NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 9, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=AWWA+C901&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Advanced Drainage Systems, Inc. |  |
| 4640 Trueman Boulevard | |
| Hilliard, OH 43026 | |
| United States | |
| 800-733-7473 | |
| 614-658-0050 | |
| Visit this company's website |
Facility : Bakersfield, CA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
ADS PolyFlex 4710 |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Vicksburg, MS
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
ADS PolyFlex 4710 |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Harrisonville, MO
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
ADS PolyFlex 4710 |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Findlay, OH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
ADS PolyFlex 4710 |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : London, OH
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
ADS PolyFlex 4710 |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Ennis, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
ADS PolyFlex 4710 |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Atkore HDPE Pipe & Conduit |  |
| 4707 East Kearney Street | |
| Springfield, MO 65803 | |
| United States | |
| 417-708-9887 | |
| Visit this company's website |
Facility : Springfield, MO
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
Base-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
Water-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
Crystal-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Albuquerque, NM
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
Base-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
Water-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
Crystal-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Allendale, SC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
Base-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
Water-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
Crystal-Line |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Centennial Plastics, Inc. |  |
| 1830 Centennial Avenue | |
| P.O. Box 329 | |
| Hastings, NE 68901 | |
| United States | |
| 866-851-2227 | |
| 402-462-2227 | |
| Visit this company's website |
Facility : Nampa, ID
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § |
PE 3608/4710 |
CenCore HDPE |
AWWA C901 |
|||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 3/4" - 2" SIDR 11.5 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe+ § |
PE 3608/4710 |
CenCore HDPE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe+ § |
PE 4710 |
CenFlo HDPE |
AWWA C901 |
|||
| 3/4" - 2" SIDR 11.5 | ||||||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe+ § |
PE 3608/4710 |
CenFlo HDPE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Pipe+ § |
PE 3608/4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Geothermal Applications
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
Pipe |
PE 4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
Facility : Hastings, NE
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § [G] |
PE 3608/4710 |
CPL HDPE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 3608/4710 |
CPL Potable Water |
AWWA C901 |
|||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ § [G] |
PE 3608/4710 |
CenCore HDPE |
AWWA C901 |
|||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
| 3/4" - 2" SIDR 11.5 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ § [G] |
PE 4710 |
CenFlo HDPE |
AWWA C901 |
|||
| 3/4" - 2" SIDR 7 | ||||||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
CenFlo HDPE |
AWWA C901 |
|||
| 3/4" - 2" SIDR 11.5 | ||||||
| 2" SIDR 15 | ||||||
| 2" SIDR 19 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ § [G] |
PE 3608/4710 |
CenCore HDPE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ § [G] |
PE 3608/4710 |
CenFlo HDPE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 3608/4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Geothermal Applications
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
Pipe |
PE 4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 3" SDR 7 | ||||||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 3" SDR 11 | ||||||
| 3/4" - 3" SDR 13.5 | ||||||
| 2" - 3" SDR 17 | ||||||
| 2" - 3" SDR 21 | ||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Cresline Plastic Pipe Co., Inc. | |
| 600 Cross Pointe Boulevard |  |
| Evansville, IN 47715 | |
| United States | |
| 270-826-8317 |
Facility : Council Bluffs, IA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing+ [G] |
PE 4710 |
Cresline® HD-CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ [G] |
PE 4710 |
Cresline® CE Blue® |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Henderson, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing+ [G] |
PE 4710 |
Cresline® CE Blue® |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ [G] |
PE 4710 |
Cresline® HD-CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Mechanicsburg, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing+ [G] |
PE 4710 |
Cresline® CE Blue® |
AWWA C901 |
|||
| 3/4" - 2" SIDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ [G] |
PE 4710 |
Cresline® HD-CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Encoma Ltd. | |
| 26082 Road 51 North | |
| P.O. Box 219 | |
| Elm Creek, MB R0G 0N0 | |
| Canada | |
| 204-745-8920 | |
| Visit this company's website |
Facility : Elm Creek, Manitoba, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
Encoma |
AWWA C901 |
|||
| 3/4" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
| Endot Industries, Inc. | |
| 60 Green Pond Road | |
| Rockaway, NJ 07866 | |
| United States | |
| 800-443-6368 | |
| 973-625-8500 | |
| Visit this company's website |
Facility : Rockaway, NJ
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
ENDOT |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
* The trade designation "Endot" may or may not be followed by any of the following
designations:
ENDOPLUS, ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM,
GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY,
ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Pryor Creek, OK
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
ENDOT |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
* The trade designation "Endot" may or may not be followed by any of the following
designations:
ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM, GOLDEN JET,
SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY, ENDOT/YARDLEY,
ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : Greeneville, TN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
ENDOT |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
* The trade designation "Endot" may or may not be followed by any of the following
designations:
ENDOPLUS, ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM,
GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY,
ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Flying W Plastics Inc. |  |
| 487 Vanhorn Drive | |
| P.O. Box 759 | |
| Glenville, WV 26351 | |
| United States | |
| 304-462-5779 | |
| Visit this company's website |
Facility : Jacksonville, FL
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
FLYING W SPEC I |
AWWA C901 |
|||
| 3/4" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
FLYING W TITAN BLUE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Glenville, WV
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
FLYING W SPEC I |
AWWA C901 |
|||
| 3/4" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
FLYING W TITAN BLUE CTS |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Georg Fischer Central Plastics LLC | |
| 4949 Joseph Hardin Drive | |
| Dallas, TX 75236 | |
| United States | |
| 469-801-2246 |
Facility : Elizabethtown, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [1] [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Titusville, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Rapid City, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [1] [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cedar City, UT
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Infra Pipe Solutions Ltd. | |
| 6750 Century Avenue | |
| Unit 303 | |
| Mississauga, ON L5N 0B7 | |
| Canada | |
| 905-858-0206 | |
| Visit this company's website |
Facility : Huntsville, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ + |
PE 4710 |
Sclairpipe |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Saskatoon, Saskatchewan, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + |
PE 4710 |
Sclairpipe |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
| IPEX Incorporated |  |
| 3 Place Du Commerce, Suite 101 | |
| Île-Des-Soeurs | |
| Verdun, QC H3E 1H7 | |
| Canada | |
| 514-769-2200 | |
| Visit this company's website |
Facility : Edmonton, Alberta, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [G] |
PE 4710 |
IPEX Inc |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 (PC250) | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are NSF Certified.
| J-M Manufacturing Co., Inc. DBA JM Eagle |  |
| 9 Peach Tree Hill Road | |
| Livingston, NJ 07039 | |
| United States | |
| 310-693-8200 | |
| Visit this company's website |
Facility : # 1 Adel, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 8 Kingman, AZ
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 9 Magnolia, AR
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : # 11 Cochranton, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 15 Sunnyside, WA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Facility : # 17 Tulsa, OK
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [G] |
PE 4710 |
J-M Manufacturing |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
| Mexichem Soluciones Integrales S.A. de C.V. | |
| Avenida Paseo de la Reforma No. 483 PISO 47, | |
| Entre las calles de Rio Elba y Rio de la Plata | |
| Cuauhtemco, CDMX, 06500 | |
| Mexico | |
| 52 442 217 7970 |
Facility : Cuautitlán Izcalli, Mexico
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2480 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2490 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2492 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2502 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem E6210C |
AWWA C901 |
|||
| 3/4" - 3" SDR 7, 9, 11, 13.5 | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Modern Polymer Pipe and Extrusions, LLC | |
| 1655 Louisiana Street | |
| Beaumont, TX 77701 | |
| United States | |
| 800-231-8198 | |
| 409-504-4654 | |
| Visit this company's website |
Facility : Pasadena, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
HDPE 4710 Poly Pipe |
AWWA C901 |
|||
| 2" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 4710 |
HDPE 4710 Poly Pipe |
AWWA C901 |
|||
| 2" - 3" SDR 9 | ||||||
| Performance Pipe |  |
| A Div. of Chevron Phillips Chem Co., LP | |
| 8261 Belleview Drive | |
| Suite 110 | |
| Plano, TX 75024 | |
| United States | |
| 972-599-6600 | |
| Visit this company's website |
Facility : Hagerstown, MD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
DriscoPlex PW |
AWWA C901 |
|||
| 1 1/4" - 3" SDR 9 | ||||||
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Pipeline Plastics, LLC | |
| 1301 Solana Boulevard | |
| Suite 1440 | |
| Westlake, TX 76262 | |
| United States | |
| 940-627-9100 | |
| Visit this company's website |
Facility : Fair Bluff, NC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § [G] |
PE 4710 |
Pipeline Plastics |
AWWA C901 |
|||
| 1" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Belle Fourche, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § [G] |
PE 4710 |
Pipeline Plastics |
AWWA C901 |
|||
| 1" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Decatur, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § [G] |
PE 4710 |
Pipeline Plastics |
AWWA C901 |
|||
| 1" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Levelland, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § [G] |
PE 4710 |
Pipeline Plastics |
AWWA C901 |
|||
| 1" - 3" DR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Poly Technology (Polytech) | |
| (A Granse Company) | |
| Airlake Industrial Park | |
| 21670 Hamburg Avenue | |
| Lakeville, MN 55044 | |
| United States | |
| 612-469-2198 |
Facility : Lakeville, MN
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [1] [G] |
PE 4710 |
PolyTech |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest,
Excel Fusion or WSLP Fusion.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Tubing+ [1] [G] |
PE 4710 |
PolyTech |
AWWA C901 |
|||
| 3/4" - 2" CTS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest,
Excel Fusion or WSLP Fusion.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
$ This product also meets the requirements for PE 3408 pipe tested in accordance with ASTM 3350-02a.
Geothermal Applications
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe[1] |
PE 4710 |
PolyTech |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
| 3/4" - 2" CTS SDR 9 Tubing | ||||||
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest,
WSLP Fusion or Excel Fusion.
|
||||||
| Polytubes 2009 Inc. | |
| 16221 - 123 Avenue | |
| Edmonton, AB T5V 1N9 | |
| Canada | |
| 780-453-2211 | |
| Visit this company's website |
Facility : Edmonton, Alberta, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ ++ |
PE 4710 |
PT BLUE47 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT D447 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT-I47 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Facility : Peterborough, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ ++ |
PE 4710 |
PT BLUE47 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT D447 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT-I47 |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
| Teel Plastics Inc. | |
| 1060 Teel Court | |
| Baraboo, WI 53913 | |
| United States | |
| 608-355-3080 | |
| Visit this company's website |
Facility : Baraboo, WI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
| Trinus Pipes & Tubes Ltd. | |
| 699 Welham Road | |
| Barrie, ON L4N 6C5 | |
| Canada | |
| 705-721-0216 |
Facility : Barrie, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ~ [G] |
PE 4710 |
Trinus Pipes & Tubes Ltd. |
AWWA C901 |
|||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
~ This product may be marked with an alternate tradename: Tridrop.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Versaprofiles Product Inc. | |
| 154 Principale Street | |
| Saint-Lazare de Bellechasse, QC G0R 3J0 | |
| Canada | |
| 877-335-7473 | |
| 418-883-2036 |
Facility : Saint-Lazare de Bellechasse, Québec, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing+ § |
PE 4710 |
Versapipe HD100PW |
AWWA C901 |
|||
| 3/4" - 3" SIDR 9 | ||||||
| 3/4" - 3" SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
| WL Plastics Corporation |  |
| 3575 Lone Star Circle | |
| Suite 300 | |
| Fort Worth, TX 76177 | |
| United States | |
| 682-831-2727 | |
| Visit this company's website |
Facility : Elizabethtown, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [1] [G] |
PE 4710 |
WL Plastics KY / WLP KY |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] These pipe sizes are not certified for use in potable water applications containing
oxidizing disinfectants and shall not be marked with a CC oxidative resistance
classification.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Titusville, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe+ |
PE 4710 |
WL Plastics PA/WLP PA Blue |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Rapid City, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
WL Plastics SD / WLP SD |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cedar City, UT
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
WL Plastics UT / WLP UT |
AWWA C901 |
|||
| 3/4" - 3" IPS SDR 9 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems
Water-Based Ground-Source “Geothermal” Heat Pump Systems
| Centennial Plastics, Inc. | |
| 1830 Centennial Avenue | |
| P.O. Box 329 | |
| Hastings, NE 68901 | |
| United States | |
| 866-851-2227 | |
| 402-462-2227 | |
| Visit this company's website |
Facility : Nampa, ID
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe% |
PE 3608/4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 2" SDR 7 | ||||||
| 3/4" - 2" SDR 9 | ||||||
| 3/4" - 2" SDR 11 | ||||||
% Certified product may include a U-bend fitting. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
Documentation shipped with the product are Certified.
Facility : Hastings, NE
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe% |
PE 3608/4710 |
CenFuse |
AWWA C901 |
|||
| 3/4" - 2" SDR 7 | ||||||
| 3/4" - 2" SDR 9 | ||||||
| 3/4" - 2" SDR 11 | ||||||
% Certified product may include a U-bend fitting. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Poly Technology (Polytech) | |
| (A Granse Company) | |
| Airlake Industrial Park | |
| 21670 Hamburg Avenue | |
| Lakeville, MN 55044 | |
| United States | |
| 612-469-2198 |
Facility : Lakeville, MN
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe% [1] |
PE 3608/4710 |
PolyTech |
AWWA C901 |
|||
| 3/4" - 2" SDR 9 | ||||||
| 3/4" - 2" SDR 9 | ||||||
% Certified product does not include a U-Bend Fitting.
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest,
WSLP Fusion or Excel Fusion.
|
||||||
NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 23
Number of matching Products is 153
Processing time was 0 seconds
