NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, June 30, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=AWWA+C906&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Centennial Plastics, Inc. |  |
| 1830 Centennial Avenue | |
| P.O. Box 329 | |
| Hastings, NE 68901 | |
| United States | |
| 866-851-2227 | |
| 402-462-2227 | |
| Visit this company's website |
Facility : Nampa, ID
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § |
PE 3608, PE 4710 |
Cenfuse |
AWWA C906 |
|||
| 4" DR 9 | ||||||
| 4" DR 11 | ||||||
| 4" DR 13.5 | ||||||
| 4" DR 15.5 | ||||||
| 4" DR 17 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Hastings, NE
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 3608/4710 |
CenFuse |
AWWA C906 |
|||
| 4", 6", 8", 10", 12" SDR 7 | ||||||
| 4", 6", 8", 10", 12" SDR 7.3 | ||||||
| 4", 6", 8", 10", 12" SDR 9 | ||||||
| 4", 6", 8", 10", 12" SDR 9.3 | ||||||
| 4", 6", 8", 10", 12" SDR 11 | ||||||
| 4", 6", 8", 10", 12" SDR 13.5 | ||||||
| 4", 6", 8", 10", 12" SDR 15.5 | ||||||
| 4", 6", 8", 10", 12" SDR 17 | ||||||
| 4", 6", 8", 10", 12" SDR 21 | ||||||
| 4", 6", 8", 10", 12" SDR 26 | ||||||
| 4", 6", 8", 10", 12" SDR 32.5 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Geothermal Applications
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 3608/4710 |
CenFuse |
AWWA C906 |
|||
| 4", 6", 8", 10", 12" SDR 7 | ||||||
| 4", 6", 8", 10", 12" SDR 7.3 | ||||||
| 4", 6", 8", 10", 12" SDR 9 | ||||||
| 4", 6", 8", 10", 12" SDR 9.3 | ||||||
| 4", 6", 8", 10", 12" SDR 11 | ||||||
| 4", 6", 8", 10", 12" SDR 13.5 | ||||||
| 4", 6", 8", 10", 12" SDR 15.5 | ||||||
| 4", 6", 8", 10", 12" SDR 17 | ||||||
| 4", 6", 8", 10", 12" SDR 21 | ||||||
| 4", 6", 8", 10", 12" SDR 26 | ||||||
| 4", 6", 8", 10", 12" SDR 32.5 | ||||||
Pipe |
PE 3608/4710 |
CenFuse Geothermal |
AWWA C906 |
|||
| 4", 6", 8", 10", 12" SDR 7 | ||||||
| 4", 6", 8", 10", 12" SDR 7.3 | ||||||
| 4", 6", 8", 10", 12" SDR 9 | ||||||
| 4", 6", 8", 10", 12" SDR 9.3 | ||||||
| 4", 6", 8", 10", 12" SDR 11 | ||||||
| 4", 6", 8", 10", 12" SDR 13.5 | ||||||
| 4", 6", 8", 10", 12" SDR 15.5 | ||||||
| 4", 6", 8", 10", 12" SDR 17 | ||||||
| 4", 6", 8", 10", 12" SDR 21 | ||||||
| 4", 6", 8", 10", 12" SDR 26 | ||||||
| 4", 6", 8", 10", 12" SDR 32.5 | ||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| CRP Products & Manufacturing a division of EMCO Corporation | |
| 3001 84 Avenue | |
| Edmonton, AB T6P 1K1 | |
| Canada | |
| 800-661-4054 | |
| 780-449-1599 | |
| Visit this company's website |
Facility : Edmonton, Alberta, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Molded Butt Fittings+ § |
PE 100/4710 |
CRP-PE 100/4710 |
AWWA C906 |
|||
|
Molded Butt 45° Elbow |
||||||
| 4" - 12" | ||||||
|
Molded Butt 90° Elbow |
||||||
| 4" - 12" | ||||||
|
Molded Butt Cap |
||||||
| 4" - 12" | ||||||
|
Molded Butt Flange Adapter |
||||||
| 4" - 54" | ||||||
|
Molded Butt Reducer |
||||||
| 4" x 2" - 12" x 10" | ||||||
|
Molded Butt Stub End |
||||||
| 14" - 54" | ||||||
|
Molded Butt Tee |
||||||
| 4" - 12" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
| Fluidos Industriales Mexicanos S.A. de C.V. | |
| Av. Tecnologico 483, Monterrey | |
| Technology Park Cienega De Flores | |
| Nuevo Léon 65550 | |
| Mexico | |
| 52-818-384-7310 | |
| Visit this company's website |
Facility : Nuevo Léon, México
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Fittings+ [G] |
PE 4710 |
TKP-FIT 45° ELBOWS |
AWWA C906 |
|||
| 4" - 48" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Fittings+ [G] |
PE 4710 |
TKP-FIT 90° ELBOWS |
AWWA C906 |
|||
| 4" - 48" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Fittings+ [G] |
PE 4710 |
TKP-FIT TEE |
AWWA C906 |
|||
| 4" - 48" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe+ [G] |
PE 4710 |
TUBERIA TKP TIPO II PE-4710 |
AWWA C906 |
|||
| 4"- 24" DR 7 | ||||||
| 4" - 32" DR 9 | ||||||
| 4" - 36" DR 11 | ||||||
| 4" - 48" DR 13.5, 15.5, 17, 21, 26, 32.5, 41 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Flying W Plastics Inc. |  |
| 487 Vanhorn Drive | |
| P.O. Box 759 | |
| Glenville, WV 26351 | |
| United States | |
| 304-462-5779 | |
| Visit this company's website |
Facility : Jacksonville, FL
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
FLYING W SPEC II |
AWWA C906 |
|||
| 4" - 24" DR 7 | ||||||
| 4" - 24" DR 9 | ||||||
| 4" - 24" DR 11 | ||||||
| 4" - 24" DR 13.5 | ||||||
| 4" - 24" DR 17 | ||||||
| 4" - 24" DR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Glenville, WV
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
FLYING W SPEC II |
AWWA C906 |
|||
| 4" - 24" DR 7 | ||||||
| 4" - 24" DR 9 | ||||||
| 4" - 24" DR 11 | ||||||
| 4" - 24" DR 13.5 | ||||||
| 4" - 24" DR 17 | ||||||
| 4" - 24" DR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Georg Fischer Central Plastics LLC | |
| 4949 Joseph Hardin Drive | |
| Dallas, TX 75236 | |
| United States | |
| 469-801-2246 |
Facility : Elizabethtown, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Titusville, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ * + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Rapid City, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cedar City, UT
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 3408/4710 |
+GF+ DESIGN FLOW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local
requirements. It is the responsibility of the end user to ensure that the product is
suitable for the
intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Infra Pipe Solutions Ltd. | |
| 6750 Century Avenue | |
| Unit 303 | |
| Mississauga, ON L5N 0B7 | |
| Canada | |
| 905-858-0206 | |
| Visit this company's website |
Facility : Huntsville, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ + |
PE 3408/3608 |
Sclairpipe |
AWWA C906 |
|||
| 4" - 63" SDR 7 | ||||||
| 4" - 63" SDR 7.3 | ||||||
| 4" - 63" SDR 9 | ||||||
| 4" - 63" SDR 9.3 | ||||||
| 4" - 63" SDR 11 | ||||||
| 4" - 63" SDR 13.5 | ||||||
| 4" - 63" SDR 14.5 | ||||||
| 4" - 63" SDR 15.5 | ||||||
| 4" - 63" SDR 17 | ||||||
| 4" - 63" SDR 21 | ||||||
| 4" - 63" SDR 26 | ||||||
| 4" - 63" SDR 32.5 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe$ + |
PE 3408/4710 |
Sclairpipe |
AWWA C906 |
|||
| 4" - 63" SDR 7 | ||||||
| 4" - 63" SDR 7.3 | ||||||
| 4" - 63" SDR 9 | ||||||
| 4" - 63" SDR 9.3 | ||||||
| 4" - 63" SDR 11 | ||||||
| 4" - 63" SDR 13.5 | ||||||
| 4" - 63" SDR 14.5 | ||||||
| 4" - 63" SDR 15.5 | ||||||
| 4" - 63" SDR 17 | ||||||
| 4" - 63" SDR 21 | ||||||
| 4" - 63" SDR 26 | ||||||
| 4" - 63" SDR 32.5 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Saskatoon, Saskatchewan, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + |
PE 3408/3608 |
Sclairpipe |
AWWA C906 |
|||
| 4" - 63" SDR 7 | ||||||
| 4" - 63" SDR 7.3 | ||||||
| 4" - 63" SDR 9 | ||||||
| 4" - 63" SDR 9.3 | ||||||
| 4" - 63" SDR 11 | ||||||
| 4" - 63" SDR 13.5 | ||||||
| 4" - 63" SDR 14.5 | ||||||
| 4" - 63" SDR 15.5 | ||||||
| 4" - 63" SDR 17 | ||||||
| 4" - 63" SDR 21 | ||||||
| 4" - 63" SDR 26 | ||||||
| 4" - 63" SDR 32.5 | ||||||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Pipe* + |
PE 3408/4710 |
Sclairpipe |
AWWA C906 |
|||
| 4" - 63" SDR 7 | ||||||
| 4" - 63" SDR 7.3 | ||||||
| 4" - 63" SDR 9 | ||||||
| 4" - 63" SDR 9.3 | ||||||
| 4" - 63" SDR 11 | ||||||
| 4" - 63" SDR 13.5 | ||||||
| 4" - 63" SDR 14.5 | ||||||
| 4" - 63" SDR 15.5 | ||||||
| 4" - 63" SDR 17 | ||||||
| 4" - 63" SDR 21 | ||||||
| 4" - 63" SDR 26 | ||||||
| 4" - 63" SDR 32.5 | ||||||
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
| IPEX Incorporated |  |
| 3 Place Du Commerce, Suite 101 | |
| Île-Des-Soeurs | |
| Verdun, QC H3E 1H7 | |
| Canada | |
| 514-769-2200 | |
| Visit this company's website |
Facility : Edmonton, Alberta, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [G] |
PE 4710 |
IPEX Inc |
AWWA C906 |
|||
| 4" - 12" DR 9 (PC250) | ||||||
| 4" - 12" DR 21 (PC100) | ||||||
| 4" - 12" DR 17 (PC125) | ||||||
| 4" - 12" DR 11 (PC200) | ||||||
| 4" - 12" DR 13.5 (PC160) | ||||||
| 4" - 12" DR 7 (PC335) | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are NSF Certified.
| IPEX USA LLC |  |
| 3 Place Du Commerce, Suite 101 | |
| Verdun, QC H3E 1H7 | |
| Canada | |
| 514-769-2200 | |
| Visit this company's website |
Facility : Pineville, NC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ ++ [G] |
PE 4710 |
Frialen |
AWWA C906 |
||||
|
Coupling |
|||||||
| 128131 8" DIPS | 128060 8" IPS | 128136 10" DIPS | 128061 10" IPS | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
|||||||
@ Maximum number of transition fittings per residence not to exceed 30.
| J-M Manufacturing Co., Inc. DBA JM Eagle |  |
| 9 Peach Tree Hill Road | |
| Livingston, NJ 07039 | |
| United States | |
| 310-693-8200 | |
| Visit this company's website |
Facility : # 1 Adel, GA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 7 Hastings, NE
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 8 Kingman, AZ
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 9 Magnolia, AR
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 11 Cochranton, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ § [3] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 3/4" - 2" SDR 7.3 | ||||||
| 3/4" - 2" SDR 9 | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 15 Sunnyside, WA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [1] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[1] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 17 Tulsa, OK
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ ^ [2] [G] |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo],
[JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo,
and/or JM Eagle-Tough Turf Mainline.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure that the
product is suitable for the intended application.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
Sewer Main - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe^ |
PE 4710 |
J-M Manufacturing |
AWWA C906 |
|||
| 4" - 65" | ||||||
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, Pure Core, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. |
||||||
NOTE: Only products bearing the NSF Mark are Certified.
| Mexichem Soluciones Integrales S.A. de C.V. | |
| Río San Javier No.10,Fraccionamiento | |
| Viveros del Río, Tlalnepantla 54060 | |
| Mexico | |
| 52 442 217 7970 |
Facility : Cuautitlán Izcalli, Mexico
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2480 |
AWWA C906 |
|||
| 3/4" - 24" | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2490 |
AWWA C906 |
|||
| 3/4" - 24" | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2492 |
AWWA C906 |
|||
| 3/4" - 24" | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem 2502 |
AWWA C906 |
|||
| 3/4" - 24" | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem A6210 |
AWWA C906 |
|||
| 3/4" - 24" | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Pipe++ [G] |
PE 4710 |
Wavin PEAD MX-Chem E6210C |
AWWA C906 |
|||
| 3/4" - 24" | ||||||
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
| Modern Polymer Pipe and Extrusions, LLC | |
| 1655 Louisiana Street | |
| Beaumont, TX 77701 | |
| United States | |
| 800-231-8198 | |
| 409-504-4654 | |
| Visit this company's website |
Facility : Pasadena, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ [G] |
PE 4710 |
HDPE 4710 Poly Pipe |
AWWA C906 |
|||
| 4" - 16" SDR 7 | ||||||
| 4" - 16" SDR 9 | ||||||
| 4" - 16" SDR 11 | ||||||
| 4" - 16" SDR 13.5 | ||||||
| 4" - 16" SDR 17 | ||||||
| 4" - 16" SDR 21 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
Reclaimed Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE 4710 |
HDPE 4710 Poly Pipe |
AWWA C906 |
|||
| 4" - 16" SDR 7 | ||||||
| 4" - 16" SDR 9 | ||||||
| 4" - 16" SDR 11 | ||||||
| 4" - 16" SDR 13.5 | ||||||
| 4" - 16" SDR 17 | ||||||
| 4" - 16" SDR 21 | ||||||
| Performance Pipe |  |
| A Div. of Chevron Phillips Chem Co., LP | |
| 8261 Belleview Drive | |
| Suite 110 | |
| Plano, TX 75024 | |
| United States | |
| 972-599-6600 | |
| Visit this company's website |
Facility : Hagerstown, MD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe |
PE4710 |
DriscoPlex PW |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 63" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 36" - 63" IPS DR 9[2] | ||||||
|
4" - 63" IPS DR 9.3[2] |
||||||
|
4" - 42" IPS DR 11 |
||||||
| 48" - 63" IPS DR 11[2] | ||||||
|
4" - 48" IPS DR 13.5 |
||||||
| 54" - 63" IPS DR 13.5[2] | ||||||
|
4" - 63" IPS DR 15.5[2] |
||||||
|
4" - 63" IPS DR 17 |
||||||
| 4" - 63" IPS DR 21 | ||||||
| 4" - 63" IPS DR 26[2] | ||||||
|
4" - 63" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
|
||||||
| Pipeline Plastics, LLC | |
| 1301 Solana Boulevard | |
| Suite 1440 | |
| Westlake, TX 76262 | |
| United States | |
| 940-627-9100 | |
| Visit this company's website |
Facility : Fair Bluff, NC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § |
PE 4710 |
Pipeline Plastics |
AWWA C906 |
|||
| 4" - 63" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Belle Fourche, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § |
PE 4710 |
Pipeline Plastics |
AWWA C906 |
|||
| 4" - 63" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Decatur, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § |
PE 4710 |
Pipeline Plastics |
AWWA C906 |
|||
| 4" - 63" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Levelland, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ § |
PE 4710 |
Pipeline Plastics |
AWWA C906 |
|||
| 4" - 63" | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Polytubes 2009 Inc. | |
| 16221 - 123 Avenue | |
| Edmonton, AB T5V 1N9 | |
| Canada | |
| 780-453-2211 | |
| Visit this company's website |
Facility : Edmonton, Alberta, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ ++ |
PE 4710 |
PT BLUE47 |
AWWA C906 |
|||
| 4" - 42" (IPS & DIPS) SDR 7[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 7.3[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 9[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 9.3[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 11[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 13.5 |
||||||
| 4" - 42" (IPS & DIPS) SDR 15.5[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 17 |
||||||
| 4" - 42" (IPS & DIPS) SDR 21 | ||||||
| 4" - 42" (IPS & DIPS) SDR 26[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT D447 |
AWWA C906 |
|||
| 4" - 42" (IPS & DIPS) SDR 7[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 7.3[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 9[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 9.3[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 11[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 13.5 |
||||||
| 4" - 42" (IPS & DIPS) SDR 15.5[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 17 |
||||||
| 4" - 42" (IPS & DIPS) SDR 21 | ||||||
| 4" - 42" (IPS & DIPS) SDR 26[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT-I47 |
AWWA C906 |
|||
| 4" - 42" (IPS & DIPS) SDR 7[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 7.3[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 9[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 9.3[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 11[2] |
||||||
|
4" - 42" (IPS & DIPS) SDR 13.5 |
||||||
| 4" - 42" (IPS & DIPS) SDR 15.5[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 17 |
||||||
| 4" - 42" (IPS & DIPS) SDR 21 | ||||||
| 4" - 42" (IPS & DIPS) SDR 26[2] | ||||||
|
4" - 42" (IPS & DIPS) SDR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Facility : Peterborough, Ontario, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe$ ++ |
PE 4710 |
PT BLUE47 |
AWWA C906 |
|||
| 4" - 42" (IPS & DIPS) SDR 7 | ||||||
| 4" - 42" (IPS & DIPS) SDR 7.3 | ||||||
| 4" - 42" (IPS & DIPS) SDR 9 | ||||||
| 4" - 42" (IPS & DIPS) SDR 9.3 | ||||||
| 4" - 42" (IPS & DIPS) SDR 11 | ||||||
| 4" - 42" (IPS & DIPS) SDR 13.5 | ||||||
| 4" - 42" (IPS & DIPS) SDR 15.5 | ||||||
| 4" - 42" (IPS & DIPS) SDR 17 | ||||||
| 4" - 42" (IPS & DIPS) SDR 21 | ||||||
| 4" - 42" (IPS & DIPS) SDR 26 | ||||||
| 4" - 42" (IPS & DIPS) SDR 32.5 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT D447 |
AWWA C906 |
|||
| 4" - 42" (IPS & DIPS) SDR 7 | ||||||
| 4" - 42" (IPS & DIPS) SDR 7.3 | ||||||
| 4" - 42" (IPS & DIPS) SDR 9 | ||||||
| 4" - 42" (IPS & DIPS) SDR 9.3 | ||||||
| 4" - 42" (IPS & DIPS) SDR 11 | ||||||
| 4" - 42" (IPS & DIPS) SDR 13.5 | ||||||
| 4" - 42" (IPS & DIPS) SDR 15.5 | ||||||
| 4" - 42" (IPS & DIPS) SDR 17 | ||||||
| 4" - 42" (IPS & DIPS) SDR 21 | ||||||
| 4" - 42" (IPS & DIPS) SDR 26 | ||||||
| 4" - 42" (IPS & DIPS) SDR 32.5 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
Pipe$ ++ |
PE 4710 |
PT-I47 |
AWWA C906 |
|||
| 4" - 42" (IPS & DIPS) SDR 7 | ||||||
| 4" - 42" (IPS & DIPS) SDR 7.3 | ||||||
| 4" - 42" (IPS & DIPS) SDR 9 | ||||||
| 4" - 42" (IPS & DIPS) SDR 9.3 | ||||||
| 4" - 42" (IPS & DIPS) SDR 11 | ||||||
| 4" - 42" (IPS & DIPS) SDR 13.5 | ||||||
| 4" - 42" (IPS & DIPS) SDR 15.5 | ||||||
| 4" - 42" (IPS & DIPS) SDR 17 | ||||||
| 4" - 42" (IPS & DIPS) SDR 21 | ||||||
| 4" - 42" (IPS & DIPS) SDR 26 | ||||||
| 4" - 42" (IPS & DIPS) SDR 32.5 | ||||||
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). |
||||||
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
are not certified for use in applications where an oxidative resistance classification
(e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
| Teel Plastics Inc. | |
| 1060 Teel Court | |
| Baraboo, WI 53913 | |
| United States | |
| 608-355-3080 | |
| Visit this company's website |
Facility : Baraboo, WI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe+ |
PE 4710 |
Teel Plastics PE4710 Pressure Pipe |
AWWA C906 |
|||
| 4" - 8" SDR 9 | ||||||
| 4" - 8" SDR 11 | ||||||
| 4" - 8" SDR 15.5 | ||||||
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
| Tex-Trude Pipe Co., LLC. | |
| 2009 Sheldon Road | |
| P.O. Box 1759 | |
| Channelview, TX 77530 | |
| United States | |
| 281-864-5219 |
Facility : Channelview, TX
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + ^ |
PE |
NEXT-PIPE L-23 |
AWWA C906 |
|||
| IPS - 6", 8", 12", 14", 20" SDR 7, 9, 11, 13.5, 17, 21 | ||||||
| DIOD - 6", 8", 10", 12", 14" 16", 18", 20" SDR 7, 9, 11, 13.5, 17, 21 | ||||||
* This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
Pipe* + ^ |
PE |
NEXT-PIPE CP-23 |
AWWA C906 |
|||
| IPS - 6", 8", 12", 14", 20" SDR 7, 9, 11, 13.5, 17, 21 | ||||||
| DIOD - 6", 8", 10", 12", 14" 16", 18", 20" SDR 7, 9, 11, 13.5, 17, 21 | ||||||
* This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. |
||||||
| Versaprofiles Product Inc. | |
| 154 Principale Street | |
| Saint-Lazare de Bellechasse, QC G0R 3J0 | |
| Canada | |
| 877-335-7473 | |
| 418-883-2036 |
Facility : Saint-Lazare de Bellechasse, Québec, Canada
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Tubing+ |
PE 4710 |
Versapipe HD100PW |
AWWA C906 |
|||
| 4" - 10" IPS DR 7.3[2] | ||||||
|
4" - 10" IPS DR 9 |
||||||
| 4" - 10" IPS DR 9.3[2] | ||||||
|
4" - 10" IPS DR 11 |
||||||
| 4" - 10" IPS DR 13.5 | ||||||
| 4" - 10" IPS DR 15.5[2] | ||||||
|
4" - 10" IPS DR 17 |
||||||
| 4" - 10" IPS DR 21 | ||||||
| 4" - 10" IPS DR 26[2] | ||||||
|
4" - 10" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
| WL Plastics Corporation |  |
| 3575 Lone Star Circle | |
| Suite 300 | |
| Fort Worth, TX 76177 | |
| United States | |
| 682-831-2727 | |
| Visit this company's website |
Facility : Elizabethtown, KY
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
WL Plastics KY / WLP KY |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42 IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions
or special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Titusville, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + |
PE 4710 |
WL Plastics PA/WLP PA |
AWWA C906 |
|||
| 4" - 24" IPS DR 7 | ||||||
| 4" - 24" IPS DR 7.3[2] | ||||||
|
4" - 24" IPS DR 9 |
||||||
| 4" - 24" IPS DR 11 | ||||||
| 4" - 24" IPS DR 13.5 | ||||||
| 4" - 24" IPS DR 15.5[2] | ||||||
|
4" - 24" IPS DR 17 |
||||||
| 4" - 24" IPS DR 21 | ||||||
| 4" - 24" IPS DR 26[2] | ||||||
|
4" - 24" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the
end user to ensure the product is suitable for the intended application.
* Product tested and Certified for Cold 23°C (73°F) applications only. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. |
||||||
Facility : Rapid City, SD
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
WL Plastics SD / WLP SD |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42" IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 32.5[2] | ||||||
|
4" - 54" IPS DR 26[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Cedar City, UT
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe* + [G] |
PE 4710 |
WL Plastics UT / WLP UT |
AWWA C906 |
|||
| 4" - 26" IPS DR 7 | ||||||
| 4" - 28" IPS DR 7.3[2] | ||||||
|
4" - 34" IPS DR 9 |
||||||
| 4" - 42 IPS DR 11 | ||||||
| 4" - 48" IPS DR 13.5 | ||||||
| 4" - 54" IPS DR 15.5[2] | ||||||
|
4" - 54" IPS DR 17 |
||||||
| 4" - 54" IPS DR 21 | ||||||
| 4" - 54" IPS DR 26[2] | ||||||
|
4" - 54" IPS DR 32.5[2] |
||||||
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
special local requirements. It is the responsibility of the end user to ensure the
product is suitable for the intended application.
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems
Water-Based Ground-Source “Geothermal” Heat Pump Systems
| Centennial Plastics, Inc. | |
| 1830 Centennial Avenue | |
| P.O. Box 329 | |
| Hastings, NE 68901 | |
| United States | |
| 866-851-2227 | |
| 402-462-2227 | |
| Visit this company's website |
Facility : Hastings, NE
NSF/ANSI 358-1 Polyethylene Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pipe% |
PE 3608/4710 |
CenFuse |
AWWA C906 |
|||
| 4", 6", 8", 10", 12" SDR 7 | ||||||
| 4", 6", 8", 10", 12" SDR 7.3 | ||||||
| 4", 6", 8", 10", 12" SDR 9 | ||||||
| 4", 6", 8", 10", 12" SDR 9.3 | ||||||
| 4", 6", 8", 10", 12" SDR 11 | ||||||
| 4", 6", 8", 10", 12" SDR 13.5 | ||||||
| 4", 6", 8", 10", 12" SDR 15.5 | ||||||
| 4", 6", 8", 10", 12" SDR 17 | ||||||
| 4", 6", 8", 10", 12" SDR 21 | ||||||
| 4", 6", 8", 10", 12" SDR 26 | ||||||
| 4", 6", 8", 10", 12" SDR 32.5 | ||||||
% Certified product may include a U-bend fitting. |
||||||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 19
Number of matching Products is 355
Processing time was 0 seconds
