NSF Product and Service Listings

These NSF Official Listings are current as of Monday, July 22, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0E110&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Crossfield Products Corp. 
3000 East Harcourt Street
Rancho Dominguez, CA 90221 
United States 
310-886-9100


Facility : Rancho Dominguez, CA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank[1]
Dex-O-Tex Cemceil Membrane >= 100 gal. CLD 23 CMNT
Miracote MiraFlex Membrane C >= 100 gal. CLD 23 CMNT 

[1] Colors: Natural, white
    Number of Coats: 1-3
    Maximum Field Use Dry Film Thickness(in mils): 78 mils
    Recoat Cure Time and Temperature: 2 hours at 70º F
    Final Cure Time and Temperature: 7 days at 70º F
    Special Comments: Mix ratio for A:B is 28:72 by weight and 52:48 by volume. Use 15
    minute induction time for vertical application. Use of Poly Fabric Reinforcement is
    recommended over cracks and 90 degree angles and is encapsulated within first coat.
    Apply tack coat of material before positioning fabric, thoroughly saturate and smooth
    any wrinkles from fabric, then apply coating to maximum dry film thickness.



Facility : Roselle Park, NJ

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Coatings - Tank[1]
MPC Liquid Catalyst >= 10,000 gal. CLD 23 CMNT
MPC Powder >= 10,000 gal. CLD 23 CMNT
Miracote Catalyst & Powder >= 10,000 gal. CLD 23 CMNT
Multipurpose Protective Coating (MPC): MPC Liquid Catalyst & MPC Powder >= 10,000 gal. CLD 23 CMNT
Multipurpose Protective Coating Liquid Catalyst >= 10,000 gal. CLD 23 CMNT
Multipurpose Protective Coating Powder >= 10,000 gal. CLD 23 CMNT
Resistite Liquid >= 10,000 gal. CLD 23 CMNT
Resistite Powder >= 10,000 gal. CLD 23 CMNT
Resistite Protective Coating: Resistite Liquid and Resistite Powder >= 10,000 gal. CLD 23 CMNT 

[1] Number of Coats: 2-3
    Maximum Field Use Dry Film Thickness (in mils): 60
    Recoat Cure Time and Temperature: 4 hours at 72°F
    Final Cure Time and Temperature: 24 hours at 72°F
    Special Comments: Mix ratio for A:B is 110:43 by weight for each coat

Number of matching Manufacturers is 1
Number of matching Products is 11
Processing time was 0 seconds