NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 9, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=ASTM+D3350&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Borealis AB | |
| SE 444 86 Stenungsund | |
| Sweden | |
| 46 303 860 00 | |
| Visit this company's website |
Facility : Stenungsund, Sweden
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710# + | 3 | BorSafe™ HE3490-LS-H | ASTM D3350 445576C |
| PE 100# + | 3 | BorSafe™ HE3490-LS-H | ASTM D3350 445576C |
# Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
* Use of this material in NSF Certified tubing requires NSF's prior authorization. Tubing
produced from this material was tested to the performance requirements of ASTM F876.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
|||
| Braskem Idesa SAPI | |
| Manuel Ávila Camacho, No. 36, Piso 24, | |
| Lomas de Chaultepec II Sección, Delegaci | |
| Ciudad de Mexico 11000 | |
| Mexico | |
| 52 556 234 1100 | |
| Visit this company's website |
Facility : Veracruz, Mexico
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 100+ | 1 | HDP3049 | ASTM D3350 445574A |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
|||
| Chevron Phillips Chemical Company, LP | |
| 10001 Six Pines Drive | |
| The Woodlands, TX 77380 | |
| United States | |
| 832-813-4100 | |
| Visit this company's website |
Facility : # 2 Houston, TX
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710$ * + ^ | 3 | Marlex H516HPY | ASTM D3350 445574E |
$ This product also meets the requirements for PE 3408 per ASTM D3350-02a. * Use of this material in NSF Certified tubing requires NSF's prior authorization. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. |
|||
Facility : Sweeny, TX
Drain, Waste, and Vent, Continuous Waste, and Sewer Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710 | 3 | Marlex® H516HP BK | ASTM D3350 445574C |
| PE 4710 | 3 | Marlex® TRB-432 BK | ASTM D3350 445574C |
| PE 4710 | 3 | Marlex® TRB-437LS BK | ASTM D3350 445574C |
| PE 100 | 3 | Marlex® TRB-437LS BK | ASTM D3350 445576C |
| PE 4710 | 3 | Marlex® TRB-437LS G1 | ASTM D3350 445574C |
| PE 100 | 3 | Marlex® TRB-437LS G1 | ASTM D3350 445576C |
| PE 4710 | 3 | Marlex® TRB-437LS NT | ASTM D3350 445574A |
| PE 100 | 3 | Marlex® TRB-437LS NT | ASTM D3350 445576A |
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710$ + ^ ¢ | 3 | Marlex® H516HP BK | ASTM D3350 445574C |
| PE 4710$ + ^ ¢ | 3 | Marlex® TRB-432 BK | ASTM D3350 445574C |
| PE 4710$ & + ¢ | 3 | Marlex® TRB-432YL1 | ASTM D3350 445574E |
| PE 4710$ + ^ ¢ | 3 | Marlex®TRB-432YL1 | ASTM D3350 445576E |
| PE 4710$ + ^ ¢ | 3 | Marlex® TRB-437LS BK | ASTM D3350 445574C |
| PE 100$ + ^ ¢ | 3 | Marlex® TRB-437LS BK | ASTM D3350 445576C |
| PE 4710$ & + ¢ | 3 | Marlex® TRB-437LS G1 | ASTM D3350 445574C |
| PE 4710$ & + ¢ | 3 | Marlex® TRB-437LS G1 | ASTM D3350 445576C |
| PE 4710$ + ^ ¢ | 3 | Marlex® TRB-437LS NT | ASTM D3350 445574A |
| PE 4710$ + ^ ¢ | 3 | Marlex® TRB-437LS NT | ASTM D3350 445576A |
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. & Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
| Dow Chemical Company (The) | |
| Regulatory Compliance | |
| 1803 Building | |
| Midland, MI 48674 | |
| United States | |
| 979-238-5209 | |
| Visit this company's website |
Facility : Hahnville, LA
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 2708/80* [1] | 3 | Continuum™ DGDA-2420 YL | ASTM D3350 237373E |
| PE 4710* | 3 | Continuum™ DGDA-2490 YL2 | ASTM D3350 445574E |
| PE 100* | 3 | Continuum™ DGDA-2490 YL2 | ASTM D3350 445576E |
| PE 4710* | 3 | Continuum™ DGDA-2490 YL | ASTM D3350 445574E |
| PE 4710* | 3 | Continuum™ DGDA-2490 NT | ASTM D3350 445574A |
| PE 4710* | 3 | Continuum™ DGDA-2490 Black | ASTM D3350 445574C |
| PE 100* | 3 | Continuum™ DGDA-2490 Black | ASTM D3350 445576C |
| PE 4710* | 3 | Continuum™ DGDA-2490 BK GL | ASTM D3350 445574C |
| PE 4710* | 3 | Continuum DGDC-2490 YL2 | ASTM D3350 445574E |
| PE 4710* | 3 | Continuum™ DGDC-2490 BK | ASTM D3350 445574C |
| PE 2708/80* [1] [2] | 3 | Continuum™ DGDA-2420 YL2 | ASTM D3350 277373E |
| PE 100* | 3 | Continuum™ DGDA-2490 BK GL | ASTM D3350 445576C |
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. [1] Flexural modulus is 95,000 - 125,000 psi. [2] Melt index is 0.05 - 0.25 g/10 min. |
|||
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710+ ^ | 3 | Continuum™ DGDA-2490 BK GL | ASTM D3350 445574C |
| PE 100+ ^ | 3 | Continuum™ DGDA-2490 BK GL | ASTM D3350 445576C |
| PE 4710+ ^^^ | 3 | Continuum™ DGDA-2490 BL | ASTM D3350 445574E |
| PE 4710+ ^^ | 3 | Continuum™ DGDA-2490 Black | ASTM D3350 445574C |
| PE 100+ ^^ | 3 | Continuum™ DGDA-2490 Black | ASTM D3350 445576C |
| PE 4710+ ^ | 3 | Continuum™ DGDA-2490 GY | ASTM D3350 445574E |
| PE 4710+ ^^ | 3 | Continuum™ DGDA-2490 NT | ASTM D3350 445574A |
| PE 4710+ ^^^ | 3 | Continuum™ DGDA-2490 White | ASTM D3350 445574E |
| PE 4710+ ^^ | 3 | Continuum™ DGDA-2492 Black | ASTM D3350 445574C |
| PE 100+ ^^ | 3 | Continuum™ DGDA-2492 Black | ASTM D3350 445576C |
| PE 100+ ^^ | 3 | Continuum™ DGDA-2502 Black | ASTM D3350 445576C |
| PE 4710+ ^^ | 3 | Continuum™ DGDA-2502 Black | ASTM D3350 445574C |
| PE 4710+ ^^ | 3 | Continuum™ DGDA-2502 NT | ASTM D3350 445574A |
| PE 100+ ^^ | 3 | Continuum™ DGDB-2490 Black | ASTM D3350 445576C |
| PE 4710+ ^^ | 3 | Continuum™ DGDB-2490 Black | ASTM D3350 445574C |
| PE 4710+ ^ | 3 | Continuum™ DGDB-2490 NT | ASTM D3350 445574A |
| PE 4710+ ^^ | 3 | Continuum™ DGDC-2480 Black | ASTM D3350 445574C |
| PE 4710+ ^^ | 3 | Continuum™ DGDC-2480 NT | ASTM D3350 445574A |
| PE 4710+ ^^ | 3 | Continuum™ DGDC-2482 Black | ASTM D3350 445574C |
| PE 4710+ ^^ | 3 | Continuum™ DGDC-2482 NT | ASTM D3350 445574A |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2490 BK | ASTM D3350 445574C |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2490 BL | ASTM D3350 445574E |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2490 NT | ASTM D3350 445547A |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2490 WH | ASTM D3350 445574E |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2492 BK | ASTM D3350 445574C |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2502 Black | ASTM D3350 445574C |
| PE 100+ ^^^ | 3 | Continuum™ DGDC-2502 Black | ASTM D3350 445574C |
| PE 4710+ ^^^ | 3 | Continuum™ DGDC-2502 NT | ASTM D3350 445574A |
| PE 4710+++ ^^^ | 3 | HYPERTHERM 2399 Black | ASTM D3350 445574C |
| PE-RT 4710+++ ^^^ | 3 | HYPERTHERM 2399 NT | ASTM D3350 445574A |
| PE 4710+++ ^^^ | 3 | INTREPID 2499 BK | ASTM D3350 445574C |
% Meets the chlorine resistance requirements of ASTM F2769 (CL5) when tested in accordance
with ASTM F2023.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350.
^^ Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
^^^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
|
|||
Facility : North Seadrift, TX
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 100* | 3 | CONTINUUM™ DGDA-2490 Black | ASTM D3350 445574C |
| PE 4710* | 3 | CONTINUUM™ DGDA-2490 Black | ASTM D3350 445574C |
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. |
|||
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710* + ^^ | 3 | CONTINUUM™ DGDA-2490 Black | ASTM D3350 445574C |
| PE 100* + ^^ | 3 | CONTINUUM™ DGDA-2490 Black | ASTM D3350 445576C |
| PE 3608* + ^ | 3 | CONTINUUM™ DGDB-2480 Black | ASTM D3350 345464C |
| PE 3608* + ^ | 3 | CONTINUUM™ DGDB-2480 NT | ASTM D3350 345464A |
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ^^ Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. |
|||
Facility : Schkopau, Germany
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 2708* +++ [1] [2] | 1 | Dowlex® 2344 | ASTM D3350 227273A |
| PE 80* +++ [3] [4] | 1 | Dowlex® 2388 | ASTM D3350 227375 |
* 180°F
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Flexural modulus is 65,000 - 95,000 psi
[2] Material meets the chlorine resistance requirement of ASTM F2623 when tested in
accordance with ASTM F2023.
[3] Material meets the requirement for ASTM F2769 chlorine resistance designation code CL5
class, when tested in accordance with ASTM F2023 test method.
[4] Flexural modulus is 90,000 - 140,000 psi.
|
|||
Facility : Terneuzen, The Netherlands
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 2708* +++ [1] [2] | 1 | Dowlex® 2344 | ASTM D3350 227273A |
| PE 80* +++ [3] [4] | 1 | Dowlex® 2388 | ASTM D3350 227375 |
* 180°F
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[1] Flexural modulus is 65,000 - 95,000 psi
[2] Material meets the chlorine resistance requirement of ASTM F2623 when tested in
accordance with ASTM F2023.
[3] Material meets the requirement for ASTM F2769 chlorine resistance designation code CL5
class, when tested in accordance with ASTM F2023 test method.
[4] Flexural modulus is 90,000 - 140,000 psi.
|
|||
| Equistar Chemicals, LP, a wholly-owned subsidiary of LyondellBasell | |
| Polymers Division | |
| 1221 McKinney Street, Suite 1600 | |
| P.O. Box 2583 | |
| Houston, TX 77252-2583 | |
| United States | |
| 713-652-7200 | |
| Visit this company's website |
Facility : Bay City, TX
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710# * | 3 | Alathon® L4904 Black | ASTM D3350 445574C |
| PE 100# * | 3 | Alathon® L4904 Black | ASTM D3350 445586C |
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. * Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710# + ¢ ^^^ | 3 | Alathon L4904LSC- Black | ASTM D3350 445574C |
| PE 100# + ^^^ | 3 | Alathon L4904LSC- Black | ASTM D3350 445576C |
| PE 4710# + ^^^ | 3 | Alathon® L4904-Black | ASTM D3350 445574C |
| PE 100# + ^^^ | 3 | Alathon® L4904-Black | ASTM D3350 445576C |
| PE 100# + ^ | 3 | Alathon® L4904-Black | ASTM D3350 445576C |
| PE 4710# + ^ | 3 | Alathon® L4904-Black | ASTM D3350 445574C |
| PE 4710# + ^^^ | 3 | Alathon® L4904LS-Black | ASTM D3350 445574C |
| PE 100# + ^^^ | 3 | Alathon® L4904LS-Black | ASTM D3350 445576C |
| PE 4710# + ^ | 3 | Alathon® L4904LS-Black | ASTM D3350 445574C |
| PE 4608# + ^ | 3 | Alathon® L5008 Blue | ASTM D3350 445564E |
| PE 4608# + ^ | 3 | Alathon® L5008 HP Natural | ASTM D3350 445564A |
| PE 4608# + ^ | 3 | Alathon® L5008 HP Natural UV | ASTM D3350 445564D |
| PE 4710# + ^ | 3 | Alathon® L5008 HP-Blue | ASTM D3350 445574E |
| PE 4608# + ^ | 3 | Alathon® L5008 HP-Blue | ASTM D3350 445564E |
| PE 4608# + ^ | 3 | Alathon® L5008 Natural | ASTM D3350 445564A |
| PE 4608# + ^ | 3 | Alathon® L5008 Natural UV | ASTM D3350 445564D |
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC0 (unspecified) per Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ^^^ Material has a chlorine resistance rating of CC3 per Table 2 of ASTM D3350. |
|||
^^ Material has a chlorine resistance rating of CC1 per Table 2 of ASTM D3350. ^^^^ Material has a chlorine resistance rating of CC2 per Table 2 of ASTM D3350
Facility : La Porte, TX
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710 PLUS* | 3 | Hyperzone HY4008 Black | ASTM D3350 445584C |
| PE 100* | 3 | Hyperzone HY4008 Black | ASTM D3350 445586C |
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 100# * + ^ | 3 | Hyperzone HY4008 Black | ASTM D3350 445586C |
| PE 4710# * + ^ | 3 | Hyperzone HY4008 Black | ASTM D3350 445584C |
| PE 100# * + ^ | 3 | HYPERZONE HY4008LSC Black | ASTM D3350 445576C |
| PE 4710# * + ^ | 3 | HYPERZONE HY4008LSC-Black | ASTM D3350 445574C |
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. * Material has a chlorine resistance rating of CC3 per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Product is authorized to bear the cNSF and or/ the CNSFus Mark. |
|||
| ExxonMobil Product Solutions Company | |
| 22777 Springwoods Village Parkway | |
| Spring, TX 77389 | |
| United States | |
| 832-624-9114 |
Facility : Mont Belvieu, TX
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710* | 1 | HD4710.09 BK | ASTM D3350 445574C |
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization |
|||
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710+ ^ [1] | 1 | HD4710.09 BK | ASTM D3350 445574C |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC0 (unspecified) per Table 2 of ASTM D3350 when tested in accordance with ASTM F2263 [1] Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. |
|||
| Formosa Plastics Corporation, Texas | |
| 201 Formosa Drive | |
| P.O. Box 700 | |
| Point Comfort, TX 77978 | |
| United States | |
| 361-987-7960 |
Facility : Point Comfort, TX
Gas Applications - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 2708 | 1 | E6210C BLK2 | ASTM D3350 234373E |
| PE 2708 | 1 | E6210C BLK2 | ASTM D3350 234373E |
| PE 2708 | 1 | E6210 C BLK | ASTM D3350 234373E |
| PE 2708 | 1 | E6210F2 BLK | ASTM D3350 234373E |
| PE 2708 | 1 | E6210F2 BLK | ASTM D3350 234373E |
| PE 2708 | 1 | HP3902 YL2 | ASTM D3350 234373E |
| PE 2708 | 1 | HP3902/PO2240 | ASTM D3350 234373E |
| PE 2708 | 1 | HP3902/YL PE2708 | ASTM D3350 234373E |
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710# ++ | 1 | DE6210A | ASTM D3350 445574C |
| PE 100# ++ | 1 | DE6210A | ASTM D3350 445576C |
| PE 100# ++ | 1 | DE6210A/E6210A | ASTM D3350 445576C |
| PE 4710# ++ | 1 | DE6210A/E6210A | ASTM D3350 445574C |
| PE 4710# ++ | 1 | E6210A | ASTM D3350 445574C |
| PE 4710# ++ | 1 | E6210A | ASTM D3350 445576C |
| PE 100# ++ | 1 | E6210A-MD53542 | ASTM D3350 445576C |
| PE 4710# ++ | 1 | E6210A-MD53542 | ASTM D3350 445574C |
| PE 100# ++ | 1 | E6210A-PO2107 | ASTM D3350 445576C |
| PE 4710# ++ | 1 | E6210A-PO2107 | ASTM D3350 445574C |
| PE 4710## ++ | 1 | E6210C BLK | ASTM D3350 445574C |
| PE 4710++ ### | 1 | E6210F2 BLK | ASTM D3350 445574C |
| PE 4710++ ### | 1 | E6210F2/MD53542 | ASTM D3350 445574C |
| PE 4710# ++ | 1 | Formolene DE6210A | ASTM D3350 445574C |
| PE 100# ++ | 1 | Formolene DE6210A | ASTM D3350 445576C |
| PE 100# ++ | 1 | Formolene DE6210A/E6210A | ASTM D3350 445576C |
| PE 4710# ++ | 1 | Formolene DE6210A/E6210A | ASTM D3350 445574C |
| PE 4710# ++ | 1 | Formolene E6210A | ASTM D3350 445574C |
| PE 100# ++ | 1 | Formolene E6210A | ASTM D3350 445576C |
| PE 3608& + ^ ¢ | 1 | Formolene HP4401 | ASTM D3350 345464C |
| PE 3608& + ^ ¢ | 1 | HP4401/AS4642 | ASTM D3350 345464C |
| PE 3608& + ^ ¢ | 1 | HP4401/AS4692 | ASTM D3350 345464C |
| PE 3608& + ^ ¢ | 1 | HP4401/MDPE-535-42 | ASTM D3350 345464C |
# Meets the chlorine resistance requirements of CC1 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
& Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350.
* Meets the material requirements of CSA B137.3
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Meets the material requirements of CSA B137.1
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
## Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
### Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested
in accordance with ASTM F2263.
|
|||
| Ineos Olefins and Polymers USA, a Division of Ineos USA LLC. | |
| Marina View Building | |
| 2600 South Shore Boulevard | |
| Suite 500 | |
| League City, TX 77573 | |
| United States | |
| 800-338-0489 | |
| 713-307-3760 | |
| Visit this company's website |
Facility : # 2 Houston, TX
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 100^ ++ | 3 | TUB 121B | ASTM D3350 445576C |
| PE 4710^ ++ | 3 | TUB 121B | ASTM D3350 445574C |
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
|||
Facility : # 3 USA
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 100^ ++ | 3 | TUB 121B | ASTM D3350 445576C |
| PE 4710^ ++ | 3 | TUB 121B | ASTM D3350 445574C |
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
|||
Facility : La Porte, TX
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 3608& + ** | 3 | K44-15-122 | ASTM D3350 345464A |
| PE 3608& + | 3 | K44-15-123 | ASTM D3350 345464C |
| PE 3608& + | 1 | K44-15-186 | ASTM D3350 345464E |
| PE 100^ ++ | 3 | TUB 121 | ASTM D3350 445576C |
| PE 4710^ ++ | 3 | TUB 121 | ASTM D3350 445574C |
| PE 4710^ ** ++ | 3 | TUB121N Natural | ASTM D3350 445574A |
| PE 4710^ ++ | 3 | TUB 124 Blue | ASTM D3350 445574E |
& Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ** Natural Material ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
|||
| INEOS Services Belgium SA | |
| Rue de Ransbeek, 310 | |
| 1120 Brussels | |
| Belgium | |
| 32 2264 2498 | |
| Visit this company's website |
Facility : Antwerpen, Belgium
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
|
Potable Water - Materials |
|||
| PE 100+ ^ [1] | 1, 2 | ELTEX Superstress TUB121N6000 | ASTM D3350 447576C |
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC3 of ASTM D3350. [1] Flexural modulus is 135,000 - 185,000 psi |
|||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Saudi Arabian Basic Corporation (SABIC) | |
| P.O. Box 5101 | |
| Riyadh 11422 | |
| Saudi Arabia | |
| 966 1225 8000 | |
| Visit this company's website |
Facility : Al Jubail, Saudi Arabia
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 100^ ** ++ | 1 | P6006AD | ASTM D3350 445574C |
| PE 4710^ ** ++ | 1 | P6006AD | ASTM D3350 445574C |
| PE 4710^ ++ | 1 | P6006NA | ASTM D3350 445574A |
| PE 4710^ ++ [1] | 1 | P6006NA/PE-535-42 | ASTM D3350 445574C |
^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ** Black material. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Salt/Pepper blend. |
|||
Facility : Yanbu, Saudi Arabia
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710^ ** ++ [2] | 1 | P6006N | ASTM D3350 447574A |
| PE 4710^ ++ [1] [2] | 1 | P6006N/IPBK010A | ASTM D3350 447574C |
| PE 4710^ ++ [1] [2] | 1 | P6006N/PE-535-42 | ASTM D3350 447574C |
^ Material listed to ASTM D3350 and CSA B137.1 with a cell class of 447574A or 447574C. Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ** Natural material. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Salt/Pepper blend. [2] Flexural modulus is 130,000 - 180,000 psi. |
|||
| Thai Polyethylene Co., Ltd. | |
| 10 I-1 Road Map Ta Phut Industrial | |
| Estate, Muang District | |
| Rayong 21150 | |
| Thailand | |
| 66 3868 3393 | |
| Visit this company's website |
Facility : Muang Rayong, Thailand
Potable Water - Materials
| Material Type | End Use | Trade Name | Product Standard |
| PE 4710# + | 3 | SCGC HDPE H112PC | ASTM D3350 445574C |
| PE 100# + | 3 | SCGC HDPE H112PC | ASTM D3350 445576C |
# Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
|||
NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems
Water-Based Ground-Source “Geothermal” Heat Pump Systems
| Chevron Phillips Chemical Company, LP | |
| 10001 Six Pines Drive | |
| The Woodlands, TX 77380 | |
| United States | |
| 832-813-4100 | |
| Visit this company's website |
Facility : Sweeny, TX
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 4710 |
Marlex® TRB-432 BK |
ASTM D3350 445574C |
| Dow Chemical Company (The) | |
| Regulatory Compliance | |
| 1803 Building | |
| Midland, MI 48674 | |
| United States | |
| 979-238-5209 | |
| Visit this company's website |
Facility : Hahnville, LA
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 4710 |
Continuum™ DGDA-2490 Black |
ASTM D3350 445574C |
|||
Material |
PE 4710 |
Continuum™ DGDA-2490 BL |
ASTM D3350 445574E |
|||
Material |
PE 4710 |
Continuum™ DGDC-2480 Black |
ASTM D3350 445574C |
Facility : North Seadrift, TX
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 3608 |
CONTINUUM™ DGDB-2480 Black |
ASTM D3350 345464C |
| Equistar Chemicals, LP, a wholly-owned subsidiary of LyondellBasell | |
| Polymers Division | |
| 1221 McKinney Street, Suite 1600 | |
| P.O. Box 2583 | |
| Houston, TX 77252-2583 | |
| United States | |
| 713-652-7200 | |
| Visit this company's website |
Facility : Bay City, TX
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 4710 |
Alathon® L4904 Black |
ASTM D3350 445574C |
Facility : La Porte, TX
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 4710 PLUS |
Hyperzone HY4008 Black |
ASTM D3350 445584C |
|||
Material |
PE 4710 |
Hyperzone HY4008LSC Black |
ASTM D3350 445574C |
| Formosa Plastics Corporation, Texas | |
| 201 Formosa Drive | |
| P.O. Box 700 | |
| Point Comfort, TX 77978 | |
| United States | |
| 361-987-7960 |
Facility : Point Comfort, TX
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 4710 |
Formolene DE6210A/E6210A |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
E6210C BLK |
ASTM D3350 445574C |
|||
Material |
PE 4710 |
DE6210A/E6210A |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
Formolene E6210A |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
Formolene DE6210A |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
DE6210A |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
E6210A |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
E6210A-MD5342 |
ASTM D3350 445576C |
|||
Material |
PE 4710 |
E6210A-PO2107 |
ASTM D3350 445576C |
| Ineos Olefins and Polymers USA, a Division of Ineos USA LLC. | |
| Marina View Building | |
| 2600 South Shore Boulevard | |
| Suite 500 | |
| League City, TX 77573 | |
| United States | |
| 800-338-0489 | |
| 713-307-3760 | |
| Visit this company's website |
Facility : La Porte, TX
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Material |
PE 4710 |
Tub 121 |
ASTM D3350 445574C |
|||
Material |
PE 3608 |
K44-15-123 |
ASTM D3350 345464C |
Number of matching Manufacturers is 16
Number of matching Products is 172
Processing time was 1 seconds
