NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=07200&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Concrete Sealants, Inc. | |
| 9325 State Route 201 | |
| Tipp City, OH 45371 | |
| United States | |
| 800-332-7325 | |
| 937-845-8776 | |
| Visit this company's website |
Facility : Tipp City, OH
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Lubricants |
||||
| ConLube CS-2000 | >= 1/2" | D. HOT | LUB | |
|
Sealants |
||||
| CS-231 | >= 1/2" | D. HOT | MLTPL | |
| CS-231-47B | >= 1/2" | D. HOT | MLTPL | |
| CS-235 | >= 1/2" | D. HOT | MLTPL | |
| CS-238 | >= 1/2" | D. HOT | MLTPL | |
| CS-5000 | [1] | D. HOT | SLT | |
| Conclay Seal | >= 1/2" | D. HOT | MLTPL | |
| Conseal CS-665 | >= 1/2" | D. HOT | MLTPL | |
| SuperSwell 47B | >= 1/2" | D. HOT | MLTPL | |
| WAM101 | >= 1/2" | D. HOT | MLTPL | |
[1] Certified for a maximum SA/V of 0.25 sq. in./L in pipes and tanks. |
||||
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Concrete Admixtures |
||||
| ConBlock CDA[1] | [2] | CLD 23 | CMNT | |
| ConBlock CDA Red[1] | [2] | CLD 23 | CMNT | |
[1] Certified for a maximum use level of 40 oz/100 lbs cement. [2] Certified for use in tanks 200 gallons and greater and pipes and fittings 4" and greater. |
||||
|
Concrete Sealers |
||||
| ConBlock SH[3] | [4] | D. HOT | SLT | |
| ConSeal CS-85[5] | [6] | D. HOT | SLT | |
[3] Certified for a post-cure of 18 hours at ambient temperature. [4] Certified for use in tanks 5 gallons and greater. [5] Certified for a post-cure of 10 minutes at ambient temperature. [6] Certified for use as a primer for concrete sealants in tanks 5 gallons and greater. |
||||
|
Other |
||||
| Conwrap PW[7] | [8] | D. HOT | MLTPL | |
[7] Product version with polyethlene film and butyl rubber adhesive is not Certified. [8] Certified for a maximum surface area to volume ratio of 1.7 square inches/L. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds
