NSF Product and Service Listings

These NSF Official Listings are current as of Friday, February 12, 2016 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=08500&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Tyco Fire and Building Products 
1467 Elmwood Avenue
Cranston, RI 02910 
United States 
401-781-8220
Visit this company's website


Facility : # 1 USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings
Grinnell Figure 201 45° Cast Elbow[G] 1 1/4" - 12" CLD 23 GALV
Grinnell Figure 201LR 45° Long Radius Elbow[G] 14" - 16" CLD 23 GALV
Grinnell Figure 210 90° Cast Elbow[G] 1 1/4" - 12" CLD 23 GALV
Grinnell Figure 210LR 90° Long Radius Elbow[G] 14" - 16" CLD 23 GALV
Grinnell Figure 211 11 1/4° Elbow[G] 1 1/4" - 8" CLD 23 GALV
Grinnell Figure 212 22 1/2° Elbow[G] 1 1/4" - 8" CLD 23 GALV
Grinnell Figure 219 Tee[G] 1 1/4" - 16" CLD 23 GALV
Grinnell Figure 221 Reducing Tee[G] 2"x2"x1½" - 8"x8"x6" CLD 23 GALV
Grinnell Figure 250 Concentric Reducer[G] 1 ¼" x 1"-12" x 10" CLD 23 GALV
Grinnell Figure 251 Eccentric Reducer[G] 3" x 2" - 6" x 5" CLD 23 GALV
Grinnell Figure 260 End Cap[G] 1" - 12" CLD 23 GALV

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : # 1 Spain

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[1] [2] [3] [G]
G-Press 1/2" - 2 1/2" C. HOT MLTPL

[1] Configurations include:
    45° F-F Elbow
    1/2" (471050)
    3/4" (471075)
    1" (471100)
    1 1/4" (471120)
    1 1/2" (471150)
    2" (471200)
    45° M-F Elbow
    1/2" (470050)
    3/4" (470075)
    1" (470100)
    1 1/4" (470120)
    1 1/2" (4700150)
    2" (470200)
    90° F-F Elbow
    1/2" (468050)
    3/4" (468075)
    1" (468100)
    1 1/4" (468120)
    1 1/2" (468150)
    2" (468200)
    90° M-F Elbow
    1/2" (467050)
    3/4" (467075)
    1" (467100)
    1 1/4" (467120)
    1 1/2" (467150)
    2" (467200)
    Adapter
    1/2" x 3/4" (4790575)
    1/2" x 1" (4790510)
    3/4" x 3/4" (4797575)
    3/4" x 1" (4797510)
    1" x 1" (4791010)
    1 1/4" x 1" (4791210)
    1 1/4" x 1 1/4" (4791212)
    1 1/4" x 1 1/2" (4791215)
    1" x 1 1/2" (4791015)
    1 1/2" x 1 1/2" (4791515)
    1 1/2" x 2" (4791520)
    2" x 1 1/2" (4792015)
    2" x 2" (4792020)
    Equal tee
    1/2" (442050)
    3/4" (442075)
    1" (442100)
    1 1/4" (442120)
    1 1/2" (442150)
    2" (442200)
    F-F Coupling
    1/2" (407050)
    3/4" (407075)
    1" (407100)
    1 1/4" (407120)
    1 1/2" (407150)
    2" (407200)
    F-F Slip coupling
    1/2" (408050)
    3/4" (408075)
    1" (408100)
    1 1/4" (408120)
    1 1/2" (408150)
    2" (408200)
    F Tee threaded adapter
    1/2" x 1/2" (4780505)
    1/2" x 3/4" (4780575)
    3/4" x 1/2" (4787505)
    3/4" x 3/4" (4787575)
    3/4" x 1" (4787510)
    1" x 1/2" (4781015)
    1" x 3/4" (4781075)
    1" x 1-1/4" (4781012)
    1 1/4" x 1/4" (4781212)
    1 1/4" x 1/2" (4781205)
    1 1/4" x 3/4" (4781275)
    1 1/4" x 1" (4781210)
    1 1/2" x 1/2" (4781505)
    1 1/2" x 3/4" (4781575)
    1 1/2" x 1" (4781510)
    1 1/2" x 1 1/2" (4781515)
    2" x 1/2" (4782005)
    2" x 3/4" (4782075)
    2" x 1" (4782010)
    2" x 2" (4782020)
    Female Threaded Adapter: Press x FNPT
    1/2" x 1/2" (4790505)
    3/4" x 1/2" (4797505)
    1" x 1/2" (4791005)
    1" x 3/4" (4791075)
    1 1/2" x 1" (4791510)
    1 1/2" x 1 1/4" (4791512)
    2" x 1 1/4" (4792012)
    Flanges adapter
    1/2" (475050)
    3/4" (475075)
    1" (475100)
    1 1/4" (475120)
    1 1/2" (475150)
    2" (475200)
    Flange adapter van stone
    1/2" (466050)
    3/4" (466075)
    1" (466100)
    1 1/4" (466120)
    1 1/2" (466150)
    2" (466200)
    M-F Reducer
    3/4" x 1/2" (4747505)
    1" x 1/2" (4741005)
    1" x 3/4" (4741075)
    1 1/4" x 1/2" (4741205)
    1 1/4" x 3/4" (4741275)
    1 1/4" x 1" (4741210)
    1 1/2" x 1/2" (47415050)
    1 1/2" x 3/4" (4741575)
    1 1/2" x 1" (4741510)
    1 1/2" x 1 1/4" (4741512)
    2" x 1/2" (4742005)
    2" x 3/4" (4742075)
    2" x 1" (4742010)
    2" x 1 1/4" (4742012)
    2" x 1 1/2" (4742015)
    Male adapter
    1/2" x 1/2" (4760505)
    1/2" x 3/4" (4760575)
    1/2" x 1" (4760510)
    3/4" x 3/4" (4767575)
    3/4" x 1" (4767510)
    1" x 1" (4761010)
    1" x 1 1/2" (4761015)
    1 1/4" x 1"(4761210)
    1 1/4" x 1 1/4"(4761212)
    1 1/4" x 1 1/2"(4761215)
    1 1/2" x 1 1/2" (4761515)
    2" x 1 1/2" (4762015)
    2" x 2" (4762020)
    Plug
    1/2" (484050)
    3/4" (484075)
    1" (484100)
    1 1/4" (484120)
    1 1/2" (484150)
    2" (484200)
    Reducing tee
    1 1/4" x 3/4" x 1 1/4" (4731275)
    1 1/4" x 1" x 1 1/4" (4731210)
    3/4" x 1/2" x 3/4" (4737505)
    1" x 1/2" x 1" (4731005)
    1" x 3/4" x 1" (4731075)
    1 1/4" x 1/2" x 1 1/4" (4731205)
    1 1/2" x 1 1/4" x 1 1/2" (4731512)
    1 1/2" x 1/2" x 1 1/2" (4731505)
    1 1/2" x 3/4" x 1 1/2" (4731575)
    1 1/2" x 1" x 1 1/2" (4731510)
    2" x 1/2" x 2" (4732005)
    2" x 3/4" x 2" (4732075)
    2" x 1" x 2" (4732010)
    2" x 1 1/4" x 2" (4732012)
    2" x 1 1/2" x 2" (4732015)
    Tee: Press In x Press Out x FNPT Branch
    1" x 1" x 1" (4781010)
    Male Threaded Adapter: Press x MNPT
    3/4" x 1/2" (4767505)
    1" x 3/4" (4761075)
    1 1/2" x 3/4" (4761575)
    1 1/2" x 1" (4761510)
    Transition Nipple Grooved x Press
    3/4" x 4" (477075)
    1" x 4" (477100)
    1 1/4" (477120)
    1 1/2" x 4" (477150)
    2" x 4" (477200)
    Union
    1/2" (485050)
    3/4" (485075)
    1" (485100)
    1 1/4" (485120)
    1 1/2" (485150)
    2" (485200)
    Weld Adapter
    1/2" x 4" (461050)
    3/4" x 4" (461075)
    1" x 4" (461100)
    1 1/4" (466110)
    1 1/2" x 4" (461150)
[2] ISO 7R/7RP Threaded Part numbers
    Male Threaded Adapter: Press x MNPT (Fig. 476)
    1/2" - 1/2" (476T0505)
    1/2" - 3/4" (476T0575)
    1/2" - 1" (476T0510)
    3/4" - 1/2" (476T7505)
    3/4" - 3/4" (476T7575)
    3/4" - 1" (476T7510)
    3/4" - 1 1/4" (476T7512)
    1" - 3/4" (476T1075)
    1" - 1" (476T1010)
    1" - 1 1/4" (476T1012)
    1" - 1 1/2" (476T1015)
    1 1/2" - 3/4" (476T1575)
    1 1/2" - 1" (476T1510)
    1 1/2" - 1 1/4" (476T1512)
    1 1/2" - 1 1/2" (476T1515)
    2" - 1 1/2" (476T2015)
    2" - 2" (476T2020)
    Female Threaded Adapter: Press x FNPT (Fig. 479)
    1/2" - 1/2" (479T0505)
    1/2" - 3/4" (479T0575)
    1/2" - 1" (479T0510)
    3/4" - 1/2" (479T7505)
    3/4" - 3/4" (479T7575)
    3/4" - 1" (479T7510)
    3/4" - 1 1/4" (479T7512)
    1" - 1/2" (479T1005)
    1" - 3/4" (479T1075)
    1" - 1" (479T1010)
    1" - 1 1/4" (479T1012)
    1" - 1 1/2" (479T1015)
    1 1/2" - 1" (479T1510)
    1 1/2" - 1 1/4" (479T1512)
    1 1/2" - 1 1/2" (479T1515)
    1 1/2" - 2" (479T1520)
    2" - 1 1/4" (479T2012)
    2" - 1 1/2" (479T2015)
    2" - 2" (479T2020)
    F Tee Threaded Adapter (Fig. 478)
    1/2" - 1/2" (478T0505)
    1/2" - 3/4" (478T0575)
    3/4" - 1/2" (478T7505)
    3/4" - 3/4" (478T7575)
    3/4" - 1" (478T7510)
    1" - 1/2" (478T1005)
    1" - 3/4" (478T1075)
    1" - 1" (478T1010)
    1" - 1 1/4" (478T1012)
    1 1/2" - 1/2" (478T1505)
    1 1/2" - 3/4" (478T1575)
    1 1/2" - 1" (478T1510)
    1 1/2" - 1 1/2" (478T1515)
    2" - 1/2" (478T2005)
    2" - 3/4" (478T2075)
    2" - 1" (478T2010)
[3] Certification includes authorized EPDM and Nitrile (NBR) gaskets.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.


Facility : # 3 USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Grinnell Figure 601 45° Elbow 2" - 3 1/2", 5" - 8" C. HOT BRASS
Grinnell Figure 601 45° Elbow 2" - 8" C. HOT BRASS
Grinnell Figure 610 90° Elbow 2" - 3 1/2", 5" - 8" C. HOT BRASS
Grinnell Figure 610 90° Elbow 2" - 8" C. HOT BRASS
Grinnell Figure 618 Groove x Groove x Cup Tee 3/4" - 3 1/2" C. HOT BRASS
Grinnell Figure 618 Groove x Groove x Cup Tee 3/4" - 4" C. HOT BRASS
Grinnell Figure 619 Tee 2" - 3 1/2", 5" - 8" C. HOT BRASS
Grinnell Figure 619 Tee 2" - 8" C. HOT BRASS
Grinnell Figure 621 Reducing Tee 2" - 3 1/2", 5" - 8" C. HOT BRASS
Grinnell Figure 621 Reducing Tee 2" - 8" C. HOT BRASS
Grinnell Figure 650 Concentric Reducer 2" - 3 1/2", 5" - 8" C. HOT BRASS
Grinnell Figure 650 Concentric Reducer 2" - 8" C. HOT BRASS
Grinnell Figure 660 End Cap 2" - 3 1/2", 5" - 8" C. HOT BRASS
Grinnell Figure 660 End Cap 2" - 8" C. HOT BRASS

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : # 4 USA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Grinnell 450A Concentric Reducer 1" - 12" C. HOT SS
Grinnell 451A Eccentric Reducer 1" - 12" C. HOT SS
Grinnell Figure 401A 45° Elbow 1" - 12" C. HOT SS
Grinnell Figure 410A 90° Elbow 1" - 12" C. HOT SS
Grinnell Figure 419A Tee 1" - 12" C. HOT SS
Grinnell Figure 421A Reducing Tee 1" - 12" C. HOT SS
Grinnell Figure 441 Flange Adapter 1" - 12" C. HOT SS
Grinnell Figure 460A End Cap 1" - 12" C. HOT SS
Grinnell Figure 477A Transition Nipple Grooved 1" - 2" C. HOT SS

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Oakland, IA

Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings[G]
Grinnell Figure 301LR 45° Long Radius Elbow 1 1/4" - 24" CLD 23 GALV
Grinnell Figure 310LR 90° Long Radius Elbow 1 1/4" - 24" CLD 23 GALV
Grinnell Figure 311 11 1/4° Elbow 1 1/4" - 24" CLD 23 GALV
Grinnell Figure 312 22 1/2° Elbow 1 1/4" - 24" CLD 23 GALV
Grinnell Figure 314 45° Lateral 1 1/4" - 24" CLD 23 GALV
Grinnell Figure 319 Tee 1 1/4" - 24" CLD 23 GALV
Grinnell Figure 321 Reducing Tee 1½"x1½x1¼-24"x24x20 CLD 23 GALV
Grinnell Figure 325 45° Reducing Lateral 3"x3"x2"-24"x24"20" CLD 23 GALV
Grinnell Figure 350 Concentric Reducer 1¼" x 1" - 24" x 20" CLD 23 GALV
Grinnell Figure 351 Eccentric Reducer 1¼" x 1 - 24" x 20" CLD 23 GALV
Grinnell Figure 360 End Cap 1" - 24" CLD 23 GALV

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    



Facility : Pottstown, PA

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
RSV-1 Residential 1" Domestic Shut-Off Valve 1" CLD 23 MLTPL
RSV-1 Residential 2" Domestic Shut-Off Valve 2" CLD 23 MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 48
Processing time was 0 seconds