NSF Product and Service Listings

These NSF Official Listings are current as of Friday, September 19, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0M300&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Xiamen Runner Industrial Corporation 
No. 69, Tianfeng Road
North Industrial Zone 
Jimei, Xiamen 
China 
86 592 6151 888
Visit this company's website

Facility : Fujian, China

Mechanical Plumbing Devices

Trade Designation      

Faucet Hose and Spray Assembly[1]
322101 Brass Spray and Hose[2] [G]      
322111 Brass Spray and Hose[2] [G]      
3230(1)[G]      
3231(1)[G]      
3232(1)[G]      
3233(1)[G]      
3233(1)[G]      
3234(1)[G]      
3234(1)[G]      
3235(1)[G]      
3235(1)[G]      
3245(1)[G]      
3255(1)[G]      
3260(1)[G]      
3265(1)[G]      
338261[G]      
338701[G]      
38211[G]      

[2] Certified pull-out wand finishes are Chrome Plated (CP), Oil Rubbed Bronze (2BZ),
    Physical Vacuum Deposit (PVD), or Vibrant Stainless Steel (VS).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

[1] (1) May be:
        0 - Spray head with hose
        1 - Spray head only
        2 - Hose only
        3 - Spray head with hose and hose guide
    
        Suffix Instruction
        Spray head colors may be noted as follows:
        AL  - Almond
        BK  - Black
        BS  - Biscuit spray head
        CP  - Chrome plated
        IV  - Ivory
        PVD - Physical vacuum deposit
        SN  - Satin nickel
        WT  - White

Faucet Handspray Head Assembly
325101 Sidespray[3] [G]      
325201 Sidespray[G]      
359101 Pull-Out Wand[2] [G]      
359115 Pull-out Wand[G]      
359131 Pull Down[2] [G]      
359141 Pull-out wand[G]      
359151 Pull Down[2] [G]      
359155 Pull-out wand[G]      
359161 Pull Down[2] [G]      
359171 Pull-out wand[G]      
364101 Kitchen Pullout Wand[G]      
364111 Pull-Out[G]      
3642 (1176828) Pull-Out Wand[G]      
364301 Pull-out[3] [G]      
364601 Sidespray[G]      
367101 Pull Out Wand[G]      

[2] Certified pull-out wand finishes are Chrome Plated (CP), Oil Rubbed Bronze (2BZ),
    Physical Vacuum Deposit (PVD), or Vibrant Stainless Steel (VS).
[3] There are two optional finishes, CP and PVD, on the outer body, which does not contact
    water.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Faucet Pull-Out Hose Assembly
338281 Kitchen Spray Hose Assembly[4] [G]      
338282 Hose Assembly[5] [G]      
3486-011 (1147738) Pull Down Faucet[G]      
348602 (1115537) Hose Assembly[G]      
348901 Kitchen Spray Hose Assembly[4] [G]      
348911 Kitchen Spray Hose Assembly[4] [G]      

[4] Certified to a maximum length of 55 inches of 0.3 inch diameter tubing.
[5] Certified to a maximum length of 55 inches and an inner diameter of 0.39 inches.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Miscellaneous Faucet Components
3483-501 Spout Hose Assembly[G]      
3483-502 Spout Hose Assembly[G]      
3483-503 Spout Hose Assembly[G]      
3483-504 Spout Hose Assembly[G]      
3484-502 Spout Hose Assembly[G]      
3484-505 Spout Hose Assembly[G]      
3484-506 Spout Hose Assembly[G]      
3484-507 Spout Hose Assembly[G]      
3484-508 Spout Hose Assembly[G]      
3484-509 Spout Hose Sssembly[G]      
3484-512 Spout Hose Assembly[G]      
3484-513 Spout Hose Assembly[G]      
3591-106 Spray Face Assembly[G]      

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 53
Processing time was 0 seconds