NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=06900&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Holcim (US) Inc. 
6211 North Ann Arbor Road
Dundee, MI 48131 
United States 
734-529-2411


Facility : Theodore, AL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [3] [G]
Blended Cement Type IL (XX)[2] [1] CLD 23 CMNT
Hydraulic Cement Type GU [1] CLD 23 CMNT
Portland Cement Type I [1] CLD 23 CMNT
Portland Cement Type II [1] CLD 23 CMNT
Portland Cement Type III [1] CLD 23 CMNT
Portland Cement Type V [1] CLD 23 CMNT 

[1] Certified for pipe and fittings 12" and greater.
[2] Blended Cement Type IL (XX): XX in trade name denotes the target percentage of limestone
    in the formulation.
[3] Portland Cement Type I,II,III,V,Hydraulic Cement Type GU and Blended Cement Type IL
    (XX): Trade name may
    include "MS" Moderate Sulfate or "HS" High Sulfate resistance designations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Chicago, IL

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [2] [G]
Grade 100 NewCem [1] CLD 23 CMNT
Grade 120 Ground Granulated Blast Furnace Slag [1] CLD 23 CMNT
NewCem [1] CLD 23 CMNT 

[1] Certified for pipes and fittings 4" and greater, tanks 200 gallons and greater.
[2] Certified for a level not to exceed 50% of cement by mass.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Baltimore, MD

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements[1] [G]
NewCem [2] CLD 23 CMNT 

[1] Certified for a level not to exceed 50% of cement by mass.
[2] Certified for pipes and fittings 4" and greater, tanks 200 gallons and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Hagerstown, MD

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements[1] [G]
Blended Cement Type IL (XX)[2] [3] CLD 23 CMNT
Portland Cement Type I [3] CLD 23 CMNT
Portland Cement Type I/II [3] CLD 23 CMNT
Portland Cement Type II [3] CLD 23 CMNT 

[1] Portland Cement Type I, II, I/II and Blended Cement Type IL (XX): Trade name may include
    "MS" Moderate Sulfate or "HS" High Sulfate resistance designations.
[2] Blended Cement Type IL (XX): XX in the trade name denotes the target percentage of
    limestone in the
    formulation.
[3] Certified for pipes 20" and greater, tanks 1000 gallons and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Alpena, MI

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [3] [G]
Blended Cement Type IL (XX)[2] [1] CLD 23 CMNT
Portland Cement Type I [1] CLD 23 CMNT
Portland Cement Type I/II [1] CLD 23 CMNT
Portland Cement Type II [1] CLD 23 CMNT 

[1] Certified for pipes 4" and greater, tanks 200 gallons and greater.
[2] Blended Cement Type IL (XX): XX in trade name denotes the target percentage of limestone
    in the formulation.
[3] Portland Cement Type I,I/II,II and Blended Cement Type IL (XX): Trade name may include
    "MS" Moderate Sulfate or "HS" High Sulfate resistance designations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Bloomsdale, MO

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [3] [G]
Blended Cement Type IL (XX)[2] [1] CLD 23 CMNT
Portland Cement Type I [1] CLD 23 CMNT
Portland Cement Type II [1] CLD 23 CMNT 

[1] Certified for tanks 200 gallons and larger, pipes 8" and larger, and fittings 4" and
    larger.
[2] Blended Cement Type IL (XX): XX in trade name denotes the target percentage of limestone
    in the formulation.
[3] Portland Cement Type I,II and Blended Cement Type IL (XX): Trade name may include "MS"
    Moderate
    Sulfate or "HS" High Sulfate resistance designations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Ravena, NY

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements[1] [G]
Portland Cement Type I [2] CLD 23 CMNT
Portland Cement Type I/II [2] CLD 23 CMNT
Portland Cement Type II [2] CLD 23 CMNT 

[1] All Portland cements produced at this facility are NSF Certified, whether or not they
    bear the NSF Mark.
[2] Certified for pipes 6" and greater,  tanks 200 gallons and greater.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Paulding, OH

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [G]
Blended Cement Type IL (XX)[2] [1] CLD 23 CMNT
Portland Cement Type I and III[3] [1] CLD 23 CMNT 

[1] Certified for pipes 24" and greater, tanks 700 gallons and greater.
[2] Blended Cement Type IL (XX): XX in the trade name denotes the target percentage of
    limestone in the
    formulation.
[3] Portland Cement Type I, III and Blended Cement Type IL(XX): Trade name may include "MS"
    Moderate
    Sulfate or "HS" High Sulfate resistance designations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Whitehall, PA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [3] [G]
Blended Cement Type IL (XX)[2] [1] CLD 23 CMNT
Portland Cement Type I [1] CLD 23 CMNT
Portland Cement Type IE [1] CLD 23 CMNT
Portland Cement Type II [1] CLD 23 CMNT
Portland Cement Type III [1] CLD 23 CMNT 

[1] Certified for pipes 24" and greater, tanks 600 gallons and greater.
[2] Blended Cement Type IL (XX): XX in trade name denotes the target percentage of limestone
    in the formulation.
[3] Portland Cement Type I,IE,II,III and Blended Cement Type IL (XX): Trade name may include
    "MS" Moderate Sulfate or "HS" High Sulfate resistance designations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.



Facility : Holly Hill, SC

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Cements [3] [G]
Blended Cement Type IL (XX)[2] [1] CLD 23 CMNT
Portland Cement Type I, II, III [1] CLD 23 CMNT 

[1] Certified for pipes 4" and greater, tanks 200 gallons and greater.
[2] Blended Cement Type IL (XX): XX in trade name denotes the target percentage of limestone
    in the formulation.
[3] Portland Cement Type I,II,III and Blended Cement Type IL (XX): Trade name may include
    "MS"
    Moderate Sulfate or "HS" High Sulfate resistance designations.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 1
Number of matching Products is 33
Processing time was 0 seconds