NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?TradeName=aquarise&ProductStandard=CSA+B137%2E6&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Toronto, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings¢ +++ [2] [G] #####		  
MLTPL		  
IPEX (Aquarise)		  
CSA B137.6

Female Adapter, SOC x FPT
359800 1/2"   359801 3/4"   359802 1"   359803 1 1/4"  
359804 1 1/2"   359805 2"  

Female Adapter, SP x FPT
359820 1/2"   359821 3/4"   359822 1"  

Male Adapter, SOC x MPT
359811 1/2"   359812 3/4"   359813 1"   359814 1 1/4"  
359815 1 1/2"   359816 2"  

Male Adapter, SP x MPT
359823 1/2"   359824 3/4"   359825 1"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Product may be marked with the "IPEX" trade name only. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
##### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and
      180°F with a rated pressure of 100 psi per CSA B137.6.

Fittings¢ +++ [2] [G]		  
CPVC		  
IPEX (AquaRise)		  
CSA B137.6

45° Elbow (Soc x Soc)
359164 1/2"   359165 3/4"   359166 1"   359167 1 1/4"  
359168 1 1/2"   359169 2"   359170 2 1/2"   359171 3"  
359172 4"   359173 6"  

90° Elbow (Soc x Soc)
359194 1/2"   359195 3/4"   359196 1"   359197 1 1/4"  
359198 1 1/2"   359199 2"   359200 2 1/2"   359201 3"  
359202 4"   359203 6"  

90° Street Elbow (S x S)
359175 1/2"   359176 3/4"   359177 1"  

Adapter (IPS S x CTS S)
359100 1/2"   359101 3/4"  

Adapter (IPS SOC x CTS S)
359097 1/2"   359098 3/4"  

Cap (Soc)
359109 1/2"   359110 3/4"   359111 1"   359112 1 1/4"  
359113 1 1/2"   359114 2"   359115 2 1/2"   359116 3"  
359107 4"   359108 6"  

Coupling (Soc x Soc)
359132 1/2"   359133 3/4"   359134 1"   359135 1 1/4"  
359136 1 1/2"   359137 2"   359138 2 1/2"   359139 3"  
359140 4"   359141 6"  

Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"  

Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"  

Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"   359376 1" x 1/2"   359377 1" x 3/4"   359378 1 1/4" x 1/2"  
359379 1 1/4" x 3/4"   359380 1 1/4" x 1"   359381 1 1/2" x 1/2"   359382 1 1/2" x 3/4"  
359383 1 1/2" x 1"   359384 1 1/2" x 1 1/4"   359385 2" x 1/2"   359386 2" x 3/4"  
359387 2" x 1"   359388 2" x 1 1/4"   359389 2" x 1 1/2"   359390 2 1/2" x 3/4"  
359391 2 1/2" x 1"   359392 2 1/2" x 2"   359393 3" x 1 1/2"   359394 3" x 2"  
359395 3" x 2 1/2"   359428 4" x 1 1 /4"   359429 4" x 1 1/2"   359396 4" x 2"  
359430 4" x 2 1/2"   359397 4" x 3"   359398 6" x 2"   359399 6" x 3"  
359400 6" x 4"  

Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"   359461 1" x 1/2"   359462 1" x 3/4"   359463 1 1/4" x 1"  
359465 1 1/2" x 1"   359466 1 1/2" x 1 1/4"   359467 2" x 1"   359458 2" x 1 1/2"  
359470 3" x 2"   359459 4" x 2"   359472 4" x 3"  

Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"   359514 3/4" x 1/2" x 1/2"   359492 3/4" x 3/4" x 1/2"   359493 1" x 1" x 1/2"  
359494 1" x 1" x 3/4"   359495 1 1/4" x 1 1/4" x 1"   359515 1 1/2" x 1 1/2" x 1/2"   359496 1 1/2" x 1 1/2" x 3/4"  
359497 1 1/2" x 1 1/2" x 1"   359498 2" x 2" x 1/2"   359499 2" x 2" x 3/4"   359500 2" x 2" x 1"  
359501 2" x 2" x 1 1/2"   359503 2 1/2" x 2 1/2" x 1/2"   359504 2 1/2" x 2 1/2" x 3/4"   359505 2 1/2" x 2 1/2" x 1"  
359506 2 1/2" x 2 1/2" x 1 1/4"   359507 2 1/2" x 2 1/2" x 2"   359502 3" x 3" x 2"   359508 4" x 4" x 2"  
359509 4" x 4" x 3"   359510 6" x 6" x 2"   359511 6" x 6" x 3"   359512 6" x 6" x 4"  

Sweep Fitting (S x S)[1]
091834 1 1/2"   091835 2"   091836 2 1/2"  

Tee (Soc x Soc x Soc)
359481 1/2"   359482 3/4"   359483 1"   359484 1 1/4"  
359485 1 1/2"   359486 2"   359487 2 1/2"   359488 3"  
359489 4"   359490 6"   

[1] The Sweep fittings are certified individually but sold as part of a (non-certified)
    multicomponent "Compact Loop" product. The Compact Loop product is assembled from
    certified sweep fittings and certified pipe.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Product may be marked with the "IPEX" trade name only. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ ## +++ [2] [G]		  
CPVC		  
IPEX (AquaRise)		  
CSA B137.6

Flange x Socket
359040 2 1/2"   359041 3"   359043 4"   359042 6"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Product may be marked with the "IPEX" trade name only. 
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement¢ *** +++ [1] [2] [3] [G] CPVC PW IPEX AquaRise™ Cement CSA B137.6
Solvent Cement¢ *** +++ [1] [3] [G] CPVC PW, DWV, SW AquaRise™ CPVC One Step Cement Medium Bodied Yellow Low VOC CSA B137.6
Solvent Cement¢ *** +++ [1] [2] [3] [G] CPVC PW, DWV, SW AquaRise™CPVC Two Step Cement Heavy Bodied Yellow Low VOC CSA B137.6 

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either the AquaRise Primer or IPEX 70 Purple/Clear Primer.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
IPEX Incorporated 
3 Place Du Commerce
Suite 101 Îles-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Casella, Genova, Italy

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Valves§ +++ [1] [2] [3] [G]		  
CPVC		  
AquaRise One-Piece Ball Valves		  
CSA B137.6		 

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Products are tested and certified for use with IPEX Aquarise piping system components.
[2] Certified valve sizes 1/2 - 2 in.
[3] CPVC ball valves certified to ASTM F1970, CSA B137.6 and UP/IP code. Temperature and
    pressure rating of 100psi at 180°F and 400psi at 73°F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


 
IPEX USA LLC 
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Pineville, NC

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe¢ ### [G]		  
CPVC 4120		  
AquaRise		  
CSA B137.6
1 1/2" - 6" SDR 21 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and
    180°F with a rated pressure of 100 psi per CSA B137.6.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Pipe¢ +++ [G]		  
CPVC 4120		  
AquaRise		  
CSA B137.6
1/2" - 6" SDR 11 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ +++ [G]		  
CPVC		  
IPEX (AquaRise)		  
CSA B137.6

45° Elbow (S x S)
359164 1/2"   359165 3/4"   359166 1"   359167 1 1/4"  
359168 1 1/2"   359169 2"   359170 2 1/2"   359171 3"  
359172 4"   359173 6"  

90° Elbow (S x S)
359194 1/2"   359195 3/4"   359196 1"   359197 1 1/4"  
359198 1 1/2"   359199 2"   359200 2 1/2"   359201 3"  
359202 4"   359203 6"  

90° Street Elbow (S x S)
359175 1/2"   359176 3/4"   359177 1"  

Caps (S)
359109 1/2"   359110 3/4"   359111 1"   359112 1 1/4"  
359113 1 1/2"   359114 2"   359115 2 1/2"   359116 3"  
359107 4"   359108 6"  

Coupling (S x S)
359132 1/2"   359133 3/4"   359134 1"   359135 1 1/4"  
359136 1 1/2"   359137 2"   359138 2 1/2"   359139 3"  
359140 4"   359141 6"  

Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"  

Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"  

Reducer Bushing (S x Sp)
359375 3/4" x 1/2"   359376 1" x 1/2"   359377 1" x 3/4"   359382 1 1/2" x 3/4"  
359384 1 1/2" x 1 1/4"   359388 2" x 1 1/4"   359389 2" x 1 1/2"   359392 2 1/2" x 2"  
359393 3" x 1 1/2"   359394 3" x 2"   359395 3" x 2 1/2"   359428 4" x 1 1/4"  
359429 4" x 1 1/2"   359396 4" x 2"   359430 4" x 2 1/2"   359397 4" x 3"  
359398 6" x 2"   359399 6" x 3"   359400 6" x 4"  

Reducer Coupling (S x S)
359460 3/4" x 1/2"   359461 1" x 1/2"   359462 1" x 3/4"   359466 1 1/2" x 1 1/4"  
359458 2" x 1 1/2"   359470 3" x 2"   359459 4" X 2"   359472 4" X 3"  

Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"   359514 3/4" x 1/2" x 1/2"   359492 3/4" x 3/4" x 1/2"   359493 1" x 1" x 1/2"  
359494 1" x 1" x 3/4"   359501 2" x 2" x 1 1/2"   359506 2 1/2" x 2 1/2" x 1 1/4"   359507 2 1/2" x 2 1/2" x 2"  
359502 3" x 3" x 2"   359508 4" x 4" x 2"   359509 4" x 4" x 3"   359510 6" x 6" x 2"  
359511 6" x 6" x 3"   359512 6" x 6" x 4"  

Sweep Fitting (S x S)[1]
091834 1 1/2"   091835 2"   091836 2 1/2"  

Tee (S x S x S)
359481 1/2"   359482 3/4"   359483 1"   359484 1 1/4"  
359485 1 1/2"   359486 2"   359487 2 1/2"   359488 3"  
359489 4"   359490 6"   

[1] The Sweep fittings are certified individually but sold as part of a (non-certified)
    multicomponent "Compact Loop" product. The Compact Loop product is assembled from
    certified sweep fittings and certified pipe.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Fittings¢ +++ [G]		  
CPVC		  
IPEX (AquaRise)		  
CSA B137.6

Flange x Socket
359040 2 1/2"   359041 3"   359043 4"   359042 6"   

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


@ Maximum number of transition fittings per residence not to exceed 30.
^ Product can also use the trade Name "IPEX".
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
Number of matching Manufacturers is 4
Number of matching Products is 257
Processing time was 0 seconds