NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, August 28, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0B750&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
DMT Co., Ltd. 
143B 3L, Namdong Gongdan
#718-2, Gojan-Dong 
Namdong-gu, Incheon 405-821 
Republic of Korea 
82 32 812 7311

Facility : Incheon, Korea, Republic of

Mechanical Devices

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Valves[G]
ACHV 0404 1/4" x 1/4" D. HOT MLTPL
ACHV 0405 1/4" x 5/16" D. HOT MLTPL
ACHV 0505 5/16" x 5/16" D. HOT MLTPL
ACHV 0606 3/8" x 3/8" D. HOT MLTPL
ACHV 0606M 6 mm x 6 mm D. HOT MLTPL
ACHV 0707 1/2" x 1/2" D. HOT MLTPL
ACHV 0808M 8 mm x 8 mm D. HOT MLTPL
ACHV 1010M 10 mm x 10 mm D. HOT MLTPL
ACHV 1212M 12 mm x 12 mm D. HOT MLTPL
ADCHV 1515M 15 mm x 15 mm D. HOT MLTPL
AMCHV 0402W 1/4" x 1/8" D. HOT MLTPL

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Mechanical Plumbing Devices

Trade Designation      

Supply Stops[1] [G]
AHBC0807      
AHBC1007      
AHBC1009      
AHBC1507M      
AHBC2107M      
AHBC2109M      
AHBC2207M      
AHBC2209M      
AHFA0404      
AHFA0604M      
AHFA0606      
AHFA0607      
AHFA0706      
AHFA0707      
AHFA0806      
AHFA0807      
AHFA1006M      
AHFA1007M      
AHFA1206M      
AHFA1207M      
AHFA1506M      
AHFA1507M      
AHFA1606M      
AHFA1607M      
AHFAUC0607      
AHFAUC1007M      
AHMC0404      
AHMC0604M      
AHMC0606      
AHMC0707      
AHMC1006M      
AHMC1207M      
AHSV1515M      
AHSV2115M      
AHSV2215M      
AHUC0404      
AHUC0606      
AHUC0606M      
AHUC0707      
AHUC0806      
AHUC0807      
AHUC0808      
AHUC1010      
AHUC1010M      
AHUC1212M      
AHUC1510M      
AHUC1512M      
AHUC1515M      
AHUC1610M      
AHUC1616M      
AHUC16M06      
AHUC16M07      
AHUC16M08      
AHUC2222M      
AHUCS0606      
AHVEU0608      
AHVMCB1509M      
AHWM0809      
ATHC1515M      
ATWV080808      
ATWV121212M      
ATWV161616M      

[1] The M at the end or middle of the part number represents metric.  The A at the beginning
    of each part number represents acetal.  The A is followed by an abbreviation of the
    valve design.  Metric size (mm or mm x in) valves are black; British size (in) valves
    are white. 
    
    Valve design abbreviations: 
    HMC   - Hand valve male connector (NPTF threads) 
    HUC   - Hand valve union connector 
    HUCS  - Hand valve union connector, short handle 
    HFA   - Hand valve female adapter (NPTF threads) 
    HFAUC - Hand valve female adapter (union connector) 
    HVEU  - Hand valve elbow union 
    HWM   - Hand valve washing M/C 
    TWV   - Three-way valve 
    HBC   - Hand barb connector 
    HSV   - Hand valve stop connector 
    THC   - Throttle hand valve connector
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Fittings [G]
ABBC [XX][YY]M-B[3] [4] 12mmx10" - 16mmx10"[5] D. HOT MLTPL
ABBC [XX][YY][Z][1] [2] 5/8"x1/2"-7/8"x3/4" D. HOT MLTPL
ABFU [XX][YY][Z][1] [2] 1/4" x 3/4" D. HOT MLTPL
ABU [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
ABU [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
ACIBEU [XX][YY][Z][1] [2] 5/16" - 3/8" D. HOT MLTPL
ACIBUC [XX][YY][Z][1] [2] 5/16 - 3/8 in D. HOT MLTPL
ACIMCBT [XX][YY][Z][1] [2] 5/16" x 1/4" D. HOT MLTPL
ACIMCF [XX][YY][Z][1] [2] 5/16"x¼"-5/16"x3/8" D. HOT MLTPL
ACIMCW [XX][YY][Z][1] [2] 5/16"x9/16"-¿"x9/16" D. HOT MLTPL
ACR [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
ACR [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
AC[XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
AC[XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
ADA [XX][YY]M-B[3] [4] 15mmx3/4"-16mmx3/4" D. HOT MLTPL
ADA [XX][YY][Z][1] [2] 5/8" x 3/4" D. HOT MLTPL
ADEU [XX][YY][Z][1] [2] 3/8" D. HOT MLTPL
AEL [XX][YY]M-B[3] [4] 15mmx10"-28mmx22"[6] D. HOT MLTPL
AEL [XX][YY][Z][1] [2] 3/8"x5/16"-1/2"x3/8" D. HOT MLTPL
AEU [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
AEU [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
AFA [XX][YY]M-B[3] [4] 6mmx1/8" - 22mmx1" D. HOT MLTPL
AFA [XX][YY][Z][1] [2] 1/4"x1/8"-3/8"x1/4" D. HOT MLTPL
AFAU [XX][YY] C [Z][1] [2] ¼"x7/16" -3/8"x7/16" D. HOT MLTPL
AFAU [XX][YY]CM-B[3] [4] 6mmx7/16"-10mmx7/16" D. HOT MLTPL
AFAUF [XX][YY] C [Z][1] [2] ¼"x7/16"-3/8"x7/16" D. HOT MLTPL
AFAUF [XX][YY] V [Z][1] [2] 1/4"x7/16"-3/8"x5/8" D. HOT MLTPL
AFAUF [XX][YY]CM-B[3] [4] 6mmx7/16"-10mmx7/16" D. HOT MLTPL
AFAUF [XX][YY]VM-B[3] [4] 6mmx7/16"-10mmx7/16" D. HOT MLTPL
AFAUN [XX][YY] V [Z][1] [2] 3/8"x1/2"-1/2"x1/2" D. HOT MLTPL
AFAUN [XX][YY]VM-B[3] [4] 8mmx1/2"-12mmx1/2" D. HOT MLTPL
AFC [XX][YY][Z][1] [2] 1/4" D. HOT MLTPL
AFR [XX][YY][Z][1] [2] 5/16" x 1/4" D. HOT MLTPL
AFWC [XX][YY]M-B[3] [4] 22mm x 10mm D. HOT MLTPL
AHA [XX][YY]M-B[3] [4] 22mm x 1" D. HOT MLTPL
AHA [XX][YY][Z][1] [2] 7/8" x 1" D. HOT MLTPL
AKFA [XX][YY][Z][1] [2] 1/4"x1/2"-3/8"x1/2" D. HOT MLTPL
AMC [XX][YY]M-B[3] [4] 4mmx1/8"-12mmx1/2" D. HOT MLTPL
AMC [XX][YY][Z][1] [2] 5/32"x1/8"-1/2"x1/2" D. HOT MLTPL
AMCB [XX][YY]M-B[3] [4] 4mmx1/8"-12mmx1/2" D. HOT MLTPL
AMCB [XX][YY][Z][1] [2] 5/32"x1/8"-1/2"x1/2" D. HOT MLTPL
AMCBB [XX][YY][Z][1] [2] 3/8"x1/8"-3/8"x1/4" D. HOT MLTPL
AMCBT [XX][YY][Z][1] [2] 5/32"x1/8"-1/2"x1/2" D. HOT MLTPL
AMCF [XX][YY][Z][1] [2] 5/16"x5/16"-3/8"x½" D. HOT MLTPL
AMCW [XX][YY][Z][1] [2] ¼"x9/16"-3/8"x9/16" D. HOT MLTPL
AME [XX][YY]M-B[3] [4] 6mmx1/8"-12mmx1/2" D. HOT MLTPL
AME [XX][YY][Z][1] [2] 3/16"x1/8"-1/2"x1/2" D. HOT MLTPL
AMTU [XX][YY][Z][1] [2] 1/4" D. HOT MLTPL
AOC [XX][YY]M-B[3] [4] 10mmx6" - 12mmx8" D. HOT MLTPL
AOC [XX][YY][Z][1] [2] 3/8"x1/4"-1/2"x5/16" D. HOT MLTPL
APBBC [XX][YY][Z][1] [2] 1/4"x1/4"-3/8"x1/4" D. HOT MLTPL
APBEU [XX][YY]M-B[3] [4] 8mm - 10mm D. HOT MLTPL
APBEU [XX][YY][Z][1] [2] 5/16" - 3/8" D. HOT MLTPL
APBUC [XX][YY]M-B[3] [4] 8mm - 10mm D. HOT MLTPL
APBUC [XX][YY][Z][1] [2] 5/16" - 3/8" D. HOT MLTPL
APL [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
APL [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
APMCBT [XX][YY][Z][1] [2] 5/16" x 1/4" D. HOT MLTPL
APMCF [XX][YY]M-B[3] [4] 8mmx1/4" - 8mmx3/8" D. HOT MLTPL
APMCF [XX][YY][Z][1] [2] 5/16"x¼"-5/16"x3/8" D. HOT MLTPL
APMCW [XX][YY]M-B[3] [4] 8mmx9/16"-10mmx9/16" D. HOT MLTPL
APMCW [XX][YY][Z][1] [2] 5/16"x9/16"-¿"x9/16" D. HOT MLTPL
APSEU [XX][YY][Z][1] [2] 5/16" - 3/8" D. HOT MLTPL
APSFBU [XX][YY][Z][1] [2] 5/16" D. HOT MLTPL
APSUC [XX][YY]M-B[3] [4] 8mm - 10mm D. HOT MLTPL
APSUC [XX][YY][Z][1] [2] 5/16" - 3/8" D. HOT MLTPL
ARD [XX][YY]M-B[3] [4] 4mmx5" - 10mmx12" D. HOT MLTPL
ARD [XX][YY][Z][1] [2] 5/32"x1/4"-3/8"x1/2" D. HOT MLTPL
ASA [XX][YY]M-B[3] [4] 4mmx1/8" - 12mmx1/2" D. HOT MLTPL
ASA [XX][YY][Z][1] [2] 5/32"x1/8"-1/2"x1/2" D. HOT MLTPL
ASAB [XX][YY]M-B[3] [4] 4mmx1/8" - 10mmx1/4" D. HOT MLTPL
ASAB [XX][YY][Z][1] [2] 3/8"x1/4"-1/2"x1/2" D. HOT MLTPL
ASABT [XX][YY][Z][1] [2] 3/16"x1/8"-1/2"x1/2" D. HOT MLTPL
ASAW [XX][YY][Z][1] [2] 5/16"x9/16"-¿"x9/16" D. HOT MLTPL
ASEU [XX][YY]M-B[3] [4] 15"x1/2" - 16mmx3/4" D. HOT MLTPL
ASEU [XX][YY][Z][1] [2] 5/8"x1/4"-7/8"x3/4" D. HOT MLTPL
ASSA [XX][YY]M-B[3] [4] 15mm x 3/8" D. HOT MLTPL
ASUC [XX][YY]M-B[3] [4] 15mmx1/2"-22mmx3/4" D. HOT MLTPL
ASUC [XX][YY][Z][1] [2] 5/8"x1/2"-5/8"x3/4" D. HOT MLTPL
ASVA [XX][YY][Z][1] [2] ¼"x9/16"-3/8"x9/16" D. HOT MLTPL
ATBC [XX][YY]M-B[3] [4] 6mmx4" - 12mmx10"[7] D. HOT MLTPL
ATBC [XX][YY][Z][1] [2] 1/4"x3/16"-1/2"x1/2" D. HOT MLTPL
ATC [XX][YY]M-B[3] [4] 15mm - 28mm D. HOT MLTPL
ATEB [XX][YY][Z][1] [2] 1/4"x1/4"-4/8"x5/16" D. HOT MLTPL
ATES [XX][YY]M-B[3] [4] 6mm - 12mm D. HOT MLTPL
ATES [XX][YY][Z][1] [2] 1/4" - 7/8" D. HOT MLTPL
ATEU [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
ATEU [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
ATHWD [XX][YY]M-B[3] [4] 10mmx6" - 12mmx10" D. HOT MLTPL
ATHWD [XX][YY][Z][1] [2] 3/8"x1/4"-1/2"x3/8" D. HOT MLTPL
ATTU [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
ATU [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
ATU [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
ATWD [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
ATWD [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
AUB [XX][YY]M-B[3] [4] 6mm - 12mm D. HOT MLTPL
AUB [XX][YY][Z][1] [2] 1/4" - 1/2" D. HOT MLTPL
AUC [XX][YY]M-B[3] [4] 4mm - 12mm D. HOT MLTPL
AUC [XX][YY][Z][1] [2] 5/32" - 1/2" D. HOT MLTPL
BPEU [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL
BPUC [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL
PEU [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL
PFA [XX][YY]-W[10] 1/4"x1/8"x3/8"x1/4" D. HOT MLTPL
PFAU [XX][YY]-W[10] ¼"x7/16"x3/8"x7/16" D. HOT MLTPL
PMC [XX][YY]-W[10] 1/4"X1/8"X3/8"X3/8" C. HOT MLTPL
PME [XX][YY]-W[10] 1/4"x1/8"x3/8"x3/8" C. HOT MLTPL
PRD [XX][YY]-W[10] 1/4"x3/8"x3/8"x1/2" D. HOT MLTPL
PSA [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL
PTEU [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL
PTU [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL
PUC [XX][YY]-W[10] 1/4" - 1/2" D. HOT MLTPL

[1] [XX] represents the inlet diameter size in inches, where [XX] may be any of the
    following: 01 (5/32") , 03 (3/16"), 04 (1/4"), 05 (5/6"), 06 (3/8"), or 07 (1/2").
    For fittings without threads, [YY] represents the outlet diameter size in inches, where
    [YY] may be any of the following: 01 (5/32"), 03 (3/16"), 04 (1/4"), 05 (5/16"), 06
    (3/8"), 07 (1/2"), 08 (5/8"), 09 (3/4"), 10 (7/8"), or 11 (1").
    For fittings with threads, [YY] represents the threaded outlet size in inches, where
    [YY] may be any of the following: 01 (5/32"), 02 (1/8"), 03 (3/16"), 04 (1/4"), 05
    (5/16"), 06 (3/8"), 07 (1/2"), 08 (5/8") , 09 (3/4"), 10 (7/8"), 11 (1"), 7/16 (7/16"),
    or 9/16 (9/16").
    [Z] represents the color of the fitting body, where 'W' represents white and the absence
    of a letter represents gray.  'SW' represents a silicone o-ring with a white fitting
    body.
[2] Fitting configuration abbreviations:
    BBC    - Barb connector
    BFU    - Both female union, BSP thread
    BU     - Bulkhead union
    C      - Cap
    CIBEU  - Clean elbow union (both (double) o-ring)
    CIBUC  - Clean union connector (both (double) o-ring)
    CIMCBT - Clean male connector, BSPT thread
    CIMCF  - Clean male connector, threaded cap
    CIMCW  - Clean male connector, BSW thread
    CR     - Cross
    DA     - Drain adapter
    DEU    - Dispensing elbow union
    EL     - Enlarger
    EU     - Elbow union
    FA     - Femal adapter, NPTF-Standard type
    FAU    - Female adapter, UNS thread
    FAUF   - Female adapter, UNF thread
    FAUN   - Female adapter, UN thread
    FC     - Filter connector
    FR     - Fitting reducer
    HA     - Hub adapter
    KFA    - Kitchen faucet adapter
    MC     - Male connector
    MCB    - Male connector, BSP thread
    MCBB   - Male connector with Big O-ring
    MCBT   - Male connector, BSPT thread
    MCF    - Male connector, MFL thread (threaded cap)
    MCW    - Male connector, BSW thread
    ME     - Male elbow
    MTU    - Male tee union (NPTF thread)
    OC     - Offset connector
    PBBC   - Power barb connector
    PBEU   - Power elbow union (both (double) o-ring)
    PBUC   - Power union connector (both (dobule) o-ring)
    PL     - Plug
    PMCBT  - Power male connector, BSPT thread
    PMCF   - Power male connector, threaded cap
    PMCW   - Power male connector, BSW thread
    PSEU   - Power elbow union (single o-ring)
    PSFBU  - Power flow bend union (single o-ring)
    PSUC   - Power union connector (single o-ring)
    RD     - Reducer
    SA     - Stem adapter
    SAB    - Stem adapter, BSP thread
    SABT   - Stem adapter, BSPT thread
    SAW    - Stem adapter, BSW thread
    SEU    - Swivel elbow union
    SUC    - Swivel union connector
    SVA    - Stop valve adapter
    TBC    - Tube barb connector
    TEB    - Tube elbow barb connector
    TES    - Tube end stop
    TEU    - Tube elbow union
    THWD   - Three-way divider
    TTU    - Tee union (4 holes)
    TU     - Tee union (3 holes)
    TWD    - Two-way divider
    UB     - U-Bend
    UC     - Union connector
[3] [XX] represents the outer diameter of the inlet in mm, where XX may be 04 (4 mm) - 28
    (28 mm).
    [YY] represemts the outer diamter of outlet in mm for fittings without threads, where YY
    may be 04 (4 mm) - 28 (28 mm).
    [YY] represent the outer diameter of the threded outlet in inches for threaded fittings,
    where YY may be 02 (1/8"), 04 (1/4"), 06 (3/8"), 07 (1/2"), 08 (5/8"), 09 (3/4"), 11
    (1"), 7/16 (7/16"), or 9/16 (9/16").
[4] Fitting configuration abbreviations:
    BBC  - Barb connector
    BU   - Bulkhead union
    C    - Cap
    CR   - Cross
    DA   - Drain adapter
    EL   - Enlarger
    EU   - Elbow union
    FA   - Female adapter, NPTF standard type
    FAU  - Female adapter, UNS thread
    FAUF - Female adapter, UNF thread
    FAUN - Female adapter, UN thread
    FWC  - Four way connector
    HA   - Hub adapter
    MC   - Male connector
    MCB  - Male connector, BSP thread
    ME   - Male elbow
    OC   - Offset connector
    PBEU - Power elbow union (both (double) o-ring)
    PBUC - Power union connector (both (double) o-ring)
    PL   - Plug
    PMCF - Power male connector, threaded cap
    PMCW - Power male connector, BSW thread
    PSUC - Power union connector (single o-ring)
    RD   - Reducer
    SA   - Stem adapter
    SAB  - Stem adapter, BSP thread
    SEU  - Swivel elbow union
    SSA  - Stem-to-Stem adapter
    SUC  - Swivel union connector
    TBC  - Tube barb connector
    TC   - Tank connector
    TES  - Tube end stop
    THWD - Three-way divider
    TU   - Tee union
    TWD  - Two-way divider
    UB   - U-Bend
    UC   - Union connector
[5] 15 mm x 1/2" - 22 mm x 3/4"
[6] 15 mm x 1/2" - 18 mm x 1/2"
[7] 15 mm x 3/8" - 15 mm x 1/2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[10] [XX] represents the inlet diameter size in inches, where [XX] may be any of the
     following: 04 (1/4"), 05 (5/16"), 06 (3/8"), 07 (1/2"), 047 (1/4"), or 067 (3/8").
     For fittings without threads, [YY] represents the outlet diameter size in inches, where
     [YY] may be any of the following: 04 (1/4"), 05 (5/16"), 06 (3/8"), or 07 (1/2").
     For fittings with threads, [YY] represents the threaded outlet size in inches, where
     [YY] may be any of the following: 02 (1/8"), 03 (3/16"), 04 (1/4"), 05 (5/16"), 06
     (3/8"), 07 (1/2"), or 16C (7/16" - 24").

Tubing/Hose [G]
DPE-OD-CO-RL[8] 4 mm - 15 mm C. HOT PE
DPE-RT04[9] 1/4" C. HOT PE
DPE-RT05[9] 5/16" C. HOT PE
DPE-RT06[9] 3/8" C. HOT PE
DPE-RT07[9] 1/2" C. HOT PE

[8] DPE - Trade name
    OD - Outer diameter
         01 - 5/32"
         03 - 3/16"
         04 - 1/4"
         05 - 5/16"
         06 - 3/8"
         07 - 1/2"
         04M - 4mm
         06M - 6mm
         08M - 8mm
         10M - 10mm
         12M - 12mm
         15M - 15mm
    CO - Color
         BK  - Black
         BL  - Blue
         GN  - Green
         GR  - Gray     
         IBK - Black
         NA  - Natural
         OR  - Orange
         RE  - Red
         WT  - White
         YE  - Yellow
    RL - Reel length (meters)
         0100 - 100 m
         0150 - 150 m
         0200 - 200 m
         0300 - 300 m
         0400 - 400 m
         0500 - 500 m
         1000 - 1000 m
         1500 - 1500 m
    Certified for the maximum length for each diameter:
    Outer diameter:       Inner diameter:       Length:
    5/16"                 .187"                 7.8 m
    3/8"                  1/4"                  5.8 m
    1/2"                  3/8"                  3.9 m
    8mm                   6mm                   6.2 m
    10mm                  7mm                   5.3 m
    12mm                  9mm                   4.1 m
    15mm                  11.5mm                3.2 m
[9] Certified for blue or white tubing.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 189
Processing time was 1 seconds