NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, October 3, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=0U670&Standard=060&


NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects



 
Jutzi Water Technologies 
525 Wright Boulevard
Stratford, ON N4A 6T1 
Canada 
519-814-9283
Visit this company's website

Facility : Stratford, Ontario, Canada


Citric Acid[1]
Trade Designation Product Function Max Use
Citric Acid 50% Membrane Cleaner N/A

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.

Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 35 Oxidant 3mg/L

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Polyaluminum Chloride[AL]
Trade Designation Product Function Max Use
Formula WW 8320 Coagulation & Flocculation 250mg/L

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Potassium Permanganate[PO]
Trade Designation Product Function Max Use
Potassium Permanganate 02 Disinfection & Oxidation 2500mg/L
Potassium Permanganate 04 Disinfection & Oxidation 1250mg/L
Potassium Permanganate 100 Disinfection & Oxidation 50mg/L

[PO] The finished drinking water shall be monitored to ensure that levels of manganese

     do not exceed 0.05 mg/L.

Sodium Bisulfite[2]
Trade Designation Product Function Max Use
Formula OS 5305 Dechlorination 50mg/L

[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Hydroxide
Trade Designation Product Function Max Use
Sodium Hydroxide 25 pH Adjustment 200mg/L
Sodium Hydroxide 50 pH Adjustment 100mg/L

Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Liquid Chlorine 06 Disinfection & Oxidation 170mg/L
Liquid Chlorine 12 Disinfection & Oxidation 85mg/L

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.

Sodium Polyphosphates, Glassy
Trade Designation Product Function Max Use
Formula PW 1640 Corrosion & Scale Control 50mg/L
Formula PW 1680 Corrosion & Scale Control 25mg/L

Sodium Silicate
Trade Designation Product Function Max Use
Sodium Silicate N Corrosion & Scale Control 42mg/L


Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds