NSF Product and Service Listings

These NSF Official Listings are current as of Friday, July 4, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0357586&Standard=060&


NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects



 
Blendpack, Inc. 
3370 Old Tasso Road
Cleveland, TN 37312 
United States 
423-693-0801
Visit this company's website

Facility : # 1 USA


Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 32% Oxidant 3.3mg/L

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

[1] This product may be used at a maximum use level of 90 mg/L for the following functions:
    -reoxygenation of treated water
    -oxidation of organic residuals
    -oxidation of any reduced products, such as Fe(II) and sulfides
    Treatment must be followed by chlorination to a chlorine residual not to exceed 4 mg/L,
    the EPA's proposed maximum residual level.

Number of matching Manufacturers is 1
Number of matching Products is 1
Processing time was 0 seconds