NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, July 12, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Pools/Listings.asp?Company=03410&Standard=050&
NSF/ANSI 50
Equipment for Swimming Pools, Spas, Hot Tubs
and Other Recreational Water Facilities
Equipment for Swimming Pools, Spas, Hot Tubs
and Other Recreational Water Facilities
| Pentair Water Pool and Spa, Inc. | |
| A Division of Pentair Pool Products, Inc | |
| 1351 Route 55 | |
| La Grangeville, NY 12540-5105 | |
| United States | |
| 845-463-7200 | |
| Visit this company's website |
Facility : Apopka, FL
Sand Type Filters
| Model Number | Filter Type | Design Filtration Rate GPM Per ft² |
Effective Filtration Area (ft²) |
End Use |
|
Sand Filters[1] [2] [3] [4] |
||||
| RS60 | High Rate Sand | 5-20 | 13.5 | Pool or Spa/Hot Tub |
| RS72 | High Rate Sand | 5-20 | 17.2 | Pool or Spa/Hot Tub |
| SS48 | High Rate Sand | 5-20 | 13.5 | Pool or Spa/Hot Tub |
| SS72 | High Rate Sand | 5-20 | 20 | Pool or Spa/Hot Tub |
| SS96 | High Rate Sand | 5-20 | 27 | Pool or Spa/Hot Tub |
[1] Certified for freshwater/saltwater applications with Type 1 (< 1500 ppm sodium
chloride), Type 2 (1500-6000 ppm sodium chloride), and Type 3 (>6000 ppm sodium
chloride) Water Applications.
[2] These products have been accepted for use with Zeobrite® in accordance with the
manufacturer's instructions as noted in the owner's manual, Rev C June 2004.
[3] These products have been accepted for use with Zeoclere-30 in accordance with the
manufacturer's instructions as noted in the owner's manual, Rev C June 2004.
[4] RS and SS filters are pressure rated at 100 psi.
|
||||
[5] The certification does not include the valves or face piping.
Materials and Components
|
In-Line PS Strainers[1] [2] [3] |
||||||
| PS6X6 | PS6X5E | PS6X4E | PS6X3E | PS8X8 | PS8X6E | PS8X5E |
| PS8X4E | PS10x10 | PS10x8E | PS10x6E | PS10x5E | PS#X#E | |
[1] # designation indicates optional available reducers
Suffix C denotes Concentric reducers
Suffix E denotes Eccentric reducers
Suffix E will be replaced with C if Concentric reducer is used.
[2] Products comply with the health effects requirements of NSF/ANSI Standard 50.
[3] NSF Listed strainers are pressure rated at 50 PSI.
|
||||||
Facility : Little Falls, NY
Sand Type Filters
| Model Number | Filter Type | Design Filtration Rate GPM Per ft² |
Effective Filtration Area (ft²) |
End Use |
|
THS Series Sand Filters[1] [2] |
||||
| THS3461 | High Rate Sand | 5-20 | 13.5 | Pool |
| THS3484 | High Rate Sand | 5-20 | 19 | Pool |
| THS4272 | High Rate Sand | 5-20 | 19.7 | Pool |
| THS4284 | High Rate Sand | 5-20 | 23.2 | Pool |
| THS4296 | High Rate Sand | 5-20 | 26.7 | Pool |
[1] The certification does not include the valves or face piping. [2] NSF Listed units may be constructed with a clear manway cover. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 23
Processing time was 0 seconds
