NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, April 18, 2015 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=03620&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Aqua-Flo LSP Products Group 
3689 Arrowhead Drive
Carson City, NV 89706 
United States 
775-884-4242
Visit this company's website

Facility : Carson City, NV

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors[G]
KFC-516-PP      
KFC-520-PP      
N025xx-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
N031xx-**-! (Inner Diameter - 0.31 inches)[1] [3] [5]      
P025XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
P025XX-**-! (Inner Diameter - 0.25 inches)[1] [23] [24]      
P025XX-J2Z17[5] [17] [23]      
P025XX-Y10Y11[5] [6] [23]      
P025XX-Z3Z9[5] [11] [23]      
P025XX-Z9Z12[5] [8] [23]      
P026XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
P026XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
P026XX-U4U4[5] [10] [23]      
P026XX-Y1Y8[1] [5] [15]      
P028XX-** (Inner Diameter – 0.28 inches)[28]      
P028XX-**-! (Inner Diameter – 0.28 inches)[5] [23] [25]      
P028XX-I2U9[5] [8] [23]      
P028XX-J2Z12[5] [13] [23]      
P028XX-Y10Y11[5] [6] [23]      
P028XX-Y9Y10[5] [6] [23]      
P028XX-Z34Z35[5] [14] [23]      
P031XX-**-! (Inner Diameter – 0.31 inches)[1] [3] [5]      
P031XX-**-! (Inner Diameter – 0.31 inches)[5] [23] [26]      
P031XX-I1Y6[5] [20] [23]      
P031XX-J2Y1[1] [5] [19]      
P031XX-J2Z31[5] [22] [23]      
P031XX-J2Z31-HPB[5] [13] [23]      
P031XX-Y1Y2[1] [5] [20]      
P031XX-Y1Y3[1] [5] [20]      
U021XX-**-! (Inner Diameter - 0.21 inches)[1] [4] [5]      
U021XX-**-! (Inner Diameter - 0.21 inches)[5] [23] [27]      
U021XX-J2Z15[1] [5] [20]      
U025XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
U025XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
U025XX-J2Y7[1] [5] [17]      
U025XX-J2Z12[5] [16] [23]      
U025XX-M4Y7[1] [5] [18]      
U025XX-U4Z13[1] [5] [19]      
U025XX-Y7Z9[1] [5] [9]      
U025XX-Z7Z9[5] [8] [23]      
U025XX-Z9Z12[5] [8] [23]      
U025XX-Z9Z18[5] [17] [23]      
U026XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
U026XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
U031XX-**-! (Inner Diameter - 0.31 inches)[1] [3] [5]      
U031XX-**-! (Inner Diameter - 0.31 inches)[5] [23] [26]      
U031XX-A2A2[1] [5] [10]      
U031XX-A4A4[1] [5] [11]      
U031XX-A4H1[1] [5] [13]      
U031XX-H0K2[1] [5] [14]      
U031XX-H0M4[1] [5] [14]      
U031XX-H4U4[5] [21] [23]      
U031XX-J2J2[5] [15] [23]      
U031XX-K2N1[5] [14] [23]      
U031XX-M4M4[5] [14] [23]      
U031XX-U4Z2[1] [5] [12]      
U031XX-U4Z5[1] [5] [13]      
U031XX-U5U5[5] [11] [23]      
U031XX-Y3Y5[5] [21] [23]      
U031XX-Z9Z12[5] [7] [23]      
U038XX-A5A5[1] [5] [13]      
U050XX-A4A4[1] [5] [17]      
U050XX-A4H4[1] [5] [20]      
V025XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
V025XX-J1J1[5] [10] [23]      
V031XX-**-! (Inner Diameter - 0.31 inches)[5] [23] [26]      
V031XX-A10Y12[5] [6] [23]      

[1] These connectors contain one or more plated ends. 
    XX in the trade name indicates length and any connector is acceptable to a maximum of 63
    inches in length or higher based on the inner diameter. 
    For specific connector diameters maximum length restrictions are as follows: 
    0.21 in diameter maximum tubing length - 227 in 
    0.25 in diameter maximum tubing length - 190 in
    0.28 in diameter maximum tubing length - 170 in
    0.31 in diameter maximum tubing length - 154 in 
    0.38 in diameter maximum tubing length - 125 in
    0.50 in diameter maximum tubing length - 95 in 
    0.75 in diameter maximum tubing length - 63 in
[2] Connector End fitting (any two low-lead fittings used in combination): I1, J2, K6, Y8,
    Y15, Z19
[3] Connector End fitting (any two low-lead fittings used in combination): Z12, Z31
[4] Connector End fitting (any two low-lead fittings used in combination): Z15
[5] ! – LL (Contains Fittings with <0.25% Pb)
[6] Minimum Hose Length: 4 inches
[7] Minimum Hose Length: 8 inches
[8] Minimum Hose Length: 10 inches
[9] Minimum Hose Length: 12 inches
[10] Minimum Hose Length: 14 inches
[11] Minimum Hose Length: 15 inches
[12] Minimum Hose Length: 16 inches
[13] Minimum Hose Length: 18 inches
[14] Minimum Hose Length: 20 inches
[15] Minimum Hose Length: 22 inches
[16] Minimum Hose Length: 23 inches
[17] Minimum Hose Length: 24 inches
[18] Minimum Hose Length: 26 inches
[19] Minimum Hose Length: 28 inches
[20] Minimum Hose Length: 30 inches
[21] Minimum Hose Length: 32 inches
[22] Minimum Hose Length: 35 inches
[23] XX in the trade name indicates length; model V025XX-J1J1 is acceptable to a maximum of
     165 inches in length. All other connectors beginning with P, U or V are acceptable to a
     maximum of 154 inches in length or higher based on the inner diameter. 
     For specific diameters of connectors beginning with P, U or V maximum length
     restrictions are as follows: 
     0.21 in diameter maximum tubing length - 227 in 
     0.25 in diameter maximum tubing length - 190 in 
     0.28 in diameter maximum tubing length - 170 in 
     0.31 in diameter maximum tubing length - 154 in
     Optional suffix: - S (Screen)
[24] Connector End fitting (any two of each or any two in combination): A4, A9, E5, I1 J2,
     K5, K6, U4, U6, Y8, Y15, Z3, Z7, Z9, Z12, Z17, Z19, Z20, Z25, Z29, Z30
[25] Connector End fitting (any two of each or any two in combination): Y9, Y10, Y11
[26] Connector End fitting (any two of each or any two in combination): A10, Y2, Y12, Z12,
     Z28, Z31
[27] Connector End fitting (any two of each or any two in combination): K5, Z10, Z15
[28] XX in the trade name indicates length. Certification includes connectors with a length
     of 20 to 170 inches and an inner diameter of 0.28 in.
     Connector End fitting (any two of each or any two in combination):
     [1] Z34, Z35, Z36, Z37 (Certification does not include o-rings, washers, or gaskets)

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Facility : Hainan, China

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors[G]
KFC-516-PP      
KFC-520-PP      
N025xx-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
N031xx-**-! (Inner Diameter - 0.31 inches)[1] [3] [5]      
P025XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
P025XX-**-! (Inner Diameter - 0.25 inches)[1] [23] [24]      
P025XX-J2Z17[5] [17] [23]      
P025XX-Y10Y11[5] [6] [23]      
P025XX-Z3Z9[5] [11] [23]      
P025XX-Z9Z12[5] [8] [23]      
P026XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
P026XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
P026XX-U4U4[5] [10] [23]      
P026XX-Y1Y8[1] [5] [15]      
P028XX-** (Inner Diameter – 0.28 inches)[28]      
P028XX-**-! (Inner Diameter – 0.28 inches)[5] [23] [25]      
P028XX-I2U9[5] [8] [23]      
P028XX-J2Z12[5] [13] [23]      
P028XX-Y10Y11[5] [6] [23]      
P028XX-Y9Y10[5] [6] [23]      
P028XX-Z34Z35[5] [14] [23]      
P031XX-**-! (Inner Diameter – 0.31 inches)[1] [3] [5]      
P031XX-**-! (Inner Diameter – 0.31 inches)[5] [23] [26]      
P031XX-I1Y6[5] [20] [23]      
P031XX-J2Y1[1] [5] [19]      
P031XX-J2Z31[5] [22] [23]      
P031XX-J2Z31-HPB[5] [13] [23]      
P031XX-Y1Y2[1] [5] [20]      
P031XX-Y1Y3[1] [5] [20]      
U021XX-**-! (Inner Diameter - 0.21 inches)[1] [4] [5]      
U021XX-**-! (Inner Diameter - 0.21 inches)[5] [23] [27]      
U021XX-J2Z15[1] [5] [20]      
U025XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
U025XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
U025XX-J2Y7[1] [5] [17]      
U025XX-J2Z12[5] [16] [23]      
U025XX-M4Y7[1] [5] [18]      
U025XX-U4Z13[1] [5] [19]      
U025XX-Y7Z9[1] [5] [9]      
U025XX-Z7Z9[5] [8] [23]      
U025XX-Z9Z12[5] [8] [23]      
U025XX-Z9Z18[5] [17] [23]      
U026XX-**-! (Inner Diameter - 0.25 inches)[1] [2] [5]      
U026XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
U031XX-**-! (Inner Diameter - 0.31 inches)[1] [3] [5]      
U031XX-**-! (Inner Diameter - 0.31 inches)[5] [23] [26]      
U031XX-A2A2[1] [5] [10]      
U031XX-A4A4[1] [5] [11]      
U031XX-A4H1[1] [5] [13]      
U031XX-H0K2[1] [5] [14]      
U031XX-H0M4[1] [5] [14]      
U031XX-H4U4[5] [21] [23]      
U031XX-J2J2[5] [15] [23]      
U031XX-K2N1[5] [14] [23]      
U031XX-M4M4[5] [14] [23]      
U031XX-U4Z2[1] [5] [12]      
U031XX-U4Z5[1] [5] [13]      
U031XX-U5U5[5] [11] [23]      
U031XX-Y3Y5[5] [21] [23]      
U031XX-Z9Z12[5] [7] [23]      
U038XX-A5A5[1] [5] [13]      
U050XX-A4A4[1] [5] [17]      
U050XX-A4H4[1] [5] [20]      
V025XX-**-! (Inner Diameter - 0.25 inches)[5] [23] [24]      
V025XX-J1J1[5] [10] [23]      
V031XX-**-! (Inner Diameter - 0.31 inches)[5] [23] [26]      
V031XX-A10Y12[5] [6] [23]      

[1] These connectors contain one or more plated ends. 
    XX in the trade name indicates length and any connector is acceptable to a maximum of 63
    inches in length or higher based on the inner diameter. 
    For specific connector diameters maximum length restrictions are as follows: 
    0.21 in diameter maximum tubing length - 227 in 
    0.25 in diameter maximum tubing length - 190 in
    0.28 in diameter maximum tubing length - 170 in
    0.31 in diameter maximum tubing length - 154 in 
    0.38 in diameter maximum tubing length - 125 in
    0.50 in diameter maximum tubing length - 95 in 
    0.75 in diameter maximum tubing length - 63 in
[2] Connector End fitting (any two low-lead fittings used in combination): I1, J2, K6, Y8,
    Y15, Z19
[3] Connector End fitting (any two low-lead fittings used in combination): Z12, Z31
[4] Connector End fitting (any two low-lead fittings used in combination): Z15
[5] ! – LL (Contains Fittings with <0.25% Pb)
[6] Minimum Hose Length: 4 inches
[7] Minimum Hose Length: 8 inches
[8] Minimum Hose Length: 10 inches
[9] Minimum Hose Length: 12 inches
[10] Minimum Hose Length: 14 inches
[11] Minimum Hose Length: 15 inches
[12] Minimum Hose Length: 16 inches
[13] Minimum Hose Length: 18 inches
[14] Minimum Hose Length: 20 inches
[15] Minimum Hose Length: 22 inches
[16] Minimum Hose Length: 23 inches
[17] Minimum Hose Length: 24 inches
[18] Minimum Hose Length: 26 inches
[19] Minimum Hose Length: 28 inches
[20] Minimum Hose Length: 30 inches
[21] Minimum Hose Length: 32 inches
[22] Minimum Hose Length: 35 inches
[23] XX in the trade name indicates length; model V025XX-J1J1 is acceptable to a maximum of
     165 inches in length. All other connectors beginning with P, U or V are acceptable to a
     maximum of 154 inches in length or higher based on the inner diameter. 
     For specific diameters of connectors beginning with P, U or V maximum length
     restrictions are as follows: 
     0.21 in diameter maximum tubing length - 227 in 
     0.25 in diameter maximum tubing length - 190 in 
     0.28 in diameter maximum tubing length - 170 in 
     0.31 in diameter maximum tubing length - 154 in
     Optional suffix: - S (Screen)
[24] Connector End fitting (any two of each or any two in combination): A4, A9, E5, I1 J2,
     K5, K6, U4, U6, Y8, Y15, Z3, Z7, Z9, Z12, Z17, Z19, Z20, Z25, Z29, Z30
[25] Connector End fitting (any two of each or any two in combination): Y9, Y10, Y11
[26] Connector End fitting (any two of each or any two in combination): A10, Y2, Y12, Z12,
     Z28, Z31
[27] Connector End fitting (any two of each or any two in combination): K5, Z10, Z15
[28] XX in the trade name indicates length. Certification includes connectors with a length
     of 20 to 170 inches and an inner diameter of 0.28 in.
     Connector End fitting (any two of each or any two in combination):
     [1] Z34, Z35, Z36, Z37 (Certification does not include o-rings, washers, or gaskets)

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 134
Processing time was 0 seconds