NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, November 15, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0E170&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Best Ring Industrial Corp. 
No. 92-8, Meizhou 2nd Road
Yilan City, Yilan County 260 
Taiwan 
886 3 928 7999
Visit this company's website


Facility : Yilan, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
E6088[1] [2] C. HOT EPDM
E7088[1] [2] C. HOT EPDM
E8088[1] [2] C. HOT EPDM
EEP0708 OP[3] [2] C. HOT EPDM
EP0E7001P-WRC[5] [6] C. HOT EPDM
EP6566[1] [2] C. HOT EPDM
N5066 [8] C. HOT NBR
N6088 [8] C. HOT NBR
N7088 [8] C. HOT NBR
N7588 [8] C. HOT NBR
N8088 [8] C. HOT NBR
S6001N[9] [10] C. HOT SLC
S7001N[9] [10] C. HOT SLC
S8001N[9] [10] C. HOT SLC
SIL40 +/-5 S4001[9] [10] C. HOT SLC 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.2 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 1 square inches/L.
[8] Certified for a maximum surface area to volume ratio of 1.6 sq. in./L.
[9] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.15 square inches/L.
[10] Certified for a maximum surface area to volume ratio of 1.5 square inches/L.

O-Rings
EEP0708 OP[3] [2] C. HOT EPDM 

[2] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.
[3] This product is also evaluated for use in Mechanical Plumbing Device applications with a
    maximum use restriction of 1.1 square inches/L.


[4] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L.
[7] This product shall also be evaluated for use in Mechanical Plumbing Device applications
    with a maximum surface area to volume ratio of 0.8 sq.

Mechanical Plumbing Devices

Trade Designation      

Gasket/Sealing Materials[1]
E7088[2]      
N6088[3]      
N7088[3]      
N7588[3]      
N8088[3]       

[2] Certified for a maximum surface area to volume ratio of 0.3 square inches per liter.
[3] Certified for a maximum surface area to volume ratio of 2.0 square inches per liter.


[1] This product does not require a Q statistic. It is made from material or materials that
    do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.

Number of matching Manufacturers is 1
Number of matching Products is 21
Processing time was 0 seconds