NSF Product and Service Listings
These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=09290&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| CHIMEI Corporation | |
| No. 398, Sec. 1 Zhongzheng Rd | |
| Rende Dist., Tainan City 717010 | |
| Taiwan | |
| 886 6 266 3000 |
Facility : Tainan Shien, Taiwan
Potable Water Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | End Use | Temp | Material | |
|
Potable Water Materials |
||||
| KIBISAN® PN-117H L150[1] [2] | A,F | CLD 23 | SAN | |
| KIBISAN® PN-117H L150 FG[1] [2] | A,F | CLD 23 | SAN | |
| POLYLAC® PA-747[2] [3] | A | CLD 23 | ABS | |
| POLYLAC® PA-757[2] [4] | A,F | CLD 23 | ABS | |
| POLYLAC® PA-757 A01[2] [4] | A,F | CLD 23 | ABS | |
| POLYLAC® PA-757F[2] [4] | A,F | CLD 23 | ABS | |
| Polylac® PA-717C[2] [4] | A,F | CLD 23 | ABS | |
| Polylac® PA-717C J01[2] [4] | A,F | CLD 23 | ABS | |
| Polylac® PA-727[2] [4] | A,F | CLD 23 | ABS | |
| Polylac® PA-758 | A | CLD 23 | ABS | |
[1] Certified for a maximum surface area to volume ratio of 80 sq. in./L.
[2] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[3] Certified for a maximum surface area to volume ratio of 50 sq. in./L.
[4] Certified for a maximum surface area to volume ratio of 15 sq. in./L.
|
||||
[5] Certified for a maximum surface area to volume ratio of 250 square inches/L.
Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds
