ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Tee
 
ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Connecting Union
 
ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Counterpart for
 
ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Globe Valve
 
ASTM F2389
0140808 (20 mm)
0140810 (25 mm)
0140812 (32 mm)
0140814 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* +++ [G]
 
PP
 
Aquatherm greenpipe® Concealed Valve
 
ASTM F2389
0140858 (Chrome Plated - 20 mm)
0140860 (Chrome Plated - 25 mm)
0140862 (Chrome Plated - 32 mm)
0140868 (Tamper-Proof - Short - 20 mm)
0140870 (Tamper-Proof - Short - 25 mm)
0140872 (Tamper-Proof - Short - 32 mm)
0140878 (Flexible Insta. Depth - 20 mm)
0140880 (Flexible Insta. Depth - 25 mm)
0140882 (Flexible Insta. Depth - 32 mm)
0140888 (Tamper-Proof - Long - 20 mm)
0140890 (Tamper-Proof - Long - 25 mm)
0140892 (Tamper-Proof - Long - 32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Pipe
 
CSA B137.11
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Pipe
 
CSA B137.11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe& * ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Faser
 
CSA B137.11
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160mm) SDR 7.4
0670784 (UV - 200mm) SDR 7.4
0670788 (UV - 250mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Socket
 
CSA B137.11
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Reducer
 
CSA B137.11
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111176 (160/125 mm) SDR 7.4
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
CSA B137.11
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
CSA B137.11
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
CSA B137.11
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Tee
 
CSA B137.11
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
CSA B137.11
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Cross
 
CSA B137.11
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® End Cap
 
CSA B137.11
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
CSA B137.11
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
CSA B137.11
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Flange
 
CSA B137.11
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
CSA B137.11
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)
0115840 (Joint - PP - 25 mm)
0115842 (Joint - PP - 32 mm)
0115844 (Joint - PP - 40 mm)
0115846 (Joint - PP - 50 mm)
0115848 (Joint - PP - 63 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
CSA B137.11
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Electrofusion
 
CSA B137.11
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
CSA B137.11
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
CSA B137.11
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Insulation
 
CSA B137.11
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
CSA B137.11
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
CSA B137.11
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
CSA B137.11
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
CSA B137.11
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
CSA B137.11
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
CSA B137.11
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Tee
 
CSA B137.11
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Adapter
 
CSA B137.11
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Connecting Union
 
CSA B137.11
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
CSA B137.11
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Transition Joint
 
CSA B137.11
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Counterpart for
 
CSA B137.11
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
CSA B137.11
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200 - 250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
CSA B137.11
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings* ¢ +++ [G]
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
CSA B137.11
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Back Plate Elbow
 
ASTM F2389
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Back Plate Elbow
 
CSA B137.11
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
ASTM F2389
920158 (20 mm x 1/2" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Back Plate Elbow Dry Construction
 
CSA B137.11
920158 (20 mm x 1/2" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
ASTM F2389
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thrd Round
 
CSA B137.11
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
ASTM F2389
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-Hex
 
CSA B137.11
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Piece
 
ASTM F2389
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Piece
 
CSA B137.11
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
ASTM F2389
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Pc w/Female Thread-ISO
 
CSA B137.11
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
ASTM F2389
1123018 (32 mm x 1" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Trans Elbow w/Female Thread-NPT
 
CSA B137.11
1123018 (32 mm x 1" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
ASTM F2389
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Transition Elbow with Male Thread
 
CSA B137.11
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
ASTM F2389
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - ISO
 
CSA B137.11
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
ASTM F2389
1125016 (32 mm x 1" F x 32 mm SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Threaded Branch Tee - NPT
 
CSA B137.11
1125016 (32 mm x 1" F x 32 mm SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
ASTM F2389
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
 
CSA B137.11
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+++ [G]
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
ASTM F2389
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Fittings+ [G]
 
PP
 
Fusiotherm® Weld-In Saddle w/ Female Thread
 
CSA B137.11
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS)

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Reclaimed Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe
 
PP
 
Aquatherm Lilac Pipe
 
ASTM F2389
9010810 (25 mm) SDR 7.4
9010212 (32 mm) SDR 11
9010214 (40 mm) SDR 11
9010216 (50 mm) SDR 11
9010218 (63 mm) SDR 11
9010220 (75 mm) SDR 11
9010222 (90 mm) SDR 11
9010224 (110 mm) SDR 11
9010226 (125 mm) SDR 11
9010230 (160 mm) SDR 11
9010234 (200 mm) SDR 11
9010238 (250 mm) SDR 11

Pipe¢
 
PP
 
Aquatherm Lilac Pipe
 
CSA B137.11
9010208 (20 mm) SDR 11
9010210 (25 mm) SDR 11
9010212 (32 mm) SDR 11
9010214 (40 mm) SDR 11
9010216 (50 mm) SDR 11
9010218 (63 mm) SDR 11
9010220 (75 mm) SDR 11
9010222 (90 mm) SDR 11
9010224 (110 mm) SDR 11
9010226 (125 mm) SDR 11
9010230 (160 mm) SDR 11
9010234 (200 mm) SDR 11
9010238 (250 mm) SDR 11

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.


Industrial Applications

</
Product Type   Material Type   Trade Name   Product Standard

Pipe%
 
PP
 
Aquatherm Blue Pipe® Faser
 
ASTM F2389
2670708 (20 mm) SDR 7.4
2670710 (25 mm) SDR 7.4
2670112 (32 mm) SDR 11
2670114 (40 mm) SDR 11
2670116 (50 mm) SDR 11
2670118 (63 mm) SDR 11
2670120 (75 mm) SDR 11
2670122 (90 mm) SDR 11
2670124 (110 mm) SDR 11
2670126 (125 mm) SDR 11
2670130 (160 mm) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
2570130 (160 mm) SDR 17.6
2570134 (200 mm) SDR 17.6
2570138 (250 mm) SDR 17.6
2570142 (315 mm) SDR 17.6
2570144 (355 mm) SDR 17.6
2570146 (400 mm) SDR 17.6
2570148 (450 mm) SDR 17.6
2570150 (500 mm) SDR 17.6
2570152 (560 mm) SDR 17.6
2570154 (630 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe® Pipe
 
ASTM F2389
2610208 (20 mm) SDR 11
2610210 (25 mm) SDR 11
2610212 (32 mm) SDR 11
2610214 (40 mm) SDR 11
2610216 (50 mm) SDR 11
2610218 (63 mm) SDR 11
2610220 (75 mm) SDR 11
2610222 (90 mm) SDR 11
2610224 (110 mm) SDR 11
2610226 (125 mm) SDR 11
2610230 (160 mm) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe® MF RP
 
ASTM F2389
1970712 (32mm) SDR 9
1970714 (40mm) SDR 9
1970716 (50mm) SDR 9
1970718 (63mm) SDR 9
1970720 (75mm) SDR 9
1970722 (90mm) SDR 9
1970724 (110mm) SDR 9
1970726 (125mm) SDR 9
1970730 (160mm) SDR 9
1970734 (200mm) SDR 9
1970738 (250mm) SDR 9
1970742 (315mm) SDR 9
2670708 (20 mm) SDR 7.4
2670710 (25 mm) SDR 7.4
2670112 (32 mm) SDR 11
2670114 (40 mm) SDR 11
2670116 (50 mm) SDR 11
2670118 (63 mm) SDR 11
2670120 (75 mm) SDR 11
2670122 (90 mm) SDR 11
2670124 (110 mm) SDR 11
2670126 (125 mm) SDR 11
2670130 (160 mm) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
3570126 (125 mm) SDR 17.6
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
3570154 (630 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe®
 
CSA B137.11
2610208 (20 mm) SDR 11
3570154 (630 mm) SDR 17.6
2610212 (32 mm) Sch 11
2610214 (40 mm) Sch 11
2610216 (50 mm) SDR 11
2610218 (63 mm) SDR 11
2610220 (75 mm) SDR 11
2610222 (90 mm) SDR 11
2610224 (110 mm) SDR 11
2610226 (125 mm) SDR 11
2610230 (160 mm) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
3570126 (125 mm) SDR 17.6
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
2610210 (25 mm) Sch 11

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Pipe%
 
PP
 
Aquatherm Blue Pipe® MF RP
 
CSA B137.11
1970712 (32mm) SDR 9
1970714 (40mm) SDR 9
1970716 (50mm) SDR 9
1970718 (63mm) SDR 9
1970720 (75mm) SDR 9
1970722 (90mm) SDR 9
1970724 (110mm) SDR 9
1970726 (125mm) SDR 9
1970730 (160mm) SDR 9
1970734 (200mm) SDR 9
1970738 (250mm) SDR 9
1970742 (315mm) SDR 9
2610210 (25 mm) Sch 11
2610216 (50 mm) SDR 11
2610310 (25 mm - Coil: 100 m) SDR 11
2610226 (125 mm) SDR 11 SDR 11
2610220 (75 mm) SDR 11
2610214 (40 mm) Sch 11
2610208 (20 mm) SDR 11
2610312 (32 mm - Coil: 100 m) SDR 11
2610308 (20 mm - Coil: 100 m) SDR 11
2610230 (160 mm) SDR 11
2610224 (110 mm) SDR 11
2610222 (90 mm) SDR 11
2610218 (63 mm) SDR 11
2610212 (32 mm) Sch 11
2670134 (200 mm) SDR 11
2670138 (250 mm) SDR 11
2070142 (315 mm) SDR 11
2070144 (355 mm) SDR 11
2070146 (400 mm) SDR 11
2070148 (450 mm) SDR 11
3570126 (125 mm) SDR 17.6
3570130 (160 mm) SDR 17.6
3570134 (200 mm) SDR 17.6
3570138 (250 mm) SDR 17.6
3570142 (315 mm) SDR 17.6
3570144 (355 mm) SDR 17.6
3570146 (400 mm) SDR 17.6
3570148 (450 mm) SDR 17.6
3570150 (500 mm) SDR 17.6
3570152 (560 mm) SDR 17.6
3570154 (630 mm) SDR 17.6

% Product may also carry the designations "Climatherm®” , "Climatherm® Faser", and
  "Climatherm® OT Faser".

Fittings
 
PP
 
Aquatherm Blue Pipe®
 
ASTM F2389
2515430 (6") SDR 17.6
2515434 (8") SDR 17.6
2515438 (10") SDR 17.6
2515442 (12") SDR 17.6
2515444 (14") SDR 17.6
2515446 (16") SDR 17.6
2515448 (18") SDR 17.6
2515450 (20") SDR 17.6
2515454 (24") SDR 17.6

Fittings
 
PP
 
Aquatherm Blue 45º Wye
 
ASTM F2389
2113122 (3" - 90mm) SDR 11
2113124 (3 1/2" - 110mm) SDR 11
2113126 (4" - 125mm) SDR 11
2113131 (6" - 160mm) SDR 11
2113135 (8" - 200mm) SDR 11
2113139 (10" - 250mm) SDR 11
2113130 (6" - 160mm) SDR 17.6
2113134 (8" - 200mm) SDR 17.6
2113138 (10" - 250mm) SDR 17.6

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
ASTM F2389

Threaded Back plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
ASTM F2389
0620158 (1/2" - 20mm) x 1/2" FIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
ASTM F2389
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621110 (1/2" - 20mm) x 3/4" FIP   0621111 (3/4" - 25mm) x 1/2" FIP  
0621112 (3/4" - 25mm) x 3/4" FIP   0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP  
0621116 (1 1/4" - 40mm) x 1 1/4" FIP   0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP  
0621120 (2" - 63mm) x 2" FIP   0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP  
0621211 (3/4" - 25mm) x 1/2" MIP   0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP  
0621310 (1/2" - 20mm) x 3/4" MIP   0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP  
0621317 (1 1/4" - 40mm) x 1" MIP   0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP   0621320 (1.5" - 50mm) x 1.5" MIP  
0621321 (2" - 63mm) x 1.5" MIP   0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP  
0621325 (3" - 90mm) x 3" MIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
ASTM F2389
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
ASTM F2389
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings+++
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
ASTM F2389
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - NPT
 
CSA B137.11

Threaded Back Plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP   0620110 (1/2" - 20mm) x 3/4" FIP   0620112 (3/4" - 25mm) x 3/4" FIP   0620113 (3/4" - 25mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Wing Back 90 Elbow
 
CSA B137.11
0620158 (1/2" - 20mm) x 1/2" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® Transition Piece
 
CSA B137.11
0621008 (1/2" - 20mm) x 1/2" FIP   0621010 (1/2" - 20mm) x 3/4" FIP   0621011 (3/4" - 25mm) x 1/2" FIP   0621012 (3/4" - 25mm) x 3/4" FIP  
0621013 (1" - 32mm) x 3/4" FIP   0621108 (1/2" - 20mm) x 1/2" FIP   0621111 (3/4" - 25mm) x 1/2" FIP   0621112 (3/4" - 25mm) x 3/4" FIP  
0621113 (1" - 32mm) x 3/4" FIP   0621114 (1" - 32mm) x 1" FIP   0621115 (1 1/4" - 40mm) x 1" FIP   0621116 (1 1/4" - 40mm) x 1 1/4" FIP  
0621117 (1 1/2" - 50mm) x 1 1/4" FIP   0621118 (1.5" - 50mm) x 1.5" FIP   0621119 (2" - 63mm) x 1.5" FIP   0621120 (2" - 63mm) x 2" FIP  
0621122 (2.5" - 75mm) x 2" FIP   0621208 (1/2" - 20mm) x 1/2" MIP   0621210 (1/2" - 20mm) x 3/4" MIP   0621211 (3/4" - 25mm) x 1/2" MIP  
0621212 (3/4" - 25mm) x 3/4" MIP   0621213 (1" - 32mm) x 3/4" MIP   0621308 (1/2" - 20mm) x 1/2" MIP   0621310 (1/2" - 20mm) x 3/4" MIP  
0621312 (3/4" - 25mm) x 3/4" MIP   0621314 (1" - 32mm) x 1" MIP   0621316 (1" - 32mm) x 1.25" MIP   0621317 (1 1/4" - 40mm) x 1" MIP  
0621318 (1.25" - 40mm) x 1.25" MIP   0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP   0621320 (1.5" - 50mm) x 1.5" MIP   0621321 (2" - 63mm) x 1.5" MIP  
0621322 (2" - 63mm) x 2" MIP   0621323 (2.5" - 75mm) x 2" MIP   0621324 (2.5" - 75mm) x 2.5" MIP   0621325 (3" - 90mm) x 3" MIP  
0621110 (1/2" - 20mm) x 3/4" FIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Elbow
 
CSA B137.11
0623008 (1/2" - 20mm) x 3/4" FIP NPT   0623010 (1/2" - 20mm) x 1/2" FIP NPT   0623012 (3/4" - 25mm) x 3/4" FIP NPT   0623014 (3/4" - 25mm) x 1/2" FIP NPT  
0623016 (1" - 32mm) x 3/4" FIP NPT   0623018 (1" - 32mm) x 1" FIP NPT   0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female   0623506 (1/2" - 20mm) x 1/2" MIP NPT  
0623508 (1/2" - 20mm) x 3/4" MIP NPT   0623510 (3/4" - 25mm) x 3/4" MIP NPT   0623512 (1" - 32mm) x 3/4" MIP NPT   0623514 (1" - 32mm) x 1" MIP NPT  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Transition Tee
 
CSA B137.11
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP   0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP   0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP   0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP  
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP   0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP   0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP   0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings¢ +++
 
MLTPL
 
Aquatherm Greenpipe® - Fusion Outlet
 
CSA B137.11
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP)   0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP)   0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP)   0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)  
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP)   0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP)   0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP)   0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)  
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP)   0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP)   0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP)   0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)  
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP)   0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP)   0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP)   0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)  
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP)   0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP)   0628260 (2.5" / 1" - 75 / 32mm x 1" FIP)   0628262 (3" / 1" - 90 / 32mm x 1" FIP)  
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP)   0628266 (4" x 1" - 125 / 32mm x 1" FIP)   0628270 (6" / 1" - 160 / 32mm x 1" FIP)   0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)  
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP)   0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP)   0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP)   0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)  
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP)   0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP)   0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP)   0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)  
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP)   0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP)   0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP)   0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)  
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP)   0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP)   0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP)   0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP)  

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Socket
 
ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducer
 
ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0311184 (200/160 mm)
0311188 (250/160 mm)
0311190 (250/200 mm)
0311192 (315/200 mm)
0311194 (315/250 mm)
0311196 (355/250 mm)
0311198 (355/315 mm)
0111174 (160/110 mm) SDR 7.4
0111176 (160/125 mm) SDR 7.4
0111184 (200/160 mm) SDR 7.4
0111190 (250/200 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111185 (200/160 mm) SDR 11
0111191 (250/200 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducing Socket
 
ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm)
0311174 (160/110 mm)
0311176 (160/125 mm)
0311182 (200/125 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Elbow 45°
 
ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112534 (200 mm) SDR 7.4
0112538 (250 mm) SDR 7.4
7212530 (160 mm) SDR 9
7212534 (200 mm) SDR 9
7212538 (250 mm) SDR 9
7521542 (315 mm) SDR 9
7512544 (355 mm) SDR 9
0112531 (160 mm) SDR 11
0112535 (200 mm) SDR 11
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112712 (32 mm Internal/External)
0112710 (25 mm Internal/External)
0112714 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Elbow 90°
 
ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0312130 (160 mm)
0312134 (200 mm)
0312138 (250 mm)
7212142 (315 mm)
7212144 (355 mm)
0112130 (160 mm) SDR 7.4
0112134 (200 mm) SDR 7.4
0112138 (250 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112135 (200 mm) SDR 11
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Tee
 
ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0813134 (200 mm)
0813138 (250 mm)
0813142 (315 mm)
0813144 (355 mm)
0113130 (160 mm) SDR 7.4
0113134 (200 mm) SDR 7.4
0113138 (250 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113135 (200 mm) SDR 11
0113139 (250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Reducing Tee
 
ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0813600 (160 mm x 160 mm x 75mm)
0813602 (160 mm x 160 mm x 90mm)
0813608 (200 mm x 200 mm x 75mm)
0813610 (200 mm x 200 mm x 90mm)
0813612 (200 mm x 200 mm x 110mm)
0813614 (200 mm x 200 mm x 125mm)
0813618 (200 mm x 200 mm x 160mm)_
0813624 (250 mm x 250 mm x 75mm)
0813626 (250 mm x 250 mm x 90mm)
0813628 (250 mm x 250 mm x 110mm)
0813630 (250 mm x 250 mm x 125mm)
0813634 (250 mm x 250 mm x 160mm)
0813640 (250 mm x 250 mm x 200mm)
0813904 (315 mm x 315 mm x 125mm)
0813906 (315 mm x 315 mm x 160mm)
0813908 (315 mm x 315 mm x 200mm)
0813910 (315 mm x 315 mm x 250mm)
0813916 (355 mm x 355 mm x 125mm)
0813918 (355 mm x 355 mm x 160mm)
0813920 (355 mm x 355 mm x 200mm)
0813922 (355 mm x 355 mm x 250mm)
0813924 (355 mm x 355 mm x 315mm)
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cross
 
ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® End Cap
 
ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11
0314130 (160 mm)
0314134 (200 mm)
0314138 (250 mm)
0314142 (315 mm)
0314144 (355 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm)
0315265 (315 mm x 160mm)
0315271 (355 mm x 160mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings$ * +++
 
PP
 
Aquatherm greenpipe® Flange Adapter
 
ASTM F2389
0115430 (6") SDR 7.4
0115431 (6") SDR 11
0115434 (8") SDR 7.4
0115435 (8") SDR 11
0115438 (10") SDR 7.4
0115439 (10") SDR 11
0015443 (12") SDR 11
0015445 (14") SDR 11
0015447 (16") SDR 11
0015449 (18") SDR 11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11
0315530 (160 mm) SDR 9
0315534 (200 mm) SDR 9
0315538 (250 mm) SDR 9
0315542 (315 mm) SDR 9
0315544 (355 mm) SDR 9

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings$ * +++
 
PP
 
Aquatherm greenpipe® Flange
 
ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm)

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Coupling Screw
 
ASTM F2389
0115812 (Joint - Brass - 32 mm)
0115814 (Joint - Brass - 40 mm)
0115816 (Joint - Brass - 50 mm)
0115818 (Joint - Brass - 63 mm)
0115820 (Joint - Brass - 75 mm)
0115838 (Joint - PP - 20 mm)
0115840 (Joint - PP - 25 mm)
0115842 (Joint - PP - 32 mm)
0115844 (Joint - PP - 40 mm)
0115846 (Joint - PP - 50 mm)
0115848 (Joint - PP - 63 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Overbridgebow
 
ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Electrofusion
 
ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Back Plate Elbow
 
ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cavity Wall
 
ASTM F2389
0120114 (Fitting - 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Insulation
 
ASTM F2389
0120120 (Cleading for Wall Disk 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe®
 
ASTM F2389
0610308 (20 mm - Coil: 100 m) SDR 11
0610310 (25 mm - Coil: 100 m) SDR 11
0610312 (32 mm - Coil: 100 m) SDR 11
06100208 (20 mm) SDR 11
0610210 (25 mm) SDR 11
0610212 (32 mm) SDR 11
0610214 (40 mm) SDR 11
0610216 (50 mm) SDR 11
0610218 (63 mm) SDR 11
0610220 (75 mm) SDR 11
0610222 (90 mm) SDR 11
0610224 (110 mm) SDR 11
0610226 (125 mm) SDR 11
0610230 (160 mm) SDR 11
0610234 (200 mm) SDR 11
0610238 (250 mm) SDR 11
10242 (315 mm) SDR 11
10244 (355 mm) SDR 11
10246 (400 mm) SDR 11
10248 (450 mm) SDR 11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Pipe& * +++
 
PP
 
Aquatherm greenpipe® Faser
 
ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Cavity Wall Disk
 
ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Piece
 
ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter - Round
 
ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter - Hex
 
ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Elbow
 
ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Transition Tee
 
ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Connecting Union
 
ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Water Meter Union
 
ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Adapter
 
ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2")

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Counterpart for
 
ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Fusion Outlet (Saddle)
 
ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Distribut. Block
 
ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® 4-Port Manifold
 
ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F)

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++
 
PP
 
Aquatherm greenpipe® Globe Valve
 
ASTM F2389
0140808 (20 mm)