NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, November 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=hawkins&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Hawkins Inc | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-617-8505 | |
| Visit this company's website |
Facility : # 20 USA
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 79207 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
| Hawkins Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-617-8505 | |
| Visit this company's website |
Facility : # 20 USA
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| ACS-180 | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk 9707 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9717 | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk 9727 | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk 9747 | Coagulation & Flocculation | 2mg/L |
| Aqua Hawk EL88097 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
| Hawkins Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 | |
| Visit this company's website |
Facility : # 23 USA
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 857 | Coagulation & Flocculation | 2.5mg/L |
| Aqua Hawk 9827 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9847 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9907 | Coagulation & Flocculation | 3.5mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 |
Facility : # 2 USA
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| ECO7040 | Coagulation & Flocculation | 25mg/L |
| ECO7040A | Coagulation & Flocculation | 50mg/L |
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| ECO475 | Coagulation & Flocculation | 10 mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| ECO436 | Coagulation & Flocculation | 20 mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 |
Facility : # 4 USA
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO1801 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO8001 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO1301 | Coagulation & Flocculation | 250mg/L |
| ECO1306 | Coagulation & Flocculation | 250mg/L |
| ECO1521 | Coagulation & Flocculation | 250mg/L |
| ECO1601 | Coagulation & Flocculation | 250mg/L |
| ECO652 | Coagulation & Flocculation | 250mg/L |
| ECO7024 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| ECO1111 | Coagulation & Flocculation | 200mg/L |
| ECO7007 | Coagulation & Flocculation | 200mg/L |
| ECO8010A | Coagulation & Flocculation | 200mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 |
Facility : # 4 USA
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 6527 | Coagulation & Flocculation | 50mg/L |
| ECO 7040 | Coagulation & Flocculation | 25mg/L |
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 8117 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® 860 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® 9057 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® 927 | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk® 957 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® EK256 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® EK604 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® EK606 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® EK608 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® NE801 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® NE803 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk® NP703 | Coagulation & Flocculation | 1mg/L |
| ECO104 | Coagulation & Flocculation | 1mg/L |
| ECO110 | Coagulation & Flocculation | 3mg/L |
| ECO113 | Coagulation & Flocculation | 3mg/L |
| ECO118 | Coagulation & Flocculation | 1mg/L |
| ECO122 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
Facility : # 5 USA
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 6527 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk® MC002 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk® MC302 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk® MC304 | Coagulation & Flocculation | 25mg/L |
| ECO 7040 | Coagulation & Flocculation | 25mg/L |
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® EC205 | Coagulation & Flocculation | 10mg/L |
| Aqua Hawk® EC605 | Coagulation & Flocculation | 10mg/L |
| ECO 209 | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 800-328-5460 | |
| 612-331-6910 | |
| Visit this company's website |
Facility : # 1 St. Paul, MN
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 1010 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Chlorohydrate | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15007 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate/Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15047 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15177 | Coagulation & Flocculation | 218mg/L |
| Aqua Hawk 15247 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15767 | Coagulation & Flocculation | 200mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 10% Iron | Coagulation & Flocculation | 600mg/L |
| Ferric Sulfate 12% Iron | Coagulation & Flocculation | 600mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | Corrosion & Scale Control pH Adjustment |
44 mg/L |
| Hydrochloric Acid | Corrosion & Scale Control pH Adjustment |
40 mg/L |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% FCC | Corrosion & Scale Control pH Adjustment |
93 mg/L |
| Hydrochloric Acid 15% Kosher | Corrosion & Scale Control pH Adjustment |
93 mg/L |
| Hydrochloric Acid 20' | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' FCC | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' Tech | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 22' | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' FCC | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' PC Grade | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' Tech | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 9% | Corrosion & Scale Control pH Adjustment |
155mg/L |
| Hydrochloric Acid, 25% | Corrosion & Scale Control pH Adjustment |
54mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| Inhib. HCL 20' | Corrosion & Scale Control | 44mg/L |
| Inhib. Hydrochloric Acid 20% | Corrosion & Scale Control | 62mg/L |
| Inhib. Hydrochloric Acid 20' | Corrosion & Scale Control | 44mg/L |
| Inhibited Hydrochloric Acid 20' | Corrosion & Scale Control | 44mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15057 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15067 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15167 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15057AC[AL] [PY] | Coagulation & Flocculation | 111mg/L |
| Aqua Hawk 217[PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 4317[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 4337[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 15057D | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 15157D[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 15177A | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 15567[AL] [PY] | Coagulation & Flocculation | 120mg/L |
| Aqua Hawk® 15667[AL] [PY] | Coagulation & Flocculation | 60mg/L |
| Aqua Hawk® 1577[AL] | Coagulation & Flocculation | 259mg/L |
| Aqua Hawk® 2887[AL] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 4257[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 447[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 45057[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 457[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 49257[AL] | Coagulation & Flocculation | 263mg/L |
| Aqua Hawk® P04817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P04827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P04887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P04917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P04927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P04987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05907[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P14817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P14827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P14887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P14917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P14927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P14987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P15817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P15827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P15887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P15917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P15927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P15987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P17817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P17827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P17887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P17917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P17927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P17987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P24817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P24827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P24887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P24917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P24927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P24987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P27817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P27827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P27887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : # 2 Centralia, IL
|
Acetic Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Acetic Acid 50% Technical | Biological Substrate | 300mg/L |
| Acetic Acid 56% FCC | Biological Substrate | 267mg/L |
| Acetic Acid 56% FG | Biological Substrate | 267mg/L |
| Acetic Acid 56% Technical | Biological Substrate | 267mg/L |
| Acetic Acid 80% FG | Biological Substrate | 188mg/L |
| Acetic Acid 80% Technical | Biological Substrate | 188mg/L |
| Acetic Acid 99% Technical | Biological Substrate | 150mg/L |
| Acetic Acid Glacial | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% FG | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% Tech | Biological Substrate | 150mg/L |
[1] This product is designed to function as a reducing agent in biologically active drinking
water treatment systems.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Chloramination | 60mg/L |
| Ammonium Sulfate 35% | Chloramination | 60mg/L |
| Aqua Hawk 347 | Chloramination | 60mg/L |
|
Citric Acid[2] [3] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 15% Solution FCC | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% FCC | Membrane Cleaner | NA |
| Citric Acid 50% FG | Membrane Cleaner | NA |
| Citric Acid 50% Technical | Membrane Cleaner | NA |
[2] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Miscellaneous Water Supply Products[CL] |
||
| Trade Designation | Product Function | Max Use |
| Clearitas 101 | Corrosion & Scale Control | 4000mg/L |
| Clearitas 201 | Corrosion & Scale Control | 4000mg/L |
| Clearitas 301 | Corrosion & Scale Control | 4000mg/L |
| Clearitas 401 | Corrosion & Scale Control | 4000mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| Monosodium Phosphate 45% | Corrosion Control | 30mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 28% | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FCC | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FG | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 30% Tech | Corrosion & Scale Control | 32mg/L |
| Phosphoric Acid 35% Tech | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid 36% Tech | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 36-38% | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 50% | Corrosion & Scale Control | 19mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC/K | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FG | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 85% Tech Grade | Corrosion & Scale Control | 12mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Potassium Hydroxide 45% FG | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Potassium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Potassium Hydroxide 50% FG | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hydroxide[4] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[4] Certified for diaphragm and membrane grades. |
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : # 2 St. Paul, MN
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide 15% | Chloramination | 19mg/L |
| Ammonium Hydroxide 15% (NH3) | Chloramination | 19mg/L |
| Ammonium Hydroxide 19% | Chloramination | 15mg/L |
| Ammonium Hydroxide 19% (NH3) | Chloramination | 15mg/L |
| Ammonium Hydroxide 19% Reagent | Chloramination | 15mg/L |
| Ammonium Hydroxide 25% | Chloramination | 11mg/L |
| Ammonium Hydroxide 25% (NH3) | Chloramination | 11mg/L |
| Ammonium Hydroxide 26' - 3M | Chloramination | 10mg/L |
| Ammonium Hydroxide 26' - COC | Chloramination | 10mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| LPC-31 | Corrosion & Scale Control | 30mg/L |
| LPC-4 | Corrosion & Scale Control | 33mg/L |
| LPC-6 | Corrosion & Scale Control | 36mg/L |
| LPC-60 | Corrosion & Scale Control | 31mg/L |
| LPC-AM | Corrosion & Scale Control | 23mg/L |
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Copper Sulfate[3] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[3] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 7327 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk 7347 | Coagulation & Flocculation | 25mg/L |
| Aqua Hawk 7387 | Coagulation & Flocculation | 50mg/L |
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk® 78057 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 10% | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite (SBS) 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite (SBS) 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite (SBS) 40% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 10% Solution | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite 38% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 40% | Antioxidant Dechlorination |
46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 40% Diaphragm | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 40% Membrane | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 50mg/L |
| Azone 10 | Disinfection & Oxidation | 50mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 50mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Oxidant | 176mg/L |
| Sodium Permanganate 20% | Oxidant | 176mg/L |
| Sodium Permanganate 40% | Oxidant | 88mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| LPC-5 | Corrosion & Scale Control | 27mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 38-40% | Corrosion & Scale Control pH Adjustment |
116mg/L |
| Sulfuric Acid 40% | Corrosion & Scale Control pH Adjustment |
116mg/L |
| Sulfuric Acid 50% | Corrosion & Scale Control pH Adjustment |
91mg/L |
| Sulfuric Acid 50% W/W | pH Adjustment | 91mg/L |
| Sulfuric Acid 66' | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 66' Burner Grade | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 66' Low Hg | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 66' Smelter Grade | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 78% | Corrosion & Scale Control pH Adjustment |
59mg/L |
| Sulfuric Acid 9% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sulfuric Acid 93% | Corrosion & Scale Control pH Adjustment |
50mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| LPC-9 | Corrosion & Scale Control | 13mg/L |
| LPC-96 | Corrosion & Scale Control | 26mg/L |
| LPC-9L | Corrosion & Scale Control | 19mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : #2 Rosemount, MN
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607D | Coagulation & Flocculation | 375mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide 15% | Chloramination | 19mg/L |
| Ammonium Hydroxide 15% (NH3) | Chloramination | 19mg/L |
| Ammonium Hydroxide 19% | Chloramination | 15mg/L |
| Ammonium Hydroxide 19% (NH3) | Chloramination | 15mg/L |
| Ammonium Hydroxide 19% Reagent | Chloramination | 15mg/L |
| Ammonium Hydroxide 25% | Chloramination | 11mg/L |
| Ammonium Hydroxide 25% (NH3) | Chloramination | 11mg/L |
| Ammonium Hydroxide 26' - 3M | Chloramination | 10mg/L |
| Ammonium Hydroxide 26' - COC | Chloramination | 10mg/L |
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 10%[1] | Membrane Cleaner | NA |
| Hydrochloric Acid 10% FCC[1] | Membrane Cleaner | NA |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% FCC | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% Kosher | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 20' | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' FCC | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' Tech | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 22' | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' FCC | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' PC Grade | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' Tech | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 25% Solution | Corrosion & Scale Control pH Adjustment |
54mg/L |
| Hydrochloric Acid 9% | Corrosion & Scale Control pH Adjustment |
155mg/L |
| Hydrochloric Acid, 25% | Corrosion & Scale Control pH Adjustment |
54mg/L |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| Inhib. HCl 20' | Corrosion & Scale Control | 44mg/L |
| Inhib. Hydrochloric Acid 20% | Corrosion & Scale Control | 62mg/L |
| Inhib. Hydrochloric Acid 20' | Corrosion & Scale Control | 44mg/L |
| Inhibited Hydrochloric Acid 20' | Corrosion & Scale Control | 44mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607D | Coagulation & Flocculation | 375mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 107[PY] | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 107H[PY] | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 117[PY] | Coagulation & Flocculation | 80mg/L |
| Aqua Hawk 137[PY] | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 137H[PY] | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 2987[PY] | Coagulation & Flocculation | 20mg/L |
| Aqua Hawk 427[PY] | Coagulation & Flocculation | 256mg/L |
| Aqua Hawk TC597[PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 15057D | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 1577 | Coagulation & Flocculation | 259mg/L |
| Aqua Hawk® 2887 | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 4257 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 447 | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 45057 | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 457 | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sulfur Dioxide |
||
| Trade Designation | Product Function | Max Use |
| Sulfur Dioxide | Dechlorinator & Antioxidant | 10mg/L |
Facility : # 3 St. Paul, MN
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Courtland, AL
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 1010 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15007 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 15047 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15077 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15147 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15177 | Coagulation & Flocculation | 218mg/L |
| Aqua Hawk 15247 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15767 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15047 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15057 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15067 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15077 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15147 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15167 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15177 | Coagulation & Flocculation | 218mg/L |
| Aqua Hawk 15247 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15767 | Coagulation & Flocculation | 200mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 107[PY] | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 107H [PY] | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 117[PY] | Coagulation & Flocculation | 80mg/L |
| Aqua Hawk 1227[PY] | Coagulation & Flocculation | 66mg/L |
| Aqua Hawk 137H[PY] | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 15057A[PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 15077A[PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 15167A[PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 15277[PY] | Coagulation & Flocculation | 300mg/L |
| Aqua Hawk 15677[PY] | Coagulation & Flocculation | 300mg/L |
| Aqua Hawk 2987[PY] | Coagulation & Flocculation | 20mg/L |
| Aqua Hawk 4007[PY] | Coagulation & Flocculation | 158mg/L |
| Aqua Hawk 4017[PY] | Coagulation & Flocculation | 163mg/L |
| Aqua Hawk 427 | Coagulation & Flocculation | 256mg/L |
| Aqua Hawk 4337[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 15057D | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 15567[AL] [PY] | Coagulation & Flocculation | 120mg/L |
| Aqua Hawk® 1577[AL] | Coagulation & Flocculation | 259mg/L |
| Aqua Hawk® 2887[AL] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 402[AL] [PY] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 4257[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 447[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 45057[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 457[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 49257[AL] | Coagulation & Flocculation | 263mg/L |
| Aqua Hawk® P05817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05907[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P27817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P27827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P27887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| GWI 15057A [PY] | Coagulation & Flocculation | 100mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Theodore, AL
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Fort Smith, AR
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 50mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 50mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Scott, AR
|
Acetic Acid[4] |
||
| Trade Designation | Product Function | Max Use |
| Acetic Acid 50% Technical | Biological Substrate | 300mg/L |
| Acetic Acid 56% FCC | Biological Substrate | 267mg/L |
| Acetic Acid 56% FG | Biological Substrate | 267mg/L |
| Acetic Acid 56% Technical | Biological Substrate | 267mg/L |
| Acetic Acid 80% FG | Biological Substrate | 188mg/L |
| Acetic Acid 80% Technical | Biological Substrate | 188mg/L |
| Acetic Acid 99% Technical | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% FG | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% Tech | Biological Substrate | 150mg/L |
[4] This product is designed to function as a reducing agent in biologically active drinking
water treatment systems.
|
||
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO1801 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO1306 | Coagulation & Flocculation | 200mg/L |
| ECO7024 | Coagulation & Flocculation | 200mg/L |
| ECO8001 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
| ECO800 | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| ECO310AS | Disinfection & Oxidation | 60mg/L |
| ECO310AS-2 | Disinfection & Oxidation | 120mg/L |
|
Blended Coagulation Chemicals |
||
| Trade Designation | Product Function | Max Use |
| ECO20AP[AL] [PO] | Coagulation & Flocculation | 300mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
|
||
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| ECO302BC | Corrosion & Scale Control | 26mg/L |
| ECO302CC | Corrosion & Scale Control | 26mg/L |
| ECO302KC | Corrosion & Scale Control | 27mg/L |
| ECO302PC | Corrosion & Scale Control | 18mg/L |
| ECO302RC | Corrosion & Scale Control | 19mg/L |
| ThornPhos 2000 | Corrosion & Scale Control | 28mg/L |
| ThornPhos 3000 | Corrosion & Scale Control | 26mg/L |
| ThornPhos 4300 | Corrosion & Scale Control | 26mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 15% | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 15% FCC | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 15% Kosher | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 20% | pH Adjustment Corrosion & Scale Control |
70mg/L |
| Hydrochloric Acid 20' | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 20' FCC | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 20' Tech | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 22' | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' FCC | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' PC Grade | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' Tech | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 25% Solution | pH Adjustment Corrosion & Scale Control |
54mg/L |
| Hydrochloric Acid 9% | pH Adjustment Corrosion & Scale Control |
155mg/L |
| Hydrochloric Acid, 25% | pH Adjustment Corrosion & Scale Control |
54mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Miscellaneous Chemical Products |
||
| Trade Designation | Product Function | Max Use |
| ECOCLEAR100 | Oxidant | 10mg/L |
|
Miscellaneous Treatment Applications |
||
| Trade Designation | Product Function | Max Use |
| ECOCLEAN100[2] [3] | Other | N/A |
[2] This product is intended for use on filter walls and troughs.
[3] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| ECO304OF | Corrosion & Scale Control | 30mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| ECO304OC | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 28% | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FCC | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FG | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 30% Tech | Corrosion & Scale Control | 32mg/L |
| Phosphoric Acid 35% Tech | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid 36% Tech | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 36-38% | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 50% | Corrosion & Scale Control | 19mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC/K | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FG | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 85% Tech Grade | Corrosion & Scale Control | 12mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| ECO7040 | Coagulation & Flocculation | 25mg/L |
| ECO7040A | Coagulation & Flocculation | 50mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO1306 | Coagulation & Flocculation | 200mg/L |
| ECO1521 | Coagulation & Flocculation | 250mg/L |
| ECO7024 | Coagulation & Flocculation | 200mg/L |
| ECO8001 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| ECO209 | Coagulation & Flocculation | 10mg/L |
| ECO475 | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Polymer Blends[AL] |
||
| Trade Designation | Product Function | Max Use |
| ECO2010C50[PY] | Coagulation & Flocculation | 200mg/L |
| ECO4011FB30 | Coagulation & Flocculation | 250mg/L |
| ECO4011FB60 | Coagulation & Flocculation | 250mg/L |
| ECO4011GB30 | Coagulation & Flocculation | 250mg/L |
| ECO4011GB50 | Coagulation & Flocculation | 250mg/L |
| ECO8011AA50 | Coagulation & Flocculation | 250mg/L |
| ECO8031C[PY] | Coagulation & Flocculation | 105mg/L |
| ECO8051AB400 | Coagulation & Flocculation | 62mg/L |
| ECO8063[PY] | Coagulation & Flocculation | 150mg/L |
| ECO810A10[PY] | Coagulation & Flocculation | 150mg/L |
| ECO810C10[PY] | Coagulation & Flocculation | 150mg/L |
| ECO810C200[PY] | Coagulation & Flocculation | 50mg/L |
| ECO810C25[PY] | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sodium Aluminate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Aluminate 38% | Coagulation & Flocculation | 105mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 25% Diaphragm | pH Adjustment | 200mg/L |
| Sodium Hydroxide 25% Membrane | pH Adjustment | 200mg/L |
| Sodium Hydroxide 40% Diaphragm | pH Adjustment | 100mg/L |
| Sodium Hydroxide 40% Membrane | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% Diaphragm | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% Membrane | pH Adjustment | 100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate[PO] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Oxidant | 176mg/L |
| Sodium Permanganate 20% | Oxidant | 176mg/L |
| Sodium Permanganate 40% | Oxidant | 88mg/L |
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| ECO303PD | Corrosion & Scale Control | 25mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 38-40% | pH Adjustment Corrosion & Scale Control |
116mg/L |
| Sulfuric Acid 40% | pH Adjustment Corrosion & Scale Control |
116mg/L |
| Sulfuric Acid 50% | pH Adjustment Corrosion & Scale Control |
91mg/L |
| Sulfuric Acid 50% W/W | pH Adjustment Corrosion & Scale Control |
91mg/L |
| Sulfuric Acid 66' | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Burner Grade | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Low Hg | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Smelter Grade | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 78% | pH Adjustment Corrosion & Scale Control |
59mg/L |
| Sulfuric Acid 9% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sulfuric Acid 93% | pH Adjustment Corrosion & Scale Control |
50mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ECO301AE | Corrosion & Scale Control | 25mg/L |
| ECO301BC | Corrosion & Scale Control | 16mg/L |
| ECO301BD | Corrosion & Scale Control | 16mg/L |
| ECO301BE | Corrosion & Scale Control | 26mg/L |
| ECO301CD | Corrosion & Scale Control | 25mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
Facility : Apopka, FL
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 50% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Chloramination | 60mg/L |
| Ammonium Sulfate 35% | Chloramination | 60mg/L |
| Aqua Hawk 347 | Chloramination | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| ClearFlow PT 2536 | Corrosion & Scale Control | 24mg/L |
| ClearFlow PT 3032 | Corrosion & Scale Control | 24mg/L |
| ClearFlow PT 3434 | Corrosion & Scale Control | 27mg/L |
| ClearFlow PT 4036 | Corrosion & Scale Control | 24mg/L |
| ClearFlow PT 5036 | Corrosion & Scale Control | 24mg/L |
| ClearFlow PT 6036 | Corrosion & Scale Control | 24mg/L |
| ClearFlow PT 7036 | Corrosion & Scale Control | 24mg/L |
| ClearFlow PT 8037 | Corrosion & Scale Control | 25mg/L |
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 15% Solution FCC | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% FCC | Membrane Cleaner | NA |
| Citric Acid 50% FG | Membrane Cleaner | NA |
| Citric Acid 50% Technical | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all
traces of the product have been removed before placing into service.
|
||
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| HFS 2300 23% | Fluoridation | 5mg/L |
| HFS4000 40% | Fluoridation | 3mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 20% | Fluoridation | 6mg/L |
| Hydrofluosilicic Acid 23% | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 40% | Fluoridation | 3mg/L |
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| ClearFlow OT 3535 | Corrosion & Scale Control | 25mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| ClearFlow OT 7272 | Corrosion & Scale Control | 12mg/L |
| Phosphoric Acid 28% | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FCC | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FG | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 30% Tech | Corrosion & Scale Control | 32mg/L |
| Phosphoric Acid 35% Tech | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid 36% Tech | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 36-38% | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 50% | Corrosion & Scale Control | 19mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC/K | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FG | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 85% Tech Grade | Corrosion & Scale Control | 12mg/L |
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 40% | Dechlorinator & Antioxidant | 46mg/L |
|
Sodium Hydroxide[3] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 25% Diaphragm | pH Adjustment | 200mg/L |
| Sodium Hydroxide 25% Membrane | pH Adjustment | 200mg/L |
| Sodium Hydroxide 40% Diaphragm | pH Adjustment | 100mg/L |
| Sodium Hydroxide 40% Membrane | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% Diaphragm | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% Membrane | pH Adjustment | 100mg/L |
[3] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone-15 | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| ClearFlow PT 3737 | Corrosion & Scale Control | 25mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 30% | pH Adjustment Corrosion & Scale Control |
318mg/L |
| Sulfuric Acid 38-40% | pH Adjustment Corrosion & Scale Control |
116mg/L |
| Sulfuric Acid 40% | pH Adjustment Corrosion & Scale Control |
116mg/L |
| Sulfuric Acid 50% | pH Adjustment Corrosion & Scale Control |
91mg/L |
| Sulfuric Acid 50% W/W | pH Adjustment Corrosion & Scale Control |
91mg/L |
| Sulfuric Acid 66' | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Burner Grade | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Low Hg | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Smelter Grade | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 78% | pH Adjustment Corrosion & Scale Control |
59mg/L |
| Sulfuric Acid 9% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sulfuric Acid 93% | pH Adjustment Corrosion & Scale Control |
50mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Big Pine Key, FL
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
Facility : Brooker, FL
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Hollywood, FL
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Labelle, FL
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone-15 | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 38% - 40% | pH Adjustment Corrosion & Scale Control |
116mg/L |
| Sulfuric Acid 50% | pH Adjustment Corrosion & Scale Control |
91mg/L |
| Sulfuric Acid 66' | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Burner Grade | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Low Hg | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 66' Smelter Grade | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Sulfuric Acid 93% | pH Adjustment Corrosion & Scale Control |
50mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Webster, FL
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Swainsboro, GA
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Thomasville, GA
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone-15 | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Please refer to Hawkins SOP-0186 for the approved tamper-evident procedure on milk-run
deliveries.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Centralia, IL
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| ADC-9612 | Coagulation & Flocculation | 175mg/L |
| Aluminum Chlorohydrate | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 2027 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 657 | Coagulation & Flocculation | 175mg/L |
| Aqua Hawk® 15157 | Coagulation & Flocculation | 250mg/L |
| EC-309 | Coagulation & Flocculation | 175mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 13% | Chloramination | 184mg/L |
| AS 4000 40% | Chloramination | 60mg/L |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
| Ammonium Sulfate 35% | Chloramination | 60mg/l |
| Aqua Hawk 347 | Chloramination | 60mg/L |
|
Miscellaneous Chemical Products |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk CS | Coagulation & Flocculation | 3333mg/L |
| Aqua Hawk CS-CP0.5 | Coagulation & Flocculation | 6000mg/L |
| Aqua Hawk CS-CP1 | Coagulation & Flocculation | 3333mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 7327 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk 7347 | Coagulation & Flocculation | 25mg/L |
| Aqua Hawk 7387 | Coagulation & Flocculation | 50mg/L |
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 7907 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 79277 | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk® 78057 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ADC-9612 | Coagulation & Flocculation | 175mg/L |
| Aluminum Chlorohydrate | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 2027 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 657 | Coagulation & Flocculation | 175mg/L |
| Aqua Hawk® 15157 | Coagulation & Flocculation | 250mg/L |
| EC-309 | Coagulation & Flocculation | 175mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 7247 | Coagulation & Flocculation | 10mg/L |
| Aqua Hawk 7257 | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
[1] This product is designed to function as a reducing agent in biologically active drinking
water treatment systems.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Dupo, IL
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Fluosilicic Acid 23% - 25% | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 23% | Fluoridation | 5mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 20% | pH Adjustment Corrosion & Scale Control |
70mg/L |
| Hydrochloric Acid 22' | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 25% | pH Adjustment Corrosion & Scale Control |
54mg/L |
| Inhib. Hydrochloric Acid 20' | pH Adjustment Corrosion & Scale Control |
44mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda, Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 10 | Disinfection & Oxidation | 50mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| KC-615 | Disinfection & Oxidation | 40mg/L |
| KC-617 | Disinfection & Oxidation | 40mg/L |
| Sanygen | Disinfection & Oxidation | 74mg/L |
| Sanygen Industrial Chlor | Disinfection & Oxidation | 74mg/L |
| Sodium Hypo. 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 20% | Disinfection & Oxidation | 34mg/L |
| Sodium Hypochlorite 5.25% | Disinfection & Oxidation | 95mg/L |
| Vertex CSS-10 | Disinfection & Oxidation | 50mg/L |
| Vertex CSS-10 (R) | Disinfection & Oxidation | 50mg/L |
| Vertex CSS-12 | Disinfection & Oxidation | 40mg/L |
| Vertex CSS-16 | Disinfection & Oxidation | 34mg/L |
| Vertex CSS-5 | Disinfection & Oxidation | 95mg/L |
| Vertex Concentrate 10% | Disinfection & Oxidation | 50mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Havana, IL
|
Calcium Chloride |
||
| Trade Designation | Product Function | Max Use |
| Calcium Chloride 22% | Defluoridation Softener |
200mg/L |
| Calcium Chloride 30% | Defluoridation Softener |
200mg/L |
| Calcium Chloride 30% FCC | Defluoridation Softener |
200mg/L |
| Calcium Chloride 32% | Defluoridation Softener |
200mg/L |
| Calcium Chloride 32% FCC | Defluoridation Softener |
200mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : University Park, IL
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Muncie, IN
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
[1] The Certification of this product has been restricted to a maximum use level (MUL) that
is less than the 10 ppm typical use level of chlorine specified for hypoclorite products
under NSF/ANSI/CAN 60.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Camanche, IA
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 20' | Corrosion & Scale Control pH Adjustment |
43mg/L |
| Inhib. Hydrochloric Acid 20' | Corrosion & Scale Control pH Adjustment |
44mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda, Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 10 | Disinfection & Oxidation | 50mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| KC-615 | Disinfection & Oxidation | 40mg/L |
| KC-617 | Disinfection & Oxidation | 40mg/L |
| Sanygen | Disinfection & Oxidation | 74mg/L |
| Sanygen Industrial Chlor | Disinfection & Oxidation | 74mg/L |
| Sodium Hypo. 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 20% | Disinfection & Oxidation | 34mg/L |
| Sodium Hypochlorite 5.25% | Disinfection & Oxidation | 95mg/L |
| Vertex CSS-10 | Disinfection & Oxidation | 50mg/L |
| Vertex CSS-10 (R) | Disinfection & Oxidation | 50mg/L |
| Vertex CSS-12 | Disinfection & Oxidation | 40mg/L |
| Vertex CSS-16 | Disinfection & Oxidation | 34mg/L |
| Vertex CSS-5 | Disinfection & Oxidation | 95mg/L |
| Vertex Concentrate 10% | Disinfection & Oxidation | 50mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
Facility : Distribution Center - Slater, IA
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Garnett, KS
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
| Aqua Hawk® 347 | Disinfection & Oxidation | 60mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Polymer Blends[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 457 | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Frankfort, KY
|
Miscellaneous Chemical Products |
||
| Trade Designation | Product Function | Max Use |
| Acticarb PS900F | Coagulation & Flocculation | 500mg/L |
| Activated Carbon - PAC | Coagulation & Flocculation | 500mg/L |
| Aqua Hawk CS-CP1 | Coagulation & Flocculation | 3333mg/L |
| AquaSorb CP1 | Coagulation & Flocculation | 500mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® MC704 | Coagulation & Flocculation | 25mg/L |
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 61347 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion & Scale Control |
166mg/L |
| Sodium Hydroxide 38% | pH Adjustment Corrosion & Scale Control |
130mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 50% FG | pH Adjustment Corrosion & Scale Control |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Sulphur, LA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Chloramination | 60mg/L |
| Ammonium Sulfate 35% | Chloramination | 60mg/L |
| Aqua Hawk 347 | Chloramination | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| OP-179A | Corrosion & Scale Control | 26mg/L |
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 15% Solution FCC | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% FCC | Membrane Cleaner | NA |
| Citric Acid 50% FG | Membrane Cleaner | NA |
| Citric Acid 50% Technical | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Copper Sulfate[5] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[5] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 15% | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 15% FCC | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 15% Kosher | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 20% | pH Adjustment Corrosion & Scale Control |
70mg/L |
| Hydrochloric Acid 20' | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 20' FCC | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 20' Tech | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 22' | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' FCC | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' PC Grade | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' Tech | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 25% Solution | pH Adjustment Corrosion & Scale Control |
54mg/L |
| Hydrochloric Acid 9% | pH Adjustment Corrosion & Scale Control |
155mg/L |
| Hydrochloric Acid, 25% | pH Adjustment Corrosion & Scale Control |
54mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 20% | Fluoridation | 6mg/L |
| Hydrofluosilicic Acid 23% | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 40% | Fluoridation | 3mg/L |
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| MSP Solution | Corrosion & Scale Control | 27mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 28% | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FCC | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 30% Tech | Corrosion & Scale Control | 32mg/L |
| Phosphoric Acid 35% Tech | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid 36% Tech | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 36-38% | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 50% | Corrosion & Scale Control | 19mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC/K | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 85% Tech Grade | Corrosion & Scale Control | 12mg/L |
|
Polymer Blends [PY] [ZN] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 107 | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 107H | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 117 | Coagulation & Flocculation | 80mg/L |
| Aqua Hawk 137 | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 137H | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 2987 | Coagulation & Flocculation | 20mg/L |
| Aqua Hawk 427 | Coagulation & Flocculation | 256mg/L |
| Aqua Hawk TC597 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 457[AL] | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Sodium Bisulfite[4] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 10% | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite (SBS) 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite (SBS) 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite (SBS) 40% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 10% Solution | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite 38% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 40% | Antioxidant Dechlorination |
46mg/L |
[4] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide[2] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 40% Diaphragm | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 40% Membrane | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[2] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate[3] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Oxidant | 176mg/L |
| Sodium Permanganate 20% | Oxidant | 176mg/L |
| Sodium Permanganate 40% | Oxidant | 88mg/L |
[3] The finished drinking water should be monitored to ensure that levels of manganese do
not exceed 0.05 mg/L.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| SH-103 | Corrosion & Scale Control | 26mg/L |
| Sodium Hexametaphosphate Sol. | Corrosion & Scale Control | 26mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 38-40% | Corrosion & Scale Control | 116mg/L |
| Sulfuric Acid 40% | Corrosion & Scale Control | 116mg/L |
| Sulfuric Acid 50% | Corrosion & Scale Control | 91mg/L |
| Sulfuric Acid 50% W/W | Corrosion & Scale Control | 91mg/L |
| Sulfuric Acid 66' | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Burner Grade | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Low Hg | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Smelter Grade | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 78% | Corrosion & Scale Control | 59mg/L |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| TKPP Sol. | Corrosion & Scale Control | 28mg/L |
| TKPP Solution | Corrosion & Scale Control | 28mg/L |
| TP-1120 | Corrosion & Scale Control | 50mg/L |
| TP-1122 | Corrosion & Scale Control | 42mg/L |
| TP-1124 | Corrosion & Scale Control | 28mg/L |
| TP-1126 Alabama | Corrosion & Scale Control | 28mg/L |
| TP-1126 Bastrop | Corrosion & Scale Control | 29mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ZO180-Alabama | Corrosion & Scale Control | 28mg/L |
| ZO180-ZC | Corrosion & Scale Control | 28mg/L |
| ZO190-ZC | Corrosion & Scale Control | 24mg/L |
| ZO200-ZC | Corrosion & Scale Control | 22mg/L |
| ZO210-ZC | Corrosion & Scale Control | 21mg/L |
| ZO210-ZC-8032 | Corrosion & Scale Control | 28mg/L |
| ZO285-ZC | Corrosion & Scale Control | 9mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Minneapolis, MN
|
Acetic Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Acetic Acid 50% Technical | Biological Substrate | 300mg/L |
| Acetic Acid 56% FCC | Biological Substrate | 267mg/L |
| Acetic Acid 56% FG | Biological Substrate | 267mg/L |
| Acetic Acid 56% Technical | Biological Substrate | 267mg/L |
| Acetic Acid 80% FG | Biological Substrate | 188mg/L |
| Acetic Acid 80% Technical | Biological Substrate | 188mg/L |
| Acetic Acid 99% Technical | Biological Substrate | 150mg/L |
| Acetic Acid Glacial | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% FG | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% Tech | Biological Substrate | 150mg/L |
[1] This product is designed to function as a reducing agent in biologically active drinking
water treatment systems.
|
||
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 1010 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15047 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15147 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15177 | Coagulation & Flocculation | 218mg/L |
| Aqua Hawk 15247 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15767 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 5167 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate/Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 607D | Coagulation & Flocculation | 375mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150 mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150 mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide 15% | Chloramination | 19mg/L |
| Ammonium Hydroxide 15% (NH3) | Chloramination | 19 mg/L |
| Ammonium Hydroxide 19% | Chloramination | 15mg/L |
| Ammonium Hydroxide 19% (NH3) | Chloramination | 15 mg/L |
| Ammonium Hydroxide 25% | Chloramination | 11mg/L |
| Ammonium Hydroxide 25% (NH3) | Chloramination | 11mg/L |
| Ammonium Hydroxide 26' - 3M | Chloramination | 10mg/L |
| Ammonium Hydroxide 26' - COC | Chloramination | 10mg/L |
| Ammounium Hydroxide 19% Reagent | Chloramination | 15mg/L |
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Chloramination | 60mg/L |
| Ammonium Sulfate 35% | Chloramination | 60mg/L |
| Aqua Hawk 347 | Chloramination | 60mg/L |
|
Blended Coagulation Chemicals [AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 127 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15597 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 6027[2] | Coagulation & Flocculation | 256mg/L |
[2] This product contains copper and may increase the amount of copper present in the
finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| AmPhos 37 | Corrosion & Scale Control | 23mg/L |
| AmPhos 55 | Corrosion & Scale Control | 23mg/L |
| Aqua-Mag | Corrosion & Scale Control | 23mg/L |
| CARUS™ 8600 | Corrosion & Scale Control Sequestering |
18mg/L |
| Carus 8500 | Corrosion & Scale Control | 18mg/L |
| F-35 | Corrosion & Scale Control | 18mg/L |
| K-5 | Corrosion & Scale Control | 23mg/L |
| LPC-132 | Corrosion & Scale Control | 30mg/L |
| LPC-132 Plus | Corrosion & Scale Control | 30mg/L |
| LPC-1568 | Corrosion & Scale Control | 27mg/L |
| LPC-31 | Corrosion & Scale Control | 30mg/L |
| LPC-31 Plus | Corrosion & Scale Control | 30mg/L |
| LPC-4 | Corrosion & Scale Control | 33mg/L |
| LPC-4 Plus | Corrosion & Scale Control | 30mg/L |
| LPC-46 | Corrosion & Scale Control | 27mg/L |
| LPC-6 | Corrosion & Scale Control | 36mg/L |
| LPC-60 | Corrosion & Scale Control | 31mg/L |
| LPC-AM | Corrosion & Scale Control | 23mg/L |
| LPC-AM Plus | Corrosion & Scale Control | 23mg/L |
|
Calcium Chloride |
||
| Trade Designation | Product Function | Max Use |
| Calcium Chloride 22% | Softener Defluoridation |
200mg/L |
| Calcium Chloride 30% | Softener Defluoridation |
200mg/L |
| Calcium Chloride 30% FCC | Defluoridation Softener |
200mg/L |
| Calcium Chloride 32% | Softener Defluoridation |
200mg/L |
| Calcium Chloride 32% FCC | Defluoridation Softener |
200mg/L |
|
Citric Acid[3] [4] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 15% Solution FCC | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% FCC | Membrane Cleaner | NA |
| Citric Acid 50% FG | Membrane Cleaner | NA |
[3] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Copper Sulfate[5] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[5] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Dipotassium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| LPC-DP | Corrosion & Scale Control | 30mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 10% Iron | Coagulation & Flocculation | 600mg/L |
| Ferric Sulfate 12% Iron | Coagulation & Flocculation | 600mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 10%[3] | Membrane Cleaner | NA |
| Hydrochloric Acid 10% FCC[3] | Membrane Cleaner | NA |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% FCC | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% Kosher | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 20' FCC | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' Tech | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20’ | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 22' FCC | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' PC Grade | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' Tech | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22’ | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 25% Solution | Corrosion & Scale Control pH Adjustment |
54mg/L |
| Hydrochloric Acid 9% | Corrosion & Scale Control pH Adjustment |
155mg/L |
| Hydrochloric Acid, 25% | Corrosion & Scale Control pH Adjustment |
54mg/L |
[3] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5 mg/L |
|
Manganese Sulfate[10] |
||
| Trade Designation | Product Function | Max Use |
| Manganese Sulfate 20% | Other | 4mg/L |
| Manganese Sulfate 29% | Other | 3mg/L |
| Manganese Sulfate 29% Mono | Other | 3mg/L |
[10] Manganese sulfate is used in combination with potassium (or sodium) permanganate to
produce hydrous manganese oxides (HMO's) which are used to adsorb positively charged
ions, such as radium.
The finished drinking water should be monitored to ensure that levels of manganese do
not exceed 0.05 mg/L.
|
||
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 307 | Corrosion & Scale Control | 7mg/L |
| TonkaZorb 3%[6] [7] | Other | 100mg/L |
[6] The finished drinking water should be monitored to ensure that levels of manganese do
not exceed 0.05 mg/L.
[7] This product has been Certified for use upstream of sand filtration. It is intended to
be removed during periodic backflushing of the sand filter.
|
||
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| Monosodium Phosphate 45% | Corrosion Control | 30mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 28% | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FCC | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FG | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 30% Tech | Corrosion & Scale Control | 32mg/L |
| Phosphoric Acid 35% Tech | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid 36% Tech | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 36-38% | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 50% | Corrosion & Scale Control | 19mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC/K | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FG | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 85% Tech Grade | Corrosion & Scale Control | 12mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 6527 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk 6547 | Coagulation & Flocculation | 25mg/L |
| Aqua Hawk 7327 | Coagulation & Flocculation | 50mg/L |
| Aqua Hawk 7347 | Coagulation & Flocculation | 25mg/L |
| Aqua Hawk 7387 | Coagulation & Flocculation | 50mg/L |
| Magnafloc LT-7992 | Coagulation & Flocculation | 50mg/L |
| Magnafloc LT-7994 | Coagulation & Flocculation | 25mg/L |
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 7957 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 927 | Coagulation & Flocculation | 1mg/L |
| Aqua Hawk 957 | Coagulation & Flocculation | 3mg/L |
| Aqua Hawk 9827 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9847 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9907 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9937 | Coagulation & Flocculation | 3.5mg/L |
| Aqua Hawk 9957 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 15047 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15057 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15147 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15177 | Coagulation & Flocculation | 218mg/L |
| Aqua Hawk 15247 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15357 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15767 | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 5167 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 7247 | Coagulation & Flocculation | 10mg/L |
| Aqua Hawk 7257 | Coagulation & Flocculation | 10mg/L |
| Magnafloc LT-7990 | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 107[AL] [PY] | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 107H[AL] [PY] | Coagulation & Flocculation | 40mg/L |
| Aqua Hawk 117[AL] [PY] | Coagulation & Flocculation | 80mg/L |
| Aqua Hawk 1227[AL] [PY] | Coagulation & Flocculation | 66mg/L |
| Aqua Hawk 137[AL] [PY] | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 137H[AL] [PY] | Coagulation & Flocculation | 33mg/L |
| Aqua Hawk 15057A[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 15057AC[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 15077A[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 15167A[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk 217[PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 2757[AL] | Coagulation & Flocculation | 77mg/L |
| Aqua Hawk 2987[AL] [PY] | Coagulation & Flocculation | 20mg/L |
| Aqua Hawk 301 | Coagulation & Flocculation | 127mg/L |
| Aqua Hawk 4007[AL] [PY] | Coagulation & Flocculation | 158mg/L |
| Aqua Hawk 4017[AL] [PY] | Coagulation & Flocculation | 163mg/L |
| Aqua Hawk 427[AL] [PY] | Coagulation & Flocculation | 256mg/L |
| Aqua Hawk 4337[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 4337[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 4917A[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 7257[AL] [PY] | Coagulation & Flocculation | 20mg/L |
| Aqua Hawk 7777(E)[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk D2707[AL] [PY] | Coagulation & Flocculation | 111mg/L |
| Aqua Hawk SKMA7[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk TC597[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk TC597[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk TL7[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 102[PY] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 15057D[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 15157D[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 15177A | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 15567[11] [AL] | Coagulation & Flocculation | 120mg/L |
| Aqua Hawk® 15667[11] [AL] | Coagulation & Flocculation | 60mg/L |
| Aqua Hawk® 1577[AL] | Coagulation & Flocculation | 259mg/L |
| Aqua Hawk® 2887[AL] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 402[AL] [PY] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 4257[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 447[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 45057[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 457[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 49257[AL] | Coagulation & Flocculation | 263mg/L |
| Aqua Hawk® MAT376 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P04817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P04827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P04887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P04917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P04927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P04987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P05907[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P05987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P14817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P14827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P14887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P14917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P14927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P14987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P15817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P15827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P15887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P15917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P15927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P15987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P16917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P16987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P17817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P17827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P17887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P17917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P17927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P17987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P24817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P24827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P24887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P24917[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P24927[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P24987[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® P27817[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P27827[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® P27887[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® SKMA17[AL] [PY] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® SKMA37[AL] [PY] | Coagulation & Flocculation | 200mg/L |
| GWI 15057A[AL] [PY] | Coagulation & Flocculation | 100mg/L |
[11] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water should not exceed 2 mg/L.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 45% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Aluminate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Aluminate 38% | Coagulation & Flocculation | 40mg/L |
| Sodium Aluminate 38% Solution | Coagulation & Flocculation | 40mg/L |
| Sodium Aluminate 40% | Coagulation & Flocculation | 40mg/L |
| Sodium Aluminate 45% | Coagulation & Flocculation | 40mg/L |
| Sodium Aluminate 45% Solution | Coagulation & Flocculation | 40mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[8] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 10% | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite (SBS) 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite (SBS) 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite (SBS) 40% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 10% Solution | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite 38% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 40% | Dechlorination Antioxidant |
46mg/L |
[8] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| Soda Ash 16% | Corrosion & Scale Control pH Adjustment |
769mg/L |
| Soda Ash 16% FCC | Corrosion & Scale Control pH Adjustment |
769mg/L |
| Soda Ash 16% FG | Corrosion & Scale Control pH Adjustment |
769mg/L |
| Soda Ash 16% High Purity | Corrosion & Scale Control pH Adjustment |
769mg/L |
|
Sodium Hydroxide[9] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[9] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48 mg/L |
| Azone 15 | Disinfection & Oxidation | 40 mg/L |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48 mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40 mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40 mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Oxidant | 176mg/L |
| Sodium Permanganate 20% | Oxidant | 176mg/L |
| Sodium Permanganate 40% | Oxidant | 88mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| CARUS™ 1100 | Sequestering Corrosion & Scale Control |
22mg/L |
| HWTG – Bleach and Alkali Conditioner | Corrosion & Scale Control | 27mg/L |
| LPC-5 | Corrosion & Scale Control | 27mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Silicate | Corrosion & Scale Control | 42 mg/L |
| Sodium Silicate SS5 | Corrosion & Scale Control | 42mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 38-40% | Corrosion & Scale Control | 116mg/L |
| Sulfuric Acid 40% | Corrosion & Scale Control | 116mg/L |
| Sulfuric Acid 50% W/W | Corrosion & Scale Control | 91mg/L |
| Sulfuric Acid 66' | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Burner Grade | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Low Hg | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Low Hg | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Smelter Grade | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 78% | Corrosion & Scale Control | 59mg/L |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| CARUS™ 3280 | Corrosion & Scale Control | 15mg/L |
| LPC-9 | Corrosion & Scale Control | 13mg/L |
| LPC-96 | Corrosion & Scale Control | 26mg/L |
| LPC-9L | Corrosion & Scale Control | 19mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Rosemount, MN
|
Acetic Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Acetic Acid 50% Technical | Biological Substrate | 300mg/L |
| Acetic Acid 56% FCC | Biological Substrate | 267mg/L |
| Acetic Acid 56% FG | Biological Substrate | 267mg/L |
| Acetic Acid 56% Technical | Biological Substrate | 267mg/L |
| Acetic Acid 80% FG | Biological Substrate | 188mg/L |
| Acetic Acid 80% Technical | Biological Substrate | 188mg/L |
| Acetic Acid 99% Technical | Biological Substrate | 150mg/L |
| Acetic Acid Glacial | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% FG | Biological Substrate | 150mg/L |
| Acetic Acid Glacial 99.5% Tech | Biological Substrate | 150mg/L |
[1] This product is designed to function as a reducing agent in biologically active drinking
water treatment systems.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Chloramination | 60mg/L |
| Aqua Hawk 347 | Chloramination | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| LPC-31 | Corrosion & Scale Control | 30mg/L |
| LPC-4 | Corrosion & Scale Control | 33mg/L |
| LPC-46 | Corrosion & Scale Control | 27mg/L |
| LPC-AM | Corrosion & Scale Control | 23mg/L |
|
Hydrogen Peroxide[2] [HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 12% | Oxidant | 8.7mg/L |
| Hydrogen Peroxide 20% | Oxidant | 5.2mg/L |
| Hydrogen Peroxide 25% | Oxidant | 4mg/L |
| Hydrogen Peroxide 25% FG | Oxidant | 4mg/L |
| Hydrogen Peroxide 27% FG | Oxidant | 3.8mg/L |
| Hydrogen Peroxide 3% | Oxidant | 35mg/L |
| Hydrogen Peroxide 30% | Oxidant | 3.5mg/L |
| Hydrogen Peroxide 31% | Oxidant | 3.3mg/L |
| Hydrogen Peroxide 32% | Oxidant | 3.2mg/L |
| Hydrogen Peroxide 34% | Oxidant | 3mg/L |
| Hydrogen Peroxide 35% | Oxidant | 3mg/L |
| Hydrogen Peroxide 50% | Oxidant | 2.1mg/L |
| Hydrogen Peroxide 7% | Oxidant | 15mg/L |
[2] Certified for food, standard and technical grades.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Manganese Sulfate[3] |
||
| Trade Designation | Product Function | Max Use |
| Manganese Sulfate 20% | Other | 4mg/L |
| Manganese Sulfate 29% | Other | 3mg/L |
| Manganese Sulfate 29% Mono | Other | 3mg/L |
[3] Manganese sulfate is used in combination with potassium (or sodium) permanganate to
produce hydrous manganese oxides (HMO's) which are used to adsorb positively charged
ions, such as radium.
The finished drinking water should be monitored to ensure that levels of manganese do
not exceed 0.05 mg/L.
|
||
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 28% | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FCC | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 28% FG | Corrosion & Scale Control | 34mg/L |
| Phosphoric Acid 30% Tech | Corrosion & Scale Control | 32mg/L |
| Phosphoric Acid 35% Tech | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid 36% Tech | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 36-38% | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 50% | Corrosion & Scale Control | 19mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FCC/K | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% FG | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 85% Tech Grade | Corrosion & Scale Control | 12mg/L |
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 4337[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk SKMA7[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 15057D[AL] | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk® 1577[AL] | Coagulation & Flocculation | 259mg/L |
| Aqua Hawk® 2887[AL] | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk® 4257[AL] | Coagulation & Flocculation | 200mg/L |
| Aqua Hawk® 447[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 45057[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 457[AL] | Coagulation & Flocculation | 150mg/L |
| Aqua Hawk® 49257[AL] | Coagulation & Flocculation | 263mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 45% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion & Scale Control |
166mg/L |
| Sodium Hydroxide 38% | pH Adjustment Corrosion & Scale Control |
130mg/L |
| Sodium Hydroxide 40% Diaphragm | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 40% Membrane | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 50% FG | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| HWTG – Bleach and Alkali Conditioner | Corrosion & Scale Control | 27mg/L |
| LPC-5 | Corrosion & Scale Control | 27mg/L |
[4] Certified for diaphragm and membrane grades.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Columbia, MO
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
| Vertex Concentrate 10% | Disinfection & Oxidation | 50mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Billings, MT
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
Facility : Roca, NE
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | 25mg/L | |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Distribution Center - Fargo, ND
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Washburn, ND
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 40% Diaphragm | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 40% Membrane | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : New Philadelphia, OH
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Tulsa, OK
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg |
Facility : Greenville, SC
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Black Hawk, SD
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Sioux Falls, SD
|
Aluminum Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
| Aqua Hawk 347 | Disinfection & Oxidation | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| LPC-31 | Corrosion & Scale Control | 30mg/L |
| LPC-6 | Corrosion & Scale Control | 36mg/L |
| LPC-60 | Corrosion & Scale Control | 31mg/L |
| LPC-AM | Corrosion & Scale Control | 23mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 40% Diaphragm | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 40% Membrane | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| HWTG - Bleach and Alkali Conditioner | Corrosion & Scale Control | 27mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Fayetteville, TN
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| ADC-9612 | Coagulation & Flocculation | 175mg/L |
| Aluminum Chlorohydrate | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15077 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15177 | Coagulation & Flocculation | 218mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 657 | Coagulation & Flocculation | 175mg/L |
| EC-309 | Coagulation & Flocculation | 175mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Alum | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Coagulation Chemicals[AL] |
||
| Trade Designation | Product Function | Max Use |
| EC-609 | Coagulation & Flocculation | 272mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| AmPhos 37 | Corrosion & Scale Control | 23mg/L |
| AmPhos 55 | Corrosion & Scale Control | 23mg/L |
| Aqua Mag | Corrosion & Scale Control | 23mg/L |
| CARUS™ 8600 | Corrosion & Scale Control Sequestering |
18mg/L |
| Carus 8500 | Corrosion & Scale Control | 18mg/L |
| F-35 | Corrosion & Scale Control | 18mg/L |
| K-5 | Corrosion & Scale Control | 23mg/L |
|
Calcium Thiosulfate |
||
| Trade Designation | Product Function | Max Use |
| Captor[1] | Dechlorination Ozone Reduction |
50mg/L |
[1] This product is to be used for the destruction of residual chlorine. It should be
applied only to the extent necessary to ensure chlorine removal. Actual chlorine
concentration in the water should be used to calculate the necessary dose of calcium
thiosulfate.
|
||
|
Citric Acid[2] [3] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 15% Solution FCC | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% FCC | Membrane Cleaner | NA |
| Citric Acid 50% FG | Membrane Cleaner | NA |
| Citric Acid 50% Technical | Membrane Cleaner | NA |
[2] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Copper Sulfate[4] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[4] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride Liquid 38-42% | Coagulation & Flocculation | 250mg/L |
|
Fluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 23% | Fluoridation | 5mg/L |
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 25% | Oxidant Dechlorination |
3.8mg/L |
| Hydrogen Peroxide 8% | Oxidant Dechlorination |
13mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Miscellaneous Chemical Products[4] |
||
| Trade Designation | Product Function | Max Use |
| AgriHawk HOCI+ FSN | pH Adjustment Scale Control |
200mg/L |
[4] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Miscellaneous Treatment Applications[CP] |
||
| Trade Designation | Product Function | Max Use |
| Earth tec | Algicide Bactericide Molluscicide |
19mg/L |
| EarthTec | Algicide Bactericide Molluscicide |
19mg/L |
| EarthTec® | Algicide Bactericide Molluscicide |
19mg/L |
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ADC-9611 | Coagulation & Flocculation | 250mg/L |
| ADC-9612 | Coagulation & Flocculation | 175mg/L |
| Aluminum Chlorohydrate | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15077 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 15157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 607 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 657 | Coagulation & Flocculation | 175mg/L |
| EC-309 | Coagulation & Flocculation | 175mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| EC-461 | Coagulation & Flocculation | 32mg/L |
| EC-473 | Coagulation & Flocculation | 100mg/L |
| EC-475 | Coagulation & Flocculation | 185mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sodium Bisulfite[5] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 10% | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite (SBS) 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite (SBS) 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite (SBS) 40% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 10% Solution | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite 38% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 40% | Antioxidant Dechlorination |
46mg/L |
[5] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% Membrane | pH Adjustment | 200mg/L |
| Sodium Hydroxide 40% Membrane | pH Adjustment | 100mg/L |
| Sodium Hydroxide 50% Membrane | pH Adjustment | 100mg/L |
| Sodium Hydroxide, 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide, 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Bleach 8.4% | Disinfection & Oxidation | 59mg/L |
| Sodium Hypochlorite 5% | Disinfection & Oxidation | 95mg/L |
| Sodium Hypochlorite 6% | Disinfection & Oxidation | 81mg/L |
| Sodium Hypochlorite 7.5% | Disinfection & Oxidation | 66mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate[PO] |
||
| Trade Designation | Product Function | Max Use |
| CARUSOL®-20 | Disinfection & Oxidation | 176mg/L |
| Sodium Permanganate, 20% | Disinfection & Oxidation | 176mg/L |
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 38-40% | Corrosion & Scale Control | 116mg/L |
| Sulfuric Acid 40% | Corrosion & Scale Control | 116mg/L |
| Sulfuric Acid 50% | Corrosion & Scale Control | 91mg/L |
| Sulfuric Acid 50% W/W | Corrosion & Scale Control | 91mg/L |
| Sulfuric Acid 66' | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Burner Grade | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Low Hg | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 66' Smelter Grade | Corrosion & Scale Control | 50mg/L |
| Sulfuric Acid 78% | Corrosion & Scale Control | 59mg/L |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| LPC-9 | Corrosion & Scale Control | 13mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Memphis, TN
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda, Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 10 | Disinfection & Oxidation | 50mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| KC-615 | Disinfection & Oxidation | 40mg/L |
| KC-617 | Disinfection & Oxidation | 40mg/L |
| Sanygen | Disinfection & Oxidation | 74mg/L |
| Sanygen Industrial Chlor | Disinfection & Oxidation | 74mg/L |
| Sodium Hypo. 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 20% | Disinfection & Oxidation | 34mg/L |
| Sodium Hypochlorite 5.25% | Disinfection & Oxidation | 95mg/L |
| Vertex CSS-10 | Disinfection & Oxidation | 50mg/L |
| Vertex CSS-10 (R) | Disinfection & Oxidation | 50mg/L |
| Vertex CSS-12 | Disinfection & Oxidation | 40mg/L |
| Vertex CSS-16 | Disinfection & Oxidation | 34mg/L |
| Vertex CSS-5 | Disinfection & Oxidation | 95mg/L |
| Vertex Concentrate 10% | Disinfection & Oxidation | 50mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Lufkin, TX
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| NAPCO Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Disinfection & Oxidation | 60mg/L |
|
Copper Sulfate[1] [CP] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[1] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate |
||
| Trade Designation | Product Function | Max Use |
| CARUSOL®-20 | Disinfection & Oxidation | 176mg/L |
| Sodium Permanganate, 20% | Disinfection & Oxidation | 176mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Luling, TX
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Disinfection & Oxidation | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 204 | Corrosion & Scale Control | 33mg/L |
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 15% Solution FCC | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% FCC | Membrane Cleaner | NA |
| Citric Acid 50% FG | Membrane Cleaner | NA |
| Citric Acid 50% Technical | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Copper Sulfate[4] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[4] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 15% | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 15% FCC | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 15% Kosher | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 20% | pH Adjustment Corrosion & Scale Control |
70mg/L |
| Hydrochloric Acid 20' | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 20' FCC | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 20' Tech | pH Adjustment Corrosion & Scale Control |
44mg/L |
| Hydrochloric Acid 22' | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' FCC | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' PC Grade | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 22' Tech | pH Adjustment Corrosion & Scale Control |
40mg/L |
| Hydrochloric Acid 25% Solution | pH Adjustment Corrosion & Scale Control |
54mg/L |
| Hydrochloric Acid 9% | pH Adjustment Corrosion & Scale Control |
155mg/L |
| Hydrochloric Acid, 25% | pH Adjustment Corrosion & Scale Control |
54mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 10% | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite (SBS) 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite (SBS) 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite (SBS) 40% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 10% Solution | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite 38% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 40% | Antioxidant Dechlorination |
46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate[3] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Oxidant | 176mg/L |
| Sodium Permanganate 20% | Oxidant | 176mg/L |
| Sodium Permanganate 40% | Oxidant | 88mg/L |
[3] The finished drinking water should be monitored to ensure that levels of manganese do
not exceed 0.05 mg/L.
|
||
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Spring, TX
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
| NAPCO Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Disinfection & Oxidation | 60mg/L |
| NAPCO LAS | Chloramination | 40mg/L |
|
Blended Coagulation Chemicals[1] [AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® 6027 | Coagulation & Flocculation | 256mg/L |
[1] This product contains copper and may increase the amount of copper present in the
finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Corrosion Inhibitor |
||
| Trade Designation | Product Function | Max Use |
| Napco 214 | Corrosion & Scale Control | 40mg/L |
| Napco 214D | Corrosion & Scale Control | 80mg/L |
| Napco 215 | Corrosion & Scale Control | 28mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 300 | Corrosion Control Sequestering |
40mg/L |
| NAPCO 6200[PY] | Corrosion & Scale Control | 27mg/L |
| Napco 204 | Corrosion & Scale Control | 33mg/L |
| Napco 204D | Corrosion & Scale Control | 66mg/L |
| Napco 218 | Corrosion & Scale Control | 50mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Citric Acid[2] [3] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid 50% Technical | Membrane Cleaner | NA |
| NAPCO Citric Acid | Membrane Cleaner | NA |
[2] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Copper Sulfate[5] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate | Algicide Bactericide |
8mg/L |
[5] The use of copper sulfate as an algicide may increase the amount of copper present in
the finished drinking water. Following use of this product, the finished drinking water
should be monitored to ensure that levels of copper do not exceed regulatory
requirements.
|
||
|
Dipotassium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 310 | Corrosion Control | 27mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solutions | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 4507 | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% FCC | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 15% Kosher | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 20' | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' FCC | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 20' Tech | Corrosion & Scale Control pH Adjustment |
44mg/L |
| Hydrochloric Acid 22' | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' FCC | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' PC Grade | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 22' Tech | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 25% Solution | Corrosion & Scale Control pH Adjustment |
54mg/L |
| Hydrochloric Acid 9% | Corrosion & Scale Control pH Adjustment |
155mg/L |
| Hydrochloric Acid, 25% | Corrosion & Scale Control pH Adjustment |
54mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| HFS 23% | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
|
Miscellaneous Corrosion Chemicals |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 206 | Corrosion Control | 23mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% Tech Grade | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control | 13mg/L |
|
Sodium Bisulfite[4] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 10% | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite (SBS) 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite (SBS) 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite (SBS) 40% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 10% Solution | Antioxidant Dechlorination |
160mg/L |
| Sodium Bisulfite 15% | Antioxidant Dechlorination |
112mg/L |
| Sodium Bisulfite 25% | Antioxidant Dechlorination |
69mg/L |
| Sodium Bisulfite 38% | Antioxidant Dechlorination |
46mg/L |
| Sodium Bisulfite 40% | Antioxidant Dechlorination |
46mg/L |
[4] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 25% Caustic | pH Adjustment | 100mg/L |
| NAPCO 50% Caustic | pH Adjustment | 100mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 202 | Corrosion & Scale Control | 25mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| NAPCO 201 | Corrosion & Scale Control Sequestering |
39mg/L |
| NAPCO 201C | Corrosion & Scale Control Sequestering |
28mg/L |
| NAPCO 201D | Corrosion & Scale Control Sequestering |
72mg/L |
| NAPCO 211 LM | Corrosion & Scale Control Sequestering |
39mg/L |
| NAPCO 211 LM-C | Corrosion & Scale Control Sequestering |
28mg/L |
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Distribution Center - Fond Du Lac, WI
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 40% | Dechlorinator & Antioxidant | 46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565 | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38% | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48 mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Silicate | Corrosion & Scale Control | 42mg/L |
| Sodium Silicate SS5 | Corrosion & Scale Control | 42mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Superior, WI
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate Liquid | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Liquid Acidic | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate | Disinfection & Oxidation | 25mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 35% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Dry Wt | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Sol Wet Wgt. | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Hydrex 1565[1] | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25%[1] | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30%[1] | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 38%[1] | Corrosion & Scale Control pH Adjustment |
130mg/L |
| Sodium Hydroxide 46% | pH Adjustment Corrosion & Scale Control |
108mg/L |
| Sodium Hydroxide 50%[1] | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% FG[1] | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Certified for diaphragm and membrane grades. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone | Disinfection & Oxidation | 48mg/L |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 48mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 15% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
| Hawkins, Inc. | |
| 3100 East Hennepin Avenue | |
| Minneapolis, MN 55413 | |
| United States | |
| 612-331-6910 |
Facility : # 12 USA
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 347 | Disinfection & Oxidation | 40mg/L |
| Liquid Ammonium Sulfate | Disinfection & Oxidation | 40mg/L |
|
Copper Sulfate[CP] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk Cu | Algicide | 16mg/L |
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
|
||
| Hawkins, Inc. | |
| 3100 East Hennepin Avenue | |
| Minneapolis, MN 55413 | |
| United States | |
| 612-331-6910 |
Facility : # 3 USA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 1100 | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 6107 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 6137 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 61807 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 61827 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 6707 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 67167 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 6787 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 61347 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 61387 | Coagulation & Flocculation | 125mg/L |
| Aqua Hawk 6147 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 6157 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 61847 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 61857 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 67017 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 67817 | Coagulation & Flocculation | 100mg/L |
| Aqua Hawk 67847 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 67857 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 69317 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
| Hawkins, Inc. | |
| 3100 East Hennepin Avenue | |
| Minneapolis, MN 55413 | |
| United States | |
| 612-331-6910 |
Facility : # 15 USA
|
Ammonia, Anhydrous |
||
| Trade Designation | Product Function | Max Use |
| Ammonia | Chloramination | 5mg/L |
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide | Chloramination | 10mg/L |
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 6mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 38% Solution | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda-Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide-Liquid (Diaphragm Cell) | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide-Liquid (Membrane Cell) | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquid Bleach | Disinfection & Oxidation | 84mg/L |
| Sodium Hyopchlorite | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid | Corrosion & Scale Control | 50mg/L |
| Hawkins, Inc. | |
| 3100 East Hennepin Avenue | |
| Minneapolis, MN 55413 | |
| United States | |
| 612-331-6910 |
Facility : # 19 USA
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 657 | Coagulation & Flocculation | 250mg/L |
| Aqua Hawk 697 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 457[AL] | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 |
Facility : # 1 USA
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aquahawk 607 | Coagulation & Flocculation | 250mg/L |
| Aquahawk 687 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 | |
| Visit this company's website |
Facility : # 21 USA
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk 657 | Coagulation & Flocculation | 175mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 | |
| Visit this company's website |
Facility : # 22 USA
|
Blended Coagulation Chemicals[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aqua Hawk® ChitoFloc-H | Coagulation & Flocculation | 1000mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 | |
| Visit this company's website |
Facility : # 23 USA
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Azone 15 | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
| Hawkins, Inc. | |
| 2381 Rosegate | |
| Roseville, MN 55113 | |
| United States | |
| 612-331-6910 | |
| Visit this company's website |
Facility : # 24 USA
|
Aluminum Sulfate[1] [AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate | Coagulation & Flocculation | 400mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate[1] |
||
| Trade Designation | Product Function | Max Use |
| AS 4000 40% | Disinfection & Oxidation | 10mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
|
||
|
Ferric Sulfate[1] |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 12% Iron | Coagulation & Flocculation | 600mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
|
||
|
Fluorosilicic Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Fluorosilicic Acid 23% | Fluoridation | 5mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
|
||
|
Phosphoric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% | Corrosion & Scale Control pH Adjustment |
12mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
|
||
|
Sodium Bisulfite[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite (SBS) 40% | Dechlorinator & Antioxidant | 46mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
This product functions as a in situ filter media cleaner.
|
||
|
Sodium Hydroxide[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
166mg/L |
| Sodium Hydroxide 40% | Corrosion & Scale Control pH Adjustment |
125mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
|
||
|
Sodium Permanganate[1] [PO] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 20% | Disinfection & Oxidation | 176mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
|
||
Facility : # 25 USA
|
Ferric Chloride[1] |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 38% Solution | Coagulation & Flocculation | 250mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
|
||
Number of matching Manufacturers is 16
Number of matching Products is 1665
Processing time was 2 seconds
