NSF Product and Service Listings

These NSF Official Listings are current as of Monday, December 2, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Protocols/Listings.asp?Standard=P151&



NSF P151
Health Effects from Rainwater Catchment System Components



 
A.G. Layne, Inc. 
4578 Brazil St.
Los Angeles, CA 90039 
United States 
818-242-8486
Visit this company's website

Facility : Grapevine, TX

 
Rooftop Coatings[1]
  GT 6759

[1] Coating Notes:
    Colors: Typical White
    Number Of Coats: 2
    Maximum Field Use Dry Thickness(in mils): 20
    Recoat Cure Time and Temperature: 24 hours at 77°F
    Final Cure Time/Temperature: 30 days at 77°F



 
Accella Polyurethane Systems, LLC DBA Carlisle Polyurethane Systems, 
Carlisle Roof Foam and Coatings
2500 Adie Road 
Maryland Heights, MO 63043 
United States 
770-528-9556
Visit this company's website

Facility : Cartersville, GA

 
Rooftop Coatings[1] [2]
  Poly-Sil™ 2200 White
  Poly-Sil™ 2500 CA White
  Poly-Sil™ 2500 White
  SeamlesSeal™ Ultra HSLV White
  SeamlesSeal™ Ultra LS White

[1] Colors: White
    Number of Coats: 3
    Maximum Field Use Dry Film Thickness (in mils): 15 DFT per coat; 45 DFT total for 3
    coats
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 100° F and 70% Relative Humidity
    Final Cure Time and Temperature: 30 days at 100° F and 70% Relative Humidity
    Special Comments: One component coating
[2] Certified only for white coating.



 
American Weatherstar LLC 
3100 Lees Lane
Mobile, AL 36693 
United States 
800-771-6643 
251-476-7385
Visit this company's website

Facility : # 1 USA

 
Rooftop Coatings[1]
  High Build Silicone 414
  High Solids Silicone 412
  Silicone 410

[1] Colors: White, Tan, Light Gray, Dark Gray
    Number of coats: 2
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Bull-Bond Mfg. Corp. 
P.O. Box 361628
San Juan, 00936-1628 
Puerto Rico 
787-653-4900
Visit this company's website

Facility : Cartersville, GA

 
Rooftop Coatings[1] [2]
  Bull-Bond® Pro-Sil®[3]
  Bull-Bond® Professional Waterproofing Systems™[4]

[1] Colors: White
    Number of Coats: 3
    Maximum Field Use Dry Film Thickness (in mils): 15 DFT per coat; 45 DFT total for 3
    coats
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 100° F and 70% Relative Humidity
    Final Cure Time and Temperature: 30 days at 100° F and 70% Relative Humidity
    Special Comments: One component coating
[2] Certified only for white coating.
[3] Bull-Bond® Pro-Sil® Waterproofing Cool Roof Coating High-Solids 100% Silicone Elastomeric
[4] Bull-Bond® Professional Waterproofing Systems™ Sil-Hs™ High Solids Silicone Roof Coating



 
Carlisle Construction Materials, LLC 
1285 Ritner Highway
Carlisle, PA 17013 
United States 
800-453-2554 
717-245-7000

Facility : Tooele, UT

 
Rooftop Liners[1] [2] [3]
  FleeceBACK TPO Membranes
  Sure-Weld EXTRA TPO Reinforced Membrane
  Sure-Weld TPO Reinforced Membrane
  VersiWeld TPO Reinforced Membrane

[1] Certification does not include Sure-Weld High Slope (HS).
[2] White layer is water contact side.
[3] Certification includes white FleeceBACK TPO membranes of the following thicknesses:
    45 mil TPO membrane + 55 mil fleece (100 mils)
    60 mil TPO membrane + 55 mil fleece (115 mils)
    80 mil TPO membrane + 55 mil fleece (135 mils)
    
    Certification includes white Sure-Weld TPO Reinforced Membrane, Sure-Weld EXTRA TPO
    Reinforced Membrane and VersiWeld TPO Reinforced Membrane in the following thicknesses:
    45 mil
    60 mil
    80 mil



 
CSL Silicones Inc. 
144 Woodlawn Road West
Guelph, ON N1H 1B5 
Canada 
1-800-265-2753
Visit this company's website

Facility : Guelph, Ontario, Canada

 
Rooftop Coatings[1]
  Si-COAT 460RC - Silicone Roof Coating
  Si-COAT 461RC - High Solids Silicone Roof Coating

[1] Colors: White
    Number of Coats: 1-3
    Maximum Field Use Dry Thickness (in mils): 40 mils (20 mils/coat)
    Recoat Cure Time and Temperature: 2-24 hours at 25°C
    Final Cure Time/Temperature: 30 days at 25°C
    Special Comments: 50% Relative Humidity



 
Danosa Caribbean, Inc. 
Calle C, Lot 29, Luchetti Industrial Com
Bayamon 00961 
Puerto Rico 
787-785-4545
Visit this company's website

Facility : # 1 USA

 
Rooftop Coatings[1]
  A+ Kote HS Silicone Roof Coating
  A+ Kote HS+ Silicone Roof Coating
  A+ Kote LS Silicone Roof Coating

[1] Colors: 3201/2201 White, 3202/2202 Tan, 3203/2203 Light Gray, 3204/2204 Dark Gray
        Number of coats: 2
        Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
        Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
        Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Florida Paints & Coatings LLC 
78 3rd Street
Winter Garden, FL 34787 
United States 
407-986-1000
Visit this company's website

Facility : Winter Garden, FL

 
Rooftop Coatings[1]
  # 2001 White Super-Flex 100% Acrylic Elastomeric Roof Coating
  # 3000 White Acrylic Barrier Coating
  # TK2001 White Elastomeric Finish

[1] Coating Notes:
    Colors: White
    Number Of Coats: 2
    Maximum Field Use Dry Thickness(in mils): 35-40 mils
    Recoat Cure Time and Temperature: 12 hours at ambient
    Final Cure Time/Temperature: 48 hours at ambient
    Special Comments: Certification does not include the use of a primer.



GAF 
1 Campus Drive
Parsippany, NJ 07054 
United States 
800-766-3411 

Facility : Phoenix, AZ

 
Rooftop Coatings[1]
  GAF WOB Acrylic TopCoat®
  GAF WOB Brush-Grade Acrylic Flashing

[1] Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 16 wet mils per coat
    Recoat Cure Time and Temperature: 24 hours at 75°F
    Final Cure Time and Temperature: 48 days at 75°F
    Colors: White


Facility : Gainesville, TX

 
Rooftop Liners[1]
  EverGuard Extreme® TPO

[1] Certified for the following thicknesses: 50, 60, 70, and 80 mils.  Certified for the
    white colored liner only.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified. 


 
GAF Materials LLC 
1 Campus Drive
Parsipany, NJ 07054 
United States 
800-766-3411 
973-628-3000

Facility : # 3 USA

 
Rooftop Coatings
  Unisil High Solids Silicone Roof Coating[1] [2]

[1] Certification does not include primer. Only the white color is Certified.
[2] Coating Notes:
    Colors: White
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 30 mils
    Recoat Cure Time and Temperature: 4 hours at 110°F
    Final Cure Time/Temperature: 4 hours at 110°F



 
Gardner Gibson Inc. 
4161 East 7th Avenue
Tampa, FL 33605 
United States 
813-367-4444
Visit this company's website

Facility : Tampa, FL

 
Rooftop Coatings[1]
  5570-X-XX Eterna-Kote Silicone Roof Coating[2]
  5576-X-XX Black Jack Silicone Roof Coating[2]
  AP-585(X) Armor Flex White[3]
  AP-586(X)-(XX)
  CM-985(X)-(XX)
  DYC6480X-XX Dyton HS Silicone Coating[3]
  EP-9800[3]
  HP-586[3]
  RX-985X Root X-Tender Silicone Coating[3]
  RX-986(X)-(XX)
  SU-008(X)-(XX)
  TS-850(X)-(XX)
  WS-555X Weather Seal Silicone Coating[3]

[1] Number of Coats: 2-3
    Maximum Field Use Dry Film Thickness (in mils): 30 (maximum 20 per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 6 hours at 77ºF
    Final Cure Time and Temperature: 72 hours at 77ºF
    Special Comments: One component coating
[2] 5570-(X)-(XX) Eterna-Kote Silicone Roof Coating and 5576-(X)-(XX) Black Jack Silicone
    Roof Coating have the following naming convention:
    X   - Color
    1   - White
    T   - Tan
    7   - Gray
    0   - Clear
    XX  - Size of container
    20  - 1 gallons
    30  - 5 gallons
    55  - 55 gallons
    275 - Tote
[3] AP-585(X)-(XX) Armor Flex White, DYC6480(X)-(XX) Dyton HS Silicone Coating , EP-9800,
    HP-586, RX-985(X)-(XX) Roof X-Tender Silicone Coating, WS-555(X)-(XX) Weather Seal
    Silicone Coating, AP-586(X), RX-586(X), CM-985(X), SU-008(X), and TS-850(X) have the
    following naming convention:
    X - Size of container
    1   - 1 gallons
    5   - 5 gallons
    55  - 55 gallons
    275 - Tote
    XX  - Color
    T   - Tan
    G   - Gray



 
Garland Company 
3800 East 91st Street
Cleveland, OH 44105 
United States 
800-321-9336 
216-430-3611

Facility : New Albany, IN

 
Rooftop Coatings[1]
  Cool-Sil HB
  Cool-Sil SG

[1] Number of coats: 2
    Colors HB and SG series: White, Tan, Light Gray, Dark Gray
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F& 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Greenshield Products, LLC 
4008 Louetta Road #464
Spring, TX 77388 
United States 
832-957-3973
Visit this company's website

Facility : # 1 USA

 
Rooftop Coatings[1] [2]
  SeamlesSEAL ULTRA HSLV silicone coating - GreenSil 110
  SeamlesSEAL ULTRA LS silicone coating - GreenSil 70

[1] Colors: White
    Number of Coats: 3
    Maximum Field Use Dry Film Thickness (in mils): 15 DFT per coat; 45 DFT total for 3
    coats
    Recoat Cure Time and Temperature: 24 hours at 100F and 70% Relative Humidity
    Final Cure Time and Temperature: 30 days at 100F and 70% Relative Humidity
    Special Comments: One component coatings
[2] Certified only for white coating.



 
GT Products 
501 Industrial Boulevard
Grapevine, TX 76051 
United States 
630-229-2959

Facility : Grapevine, TX

 
Rooftop Coatings[1]
  GT 6759

[1] Coating Notes:
    Colors: Typical White
    Number Of Coats: 2
    Maximum Field Use Dry Thickness(in mils): 20
    Recoat Cure Time and Temperature: 24 hours at 77°F
    Final Cure Time/Temperature: 30 days at 77°F



 
Henry a Carlisle Company 
336 Cold Stream Road
Kimberton, PA 19442 
United States 
800-523-0268
Visit this company's website

Facility : Kingman, AZ

 
Rooftop Coatings[1]
  Henry 887 Tropi-Cool® 100% Silicone Roof Coating
  Henry® 487 100% Silicone Roof Coating
  National Coatings SRC 740
  National Coatings SRC 750
  Pro-Grade® 988 Silicone Roof Coating

[1] Colors: White, Light Gray, Dark Gray, Gray, Tan
    Number of coats: 1-3
    Maximum field use dry film thickness (in mils): 30 mils (Maximum 15 mils per coat)
    Maximum thinner: none
    Recoat cure time and temperature: 24 hours at 100°F
    Final cure time and temperature: 48 hours at 100°F


Facility : Bartow, FL

 
Rooftop Coatings[1]
  Henry 887 Tropi-Cool® 100% Silicone Roof Coating
  Henry® 487 100% Silicone Roof Coating
  National Coatings SRC 740
  National Coatings SRC 750
  Pro-Grade® 988 Silicone Roof Coating

[1] Colors: White, Light Gray, Dark Gray, Gray, Tan
    Number of coats: 1-3
    Maximum field use dry film thickness (in mils): 30 mils (Maximum 15 mils per coat)
    Maximum thinner: none
    Recoat cure time and temperature: 24 hours at 100°F
    Final cure time and temperature: 48 hours at 100°F



 
Holcim Solutions and Products US, LLC 
26 Century Boulevard
Suite 205 
Nashville, TN 37214 
United States 
206-575-0450
Visit this company's website

Facility : Waukesha, WI

 
Rooftop Coatings
  GacoFlex S2000[1]
  GacoFlex® S-42 Silicone Coating[2]
  GacoRoofUltra GRU2800[1]

[1] Colors: S2000 White, S2022 Gray, S2048 Tan
    Number of coats: 1-2
    Maximum field use dry film thickness (mils): 38
    Final cure time and temperature: 24-48 hours at 23°C
    Special comments: one component coating
[2] Colors: S4200 White, S4222 Gray, S4248 Tan, S4229 Dark Gray, S4258 Santa Fe
    Number of coats: 1-2
    Maximum field use dry film thickness (mils): 38
    Final cure time/temperature: 24 hours at 23°C



 
Inland Coatings, Inc. 
1320 Litton Drive
Salisbury, NC 28147 
United States 
800-474-6019 
704-932-3054
Visit this company's website

Facility : Alsip, MI

 
Rooftop Coatings[1] [2]
  AldoSil 397F

[1] Certification does not include primer. Only the white color is Certified.
[2] Coating Notes:
    Colors: White
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness (in mils): 30 mils
    Recoat Cure Time and Temperature: 4 hours at 110°F
    Final Cure Time/Temperature: 4 hours at 110°F



 
Instacoat Premium Products 
5920 North Huron Avenue
Oscoda, MI 48750 
United States 
877-552-6724
Visit this company's website

Facility : # 1 USA

 
Rooftop Coatings[1]
  250 HS Silicone

[1] Colors: 3201 White, 3202 Tan, 3203 Light Gray, 3204 Dark Gray
    Number of coats: 2
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Karnak Corporation 
330 Central Avenue
Clark, NJ 07066 
United States 
732-388-0300
Visit this company's website

Facility : Cartersville, GA

 
Rooftop Coatings[1] [2]
  Karna-Sil 670
  Karna-Sil 670 LS

[1] Colors: White
    Number of Coats: 3
    Maximum Field Use Dry Film Thickness (in mils): 15 DFT per coat; 45 DFT total for 3
    coats
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 100° F and 70% Relative Humidity
    Final Cure Time and Temperature: 30 days at 100° F and 70% Relative Humidity
    Special Comments: One component coating
[2] Certified only for white coating.



 
KM Coatings, A Division of Polyglass U.S.A., Inc. 
1111 West Newport Center Drive
Deerfield Beach, FL 33442 
United States 
954-223-1230
Visit this company's website

Facility : # 2 USA

 
Rooftop Coatings[1]
  PS#220.1
  PS#250.1

[1] Colors: White, Tan, Light Gray, Dark Gray
    Number of coats: 2
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



KST Coatings, a Business Unit of the Sherwin-Williams Company 
101 Prospect Avenue
Cleveland, OH 44115 
United States 
888-321-3539 
Visit this company's website

Facility : Orlando, FL

 
Rooftop Coatings[1] [2]
  Geocel Elastoseal Premium Elastomeric Coating
  Kool Seal Premium 12 year Elastomeric White Roof Coating 63-900
  Uniflex 41-300

[1] Evaluation to P151 does not include the Elasto-Seal primer, Snow Roof Roof-Patch, or
    Contouring Polyester Mesh Roof fabric.
[2] Colors: White
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 16.8 (8.4 per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 72°F
    Final Cure Time and Temperature: 24 hours at 72°F
    Special Comments: One component coating; allow 4-6 hours before exposure to rain or
    heavy dew.



 
KST Coatings, a Business Unit of the Sherwin-Williams Company 
101 Prospect Avenue
Cleaveland, OH 44115 
United States 
888-321-3539 
888-321-3539
Visit this company's website

Facility : Florida Mfg / USA

 
Rooftop Coatings[1]
  KS0064900 Kool Seal Tundra Silicone Coating
  KST044300 Uniflex Silicone Coating

[1] Number of Coats: 2-3
    Maximum Field Use Dry Film Thickness (in mils): 30 (maximum 20 per coat)
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 6 hours at 77ºF
    Final Cure Time and Temperature: 72 hours at 77ºF
    Special Comments: One component coating



 
Master Paints & Chemical Corp. 
Carr. 127 Km 12.7 Bo. Magas
Guayanilla, PR 00656 
Puerto Rico 
787-835-4000
Visit this company's website

Facility : Cartersville, GA

 
Rooftop Coatings[1] [2]
  Masterflex Silicone 100

[1] Colors: White
    Number of Coats: 3
    Maximum Field Use Dry Film Thickness (in mils): 15 DFT per coat; 45 DFT total for 3
    coats
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 100° F and 70% Relative Humidity
    Final Cure Time and Temperature: 30 days at 100° F and 70% Relative Humidity
    Special Comments: One component coating
[2] Certified only for white coating.



 
Mule-Hide Products Co., Inc. 
1195 Prince Hall Drive
Beloit, WI 53511 
United States 
800-786-1492 
608-361-6809
Visit this company's website

Facility : Tooele, UT

 
Rooftop Liners[1]
  Mule-Hide TPO-c Extra Membrane
  Mule-Hide TPO-c Membrane

[1] White layer is water contact side.



 
MuleHide Products Company Inc. 
1195 Prince Hall Dr.
Beloit, WI 53511 
United States 
800-786-1492
Visit this company's website

Facility : New Albany, IN

 
Rooftop Coatings[1]
  100% Silicone LS Roof Coating
  100% Silicone Roof Coating

[1] Colors: 3201/2201 White, 3202/2202 Tan, 3203/2203 Light Gray, 3204/2204 Dark Gray
    Number of coats: 2
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Polyglass U.S.A., Inc. 
1111 West Newport Center Drive
Deerfield Beach, FL 33442 
United States 
954-233-1230
Visit this company's website

Facility : # 2 USA

 
Rooftop Coatings[1]
  PolyBrite 90.1
  PolyBrite 95.1

[1] Colors: White, Tan, Light Gray, Dark Gray
    Number of coats: 2
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Progressive Materials, LLC 
540 Central Court
New Albany, IN 47150 
United States 
812-944-7803
Visit this company's website

Facility : New Albany, IN

 
Rooftop Coatings[1]
  Pro Eco Sil HS 3200 - HB Series
  Pro Eco Sil HS 3200 Series
  Pro Poly Sil LS 2200 Series

[1] Colors: 3201/2201 White, 3202/2202 Tan, 3203/2203 Light Gray, 3204/2204 Dark Gray
    Number of coats: 2
    Maximum field use film thickness (in mils): 40 mils (20 mils per coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity
    



 
R.M. Lucas Co., Inc. 
12400 South Laramie Avenue
Alsip, IL 60803 
United States 
773-343-3211

Facility : Alsip, IL

 
Rooftop Coatings
  Lucas #8000 Silicone Roof Coating[1] [2]

[1] Certification does not include primer. Only the white color is Certified.
[2] Coating Notes:
    Colors: White
    Number Of Coats: 1-2
    Maximum Field Use Dry Thickness(in mils): 30 mils
    Recoat Cure Time and Temperature: 4 hours at 110°F
    Final Cure Time/Temperature: 4 hours at 110°F



 
Silicone Distributors Inc. DBA Rooftops 
3025 Friedenstahl
Christiansted, VA 00820 
United States 
340-778-8550
Visit this company's website

Facility : New Albany, NY

 
Rooftop Coatings[1]
  RoofTops 2500 Series
  RoofTops High Solids Silicone #3500 Series
  RoofTops High Solids Silicone Roller Grade #3500 Series

[1] Colors: 3201/2201 White, 3202/2202 Tan, 3203/2203 Light Gray, 3204/2204 Dark Gray
    Number of coats: 2 Maximum field use film thickness (in mils): 40 mils (20 mils per
    coat)
    Recoat cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity 
    Final cure time and temperature: 48 hours at 100 degrees F & 50% Relative Humidity



 
Siplast, Inc. 
14911 Quorum Drive
Suite 600 
Dallas, TX 75254 
United States 
870-551-7155
Visit this company's website

Facility : # 1 USA

 
Rooftop Liners[1]
  Siplast Parasolo® TPX

[1] Certified for the following thicknesses: 50, 60, 70, and 80 mils. Certified for the
    white colored liner only.



 
Tremco CPG Inc. 
Mameco Manufacturing Division
4475 East 175th Street 
Cleveland, OH 44128 
United States 
216-752-4400

Facility : Cleveland, OH

 
Rainwater Catchment System Components
  Vulkem 450/451 PWC[1]
  Vulkem 450/451 PWC Red[1]

[1] Authorized for a topcoat thickness of 5 mils.



 
Tremco CPG Inc. 
3735 Green Road
Beachwood, OH 44122 
United States 
216-292-5000
Visit this company's website

Facility : Cartersville, GA

 
Rooftop Coatings[1] [2]
  AlphaGuard™ Si 70 White
  AlphaGuard™ Si 100 White

[1] Colors: White
    Number of Coats: 3
    Maximum Field Use Dry Film Thickness (in mils): 15 DFT per coat; 45 DFT total for 3
    coats
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 24 hours at 100° F and 70% Relative Humidity
    Final Cure Time and Temperature: 30 days at 100° F and 70% Relative Humidity
    Special Comments: One component coating
[2] Certified only for white coating.



 
Tropical Roofing Products Inc. 
1818 SW 31st Avenue
Hallandale, FL 33009 
United States 
754-300-3640
Visit this company's website

Facility : Hallandale, FL

 
Rooftop Coating
  924 Eterna-Sil Premium Silicone Roof Coating[1]

[1] Colors: White
    Number of Coats: 1
    Maximum Field Use Dry Thickness (in mils): 38 mils
    Final Cure Time/Temperature: 72 hours at 77°F


Number of matching Manufacturers is 33
Number of matching Products is 89
Processing time was 0 seconds