NSF Product and Service Listings

These NSF Official Listings are current as of Monday, April 23, 2018 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=05720&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Belzona Inc. 
2000 N.W. 88 Court
Miami, FL 33172 
United States 
305-594-4994
Visit this company's website


Facility : Miami Lakes, FL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Fittings
Belzona 5812DW[1] >= 4" CLD 23 EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.

Coatings - Pipe
Belzona 5812DW[1] >= 6" CLD 23 EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.

Coatings - Tank
Belzona 5812DW[1] >= 500 gal. CLD 23 EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.

Coatings - Valve
Belzona 5812DW[1] >= 4" CLD 23 EPOXY

[1] Colors: Blue, grey					
    Number of Coats: 1 - 2					
    Maximum Field Use Dry Film Thickness: 24 (18 mils per coat)
    Recoat Cure Time and Temperature: 3 hours at 72°F			
    Final Cure Time and Temperature: 48 hours at 72°F			
    Special Comments: Mix ratio part A:B is 3:1 by volume or 4.7:1 by weight. The cured
    coating should be washed with clean water and the washings discarded prior to service in
    potable water.


Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds