NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, April 20, 2019 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=roberts+chemical&


NSF/ANSI 60
Drinking Water Treatment Chemicals - Health Effects



 
Roberts Chemical Co., Inc. 
330-B Victor Road
Attleboro, MA 02703-6202 
United States 
508-409-0220

Facility : Attleboro, MA


Hydrogen Peroxide [HP]
Trade Designation Product Function Max Use
Oxy Natural 34[1] Oxidant 3mg/L
Oxy Natural 35[2] Oxidant 3mg/L
Oxy Natural 50[3] Oxidant 2.1mg/L
Oxy Natural 7[4] Oxidant 15mg/L

[1] This product may be used for the treatment of sulfide and organic contaminants with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 88 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[2] This product may be used for the treatment of sulfide and organic contaminants with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 85 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[3] This product may be used for the treatment of sulfide and organic contaminants, with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 60 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[4] This product may be used for the treatment of sulfide and organic contaminants, with or
    without ozone or ultra-violet (UV) light, at a maximum use level of 428 mg/L. Treatment
    must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
    proposed maximum residual level.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Sodium Hypochlorite[CL]
Trade Designation Product Function Max Use
ROBCHLOR 15 Disinfection & Oxidation 84mg/L

[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.


Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds