NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 13, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=4R430&Standard=060&


NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects



 
Brenntag Great Lakes LLC 
4420 North Harley Davidson Avenue
Wauwatosa, WI 53225 
United States 
262-252-3550
Visit this company's website

Facility : Chicago, IL


Ammonium Hydroxide
Trade Designation Product Function Max Use
Aqua Ammonia Chloramination 5mg/L
Aqua Ammonia 15 deg Chloramination 5mg/L
Aqua Ammonia 19.5% Chloramination 5mg/L
Aqua Ammonia 26 Degree Chloramination 5mg/L
Aqua Ammonia 8-10 Chloramination 5mg/L

Ferric Sulfate
Trade Designation Product Function Max Use
Ferric Sulfate 50% Coagulation & Flocculation 600mg/L
Ferric Sulfate 60% Coagulation & Flocculation 600mg/L

Phosphoric Acid
Trade Designation Product Function Max Use
Phosphoric Acid 75% Corrosion & Scale Control
pH Adjustment
13mg/L
Phosphoric Acid 85% Corrosion & Scale Control
pH Adjustment
12mg/L

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite 40% Dechlorinator & Antioxidant 46mg/L
Sodium Bisulfite Solution Dechlorinator & Antioxidant 46mg/L

[1] This product contains sulfite.
    Sulfites have been known to cause potentially lethal allergic reactions in sulfite-sensitive individuals.
    The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Hydroxide
Trade Designation Product Function Max Use
Caustic Soda 20% Corrosion & Scale Control
pH Adjustment
250mg/L
Caustic Soda 25% Corrosion & Scale Control
pH Adjustment
200mg/L
Caustic Soda 30% Corrosion & Scale Control
pH Adjustment
166mg/L
Caustic Soda 50% Corrosion & Scale Control
pH Adjustment
100mg/L


Facility : Ft. Wayne, IN


Ammonium Hydroxide
Trade Designation Product Function Max Use
Aqua Ammonia Chloramination 5mg/L
Aqua Ammonia 15 deg Chloramination 5mg/L
Aqua Ammonia 19.5% Chloramination 5mg/L
Aqua Ammonia 26 Degree Chloramination 5mg/L
Aqua Ammonia 8-10 Chloramination 5mg/L

Blended Phosphates
Trade Designation Product Function Max Use
AquaPure 3610 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3619 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3627 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3628 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3637 Sequestering
Corrosion & Scale Control
25mg/L
AquaPure 3646 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3655 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3664 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3672 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3673 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3682 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3691 Corrosion & Scale Control
Sequestering
25mg/L

Ferric Chloride
Trade Designation Product Function Max Use
Ferric Chloride 37-42% Coagulation & Flocculation 250mg/L
Ferric Chloride Liquid 38-42% Coagulation & Flocculation 250mg/L

Ferric Sulfate
Trade Designation Product Function Max Use
Ferric Sulfate 50% Coagulation & Flocculation 600mg/L
Ferric Sulfate 60% Coagulation & Flocculation 600mg/L

Fluorosilicic Acid
Trade Designation Product Function Max Use
Hydrofluorosilicic Acid 23% Fluoridation 6mg/L

Hydrochloric Acid
Trade Designation Product Function Max Use
Hydrochloric Acid 20 Degree Baume Corrosion & Scale Control
pH Adjustment
40mg/L

Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 30% Oxidant 3.4mg/L
Hydrogen Peroxide 32% Oxidant 3.3mg/L
Hydrogen Peroxide 34.5% Oxidant 3mg/L
Hydrogen Peroxide 35% Oxidant 3mg/L
Hydrogen Peroxide 50% Oxidant 2.1mg/L
Hydrogen Peroxide 7% Tech Grade Oxidant 4.7mg/L

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Monosodium Orthophosphate
Trade Designation Product Function Max Use
AquaPure 3601 Corrosion & Scale Control
Sequestering
25mg/L

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite 40% Dechlorinator & Antioxidant 46mg/L
Sodium Bisulfite Solution Dechlorinator & Antioxidant 46mg/L

[1] This product contains sulfite.
    Sulfites have been known to cause potentially lelthal allergic reactions in sulfite-sensitive individuals.
    The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Hydroxide
Trade Designation Product Function Max Use
Caustic Soda 20% Corrosion & Scale Control
pH Adjustment
250mg/L
Caustic Soda 25% Corrosion & Scale Control
pH Adjustment
200mg/L
Caustic Soda 30% Corrosion & Scale Control
pH Adjustment
166mg/L
Caustic Soda 50% Corrosion & Scale Control
pH Adjustment
100mg/L

Sodium Permanganate[PO]
Trade Designation Product Function Max Use
Sodium Permanganate 10% Oxidant 248mg/L
Sodium Permanganate 15% Oxidant 235mg/L
Sodium Permanganate 20% Oxidant 224mg/L
Sodium Permanganate Solution Oxidant 224mg/L

[PO] The finished drinking water shall be monitored to ensure that levels of manganese

     do not exceed 0.05 mg/L.

Sodium Polyphosphates, Glassy
Trade Designation Product Function Max Use
Sodium Hexametaphosphate 35% Corrosion & Scale Control
Sequestering
23mg/L

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Des Moines, IA


Sodium Hydroxide
Trade Designation Product Function Max Use
Caustic Soda 20% Corrosion & Scale Control
pH Adjustment
250mg/L
Caustic Soda 25% Corrosion & Scale Control
pH Adjustment
200mg/L
Caustic Soda 30% Corrosion & Scale Control
pH Adjustment
166mg/L
Caustic Soda 50% Corrosion & Scale Control
pH Adjustment
100mg/L

Sodium Hypochlorite[CL]
Trade Designation Product Function Max Use
GenOx-Pro 125 Disinfection & Oxidation 84mg/L
Sodium Hypochlorite 12.5% Disinfection & Oxidation 84mg/L

[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.


Facility : St. Paul, MN


Ferric Sulfate
Trade Designation Product Function Max Use
Ferric Sulfate 50% Coagulation & Flocculation 600mg/L
Ferric Sulfate 60% Coagulation & Flocculation 600mg/L


Facility : Menomonee Falls, WI


Ammonium Hydroxide
Trade Designation Product Function Max Use
Aqua Ammonia Chloramination 5mg/L
Aqua Ammonia 15 deg Chloramination 5mg/L
Aqua Ammonia 19.5% Chloramination 5mg/L
Aqua Ammonia 26 Degree Chloramination 5mg/L
Aqua Ammonia 8-10 Chloramination 5mg/L

Ammonium Sulfate
Trade Designation Product Function Max Use
40% Ammonium Sulfate Solution Chloramination 60mg/L

Blended Phosphates
Trade Designation Product Function Max Use
AquaPure 3610 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3619 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3627 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3628 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3637 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3646 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3655 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3664 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3672 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3673 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3682 Corrosion & Scale Control
Sequestering
25mg/L
AquaPure 3691 Corrosion & Scale Control
Sequestering
25mg/L

Citric Acid[1] [2]
Trade Designation Product Function Max Use
Citric Acid 50% Liquid Membrane Cleaner
Well Cleaning Aid
NA
Citric Acid 50% Solution Membrane Cleaner
Well Cleaning Aid
NA
Citric Acid Solution Membrane Cleaner
Well Cleaning Aid
NA

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.

Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 30% Oxidant 3.4mg/L
Hydrogen Peroxide 32% Oxidant 3.3mg/L
Hydrogen Peroxide 34.5% Oxidant 3mg/L
Hydrogen Peroxide 35% Oxidant 3mg/L
Hydrogen Peroxide 50% Oxidant 2.1mg/L
Hydrogen Peroxide 7% Tech Grade Oxidant 4.7mg/L

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Hydroxyethylidene Diphosphonic Acid
Trade Designation Product Function Max Use
HEDP Reverse Osmosis Antiscalant 10mg/L

Monosodium Orthophosphate
Trade Designation Product Function Max Use
AquaPure 3601 Corrosion & Scale Control 25mg/L

Sodium Bisulfate[3]
Trade Designation Product Function Max Use
Sodium Bisulfate 40% Dechlorinator & Antioxidant 46mg/L
Sodium Bisulfate Solution Dechlorinator & Antioxidant 46mg/L

[3] This product contains sulfite.  Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.  The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Hypochlorite[CL]
Trade Designation Product Function Max Use
GenOx-Pro 125 Disinfection & Oxidation 84mg/L
Sodium Hypochlorite 12.5% Disinfection & Oxidation 84mg/L

[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

Sodium Permanganate[PO]
Trade Designation Product Function Max Use
Sodium Permanganate 10% Oxidant 248mg/L
Sodium Permanganate 15% Oxidant 235mg/L
Sodium Permanganate 20% Oxidant 224mg/L
Sodium Permanganate Solution Oxidant 224mg/L

[PO] The finished drinking water shall be monitored to ensure that levels of manganese

     do not exceed 0.05 mg/L.

Sodium Polyphosphates, Glassy
Trade Designation Product Function Max Use
Sodium Hexametaphosphate 35% Corrosion & Scale Control
Sequestering
23mg/L

Zinc Orthophosphate[ZN]
Trade Designation Product Function Max Use
LAC-1001 S Corrosion & Scale Control 25mg/L
LAC-101-S Corrosion & Scale Control 20mg/L
LAC-301-S Corrosion & Scale Control 25mg/L
LAC-501 C Corrosion & Scale Control 25mg/L
LAC-501 S Corrosion & Scale Control 25mg/L

[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.


Number of matching Manufacturers is 1
Number of matching Products is 107
Processing time was 0 seconds