NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, October 21, 2020 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=CETCO&


NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects



 
CETCO 
Colloid Environmental Technologies Co.
2870 Forbs Avenue 
Hoffman Estates, IL 60192 
United States 
800-527-9948 
847-851-1824
Visit this company's website

Facility : # 1 USA


Bentonite[1]
Trade Designation Product Function Max Use
HYDRAUL-EZ® Drilling Fluid
Well Drilling Aid
NA
PREMIUM GEL® Drilling Fluid
Well Drilling Aid
NA
SUPER GEL-X® Drilling Fluid
Well Drilling Aid
NA
VELOXITY-PRO Drilling Fluid
Well Drilling Aid
NA
XTRA GEL™ Drilling Fluid
Well Drilling Aid
NA

[1] This product is designed to be used off-line following manufacturer’s use instructions.
    The well is to be flushed until the turbidity of the water is < 1 NTU before the system
    may be used for drinking water.

Miscellaneous Water Supply Products
Trade Designation Product Function Max Use
C/S GRANULAR™[1] Well Sealant
Drilling Fluid
NA
CETCO®/VOLCLAY® CHIPS[1] Well Sealant
Drilling Fluid
NA
CETCO®/VOLCLAY® CRUMBLES[1] [2] Well Sealant NA
CETCO®/VOLCLAY® CRUMBLES #8[1] [2] Well Sealant NA
CETCO®/VOLCLAY® GRANULAR GROUT[1] [2] Well Sealant NA
CETCO®/VOLCLAY® GROUT[1] [2] Well Sealant NA
CETCO®/VOLCLAY® TABLETS[1] Well Sealant
Drilling Fluid
NA
CETCO®/VOLCLAY®/PUREGOLD® CHIPS[1] [3] Well Sealant NA
CETCO®/VOLCLAY®/PUREGOLD® COARSE CHIPS[1] [3] Well Sealant NA
CETCO®/VOLCLAY®/PUREGOLD® MEDIUM CHIPS[1] [3] Well Sealant NA
GEOTHERMAL GROUT™[1] Well Sealant NA
HIGH TC GEOTHERMAL GROUT™[1] Well Sealant NA
PUREGOLD® GEL[1] Well Sealant
Drilling Fluid
NA
PUREGOLD® GROUT[1] Well Sealant NA

[1] This product is designed to be used off-line following manufacturer’s use instructions.
    The well is to be flushed until the turbidity of the water is < 1 NTU before the system
    may be used for drinking water.
[2] This product can be shipped with either the Cetco® or Volclay® prefix.
[3] This product can be shipped with either the Cetco®, Volclay®, or Puregold® prefix.

Sodium Carbonate[4]
Trade Designation Product Function Max Use
SODA ASH Well Drilling Aid NA
SODA ASH DENSE Well Drilling Aid NA
SODIUM CARBONATE Well Drilling Aid NA

[4] These products are designed to be flushed out prior to using the system for drinking
    water.  Before being placed into service, the well is to be properly flushed according
    to the manufacturer’s use instructions.  Certification of these products is based on the
    well drilling model with the following assumptions:
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which the 
      drilling fluid has been added at the manufacturer’s recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on 0.5 acre 
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional 
      amount removed through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such 
      as cavernous limestone.
    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : # 2 USA


Bentonite
Trade Designation Product Function Max Use
ACCOFLOC® 350 Coagulation & Flocculation 200mg/L
ACCOFLOC® 361 Coagulation & Flocculation 200mg/L

Miscellaneous Water Supply Products[1]
Trade Designation Product Function Max Use
BELLE CRUMBLES Well Sealant NA
CETCO®/VOLCLAY® CRUMBLES Well Sealant NA

[1] This product is designed to be flushed out until the turbidity of the water is < 1 NTU.
    Flushing is required before the system may be used for drinking water.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : # 3 USA


Bentonite[WL]
Trade Designation Product Function Max Use
ACCO-FLOW Coagulation & Flocculation
Filtration Aid
200mg/L
ACCOFLOC® 350 Coagulation & Flocculation 200 mg/L
ACCOFLOC® 361 Coagulation & Flocculation 200 mg/L
ACCOFLOC® SDG Coagulation & Flocculation 200 mg/L

[WL] These products are designed to be flushed out prior to using the system for drinking

     water.  The well shall be properly flushed and drained before being placed in service.

Miscellaneous Water Supply Products
Trade Designation Product Function Max Use
BELLE CRUMBLES[1] [2] Well Sealant NA
CETCO®/VOLCLAY® CRUMBLES[1] [2] Well Sealant NA

[1] These products are designed to be used off-line and flushed out prior to using the
    system for drinking water, following manufacturer's use instructions.
[2] The well is to be properly flushed and drained until the turbidity of the water is <1
    NTU.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : # 4 USA


Miscellaneous Water Supply Products
Trade Designation Product Function Max Use
CETCO® COATED TABLETS 1/4"[1] Well Sealant NA
CETCO® COATED TABLETS 3/8"[1] Well Sealant NA

[1] The well is to be properly flushed and drained until the turbidity of the water is <1
    NTU.


Facility : # 5 USA


Miscellaneous Water Supply Products [WL]
Trade Designation Product Function Max Use
BMR (Bentonite Mud Remover)[1] Well Cleaning Aid NA
DPA (Dry Penatrating Agent)[2] Well Cleaning Aid 59 g/L
LBA[3] Corrosion & Scale Control 5%

[1] These products are designed to be flushed out prior to using the system for drinking
    water. The well is to be properly flushed and drained until the turbidity of the water
    is <1 NTU.
[2] Follow manufacturer's use instructions.
[3] A 5% solution of LBA is to be added to the well in accordance with the dosage table
    (e.g., for a 2" well, a 5% solution is to be added at 0.01 gallon per foot of standing
    water).  The well should then be flushed as outlined in the use instructions.
[WL] These products are designed to be flushed out prior to using the system for drinking

     water.  The well shall be properly flushed and drained before being placed in service.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : # 6 USA


Miscellaneous Water Supply Products
Trade Designation Product Function Max Use
BMR (Bentonite Mud Remover)[1] Well Cleaning Aid NA
DPA (Dry Penetrating Acid)[2] [3] [4] Well Cleaning Aid NA
LBA[2] [3] [4] [5] Well Cleaning Aid NA

[1] These products are designed to be flushed out prior to using the system for drinking
    water. The well is to be properly flushed and drained until the turbidity of the water
    is <1 NTU.
[2] This product is designed to be flushed out prior to using the system for drinking water.
    This product must be used according to the manufacturer's use instructions.
[3] The equipment must be disconnected from the system prior to treatment. The well must be
    purged until the pH reaches that of the original water.
[4] The well shall be properly flushed and drained before being placed in service.
[5] A 5% solution of LBA is to be added to the well in accordance with the dosage table
    (e.g., for a 2 inch well, a 5% solution is to be added at 0.01 gallon per foot of
    standing water).

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : # 7 China


Miscellaneous Water Supply Products[1]
Trade Designation Product Function Max Use
CETCO® GRAPHITE112016 Well Sealant NA
CETCO® TC BOOSTER Well Sealant NA

[1] Certified for use as a well sealant additive only when used in conjunction with a well
    sealant grout.  The Sealant is to be mixed at a ratio of not greater than 18 pounds of
    product to 50 pounds of grout.


Facility : # 8 USA


Polyacrylamide[1] [2] [PC]
Trade Designation Product Function Max Use
ACCU-VIS™ Well Drilling Aid NA
INSTA-PAC® Well Drilling Aid NA
INSTA-VIS™ PLUS Well Drilling Aid NA
INSTA-VIS™ PLUS Coagulation & Flocculation 3mg/L
INSTA-VIS™ PLUS Coagulation & Flocculation 3mg/L
SHORE PAC® LIQUID Well Drilling Aid NA

[1] These products are designed to be flushed out prior to using the system for drinking
    water. Before being placed into service, the well is to be properly flushed according to
    the manufacturer's use instructions. Certification of these products is based on the
    well drilling model with the following assumptions: 
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional amount removed 
      through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such 
      as cavernous limestone.
[2] This product is designed to be flushed out prior to using the system for drinking water.
    The well is to be properly flushed and drained before being placed into service. This
    product is to be used according to the manufacturer's use instructions.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

Sodium Polyacrylate[1] [2]
Trade Designation Product Function Max Use
SUPER THIN™ Well Cleaning Aid
Well Drilling Aid
NA

[1] These products are designed to be flushed out prior to using the system for drinking
    water. Before being placed into service, the well is to be properly flushed according to
    the manufacturer's use instructions. Certification of these products is based on the
    well drilling model with the following assumptions: 
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional amount removed 
      through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such 
      as cavernous limestone.
[2] This product is designed to be flushed out prior to using the system for drinking water.
    The well is to be properly flushed and drained before being placed into service. This
    product is to be used according to the manufacturer's use instructions.


Facility : # 16 USA


Polymer Blends[PC] [PY]
Trade Designation Product Function Max Use
INSTA-VIS™ LOW VISCOSITY Well Drilling Aid NA

[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

Sodium Carbonate[1]
Trade Designation Product Function Max Use
SODA ASH Well Drilling Aid NA
SODA ASH DENSE Well Drilling Aid NA
SODIUM CARBONATE Well Drilling Aid NA

[1] These products are designed to be flushed out prior to using the system for drinking
    water.  Before being placed into service, the well is to be properly flushed according
    to the manufacturer’s use instructions.  Certification of these products is based on the
    well drilling model with the following assumptions:
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which the 
      drilling fluid has been added at the manufacturer’s recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on 0.5 acre 
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional 
      amount removed through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such 
      as cavernous limestone.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
      

Facility : # 17 USA


Bentonite[1] [2]
Trade Designation Product Function Max Use
PREMIUM GEL® Drilling Fluid
Well Drilling Aid
NA
SUPER GEL-X® Drilling Fluid
Well Drilling Aid
NA

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] This product is designed to be flushed out until the turbidity of the water is < 1 NTU. 
    Flushing is required before the system may be used for drinking
    water.



 
CETCO 
Colloid Environmental Technologies Co.
2870 Forbs Avenue 
Hoffman Estates, IL 60192 
United States 
800-527-9948 
847-851-1824

Facility : # 12 USA


Miscellaneous Water Supply Products[1] [2]
Trade Designation Product Function Max Use
VERSAFOAM® PLUS Foaming Agent NA

[1] Certification of this product is based on a well drilling model using assumptions stated
    in NSF/ANSI/CAN 60, Section 8 for well drilling foamers.
[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following the manufacturer's use instructions.



 
CETCO 
2870 Forbs Avenue
Hoffman Estates, IL 60192 
United States 
800-527-9948 
847-851-1824
Visit this company's website

Facility : # 15 USA


Miscellaneous Water Supply Products[1] [2]
Trade Designation Product Function Max Use
HERCUL-EZ™ Well Drilling Aid
Drilling Fluid
NA

[1] This product is designed to be flushed out prior to using the system for drinking water.
    Before being placed into service, the well is to be properly flushed according to the
    manufacturer's use instructions.
[2] Certification of this product is based on the well drilling model with the following
    assumptions:
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which the
    drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
    aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to the combined volumes of the casing and the screen, plus an additional amount removed
    through the well disinfection and development (90% removed).



 
CETCO Oilfield Services Company 
1001 Oshsner Boulevard
Suite 425 
Covington, LA 70433 
United States 
985-871-4700

Facility : # 2 USA


Bentonite
Trade Designation Product Function Max Use
ACCOFLOC® 350 Coagulation & Flocculation 200mg/L
ACCOFLOC® 361 Coagulation & Flocculation 200mg/L


Facility : # 3 USA


Bentonite[WL]
Trade Designation Product Function Max Use
ACCOFLOC® 350 Coagulation & Flocculation 200mg/L
ACCOFLOC® 361 Coagulation & Flocculation 200mg/L
ACCOFLOC® SDG Coagulation & Flocculation 200mg/L

[WL] These products are designed to be flushed out prior to using the system for drinking

     water.  The well shall be properly flushed and drained before being placed in service.



 
Niacet Corporation 
400 47th Street
Niagara Falls, NY 14072 
United States 
800-828-1207 
716-285-1474
Visit this company's website

Facility : Niagara Falls, NY


Miscellaneous Treatment Chemical
Trade Designation Product Function Max Use
Sodium Acetate pH Adjustment 500mg/L

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Number of matching Manufacturers is 5
Number of matching Products is 63
Processing time was 0 seconds