NSF Product and Service Listings
These NSF Official Listings are current as of Friday, March 14, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0038712&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
Kurita America Inc. | |
6600 94th Avenue North | |
Minneapolis, MN 55445 | |
United States | |
866-663-7632 | |
763-689-3636 | |
Visit this company's website |
Facility : CB USA
Miscellaneous Chemical Products |
||
Trade Designation | Product Function | Max Use |
ROC 50 N[1] | Membrane Cleaner | NA |
[1] The pH of the influent and effluent water should be monitored to ensure that all traces of the product have been removed before placing into service. |
Miscellaneous Treatment Applications |
||
Trade Designation | Product Function | Max Use |
AvistaVitec™ 8200 | Reverse Osmosis Antiscalant | 7mg/L |
Avista™ 200 | Reverse Osmosis Antiscalant | 7mg/L |
Avista™ VT 8200 | Reverse Osmosis Antiscalant | 7mg/L |
Kuriverter™ AC-427[3] | Dechlorination | 8mg/L |
VItec™ SI410 | Reverse Osmosis Antiscalant | 3mg/L |
VItec™1500 | Reverse Osmosis Antiscalant | 9mg/L |
VItec™1600 | Reverse Osmosis Antiscalant | 20mg/L |
Vitec 7400 | Reverse Osmosis Antiscalant | 15mg/L |
Vitec™ 1000 | Reverse Osmosis Antiscalant | 26mg/L |
Vitec™ 3000 | Reverse Osmosis Antiscalant | 7mg/L |
Vitec™ 3025 | Reverse Osmosis Antiscalant | 25mg/L |
Vitec™ 8200 | Reverse Osmosis Antiscalant | 7mg/L |
[3] This product contains sulfite. Sulfites have been known to cause potentially lethal allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L). |
Miscellaneous Treatment Chemical |
||
Trade Designation | Product Function | Max Use |
Antichlor™ 30[3] | Dechlorination | 15mg/L |
RO 510N | Reverse Osmosis Antiscalant | 15mg/L |
Vitec 4000 | Reverse Osmosis Antiscalant | 7mg/L |
Vitec™ 1000 | Reverse Osmosis Antiscalant | 26mg/L |
Vitec™ 1400 | Reverse Osmosis Antiscalant | 30mg/L |
Vitec™ 5100 | Reverse Osmosis Antiscalant | 13mg/L |
Vitec™ 7000 | Reverse Osmosis Antiscalant | 7mg/L |
[3] This product contains sulfite. Sulfites have been known to cause potentially lethal allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L). |
Miscellaneous Water Supply Products |
||
Trade Designation | Product Function | Max Use |
AvistaClean™ L0381[1] [2] | Membrane Cleaner | NA |
AvistaClean™ L1181[2] | Membrane Cleaner | NA |
AvistaClean™ L1211 | Membrane Cleaner | NA |
AvistaClean™ L1221[1] [2] | Membrane Cleaner | NA |
Avista™ RC L112 | Membrane Cleaner | NA |
Avista™ RC L211[1] [2] | Membrane Cleaner | NA |
Avista™ RC L212[1] [2] | Membrane Cleaner | NA |
Avista™ RC L403[1] [2] | Membrane Cleaner | NA |
Avista™ RC L811[2] | Membrane Cleaner | NA |
Avista™177[1] [2] | Membrane Cleaner | NA |
Avista™181[1] [2] | Membrane Cleaner | NA |
ROC 20 N[1] [2] | Membrane Cleaner | NA |
RoClean™ L102[1] [2] | Membrane Cleaner | NA |
RoClean™ L112 | Membrane Cleaner | NA |
RoClean™ L211[1] [2] | Membrane Cleaner | NA |
RoClean™ L212[1] [2] | Membrane Cleaner | NA |
RoClean™ L403[1] [2] | Membrane Cleaner | NA |
RoClean™ L811[2] | Membrane Cleaner | NA |
[1] The pH of the influent and effluent water should be monitored to ensure that all traces of the product have been removed before placing into service. [2] This product is designed to be used off-line and flushed out prior to using the system for drinking water, following manufacturer's use instructions. |
Polymer Blends[PY] |
||
Trade Designation | Product Function | Max Use |
RoQuest™ 4000 | Coagulation & Flocculation | 142mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for percent monomer and dose. |
Sodium Bisulfite |
||
Trade Designation | Product Function | Max Use |
Dechlor 104 | Dechlorinator & Antioxidant | 40mg/L |
Facility : GV USA
Miscellaneous Water Supply Products |
||
Trade Designation | Product Function | Max Use |
Kuriverter™ IK-110M[2] [3] | Membrane Cleaner | NA |
ROC 20 N | Membrane Cleaner | NA |
ROC 50 N | Membrane Cleaner | NA |
[2] This product is designed to be used off-line and flushed out prior to using the system for drinking water, following manufacturer's use instructions. [3] The pH of the influent and effluent water should be monitored to ensure that all traces of the product have been removed before placing into service. |
Sodium Bisulfite[1] |
||
Trade Designation | Product Function | Max Use |
Dechlor 104 | Dechlorinator & Antioxidant | 40mg/L |
[1] This product contains sulfite. |
Sodium Tripolyphosphate |
||
Trade Designation | Product Function | Max Use |
932 Water Conditioner | Corrosion & Scale Control | 13mg/L |
Facility : SHK, USA
Miscellaneous Chemical Products[1] |
||
Trade Designation | Product Function | Max Use |
AvistaClean™ P0327 | Membrane Cleaner | NA |
AvistaClean™ P1219 | Membrane Cleaner | NA |
AvistaClean™ P611 | Membrane Cleaner | NA |
AvistaClean™MF 3000 | Membrane Cleaner | NA |
Avista™ 127 | Membrane Cleaner | NA |
Avista™ 146 | Membrane Cleaner | NA |
Avista™ 192 | Membrane Cleaner | NA |
Avista™ 199 | Membrane Cleaner | NA |
Avista™ RC P111 | Membrane Cleaner | NA |
Avista™ RC P112 | Membrane Cleaner | NA |
Avista™ RC P192 | Membrane Cleaner | NA |
Avista™ RC P303 | Membrane Cleaner | NA |
Avista™ RC P611 | Membrane Cleaner | NA |
Avista™ RC P903 | Membrane Cleaner | NA |
RoClean™ P111 | Membrane Cleaner | NA |
RoClean™ P112 | Membrane Cleaner | NA |
RoClean™ P192 | Membrane Cleaner | NA |
RoClean™ P303 | Membrane Cleaner | NA |
RoClean™ P611 | Membrane Cleaner | NA |
RoClean™ P903 | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system for drinking water, following manufacturer's use instructions. |
Miscellaneous Treatment Applications |
||
Trade Designation | Product Function | Max Use |
AvistaVitec™ 8200 | Reverse Osmosis Antiscalant | 7mg/L |
Avista™ 200 | Reverse Osmosis Antiscalant | 7mg/L |
Avista™ VT 8200 | Reverse Osmosis Antiscalant | 7mg/L |
Kuriverter™ AC-427[2] | Dechlorination | 8mg/L |
VItec™ SI410 | Reverse Osmosis Antiscalant | 3mg/L |
VItec™1500 | Reverse Osmosis Antiscalant | 9mg/L |
VItec™1600 | Reverse Osmosis Antiscalant | 20mg/L |
Vitec 7400 | Reverse Osmosis Antiscalant | 15mg/L |
Vitec™ 1000 | Reverse Osmosis Antiscalant | 26mg/L |
Vitec™ 3000 | Reverse Osmosis Antiscalant | 7mg/L |
Vitec™ 3025 | Reverse Osmosis Antiscalant | 25mg/L |
Vitec™ 6400 | Reverse Osmosis Antiscalant | 20mg/L |
Vitec™ 6500 | Reverse Osmosis Antiscalant | 20mg/L |
Vitec™ 8200 | Reverse Osmosis Antiscalant | 7mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L). |
Miscellaneous Treatment Chemical |
||
Trade Designation | Product Function | Max Use |
8898 Antiscalant | Reverse Osmosis Antiscalant | 40mg/L |
Antichlor™ 30[2] | Dechlorination | 15mg/L |
AvistaRQ™ 6000 | Coagulation & Flocculation | 289mg/L |
Avista™ RQ3000 | Coagulation & Flocculation | 100mg/L |
RO 510N | Reverse Osmosis Antiscalant | 15mg/L |
RO 8898 | Reverse Osmosis Antiscalant | 40mg/L |
RoQuest™ 3000 | Coagulation & Flocculation | 100mg/L |
RoQuest™ 6000 | Coagulation & Flocculation | 289mg/L |
Vitec 4000 | Reverse Osmosis Antiscalant | 7mg/L |
Vitec™ 1400 | Reverse Osmosis Antiscalant | 30mg/L |
Vitec™ 5100 | Reverse Osmosis Antiscalant | 13mg/L |
Vitec™ 7000 | Reverse Osmosis Antiscalant | 7mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L). |
Miscellaneous Water Supply Products |
||
Trade Designation | Product Function | Max Use |
AvistaClean™ L0381[1] | Membrane Cleaner | NA |
AvistaClean™ L1181[1] [3] | Membrane Cleaner | NA |
AvistaClean™ L1211 NA | Membrane Cleaner | NA |
AvistaClean™ L1221[1] [3] | Membrane Cleaner | NA |
Avista™ RC L112 | Membrane Cleaner | NA |
Avista™ RC L211[1] [3] | Membrane Cleaner | NA |
Avista™ RC L212[1] [3] | Membrane Cleaner | NA |
Avista™ RC L403[1] | Membrane Cleaner | NA |
Avista™ RC L811[1] [3] | Membrane Cleaner | NA |
Avista™177[1] | Membrane Cleaner | NA |
Avista™181[1] | Membrane Cleaner | NA |
ROC 20 N[1] | Membrane Cleaner | NA |
ROC 50 N[1] | Membrane Cleaner | NA |
RoClean™ L102[1] [3] | Membrane Cleaner | NA |
RoClean™ L112 | Membrane Cleaner | NA |
RoClean™ L211[1] [3] | Membrane Cleaner | NA |
RoClean™ L212[1] [3] | Membrane Cleaner | NA |
RoClean™ L403[1] | Membrane Cleaner | NA |
RoClean™ L612 | Membrane Cleaner | NA |
RoClean™ L811[1] [3] | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system for drinking water, following manufacturer's use instructions. [3] The pH of the influent and effluent water should be monitored to ensure that all traces of the product have been removed before placing into service. |
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
Trade Designation | Product Function | Max Use |
8294 Coagulant | Coagulation & Flocculation | 25mg/L |
Kurifloc 2912 | Coagulation & Flocculation | 25mg/L |
Polyacrylamide[PC] |
||
Trade Designation | Product Function | Max Use |
8221 Flocculant | Coagulation & Flocculation | 1mg/L |
Kurifloc 4330 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111 requirements for percent monomer and dose. |
Polyaluminum Chloride[AL] |
||
Trade Designation | Product Function | Max Use |
8333 Coagulant Aid | Coagulation & Flocculation | 250mg/L |
Kurifloc 2805 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished drinking water shall not exceed 2 mg/L. |
Polymer Blends[PY] |
||
Trade Designation | Product Function | Max Use |
RoQuest™ 4000 | Coagulation & Flocculation | 142mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for percent monomer and dose. |
Sodium Bisulfite[2] |
||
Trade Designation | Product Function | Max Use |
Dechlor 104 | Dechlorinator & Antioxidant | 40mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L). |
Sodium Polyphosphates, Glassy |
||
Trade Designation | Product Function | Max Use |
921 | Corrosion & Scale Control | 12mg/L |
Sodium Tripolyphosphate |
||
Trade Designation | Product Function | Max Use |
932 Water Conditioner | Corrosion & Scale Control | 13mg/L |
Number of matching Manufacturers is 1
Number of matching Products is 121
Processing time was 0 seconds