NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 13, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=05170&Standard=060&


NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects



 
Arkema Inc. 
900 First Avenue
King of Prussia, PA 19406 
United States 
610-205-7000
Visit this company's website

Facility : Fairless Hills, PA


Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Albone 34.5 MS Oxidant 3mg/L
Albone 35 MS Oxidant 3mg/L
Albone 50 MS Oxidant 2.1mg/L

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.


Facility : Chattanooga, TN


Hydrogen Peroxide[1] [HP]
Trade Designation Product Function Max Use
Albone 25 MS Oxidant 4.1mg/L
Albone 30 MS Oxidant 3.4mg/L
Albone 32 MS Oxidant 3.2mg/L
Albone 35 MS Oxidant 3mg/L
Albone 50 MS Oxidant 2.1mg/L
Albone 70 MS Oxidant 1.5mg/L

[1] This product may be used for the treatment of sulfide and organic contaminants, with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 43 mg/L.  Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
    
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.


Facility : Memphis, TN


Hydrogen Peroxide [HP]
Trade Designation Product Function Max Use
Albone 35 MS[1] Oxidant 3mg/L
Albone 50 MS[2] Oxidant 2.1mg/L
Albone 70 MS[3] Oxidant 1.5mg/L
Peroxal 50A[2] Oxidant 2.1mg/L
Valsterane® 34.5 FG[1] Oxidant 3mg/L
Valsterane® 35 FG[1] Oxidant 3 mg/L
Valsterane® 50 FG[2] Oxidant 2.1 mg/L

[1] This product may be used for the treatment of sulfide and organic contaminants with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 85 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[2] This product may be used for the treatment of sulfide and organic contaminants, with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 60 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[3] This product may be used for the treatment of sulfide and organic contaminants, with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 43 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.


Facility : Watertown, WI


Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Albone 30% MS Oxidant 3mg/L
Albone 34.5 MS Oxidant 3mg/L
Albone 35 MS Oxidant 3mg/L
Albone 50 MS Oxidant 2.1mg/L
Valsterane® 34.5% FG Oxidant 3mg/L
Valsterane® 35 FG Oxidant 3mg/L

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.


Number of matching Manufacturers is 1
Number of matching Products is 22
Processing time was 0 seconds