NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, October 23, 2014 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0P150&Standard=061&



NSF/ANSI 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.


 
Watts Plumbing Technologies (Taizhou) Co., Ltd. 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-689-6249

Facility : # 1 Zhejiang, China

Mechanical Plumbing Devices

Trade Designation      

Flexible Plumbing Connectors[G]
LBLK CA16-66-CP      
LFM-(1)(2)[1]      
LFT-(1)(2)[1]      
TS-(1) WPE(2)(3)(4)(3)(4)-(5)[2]      
TS-(1)P(2)(3)(4)(3)(4)-(5)[3]      

[1] LFM  - Stainless steel braid
    LFT  - PVC inner braided reinforced
    (1) End fitting combination
        1/2" FIP X 1/2" FIP
        3/8" FCM X 1/2" FIP
        7/16" FCM X 1/2" FIP
        1/2" FCM X 1/2" FIP
        3/8" FCM X 3/8" FCM
        7/8" FBC X 1/2" FIP
        1/4" FCM X 1/2" FCM
        7/8" FBC X 3/8" FCM
        7/8" FBC x 7/16" FCM
        7/8" FBC x 1/2" FCM 
        1/2" FCM X 1/2" FCM
        3/4" FIP X 1/2" FIP
        3/4" FIP X 3/8" FCM
        3/8" FCM X 3/8" Copper
    (2) Length in inches - not to exceed 40" in length
    Evaluated to a maximum length of 40" of 0.315" diameter tubing
[2] PEX Faucet Connector
    (1) Hose category: 
        11 – F11 Aluminum braided hose 
        14 – F14 Stainless steel flexible hose 
        15 – F15 Stainless steel braid 
        22 – F22 Brass flexible hose 
        24 – F24 Nylon braided hose 
    WPE – Watts PEX inner tubing 
    (2) Tubing inside diameter 
        DN6 – 5.5 ~ 6.5mm 
        DN8 – 7.5 ~ 8.5mm 
    (3) End configuration 
        A - Male fittings used for taps 
        B - Female fittings 
    (4) Connection size 
        0  - M10x1 
        1  - M11x1 
        2  - 1/8"
        3  - M12x1 
        4  - 1/4"
        5  - M15x1 
        6  - 3/8"
        7  - 7/16"
        8  - 1/2"
        9  - M8x1 
        11 - 11/16"
        12 - 3/4"
        14 - 7/8"
    (5) Hose length in centimeters, not to exceed: 
        280cm for DN6 
        216cm for DN8
[3] (1) Reinforcement/Braid: 12, 13, 14, 15, 22, 24, 25, or B.
        P - PVC inner tubing
    (2) Tubing inside diameter: L, S, T, W, or Z.
    (3) End configuration: A, B, C, K, or F.
    (4) Connection size: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, or 14
    (5) Hose length in inches not to exceed:
        110" for (2) - T
         90" for (2) - W
         85" for (2) - S
         76" for (2) - Z
         61" for (2) - L

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Pipes and Related Products

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Flexible Plumbing Connectors [G]
121SS12[1] 3/4" x 1" D. HOT MLTPL
121SS12R[1] 3/4" x 1" D. HOT MLTPL
121SS15[1] 3/4" x 1" D. HOT MLTPL
121SS15R[1] 3/4" x 1" D. HOT MLTPL
121SS18[1] 3/4" x 1" D. HOT MLTPL
121SS18R[1] 3/4" x 1" D. HOT MLTPL
121SS24[1] 3/4" x 1" D. HOT MLTPL
121SS24R[1] 3/4" x 1" D. HOT MLTPL
1FFSS12[1] 1" x 1" D. HOT MLTPL
1FFSS12R[1] 1" x 1" D. HOT MLTPL
1FFSS15[1] 1" x 1" D. HOT MLTPL
1FFSS15R[1] 1" x 1" D. HOT MLTPL
1FFSS18[1] 1" x 1" D. HOT MLTPL
1FFSS18R[1] 1" x 1" D. HOT MLTPL
1FFSS24[1] 1" x 1" D. HOT MLTPL
1FFSS24R[1] 1" x 1" D. HOT MLTPL
BF-XX[2] 3/4" x 3/4" D. HOT MLTPL
BF-XXA[2] 3/4" x 5/8" D. HOT MLTPL
BF-XXA[2] 3/4" x 7/8" D. HOT MLTPL
BF-XXC[2] 3/4" x 7/8" D. HOT MLTPL
BF-XXC[2] 3/4" x 3/4" D. HOT MLTPL
BF-XXC[2] 3/4" x 3/4" D. HOT MLTPL
BF-XXC[2] 3/4" x 5/8" D. HOT MLTPL
BF-XXD[2] 3/4" x 3/4" D. HOT MLTPL
BF-XXE[2] 3/4" x 5/8" D. HOT MLTPL
BF-XXF[2] 1/2" x 5/8" D. HOT MLTPL
BF-XXG[2] 1/2" x 1/2" D. HOT MLTPL
CWH-S-AF x XX[2] 7/8" x 3/4" D. HOT MLTPL
CWH-S-AF-LXX[2] 5/8" x 3/4" D. HOT MLTPL
CWH-S-AF-LXX[2] 7/8" x 3/4" D. HOT MLTPL
CWH-S-AM x XX[2] 7/8" x 3/4" D. HOT MLTPL
CWH-S-AM-LXX[2] 7/8" x 3/4" D. HOT MLTPL
CWH-S-FF x XX[2] 3/4" x 3/4" D. HOT MLTPL
CWH-S-FF-LXX[2] 3/4" x 3/4" D. HOT MLTPL
CWH-S-FM-LXX[2] 3/4" x 3/4" D. HOT MLTPL
CWH-S-QF[2] ¾"CTS x ¾"FIP x 12" D. HOT MLTPL
CWH-S-QF[2] ¾"CTS x ¾"FIP x 24" D. HOT MLTPL
CWH-S-QF[2] ¾"CTS x ¾"FIP x 18" D. HOT MLTPL
CWS-S-QF[2] ¾"CTS x 1"FIP x 18" D. HOT MLTPL
CWS-S-QF[2] 1"CTS x 1"FIP x 24" D. HOT MLTPL
CWS-S-QF[2] 1"CTS x 1"FIP x 18" D. HOT MLTPL
CWS-S-QF[2] ¾"CTS x 1"FIP x 24" D. HOT MLTPL
Corrugated Stainless Steel Water Heater Connectors[1] 3/4" D. HOT MLTPL
FFSS12[1] 3/4" x 3/4" D. HOT MLTPL
FFSS12R[1] 3/4" x 3/4" D. HOT MLTPL
FFSS15[1] 3/4" x 3/4" D. HOT MLTPL
FFSS15R[1] 3/4" x 3/4" D. HOT MLTPL
FFSS18[1] 3/4" x 3/4" D. HOT MLTPL
FFSS18R[1] 3/4" x 3/4" D. HOT MLTPL
FFSS24[1] 3/4" x 3/4" D. HOT MLTPL
FFSS24R[1] 3/4" x 3/4" D. HOT MLTPL
FSSS12[1] 3/4" x 3/4" D. HOT MLTPL
FSSS12R[1] 3/4" x 3/4" D. HOT MLTPL
FSSS15[1] 3/4" x 3/4" D. HOT MLTPL
FSSS15R[1] 3/4" x 3/4" D. HOT MLTPL
FSSS18[1] 3/4" x 3/4" D. HOT MLTPL
FSSS18R[1] 3/4" x 3/4" D. HOT MLTPL
FSSS24[1] 3/4" x 3/4" D. HOT MLTPL
FSSS24R[1] 3/4" x 3/4" D. HOT MLTPL
HLF1x3/4 121SS24R[1] 3/4" x 1" D. HOT MLTPL
HLF3/4x1 121SS18[1] 3/4" x 1" D. HOT MLTPL
HLFBK BF-24[2] 1" x 1" D. HOT MLTPL
HLFBK LBF-15[2] 3/4" x 3/4" D. HOT MLTPL
HLFBK LBF-18[2] 3/4" x 3/4" D. HOT MLTPL
HLFBK LBF-18A[2] 3/4" x 7/8" D. HOT MLTPL
HLFBK LBF-18C[2] 3/4" x 3/4" D. HOT MLTPL
HLFBK LBF-18D[2] 225" x 7/8" D. HOT MLTPL
HLFBK LBF-24[2] 3/4" x 3/4" D. HOT MLTPL
HLFQCWS34 3/4CTSx1FIPx18[2] 3/4" CTSx1" FIPx18" D. HOT MLTPL
LBF-XX[2] 3/4" x 3/4" C. HOT MLTPL
LBF-XXA[2] 3/4" x 7/8" D. HOT MLTPL
LBF-XXAA[2] 3/4" D. HOT MLTPL
LBF-XXAA[2] 7/8" D. HOT MLTPL
LBF-XXB[2] 5/8" x 3/4" D. HOT MLTPL
LBF-XXC[2] 3/4" x 3/4" D. HOT MLTPL
LBF-XXD[2] 225" x 7/8" D. HOT MLTPL
LBF-XXE[2] 5/8" x 3/4" D. HOT MLTPL
LBF-XXGH[2] 3/4" x 3/4" D. HOT MLTPL
LBF-XXGH[2] 7/8" x 3/4" D. HOT MLTPL
LFBK BF-24[2] 1" x 1" D. HOT MLTPL
LFWHS(X)-YY[3] 3/4" x 3/4" D. HOT MLTPL
MLW0148003[1] 3/4" x 3/4" D. HOT MLTPL
MLW0148042[1] 3/4" x 3/4" D. HOT MLTPL
MLW0148044[1] 3/4" x 3/4" D. HOT MLTPL
MLW0148045[1] 3/4" x 3/4" D. HOT MLTPL
MLWO148002[1] 3/4" x 3/4" D. HOT MLTPL
Pro-Flo PFX210962[1] 3/4" x 3/4" D. HOT MLTPL
Pro-Flo PFX210963[1] 3/4" x 3/4" D. HOT MLTPL
QCWH[2] ¾"CTS x ¾"FIP x 18" D. HOT MLTPL
QCWHE[2] ¾"CTS x ¾"FIP x 18" D. HOT MLTPL
QCWHG[2] ¾"CTS x ¾"FIP x 18" D. HOT MLTPL
QCWS1[2] 1"CTS x 1"FIP x 18" D. HOT MLTPL
QCWS34[2] ¾"CTS x 1"FIP x 18" D. HOT MLTPL
WHS(X)-YY[3] 3/4" x 3/4" D. HOT MLTPL
WSK-24[2] 1"CTS x 1"FIP x 24" D. HOT MLTPL

[1] Connectors come in 12, 15, 18, and 24 inch lengths.
[2] The naming convention is as follows: 
    XX - Length in inches
    Prefix:
    BF 	- Bog flow
    C   - Connector 
    CTS - Copper tube size
    E   - Electric 
    F   - Female iron pipe
    FIP - Female iron pipe 
    G   - Gas
    H   - Heater 
    K   - Kit
    LF  - Lead free
    LBF - Large big flow 
    Q   - Quick connect 
    S   - Softener 
    -S- - Stainless 
    W   - Water
    Suffixes: 
    Certified for a maximum length of 60"
    A  - 7/8 Anderlign fitting x 3/4 FIP fittings 
    AA - Anderlign fitting at both ends 
    AF - Anderlign fitting and female fitting
    AM - Anderlign fitting and male fitting
    B  - 5/8 Anderlign fitting x 3/4 FIP fittings 
    C  - 3/4 FIP x 3/4 MIP fittings 
    D  - 7/8 Anderlign fitting x 3/4 MIP fittings 
    E  - 5/8 Anderlign fitting x 3/4 MIP fittings 
    F  - 1/2 C fitting x 5/8 C fitting 
    FF - Female fitting at both ends 
    FM - Female fitting and male fitting 
    G  - 1/2 FIP fitting x 3/4 FIP GH fittings 
    GH - Female fitting
[3] LF - Lead free
    S  - Stainless steel braid
    WH - Water heater
    (X) End fitting combination
        1 - 3/4" FIP x 3/4" FIP
        2 - 3/4" FIP x 3/4" COMP.
        3 - 3/4" FIP x 3/4" MIP
        4 - 3/4" MIP x 3/4" COMP.
    YY - Length up to 84".
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    

Pipe[G]
Watts 1/16" - 1" CLD 23 PE

[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


Number of matching Manufacturers is 1
Number of matching Products is 101
Processing time was 0 seconds